Thank you Gary. Incorrect color reproduction is the result of many possibilities. Hope my videos will help. Check out the Color Management PLAYLIST. It covers all the aspects to provide with that " What You See is What You Get" condition.
Thank you I checked the print preview box and the it no longer prints in pink, thank you so much it took some hours to figure this out. GREAT HELP. GOD BLESS.
P800: It was too Magenta out of the box. I was using Print Preview. Thanks for sharing the tip! Why on earth wouldn’t Epson warn users rather than have customers so frustrated with their products???
Jose Rodriguez Also, this was the first time changing the ink since I bought it several months ago. I noticed that after I replaced my cyan and magenta, the print quality wasn’t as good as before. I could see a cyan tint on my artwork. I took the cartridges out and gave it a better tap and shake. I also pushed in on the cartridge plunger a few times that is located on the back. Now everything is back to printing perfectly!!
Gday Jose, Just wanted to say you solved all my problems with my vapor Apparel sublimation printing. Turn Off the setting in color matching. No more bleed or magenta coming from the black ink. Many Thanks.
What worked for me is that the Blue was missing on the nozzle check, I just took the blue cartridge out and put it back in 2 times and it started working again.
Sudden color balance change is always due to a particular cart or carts not providing required ink flow. But you didn't mention what printer this occured on. That would help.
Bingo! That did it. I had the identical problem. Removed the blue cartridge and put it back in 2 times. My pics are coming out great once again. My printer is an Epson SureColor P400.
I have a HP DESIGNJET 450C with this issue. All prints are PINK (Magenta)? Could you help with a link to the video for colour management with drivers etc...
I have never owned an HP printer whether office type or for photography but I assume color management would remain pretty much the same as with any other brand. The first thing I would ask you to do is to print a standard image simply letting the driver control everything use a photo paper compatible with your HP printer Choose the matching Paper type in the drop-down menu in the driver. if you get a neutral result then your problem lies with your own private images. By the way when you open a standard image you never edit it regardless of what it looks like on the monitor. Specially if it is not calibrated. There are so many aspects to this that I cannot begin to begin to point you in any particular direction but you first need to establish that the printer by itself can actually print neutral also perform a nozzle check to determine if any of the color channels are not printing 100%
I use a Canon MG5650 with Photoshop cc. If I print a jpg image on plain paper the black is black. If I print the same image on the glossy setting the Black is deep magenta. I let PS manage the colours. I have changed the black ink cartridge and run a test page OK. Help!!!
First of all when you print on Plain paper that printer is probably using a pigment base black ink and when you print photos it will revert to a photo type Black Ink which is usually dye based and is not true black. It's actually a deep purple. The driver needs other colors to composite and create a true black. You should try to print with just the driver and see what happens since you're using Photoshop to manage color are you turning off color matching in the Canon driver and then using a matching paper profile in Photoshop? If you are not doing that then you're double profiling
When I print from Adobe Acrobat Reader it has pinkish hues, but when I print same picture from Word it is totally normal. Print preview is is turned off on printer properties, but still shows when I hit print from Adobe. Do you know what steps I need to take?
Another great video as always, found it hiding in the playlist. As an OSX user, I have to agree that with every new update Apple just messes up the printing drivers, and sometimes they dont ever bother to correct the errors. This problem usually effects more of Canons then Epsons. I usually use my own profiles as I print on range of media with different types of inks, but I can not use Mac ICC profiles on Windows or other way around, so I have to create separate profiles. To disable printer controlling color profile, in color matching part of the printer driver I just select Generic RGB which disables printers controls of colors and then use the printing program with appropriate profiles to print. On Windows disabling printer color control is far simpler and easier.
I no longer have one but I think there is an Advanced tab on the main driver preferences window when you then click on ICM and then no color management or simmilar term.
