WOW! ANOTHER fantastic build! The bandsaw dowel maker is simply awesome! The flip stop that snaps into the fence, well, that is just typical of the genius creating this content 😆. EVERY other "content creator" cries about store bought stops having slop... but YOU, you just make one that blows them away. EXCELLENT work!! You should create and sell that entire sled setup online ... You WILL make a killing! Thank you again for sharing your creative genius with us all!
Dude doesn't have a lathe but can laser engrave his own rulers. 😂 Great job. This is on the to make list. Love the solutions makers come up with when a specific tool isn't available.
My God! That is the most efficient jig. It replaces 4 of my jigs. Cross cut, miter sled, taper and joiner. That is killer. Do you have a drawing of your design we can download?
Tak, Carpen! (in Danish: Tak = Thank you :o) And what an amazing jig, and so much to learn from watching your videos. Always a pleasure to see what great idea you've come up with, the precision in your work, and the always beautiful result. ⭐⭐⭐⭐⭐ (5 of 5) to you from Denmark 👍
🪄 Pełna profeska, precyzja wykonania oraz pomysłowość w warsztacie to coś co dzisiaj jest rzadkością a i zawsze można podpatrzeć nowe albo i ciekawe rozwiązanie ułatwiające życie. Pozdrawiam :D. Szacuneczek !!
This is a really brilliant design, like others have commented! Could you share what your dimensions of the sled pieces are? It looks like maybe 470mm square for the big one and maybe 100 by 470 for the one to the right of the blade? I'd love to make one! Thanks in advance!
I like this sled, and the way you made the parts, great. Iwould like to have a go at this one, but not sure on dimensions, do you have any plans? Also love the work you do
Hello my friend, you do great things for your workshop and I really like your additions and modifications to the table saw. Are you satisfied with the DEWALT and would you choose it again? Can you tell me the type of table saw you have? I'm looking for a good new one. Thanks and greetings Michael
hello. My friend, my table saw is DWE7492. I don't know about other brands as I haven't tried them. However, I am satisfied and I think that Dewalt is good even if I buy a new one. Then see you in a better video. Thank you.
Отличная работа! А мне проще упор на 3д принтере напечатать, чем из дерева и алюминия делать. Не так красиво, зато одинаково, практично. На всех сверлилках по несколько штук поставил и серийная отсверловка стала проще.
awesome useful sled. What is the size of the t-track? What is the size of the ttrack router bit and why did 't you directly use it and first made groove with table saw?
It is a t-track with a width of 8mm. The first thing I do with a table saw is to extend the life of the router bit. If I just work on it, the router bits will have a shorter lifespan. It also increases the precision of the T-track. Thanks
@@carpentak wow. thank you very much for your answer and tip. I think 8mm is the top layer groove for M8, what is the bottom layer groove width? I think 8mm - 12,5mm is good for the hammer heads and clamps that you use.
I worked with precision, so when I pulled the fence and secured it, I got an exact 90 degree angle. Of course, it is good to check it once using a 90 degree ruler before use.
@@danav4810 The distance between the grooves does not matter. Dig a groove at a suitable line. In order to set the right angle of the guide fence, the most important thing is the position of the locking knob close to the cutting line on the right. As I showed in the video, with the right angle of the fence precisely aligned, use the dowel pointer to mark the location of the hole on the fence, and then drill accurately to get the right angle. This is important.
You are my favorite You Tubr woodworker. You are very talented and a joy to watch.
Never seen anybody make handles like that. Very interesting and clever!
WOW! ANOTHER fantastic build! The bandsaw dowel maker is simply awesome! The flip stop that snaps into the fence, well, that is just typical of the genius creating this content 😆.
EVERY other "content creator" cries about store bought stops having slop... but YOU, you just make one that blows them away. EXCELLENT work!!
You should create and sell that entire sled setup online ... You WILL make a killing!
Thank you again for sharing your creative genius with us all!
Everything he makes is high quality 👍🏻
This is the perfect design for my basement. Love it. Building it next.
Si possono avere le misure della slitta grazie.
Dude doesn't have a lathe but can laser engrave his own rulers. 😂
Great job. This is on the to make list. Love the solutions makers come up with when a specific tool isn't available.
I love the design, similar concept to the Incra crosscut mitre sled.
Comme toujours...la finesse de travail de l'horlogerie. Que dire ,...superbe, je suis jaloux.
The bandsaw dowelling dock is a stunner.
The detail makes the difference!!!
CONGRATULATIONS!!!
You have taken wood working to a whole new level 👏
for me... Number 1!!!
Nice touch for angle cuts on that stop block! ❤
A very functional and simple jig, yet beautiful! Thank you so much for sharing this!
The handle shaping, ingenious. A no-brainer once you see it, but i wouldn't have thought of that.
Flipando estoy todavía y e visto el video ya varias veces
Enhorabuena
Fantastic work on all projects 🙌
Very clever dowel jig.
