Mikrotik dynamic mesh proactive mode
HTML-код
- Опубликовано: 29 сен 2021
- Video begint op 4:23
In deze tutorial configureer ik een mesh netwerk. Daar ik problemen had met deze configuratie met RouterOS 7 ben ik overgeschakeld naar RouterOS 6.48.4. Persoonlijk ben ik geen fan van een mesh netwerk maar wil een antwoord geven op een vraag die ik heb gehad. Hopelijk leren jullie hier toch wat bij. Наука
Espetacular!!!! Muito obrigado por compartilhar seu precioso conhecimento meu caro. Desejo muita saúde, felicidades e sucesso sempre. Um grande abraço
Obrigado pela sua resposta positiva. Desejo-lhe tudo de bom e muito sucesso.
Saudações
Jean Pierre
i do believe wds-slave works similar to ap-bridge, and it has in this setup wds-slave because you playing with mesh/wds
A wireless connection is established between the access point and the WDS slave.
This is done by means of the hardware radio interfaces.
The WDS interface works as an access point indeed. But because of the mesh configuration you get a kind of layer2 routing.
I hope this is somewhat understandable.
great video! can you make a video ob roaming and ap's are wired connected ?thx
Hello, I'll try to put together a scenario with this topic in the future.
regards
Jean-Pierre
@@Wirelessinfopuntbe THX!
Kan je een mesh netwerk maken als je de ap's bekabelt hebt allemaal?
Zo ja wil je daar ook een filmpje over maken?
Beste Richard, persoonlijk zou ik een roaming netwerk configureren door overal dezelfde SSID te gebruiken en verdelen over de 3 bruikbare kanalen 1,6 en 11.
Groeten
Jean-Pierre
Thank you for your nice video,
I followed the lesson and understood! without understanding the language "its good" ..
I have some questions! Is Portel mean the server? What is the mechanism that connects devices slaves with a server through a cable by ether1? or what.
Best Regards.
no the portal is not a server but you can compare it with the root bridge in the spanning tree protocol. Both devices are wirelessly connected to each other and each broadcasts the SSID. The WDS station receives the data and retransmits it. This results in a halving of the data throughput. I hope I expressed myself well here.
@@Wirelessinfopuntbe OK.
Can you summarize this lesson for me! by writing it on comment as its details so that the (example of my idea), portal ether1 connect to first wds slave "Router" by ether 1 or wireless.. because I can not undrestanded the lanuage
Hello Ayad, i will be answering shortly. Have some patience please.
thanks
JP
@@Wirelessinfopuntbe Hello My teacher,
Ok. Have all time
Regards
can you explain on english what wmp-preq-destination-only does
With PREG-destination-only, the WDS slave will respond to the Path request from the portal but will not continue broadcasting it to other WDS slaves. That's why I'm checking that out here.
Greatings
Jean-Pierre
Would be helpful if it was in English.
English Please....
Sorry that my tutorials are in Dutch.
This is because I don't speak English well.
I hope you don't blame me for this.
I wish you all the best.