I am printing my decals using my Canon iP2770 for my customized Hot wheels. Since I'm using a water transfer paper it needs Acrylic clear coat after printing, and after drying it up for like 12 hours it starts to have pink colors. I am not really sure if it is reacting with the Acrylic paint or is it the ink cartridge itself. Please help. :/
I am afraid you got me there. Sprays are usually solvent based and can indeed cause weird effects on water based ink printed items. I'M sorry that I can't help you out with a possible answer to this.
Sorry for beating this horse. But I can't get my Epson 3800 to print properly on RR Satin. It does fine on Glossy paper and Epson luster. Yes, I watched the Epson videos on the 3800 and have management and other settings set perfectly. I also did a nozzle check and it came out perfectly, even the yellow channel. Did two wasteful cleaning processes and it still has a magenta cast. I am not using a "preview" when printing. As I mentioned I am using the correct printer profile for the paper and no color control in the print module so there are no conflicts. I have reviewed the settings over and over again and followed Epson video precisely and nothing gives. any ideas will be appreciated.
Why not try it simply letting the driver control color and choose a semigloss paper choice in the driver and see if it a problem with their Profile. If it still prints magenta then it is the paper. Not much I can suggest as I am not there with you.
@@cheo1949 YOU - ARE - A - GENIUS! Thanks for your help brother. I was stuck on using the profile for the paper, "which is what we are supposed to do", lol. It's still not perfect but it effeminately looks better. Still trying to get it to the next level, now if I can get my black to come in more black that would be great.
Hi i have a problem in a canon Duco 252 Color Machine,.. is not printing in the center, i check with the color quality, Text shaded if color is pink but it print come light pink in center, how to recover the machine printing quality please help me to get a solution
i have a epson et 2750 ecoh tank printer using the ink that came with the printer and epson ultra premium photo paper glossy new out of the box only been using it about a month or so every time i run a print of a picture i end up with a blue line at the bottom some times blue and purple line but if i copy a photo from the scanner no problems ive tried reinstall of the drivers and software still the same problem even tried using a different computer with just the drivers after watching your video i went to device and printer selected preferences more options at color correction i selected custom and hit advance and selected no color adjustment hit ok and printed a picture no blue or purple came out just right for the record under color control it gave me color mode which showed adobe rgb but i dont think that was the problem but disabling no color adjustment might have done the trick thanks
Hello Jose. I have a Canon Maxify, MB2720 that prints pink/magenta instead of the color red. The printer properties box and printer driver area do not allow me to adjust the colors, etc. How would I disable color matching on this particular Canon model?
I have an old Kodack ESP C310 I changed the color ink and now have a pink tint in only the black and white print....don't know what is up, I have never had any problems with this printer before. I mention this here in the comments because Kodak isn't addressed in your video.
I came on here for help as in some cases was printing pink instead of blue say in a pair of shorts, I am printing from and Apple iPad and was fine until recently ☹️
There is "Something" about magenta casts on prints done on a MAC System and no one has been able to put their finger on WHY! Sorry but I am on Windows 10 running 13 pro level photo printers and I never experience that.
Hi I have an Epson ET-2750 and we are soo confused, it keeps printing everything Magenta. If I print a pdf it prints black but has a hint of red in some spots, but if I print a picture of a document either from my laptop or my phone it prints magenta. I'm confused on how to fix and I've tried so many things please help!
Always run a nozzle check any type you do not get the proper color rendition. Then if needed, run a cleaning cycle. Now say pdf prints black. And that's normal? I need to know your actual settings from your computer ( forget phone that is not color managed ) as well as your printer's driver. Assuming your inks are flowing 100% as determined by a nozzle check, off color is due to work flow inconsistencies.
I have an older HP Deskjet printer that is printing very inaccurate colors for some of the color pallet. It's a brand new color cartridge (non HP). When I print the colors in DRAFT form, the colors basically match the color pallet (but they are light of course being in draft). But when I print the normal print intensity, many of the darker shades flip to another color entirely. So a dark blue on the original pallet becomes a hot pink or maroon on the printed page. A darker magenta on the pallet becomes an olive green on the page. A darker green becomes a blue or purple, and a darker yellow, gold or orange becomes purple. Any suggestions Jose?