Absolutely BRILLIANT 👍🏼👍🏼
great jig !!!!!! 👍👍👍👍👍
I like the product that you have made awesome work
St génial ombré... 💡👍👍👍👍🙏🔝🔝🔝🔝
Amazing build from start to finish
Merci beaucoup pour la vidéo 📼
멋쪄요~!!!!! 진짜 대단하신거 같습니다~~!~
박수 박수 박수 감탄 최고십니다
My God! That is the most efficient jig. It replaces 4 of my jigs. Cross cut, miter sled, taper and joiner. That is killer. Do you have a drawing of your design we can download?
Thank you for your nice comments. I can't draw with the program. I don't have plans.
Exceptional versatile. I’ll make one definitely
Extraordinary woodworking
아주 잘 만들어졌고 내 자신을 만들 수있는 몇 가지 아이디어를주었습니다! 저는 공군에 있을 때 한국에서 2년을 보냈는데, 한국은 아름다운 문화를 가진 놀라운 사람들이라고 말하고 싶습니다! 이 빌드에 사용할 수 있는 계획이 있습니까?
미안합니다. 나는 계획이 없습니다. 댓글 감사합니다
That’s awesome, man❗️
Fantastic workmanship ... thanks for sharing.
Awesome build and sled. Great skills.
Nicely done!
Tak, Carpen! (in Danish: Tak = Thank you :o) And what an amazing jig, and so much to learn from watching your videos. Always a pleasure to see what great idea you've come up with, the precision in your work, and the always beautiful result.
⭐⭐⭐⭐⭐ (5 of 5) to you from Denmark 👍
Thank you very much for your nice comments. It makes me feel rewarding to upload a video on RUclips. I'll see you with a better video. Tak.
Awesome!
beautiful work! greetings from argentina!
Very impressed
increíble trineo para la sierra, sencillo y practico..
Brilliant. Definitely making this one. TY
Versatile Jig. Awesome filming and editing... Well thought sequences.... 👍👍
Looks great but I'm on a budget so have to adapt to my budget and make more basic styles, Lovely work though.
Alles Perfekt, mit Genauigkeiten. Schon Abonniert geworden auf ersten Blick. Weiter so.🤩
Excelente proyecto, muy práctico.
Lástima que para realizarlo se requiera de muy buena herramienta.
I'll try to imagine the idea of a compound table.
It's something that will be used for a long time, so it takes time to make it. Have a nice day.
Brilliant as always! Thanks for posting. :-)
Bravo très pratique !👍👍👍👍👍👍👏👏🖐🖐🖐🖐🖐🖐
Que manera de gozar de esta maquinaría y de esas MANOS.
Gracias.
What an awesome video, you are a true artisan and inspiration to woodworkers. Thank You for this awesome informative video ; )
Very good design Takkie!
If I walked into this dude’s work shop I would need 15 minutes just to shut my slack jaw.
😳
Tap Tap
🪄 Pełna profeska, precyzja wykonania oraz pomysłowość w warsztacie to coś co dzisiaj jest rzadkością a i zawsze można podpatrzeć nowe albo i ciekawe rozwiązanie ułatwiające życie. Pozdrawiam :D. Szacuneczek !!
Dziękuję za miłe komentarze. Życzę zdrowia i szczęścia.
Awesome
영상이 도움이 많이되네요
감사합니다^^
Ptfe tape ghj는 어디서 구입하나요
감사합니다. 네이버에서 검색해서 구입했던것 같습니다.
Как всегда всё супер!!!👍👍👍
Awesome!
This is a really brilliant design, like others have commented! Could you share what your dimensions of the sled pieces are? It looks like maybe 470mm square for the big one and maybe 100 by 470 for the one to the right of the blade? I'd love to make one! Thanks in advance!
The left side is 470×600, the right side is 320×600. Thanks.
@@carpentak thank you!
maravilloso!!!!!
Nice idea i like this jobs
Master 👍👏
I like this sled, and the way you made the parts, great.
Iwould like to have a go at this one, but not sure on dimensions, do you have any plans?
Also love the work you do
I have no plans. sorry and thank you
Hello my friend, you do great things for your workshop and I really like your additions and modifications to the table saw. Are you satisfied with the DEWALT and would you choose it again? Can you tell me the type of table saw you have?
I'm looking for a good new one. Thanks and greetings Michael
hello. My friend, my table saw is DWE7492. I don't know about other brands as I haven't tried them. However, I am satisfied and I think that Dewalt is good even if I buy a new one. Then see you in a better video. Thank you.
Good Idea the ptfe 👍 where buy this object
Nice and talented
Отличная работа! А мне проще упор на 3д принтере напечатать, чем из дерева и алюминия делать. Не так красиво, зато одинаково, практично. На всех сверлилках по несколько штук поставил и серийная отсверловка стала проще.
I just came across your video this evening. Really imaginative and well done. Can you provide the dimensions for locating the grooves? Thanks. Nick
There are no data with dimensions for this. I'm sorry. And thank you.
Mantap bos,,,,
Can't I just buy one from you?
awesome useful sled.
What is the size of the t-track?
