Finally, a man who's willing to go behind the curtain and talk about the things the other videos didn't (in fact some of the videos go out of their way to say 'these are all factory adjustments, don't mess with them') It turns to that those adjustments you mentioned were the ones that eliminated the chattering (big screw / little screw on side). Thank you very much.
Brother!!! I was doubtful that I would find the information that I was looking for before I searched. I've had my masters for over 14 years and I didnt want to get rid of them. I cant say enough how thankful I am for this video!!! Cheers and thanks!!
Sometimes its hard to understand what he is trying to say , but you can tell this dude knows how to disassemble his clippers and put them back together. Thanks , much help👍🏽
this video was most definitely helpful. In cosmo school and they have been real noisy. i fixed the tension screw and they run real smooth. thanks for the video.
Thank you I bought an Andis Master in like new condition still in box but blades weren't moving for $30 for parts as is. Fixed with this video and got my self some good running clippers for bargain.....Thanks Bro
I watched your video and it was very helpful, I played with my machine till I got it working good, removed the lower tab as well to get a closer cut. thanks garrick white
Thanks! Mine purrs like a kitten now. I adjusted the tension screw and the left to right on the side. Would not have known that without this video. God Bless.
Thanks brother!!! I feel like a heeeehaaaaaa dunkey lol smh i had my andis for 11 years. And how i even forgot bout the two screw on the side. Thanks agein brother!!
I love my master dude. And I had them in the morgue for about 5 months debating if I should throw cremate them, bury them or just hold on. I'm glad I held on brother thank you 🙏🤜🏾🤛🏾🤜🏾🤛🏾
i get that clatter noise after I do a haircut and I always thought it was because hair was getting stuck somewhere in the blade while brushing it off and that was the reason for the loud noise I get after a cut, Im excited to go into work tomorrow and try tweeking it a bit with these tips to see if it gets rid of the sound!!! Ill let you know how it works! wish me luck!
My issue was the power screw which is the smaller screw on the right side.. it was slipping it took me many years to figure this out but today I put plumbers tape around it after I cleaned it real good. It's nice and stiff now it will never move again. But taking the Clippers completely apart is a good thing you will quickly learn how it all works together just by looking at it I will suggest getting a headlamp that you can put on your forehead to work on it.
Hey just a tip for people trying to figure out why there clipper is clattering is to make sure you attach both blades to original position, i was testing them without it after adjusting it and it would continue to make noise and after i installed it, it was fine
Thanks alot bro you saved my masters, I took em apart to do a deep clean and when I put everything back in they where clicking like a MF I gave up on them for about a month, turns out it was the cutting blade holder, it was set to far back and it was rubbing against the metal on the masters.. all I did was adjust it and it was good as new !
i believe I may have the same problem with mine. i bought a used set that needed a replacement blade because of a chipped corner blade tooth. Put new blades on and there was still the metal on metal sound. vibration and clatter.
Thanks man I'ma try to adjust it one more b time and if the problem continues I'm definitely going to try the grit sand paper because I think the fade blade is too sharp
That's the problem the points on the end of the blade is to pointed and sharp because that blade is very thin file the points down a little not to much but continue to do it until you notice it stop snagging the pores and be sure to do the ends on the blade because that's what snag the most
How do you make it to get to the first notch? I've seen a lot of videos complaining bout it, and I just bought a pair but it seems like I can't just get them to get to the first notch. Thanks in advance
Mine just started giving me problems ,I've tried to adjust the screw on the side but it slowly turns back to the way it was previous and starts making that loud noise again!!
lobe you're vids but I have a question... everytime I use the tension screw to adjust the cutter blade it goes right back to make the loud clatter please help... how can I fix this
1 timedime. If you have tried tuning it by the small screw on the side with no success, then you'll need to tune all the way. You'll need to take the lid off, next takes some neddle nose pliers and turn the bigger screw on the side in all the way, then turn it one full turn back. After that loosen the tension screw in the clipper but don't take it out. After that use a screwdriver to lift up the magnetic arm from the top of the clipper where the two allen screws at. once you do that turn on the clipper, it'll be be running loud, but start turning the tension screw back in and you'll start hearing the clipper quiet down. Next tune it from the side smaller screw until running full power, put lid back on, oil blade and you're set..
What tool do I use for the little holes tho? I know I have to loosen the flat head screw than tighten the other one with the holes, but what tool do I use for it?
Mine keeps getting caught in like my pores by my temple how would I stop that it's pretty painful is it just that the blade is to sharp I have the fade master blade on
Finally, a man who's willing to go behind the curtain and talk about the things the other videos didn't (in fact some of the videos go out of their way to say 'these are all factory adjustments, don't mess with them') It turns to that those adjustments you mentioned were the ones that eliminated the chattering (big screw / little screw on side). Thank you very much.
Garrick is an Andis Master Ninja! This is a huge help. Thank you Sir!!