I have no idea as you are not using OEM inks. And what is a Pallet? I also do not use any HP Printers. You need to double check your driver settings and also run a nozzle check to see what colors channels may not be printing. That would cause crazy color shifts.
Im allready so fucking pissed about my stupid fucking printer. So cannot sit down for half and hour and listen to anekdotes about chefs pissing in a pot full of stew.
Hi! Please answer my question. I would really appreciate it. I am 13 yrs old and I am trying to fix our printer (Epson L3110) because my dad is not home and nobody else knows how to fix it. So at first my printer wasn't printing yellow it came out as pink then i tried to do the nozzle check. It only showed the colors black pink and blue bars. So i clicked the option clean after that it still didn't work so I tried it again. But after that the color blue also won't print so now it only prints the color pink and black. Please answer... THANK YOU!!!
Well your lines or Print head are not allowing ink to flow from the tanks either because of clogs. Are you positive you have ink in the tanks? Sorry but I do not use those printers as we only work on PRO Photo Printers here.
Your printer uses dye inks which hardly ever clog unless it has sat for a long time. Open up the printer top and long at your inks lines and make sure you have a solid yellow magenta cyan and black without any gaps ( Air ). Other than deep cleanings followed by nozzle checks.
I have been printing with my new Canon Pixma pro 10 successfully for a full week. Beautifull and accurate colors. Randomly I ended up getting 1-2 blue-ish prints and ended up resolving the issue with a restart. Now a week later I started getting magenta looking print all of a sudden. NO changes whatsover in my setting or the profiles, same prints, different color. I followed the entire step to make sure there was no dual profiling, turn off color matching. I printed with photoshop, photo print pro and lightroom. Same issue. I did nozzle test and nothing is clogged. I am truly clueless, Please help?
I have an HP 4630, I put in a new HP 61 Tri color cartridge and after 30 good color pages (I was printing digital prints), my brown turned pink. Will I need to replace my cartridge for one missing color after 30 pages? This is my first time printing digitals.
Yes. That's the problem with tri color carts. Are using genuine carts? That seems pretty low. Also I do not work with up as they no longer produce real photo printers. Only Canon and Epson.
Hi si I have a Epson printer l350 it is print only black colour. After cleaning flusing not print any dot of magjenta cyan yellow. I did head cleaning manual it is free but not print any dot of colour m c y. Is there board problem or other. Help me sir
That is what will happen after only printing using black ink for a long period of time. All I can tell you is to continue trying to clear out the clogged CMY channels. At the worst you would have to begin again with a fresh printer. Hopefully not.
Run your nozzle check which will show what channels are blocked either due to lack of use of using bad cart not originals. If you are using original carts run a cleaning cycle and print another nozzle check. if you are using compatible carts, stop. Until your print head is cleared, DO NOT print any more images of you will permanently damage your printhead.
As stated in the video to summarize and save time A few reasons. 1. Double color management, tell printer driver to stop controlling color. 2. Blocked print head nozzle. Epson print viewing should be turned off.
You are not using OEM inks right? And may you need to run a Nozzle check to determine what color channel is not printing or feeding ink. Very likely your Cyan and yellow are not printing.
Hello, I have the Epson ET-2750 and whenever i try to print black on glossy paper. after it dries the black becomes purple. This is not the case when I select to print in matte or plain paper. However, if i select matte paper to print on glossy, although it will be true black it does not properly prints on paper making it easy to scratch off. Please help I have wasted so much time, paper and ink trying to figure this out.
Can't get video to play. I have new router and 100Mbps connection. Other RUclips videos play fine. I have a Canon mx890 and eBay ink. Everything has pink hue. Thx!