What is the size of the ttrack router bit and why did 't you directly use it and first made groove with table saw?
It is a t-track with a width of 8mm. The first thing I do with a table saw is to extend the life of the router bit. If I just work on it, the router bits will have a shorter lifespan. It also increases the precision of the T-track. Thanks
@@carpentak wow. thank you very much for your answer and tip.
I think 8mm is the top layer groove for M8, what is the bottom layer groove width?
I think 8mm - 12,5mm is good for the hammer heads and clamps that you use.
@oksuztepe Maybe that's right.
Like266,...
영상 잘 봤습니다!! 또 오겠습니다!!
Hola planos con medidas se pueden agregar para que se pueda hacer en una máquina de mi propiedad
You are brilliant to watch in action! But still no plans? You could be making much money 💵.
항상 잘보고 있습니다.^^ 궁금한게 있어서 여쭙니다. 가운데 t트랙 라인 교차지점에서 t볼트가 돌아가며 이동이 되던데
가능한가요? T볼트를 갈아서 만드신건가요? 저는 t트렉레일로 따라 만드러 보려합니다. 감사합니다.^^
네 가능 합니다. T볼트는 갈지 않았습니다. 다만 t홀이 좀 헐렁하게 여유가 있어야 합니다. T트랙으로 한다면 티볼트와 싸이즈가 딱 맞으니까 아마 t볼트를 상당부분 갈아내야 할 것 같습니다. 감사합니다.
@@carpentak 김사합니다
^^
Красавчик
Отличная работа! Какой толщины использовали фанеру?
18mm 입니다. 감사합니다.
@@carpentak большое спасибо за ответ! У woodpeckers смотрел похожую приспособу. Буду повторять Вашу.
영상 항상 잘 보고 있습니다.
저도 테이블쏘를 같은모델인 7492를 사용하고 있습니다.
하지만 제로 인서트를 아직 만들지 못하고 있는데 7492모델의 제로인서트 제작관련하여 영상 부탁드려 봅니다.^^
네 감사합니다. 기회가 되면 해보겠습니다. 우선은 부엉이공작소님 영상을 찾아보시고 참고해 보세요. 도움이 되실겁니다.
Do you have a plan for this or at least share all the measurements. Thanks
Sorry, no drawings.
It's okay sir, I want to duplicate your sled
Is is not simpler to use a dowel for the handle?
You should change your channel's name to "Double Tap Crafts".
Well done! You're very clever...
Good Job. One question: the table only runs into one channel - is it stable enough ?
A single table is also possible, but two tables are much better. Make it two if possible.
Show de bola meu amigo parabéns pelo trabalho ganhou mais um inscrito e deixo aquele like valeu👍🏻👍🏻💯💯🤝
Nice Job, how do you make sure, that the fence is 90 degrees to the blade when fasten it ?`Smörebröd :)
I worked with precision, so when I pulled the fence and secured it, I got an exact 90 degree angle. Of course, it is good to check it once using a 90 degree ruler before use.
mi puoi dare le misure della slitta grazie
Merci
Класс!!!👍👍👍
Do you have plans available for the jigs you make?
I can't make a plan. Sorry
Подскажите пожалуйста, что за винт используете для упора на линейке ?
used t-bolts. It is t-track only and sold with t-track. There is a link to the video information.
@@carpentak болт для упора аллюминивого , что на 20:22 крепите ?
@@ВаартилампийУпович It is an M5 wrench bolt.
👍👍👍👍
good work. What kind of wood do you use as multiplex?
thank you It is walnut wood.
@@carpentak isn't the walnut multiplex panel brown...? I would have thought rather linden or birch panels but without certainty...
@@j.b.6203 Sorry I misunderstood and answered wrong.
The plywood is 18mm birch plywood as the base panel.
Walnut wood was used for the handle.
Ljubav prema zanatu... Posvećenost
Какие размеры, кроме толщины фанеры?
This is 18mm thick plywood
Do you provide any plans with any of your builds?
No I can't make plans.
@@carpentak Would you just give the distances between the grooves please? I suppose this is important to get good results for the cuts with the square
@@danav4810 The distance between the grooves does not matter. Dig a groove at a suitable line. In order to set the right angle of the guide fence, the most important thing is the position of the locking knob close to the cutting line on the right. As I showed in the video, with the right angle of the fence precisely aligned, use the dowel pointer to mark the location of the hole on the fence, and then drill accurately to get the right angle. This is important.
Where can I get plans for this?
I can't make a plan. So I don't have a plan.
Is it for sale?
No, not for sale.
Могба етт ручка крутит на дрел проста и 10рас бистрее и качественнее закончить
성년기 장애우를 위한 사업장을 구상하고 있습니다. 목공방을 계획하게 된다면 선생님 같은 분의 도움을 받고 싶습니다. 종은 영상 감사합니다.
Show!!
Where to get plans, if any?
I don't have plans. can't provide that.
excuse me are you gcode laser please. (cm)
I didn't understand the question correctly. My laser uses the Lightburn program.