Brother!!! I was doubtful that I would find the information that I was looking for before I searched. I've had my masters for over 14 years and I didnt want to get rid of them. I cant say enough how thankful I am for this video!!!
Cheers and thanks!!
This helped me so much!! I was about to give up on it but this solved my problem! Very knowledgeable, thank you!!!!
no 🧢 u all over the place with this video, i dnt even know where to start to fix mines b/c u are addressing so many areas of concerns
Sometimes its hard to understand what he is trying to say , but you can tell this dude knows how to disassemble his clippers and put them back together. Thanks , much help👍🏽
This helped a ton. Got a set of 70 year old masters that had way too much noise. This made this run like new. Thanks dude!
Finally somebody explained the parts of this clipper that I needed to hear.......Thanks.....I'll soon get to fixing on my Fade Masters
this video was most definitely helpful. In cosmo school and they have been real noisy. i fixed the tension screw and they run real smooth. thanks for the video.
Appreciate the content. My masters is working good as new now 💪🏾 God bless
Thanks for the clipper tune up lesson. Andis master is unrivaled in cutting and now I fixed mine up instead of buying a new one
Brother you are a life saver. this tutorial saved me some money and time and my andis! Much. Love. 👍👍👍
Thanks bud! Saved me some money not having to buy another set of clippers. Great info.
this is exactly what I needed. My clippers are working like new.
Thank you I bought an Andis Master in like new condition still in box but blades weren't moving for $30 for parts as is. Fixed with this video and got my self some good running clippers for bargain.....Thanks Bro
U helped me a lot to get my andis masters back working after I dropped them
Couldn't find anything on here to help me. Your video told me everything I needed to know. Thank you
Thanks man, I really appreciate it. I couldn't figure out why my clippers weren't acting right! This helped out plenty.
thank u so much brother they stopped chattering very smooth and quiet I cant say enough how much this helped
I watched your video and it was very helpful, I played with my machine till I got it working good, removed the lower tab as well to get a closer cut. thanks garrick white
Wow awesome video man! Got my rattling problem fixed super quick!
Thank you for this video! I was close to just throwing mine in the trash but I think this troubleshooting did the trick.
Thanks bro you really helped me out I was at a complete loss.
Thanks! Mine purrs like a kitten now. I adjusted the tension screw and the left to right on the side. Would not have known that without this video. God Bless.
thanks for the video bro. much appreciated by many barbers. -cali barber
Thank you for this video!! Helped me so much!!! I fixed my clippers.
Thank you sooooooooo much for the instruction. I was able to fix my Andis Master perfectly from your video.
Thank you! I couldn't get these to quiet down for nothing!
That's this video is the best I was able to fix my clippers in less then ten mins. Thanks for the help bra
thanks man, was able to fix the pressure screw because of this video
Great video. Really got masters on point
Thanks brother!!! I feel like a heeeehaaaaaa dunkey lol smh i had my andis for 11 years. And how i even forgot bout the two screw on the side. Thanks agein brother!!
Man I wanna thank you so much for this man if I could pay you I would thank you so much uncle!!!!
3:02 This solved the issue I was having. Really appreciate this video, man, it helped a lot.
4:22 got mine sounding just like his! Thanks brotha🙏🏾
Thank you very much for this, sir. One quick adjustment and my silver Master is back in top form.
Your welcome
7 years later this vid helped me. The more you know
I love my master dude. And I had them in the morgue for about 5 months debating if I should throw cremate them, bury them or just hold on. I'm glad I held on brother thank you 🙏🤜🏾🤛🏾🤜🏾🤛🏾
I'm not gonna lie after watching your video I fixed my Andis masters after them not working for over 5 years
Preciate the help, God bless brotha🙏🏽
Bruh you are a life saver. Thank you!
thank you this helped me a lot with the right explanation
Thank you sir. Very helpful 👌🏾
i get that clatter noise after I do a haircut and I always thought it was because hair was getting stuck somewhere in the blade while brushing it off and that was the reason for the loud noise I get after a cut, Im excited to go into work tomorrow and try tweeking it a bit with these tips to see if it gets rid of the sound!!! Ill let you know how it works! wish me luck!
Thank you. You are awesome.
This helped me soo much, thank you!!!
It worked. Thanks.
helped a lot.,. got my 5 yeat old machine back to work like new🔨💣
Video was a lot of help brother, thanks
@eric ellis sr you're welcome and thanks for the compliment
Worked thanks!
Thank you for this video, it was so helpful!🙏🏽
Hannah Dorton u cut hair
I like how you call them the cutter blade and the calm blade.
man, that was a great informative video
Thank you so much!
Very helpful. Thanks.
My issue was the power screw which is the smaller screw on the right side.. it was slipping it took me many years to figure this out but today I put plumbers tape around it after I cleaned it real good. It's nice and stiff now it will never move again. But taking the Clippers completely apart is a good thing you will quickly learn how it all works together just by looking at it I will suggest getting a headlamp that you can put on your forehead to work on it.