Just purchased and successfully set up an Epson EcoTank 2760. I am shocked at how terribly washed out all the colors appear, particularly red. I ran a nozzle check and everything is perfect. Setup and installation was easy. But the color quality is baffling. I've tried printing the same image from Adobe, GIMP, Gravit, Windows Picture Viewer, etc. Same terrible results every time. I did my homework (reviews, YouTUbe, etc.) on this printer and no where can I find mention of this problem. I am bringing this back tomorrow without hesitation. I know from past experience that the exact same image printed on an HP Office Jet 3830 Series printer produced more accurate, vibrant colors compared to the on screen image, for half the price. I thought moving into the non-cartridge world would be proactive, but this is a joke.
It's the inks my friend. They are very cheap. Not much you can do about it. I almost bought an L series printer just to have one to review and I decided against it.
You're very thorough. Thanks for taking the time to put this up here for us. Unfortunately, none of these fixes worked for me. Nozzle check reveals all cartridges are working. Went to the article too. Bummer. I have the Epson Artisian 730 and I'm trying to print a great 1940s black and white photo of my old neighborhood in the Bronx but, it's pink, no matter what I do. Anyhooo...
Wow. AND you get back to us? Pretty cool guy. OKAY first of all, I didn't have "Print Preview" selected so, that wasn't it. Many found that to be the solution but, it wasn't for me :( I'm working from a PC and yes. All 6 colors in the nozzle check show up fine. Actually,that was the first thing I checked. I never had this problem till a week ago when I tried to print this picture. Tried other pictures and the same magenta hue. But, it doesn't show pinkish when printed on my ancient HP 1200 PSC and, it was printed from the same picture viewer program Xnview. I was willing to download the file on their website but, it's for Photoshop. I don't use Photoshop. I have it installed but, never use it. AND, this just happened so... Can't think of anything that could have caused it. Also in Advanced tab under: "Color Management" I ticked: "Color Controls" Color Mode "Epson Standard" and changed Gamma to "1.8" as the Epson website recommended but, no dice. So I then selected "ICM" and "Off (No Color Adjustment) but that too did not help.. I also changed it from "best photo" to "photo" thinking to reduce saturation I guess. That helped on the HP but, not on the Epson Artisian 730 where I do all my printing. Anyhow...
Today the standard is Gamma 2.2 Have you printed the standard evaluation image with just the driver controling color? Open it and print it. Do not edit it. Join my FB Group and go to FILES to obtain it. Watch my color management videos. Assuming you monitor is calibrated, your lrinter operating correctly and you are using tbe proper settings I demonstrate in those videos you sbould be able to obtain neutral results. Color casts are due to improper settings as long as the printer is 100 clog free.
Hi Jose. My prints are very magenta. I saw all your videos, but something strage happens. When I click print settings, I dont have the color managment option. So I cant change everything you suggest. Do you know why? or where I can find it? I have a canon pro 10, and a macbook pro.
You're on a Mac right??? It's not available on your driver. If you have print preview on, disable or your MAC driver will produce Magenta prints. No offence but that is I will never use a MAC for printing photos. It tries to automate tbings because it thinks you are not smart enough to set up your color managent settings yourself.
Have you ever tried printing A Standard Image? And not one you've edited. Also are you using a complete color managed workflow? What inks are using? If not original or at least OEM matched 3rd party ones then there is not much to discuss.
Jose Rodriguez yes I've tried a normal Image. I watched the red rover RUclips video. I've watched this video 3 times. And now tested 19 a4 glossy paper. still pink.. I'm using a can iP7200 but im now questing am I using the correct icc profile... aaaghhhh going mental with this.
Then it is a work flow problem. Can you describe in total detail how you are printing? Monitor calibrated? I need to know every detail then I can catch if there is something missing in the process.
