Great video and great music choice. Much better then the generic free music classics are classics because they were good when written and still good today. My board is on the way. I can’t find the info anywhere. Hopefully you will know. Will this board support 1s Hv, or will it burn it up. Also what’s the reason to cut the props down to 2 blades, longer flight time, and does it effect handling? Thanks
This video was a huge help! Because this was the same exact specs, same quad,flight controller, everything, this video will enable me to install this flight controller correctly. Highly appreciate you taking the time to make this video..subscribed and thumbs up!..thanks!😆🚁
I bought 2 of these with the DSM2 compatible receiver to use with my Spektrum Dx9 TX but although the binding process seemed to work according to the TX, (bind complete) I couldn't get any throttle on either of them.
not sure man. cause i got it locally. assume that if it's labeled as upgraded/higher performance than the stock tiny whoop one then thats the right one
saw in rcgroups that says 2 blades faster response, due to less drag and our motors being so tiny. i find the sound diff, response slighty improved, or just phycologically haha
Hello thank you very much for the videos, they help a lot, you could tell me how I can do this: ruclips.net/video/U7gtgOd4VTI/видео.html on the board of the eachine e010s, it is in the 6th minute of the video, the video man bridges the low Voltage so that the board causes the battery to cut at 3.70v instead of 3.90v. I would like to know where the low-voltage on this board is to bridge it. I repeat the board is a f3 evo installed in eachine e010s, this according to bangood, I to flash it in betaflight I had to put sp racing f3, with the option evo did not work, this just as data. Thank you very much and I await your response.
Great video and great music choice. Much better then the generic free music classics are classics because they were good when written and still good today. My board is on the way. I can’t find the info anywhere. Hopefully you will know. Will this board support 1s Hv, or will it burn it up. Also what’s the reason to cut the props down to 2 blades, longer flight time, and does it effect handling?
Thanks
Nice and intuitive tutorial
This video was a huge help! Because this was the same exact specs, same quad,flight controller, everything, this video will enable me to install this flight controller correctly. Highly appreciate you taking the time to make this video..subscribed and thumbs up!..thanks!😆🚁
Allen Nickles - wohooo. Tq bro. This is the kind of comment to motivate me to make more useful videos :-)
love the music choice!
Regards:
It is possible to use 7x20 mm motors, build the frame, other propellers and the rest leave it as is, thanks for sharing.
thanks for sharing about using 7x20mm motor too bro!
I bought 2 of these with the DSM2 compatible receiver to use with my Spektrum Dx9 TX but although the binding process seemed to work according to the TX, (bind complete) I couldn't get any throttle on either of them.
awesome video ..i set my Beecore up now no problem ...... did you cut those propellers to 2 blade or did you buy them that way?
Love the saxs. I don't mind soldering. But why do that while I can just plug and play with inductrix components.
saving as much weight as possible bro
Personally I'd rather deal with that extra 1/10th gram those connectors weigh when it comes time to change motors when they wear out.
ahhhh so tempting laaaa
lalala...
great video but the music made me think I was on hold
nice video. how can you tell if battery is low ?
it wouldnt lift off when it's low
Edward Chew doesn't it destroy the lipo if it goes under a certain voltage?
you said you used "upgraded tiny whoop motors" could you tell me what they are please, I am new to tiny whooping
not sure man. cause i got it locally. assume that if it's labeled as upgraded/higher performance than the stock tiny whoop one then thats the right one
Oh ok thx
I was asking what they were called
+HumzaPlayz - "upgraded motor". thats it. thats why
google newbee drones for bomb ass tiny whoop motors
Как настроить E010S ( FrSky),c аппаратурой Turnigy 9XR (FrSky) ?
How is the camera with a wire as antenna?
Why is it my ground wire for vtx keep on burning? I had 4 replacement already.
might be too thin
cool
why cut 2 props. why not quad props. does is makes any difference? ?
saw in rcgroups that says 2 blades faster response, due to less drag and our motors being so tiny. i find the sound diff, response slighty improved, or just phycologically haha
What mods did you make to the flysky for this
just get a frsky djt module. this FC supports frsky
No flight footage?
Here you go - ruclips.net/video/UVRFczf3VPE/видео.html
can i use flysky radio with it?
they do release flysky version but it has problem. get a frsky bro. more reliable
Edward Chew so an i6 will work with this board in the video
nope. mine is frsky version. pls get a th9x and frsky transmitter module. that flysky version has problem
Any batteries I can add flight time is only 2 min
good fake whoop flying mine should be here in 3 days from Banggod
Yeay do tag me when it's posted!
Couldn't get past the music from 40 seconds.
shit, the music hurt my ears!
Hello thank you very much for the videos, they help a lot, you could tell me how I can do this: ruclips.net/video/U7gtgOd4VTI/видео.html on the board of the eachine e010s, it is in the 6th minute of the video, the video man bridges the low Voltage so that the board causes the battery to cut at 3.70v instead of 3.90v. I would like to know where the low-voltage on this board is to bridge it. I repeat the board is a f3 evo installed in eachine e010s, this according to bangood, I to flash it in betaflight I had to put sp racing f3, with the option evo did not work, this just as data. Thank you very much and I await your response.
You made me cringe at 4:55.
hey don worry. that was towards my nail. not my skin haha