You're welcome glad I could help
This guy is the 👑
Hey just a tip for people trying to figure out why there clipper is clattering is to make sure you attach both blades to original position, i was testing them without it after adjusting it and it would continue to make noise and after i installed it, it was fine
Thanks for the video brotha it help me out good
This video saved my clippers. I was close to trashing it
Thank you sir 💯
fantastic video :)
good work my dude
Thanks big bro!!!
Thanks alot bro you saved my masters, I took em apart to do a deep clean and when I put everything back in they where clicking like a MF I gave up on them for about a month, turns out it was the cutting blade holder, it was set to far back and it was rubbing against the metal on the masters.. all I did was adjust it and it was good as new !
Glad they're straight
i believe I may have the same problem with mine. i bought a used set that needed a replacement blade because of a chipped corner blade tooth. Put new blades on and there was still the metal on metal sound. vibration and clatter.
+1985themovement you tried tuning it with the small screw on the side
@TL Just adjust it properly and it will be fine
Do have a video on how to zero gap your andis fade master?
Does it eat into your guards when zero gapped great tutorial brother
I had to turn the screw on the side. I was about to throw mine away. Good looks
Thank you sir
Problem solved. Thanks.
Do u have a video to fix the lous noise the cordless andis master makes? My clips run so loud!
,@Jorge Perez thanks and barber luv
Thanks man I'ma try to adjust it one more b time and if the problem continues I'm definitely going to try the grit sand paper because I think the fade blade is too sharp
That's the problem the points on the end of the blade is to pointed and sharp because that blade is very thin file the points down a little not to much but continue to do it until you notice it stop snagging the pores and be sure to do the ends on the blade because that's what snag the most
Make sure to round the ends off they're are square now and those points is what doing the snagging
How do you make it to get to the first notch? I've seen a lot of videos complaining bout it, and I just bought a pair but it seems like I can't just get them to get to the first notch. Thanks in advance
Thank you the noise stopped!
Cwippers
Perfect
Mine just started giving me problems ,I've tried to adjust the screw on the side but it slowly turns back to the way it was previous and starts making that loud noise again!!
I wanna know see what you did to zero gap.
Great video thanx for the info
You're welcome!!!
Garrick White bu makinayı nerde bulcaz
Cemil Durak Eger abd bu alabilirsiniz
my trimmer is getting heated up.what would be the problem
Thats a WHOLE lodda dogone cladda goinzone bra
halfull thanks
I love you my brother
Can u do a cordless
great video. how to I get my masters to stop the whistling or squeaking noise? and it happens about a min in to my cuts
you tried oiling the blade
lobe you're vids but I have a question... everytime I use the tension screw to adjust the cutter blade it goes right back to make the loud clatter please help... how can I fix this
adjust the small screw on the side as well
💯🙏🏼
question when you're cutting blades slows down or stop does it mean the tension is 2 much and what can I do to stop it from happening ?
1 timedime. If you have tried tuning it by the small screw on the side with no success, then you'll need to tune all the way.
You'll need to take the lid off, next takes some neddle nose pliers and turn the bigger screw on the side in all the way, then turn it one full turn back. After that loosen the tension screw in the clipper but don't take it out.
After that use a screwdriver to lift up the magnetic arm from the top of the clipper where the two allen screws at.
once you do that turn on the clipper, it'll be be running loud, but start turning the tension screw back in and you'll start hearing the clipper quiet down.
Next tune it from the side smaller screw until running full power, put lid back on, oil blade and you're set..
What tool do I use for the little holes tho? I know I have to loosen the flat head screw than tighten the other one with the holes, but what tool do I use for it?
a pair of neddle nose pliers that will fit the holes
Good vid right chyah
Mine keeps getting caught in like my pores by my temple
how would I stop that it's pretty painful is it just that the blade is to sharp I have the fade master blade on
Look at my video on wahl balding clipper snag & pulling do the same exact thing with the fade master blade only the comb blade not the cutting blade
hey garrick, what if my masters only clatter everytime i oil them up? even then, i try to adjust them but it keeps clattering :/
MCFriedChicken1 same here man.... got it brand new. .. after 4 cuts... I oiled it then started to make a noise.. I loosen the side screw didn't work.
I've played with the tension and the side screw but my masters seem so weak. I can easily stop them with my fingers
Have you tried screwing the other bigger side screw in all the way then a quarter turn back check the video out again when I talk about that part
how can I loosen bottom screw on right side of cippermaster.the one under the flat head screw
Some needle nose plies while do the trick
Thanks
Still wasn't the problem very weak when I turn it on
Son this a creat video but maaaan it’s blurry as heaaal Sir 😂😂😂😂😅
what size screw do u need to hold the blade in place?
Ci Se you will have to contact andis and order it
Garrick White thanks. was about to go to home depot and look for it
Quick question guys, i zero gapped my masters and now its eating my magnetic guards. How can i fix this?
you may have them set a little too close. try dialing that cutter blade back just a hair.