I do not know your printer model. I have loots of canon printing menus demonstrating the correct workflow to achieve neutral prints. Stop ways ng your no and paper and get it right from the start.
ok. I think I have established that I am not double profiling but my prints are still the wrong colour. I am using photoshop on an iMac and a canon ip8750... can anyone link me to the best video to try next please?
Wrong color in what regard? Have you printed the UNEDITED Evaluation Image found in my FILES tab in my Facebook group? You can not evaluate a printer's output unless you print a CONTROL image. If your monitor is not calibrated for linear neutrality, contrast, brightness and white point and you edit on it........... well, how do you know if what you see on it is even correct. Then you edit while trusting that what you are seeing is actually accurate. See what I mean? Print the Eval image and look at it for neutrality and simply....does it look correct. If it does then it's your display introducing errors. When you print the Eval image just open it and print it. Let the DRIVER control color. Use Canon paper and choose that paper in the DRIVER media menu. If you are on Windows which I hope you are, choose Color / Manual Adjustment then MATCHING and then ICM. The driver will automatically link the job to the CANON paper you chose in the media menu. On MAC......well I am not sure. Good luck. Check out my Basic Printing PLAYLIST.
@@cheo1949 wow ok, thank you. Not on windows, Mac I’m afraid. Also don’t have Facebook… not doing too well am I. I used a spider screen calibration device, and a target sheet provided by the paper company (Marrutt), which shows the colour to be more magenta. My greys are warm, almost brown instead of the slate grey that they should be. I’m sending files from my iPad to my iMac, where the colours are consistent on both screens, but they always print this way. I will get someone who used Facebook to find me the Eval file, thanks
What’s seems odd, at least to me, is that even when I select grayscale printing, the black and white images are much warmer than they should be, where as I was expecting that to complete;y desaturate them.
@@cheo1949 Hello again... so I just tried the red river trouble shooting and it seems that when I allow the printer to manage the colours and select canon colour matching, the colours are more accurate. still too dark but not pink/brown as before. so I guess apple is blocking the profiles and I just have to not use photoshop, which is pretty frustrating but oh well. thank you for your help with this!
Hi Jose, "clicked ICM then Lightroom Classic crashed." I've been watching many of your RUclips videos and they have been very helpful. I was able to get my Epson Stylus Photo 2200 printing again after over 10 years of none use. Nozzles were plugged right up. Improper storage. Nozzle check is perfect. Test prints using gamut test Tiff file look great! I am getting a magenta cast on my edited and jpeg prints using Lightroom Classic. I calibrated my monitor with datacolor SpyderX Pro. Per your suggestion in a video of yours, I went to Advance in the printer dialog box and clicked ICM then Lightroom Classic crashed. Did this several times after reboot each time. Have you heard of this before? I feel if I am able get that radio button to not crash Lightroom I'll be golden. I'm using a Dell desktop running Windows 10. Thanks in advance, Andrew
If your test prints look great but your edited images are magenta...guess what? Your monitor needs its white point adjusted as it may be causing to akter your images to the point they look good but are actually on tbe magenta side. The spyder calibrators are not rely that good.
@@cheo1949 Thanks for the quick response. I wasn't really clear with my question. I went to Advance in the printer dialog box to select the ICM button to stop the printer from managing the color and allow only Lightroom Classic manage the color and when I did Lightroom Classic crashed. I was wondering if you've heard of this before? Thanks again for your time and help.
Hi Jose, As a UK resident I have just found and subscribed to your channel. I had the magenta cast problem and you state that this topic has been covered before. Having produced so many videos, could they not be numbered, so when you say you have already covered this topic, refer the viewer to the appropriate number. I spent ages scrolling down looking for the video in question, which I couldn't find. Many thanks
Magenta cast problems are caused by common work flow errors and MAC driver. Need to know the printer and whether you are using OEM inks or not. In my channel main page there is Magnifying Glass icon. I simple clicked it and put in "Magenta cast" ruclips.net/video/Mh-Y1LIrzlA/видео.html ruclips.net/video/WltJO-VTW2k/видео.html
Jose Rodriguez Hi Jose, thank you for responding. I have a Canon PIXMA 610 which has been excellent over the years. I have used compatible inks for years, with no problem until recently. I have also deep cleaned the ink jet heads but with no improvement. Perhaps a new printer?
Have you done a nozzle check to see that ALL you color channels are firing 100%? Are you printing allowing the driver to control color or your editing app using a matching ICC profile? Also, did you ever get correct color on your prints at all in the past?
Jose Rodriguez yes I cleaned head and nozzles several time. The summery is: I finished LM color and I put a little M in the tube, then all prints become reddish! I made LM tube empty and bought new LM and filled it. Then selected a red sunset photo and printed few to reduce red! But still didn’t work! Before this, from my Imac I was printing straight away perfectly all images without using photoshop or any other program but today finally I went to advance setting of Epson window and I selected Standard Print and not Vivid color print. The result was much better but every time I should go to set printer and before was automatically set and perfect result. Please advice. Thank u
Original inks? Or third party. You have not told.if you grab nozzle check. That is the first thing you must do and color changes. Occur. W as your color correct before you added ink? You have an I'm f!ow.problem or air in the system. Nozzle check will tell you if you have a double air in the system and in the print head dampers.
Hi Jose, Thanks for the tutorials on printers. I am just starting a business up in sublimation printing. The problem I'm having is when I print a wrap sheet the image looks dull which I expect on sublimation paper. However, when I produce a mug the photo looks darker than displayed on the monitor. I have carried out head clean, print tests and I ensured the colour management is only using the icc colours I bought from the suppliers. The other issue I have is after creating a mug I have noticed a number of black lines running along the top of the mug, the black lines are not noticeable prior to using the heat press. This makes me think the rollers need cleaning as the printer paper went though the printer twice as if it was printing a double sided page. I have no idea why this started to happen but notice my printer paper was laying faced down after completing a printing job. How do I clean the rollers without damaging it. I am told that my printer is not covered by the warranty because I have used sublimation ink! I am going to scroll through your tutorials to see if I can find a tutorial on my problem. Thanks Anj - UK
Boy you are in a field I know absolutely nothing about! Zero, Nada! Other than different transfer situations might equate to different results, I can't honestly free any suggestions. On your second question, yes you might want to take a look at your rollers. By the way, what printer are yoiu using again?
Jose, I bought a brand new Epson L3050 which is an Eco-tank printer and used the original ink in the box, I couldn't get the printing to get the colors to look true, Red looks orange and green doesn't look green. I couldn't find the right ICC profile to choose from. I am printing on plain Xerox papers and the printed pages get out soaked in ink and colors as mentioned are off. I know that colors can never totally match the screen colors, I totally understand that, but at least if I print a flag with red, I expect the flag to have red, not orange color. Where I can get the proper ICC profiles to download? I couldn't find any place that directly offers those downloadable profiles for Epson L3050, please advise. Thanks.
You could have custom ICC Profiles made bit so you know the inks used on those printers are pretty much horrible and only really suitable for document printing on plain paper regardless of their claims.
But have you at ANY time gotten a neutral print with it? I am trying to figure out it this is a sudden problem with the printer or if this is the printer's baseline performance and is best it can do.
Had a problem with my printer. Just typed in my situation to see what I can do. I didn't need a rant on how you've already solved this etc. Horrible first impression. This is NOT how you get new people to follow you.
First of all your skin must be super thin. Some people can't take dead honesty! I have to repeat myself over and over and that will often ruffle some feathers. I noticed the rest who viewed it tend to disagree with your reaction. I think 30k followers speaks differently!
A) you repeat yourself a lot. Made the video almost painful to watch. I don't know how many times you said that you already covered this on other videos, but it was several. B) Nothing you suggested helped me with my problem, so I solved it myself and thought I'd post the solution on here for other people with a reservoir type Epson printer. Mine was printing pink when it should have been cyan. I went into Settings, then Printer, then selected the Epson ET-2650, then Printing Preferences, then the Maintenance tab. Under Maintenance, you can select Power Ink Flushing. This will flush the line if you haven't used your printer in awhile and it gets clogged. I printed a cyan page after that and it looked fine.
You obvious NEVER watch my videos. I was reading the report from Red River. Yes I told you not be lazy and search my 1400 and then complain. I didn't lead you my the hand because I do not cover your model. If it was actually a photo printers I may have. I know nothing about the Eco Tank printers and I didn't have my Crystal ball with so I would magically solve your bad ink flow problem. The suggestions I read about were from a major paper producer. I provide are about workflow and not because your tank printer has air in a line. It will happen again..i guarantee it. There are always other channels to watch...or are there? Oh and everyone else did love the info but sorry you didn't.
This was my first Jose Rodriguez video that I have watched. I was a fan at only sixty seconds in. Thanks.
That's great. Glad to have you on board.
I like your face, it's an honest face. Thanks for this, making a valentine's card for my girlfriend and it's all pink-tinged, will try this later.
Thank you Gary. Incorrect color reproduction is the result of many possibilities. Hope my videos will help. Check out the Color Management PLAYLIST. It covers all the aspects to provide with that " What You See is What You Get" condition.
Thank you I checked the print preview box and the it no longer prints in pink, thank you so much it took some hours to figure this out. GREAT HELP. GOD BLESS.
Print Preview is a huge trouble maker! Glad to help!
P800: It was too Magenta out of the box. I was using Print Preview. Thanks for sharing the tip!
Why on earth wouldn’t Epson warn users rather than have customers so frustrated with their products???
Disable preview.
hi i did all cleaning and checking but still, prints are very reddish! please advice.
I lost my color profile settings for my sticker project and thought I had it figured out. I realized color sync was not checked. thank you!!
Glad you solved it.
Jose Rodriguez
Also, this was the first time changing the ink since I bought it several months ago. I noticed that after I replaced my cyan and magenta, the print quality wasn’t as good as before. I could see a cyan tint on my artwork. I took the cartridges out and gave it a better tap and shake. I also pushed in on the cartridge plunger a few times that is located on the back. Now everything is back to printing perfectly!!
Thank you so much for this. It's very helpful. I very much appreciate your thoughtful insights on this important topic.
Thanks.
Gday Jose, Just wanted to say you solved all my problems with my vapor Apparel sublimation printing. Turn Off the setting in color matching. No more bleed or magenta coming from the black ink. Many Thanks.
Highly appreciate this info. It's now logged in the memory bank. Thank you.
You're welcome!
What worked for me is that the Blue was missing on the nozzle check, I just took the blue cartridge out and put it back in 2 times and it started working again.
Sudden color balance change is always due to a particular cart or carts not providing required ink flow. But you didn't mention what printer this occured on. That would help.
This worked for me on my Canon MX922 for Cyan. Phew!
Bingo! That did it. I had the identical problem. Removed the blue cartridge and put it back in 2 times. My pics are coming out great once again. My printer is an Epson SureColor P400.
I have a HP DESIGNJET 450C with this issue. All prints are PINK (Magenta)? Could you help with a link to the video for colour management with drivers etc...
I have never owned an HP printer whether office type or for photography but I assume color management would remain pretty much the same as with any other brand. The first thing I would ask you to do is to print a standard image simply letting the driver control everything use a photo paper compatible with your HP printer Choose the matching Paper type in the drop-down menu in the driver. if you get a neutral result then your problem lies with your own private images. By the way when you open a standard image you never edit it regardless of what it looks like on the monitor. Specially if it is not calibrated. There are so many aspects to this that I cannot begin to begin to point you in any particular direction but you first need to establish that the printer by itself can actually print neutral also perform a nozzle check to determine if any of the color channels are not printing 100%
My HP Envy Photo 6234 has a pink cast on my edited photo compared to what I see on my monitor. How can I fix this please?
I use a Canon MG5650 with Photoshop cc. If I print a jpg image on plain paper the black is black. If I print the same image on the glossy setting the Black is deep magenta. I let PS manage the colours.
I have changed the black ink cartridge and run a test page OK. Help!!!
First of all when you print on Plain paper that printer is probably using a pigment base black ink and when you print photos it will revert to a photo type Black Ink which is usually dye based and is not true black. It's actually a deep purple. The driver needs other colors to composite and create a true black. You should try to print with just the driver and see what happens since you're using Photoshop to manage color are you turning off color matching in the Canon driver and then using a matching paper profile in Photoshop? If you are not doing that then you're double profiling
What about Kodak printers I have a problem with the images they print out black and i did a print head clean and they still print black please help
When I print from Adobe Acrobat Reader it has pinkish hues, but when I print same picture from Word it is totally normal. Print preview is is turned off on printer properties, but still shows when I hit print from Adobe. Do you know what steps I need to take?
Another great video as always, found it hiding in the playlist. As an OSX user, I have to agree that with every new update Apple just messes up the printing drivers, and sometimes they dont ever bother to correct the errors. This problem usually effects more of Canons then Epsons. I usually use my own profiles as I print on range of media with different types of inks, but I can not use Mac ICC profiles on Windows or other way around, so I have to create separate profiles. To disable printer controlling color profile, in color matching part of the printer driver I just select Generic RGB which disables printers controls of colors and then use the printing program with appropriate profiles to print. On Windows disabling printer color control is far simpler and easier.
Why does my epson xp-424 print a blue background over the entire sheet when I copy a document from my mac computer?
Everything I print is turning green is my magenta gone out or clogged
I have an Epson 1400 converted to DTG. How do I stop the printer driver from controlling the color. I’ve spent an hour trying to find this option
I no longer have one but I think there is an Advanced tab on the main driver preferences window when you then click on ICM and then no color management or simmilar term.
I am printing my decals using my Canon iP2770 for my customized Hot wheels. Since I'm using a water transfer paper it needs Acrylic clear coat after printing, and after drying it up for like 12 hours it starts to have pink colors. I am not really sure if it is reacting with the Acrylic paint or is it the ink cartridge itself. Please help. :/
I am afraid you got me there. Sprays are usually solvent based and can indeed cause weird effects on water based ink printed items. I'M sorry that I can't help you out with a possible answer to this.
Sorry for beating this horse. But I can't get my Epson 3800 to print properly on RR Satin. It does fine on Glossy paper and Epson luster. Yes, I watched the Epson videos on the 3800 and have management and other settings set perfectly. I also did a nozzle check and it came out perfectly, even the yellow channel. Did two wasteful cleaning processes and it still has a magenta cast. I am not using a "preview" when printing. As I mentioned I am using the correct printer profile for the paper and no color control in the print module so there are no conflicts. I have reviewed the settings over and over again and followed Epson video precisely and nothing gives. any ideas will be appreciated.
Why not try it simply letting the driver control color and choose a semigloss paper choice in the driver and see if it a problem with their Profile.
If it still prints magenta then it is the paper. Not much I can suggest as I am not there with you.
@@cheo1949 YOU - ARE - A - GENIUS! Thanks for your help brother. I was stuck on using the profile for the paper, "which is what we are supposed to do", lol. It's still not perfect but it effeminately looks better. Still trying to get it to the next level, now if I can get my black to come in more black that would be great.
mine are printing purple instead of gray. ( wf7720 , sublimation, printing)
I have an Epson 247 a box came up and I think I gave the wrong answer and now it will only print in magenta can you help please
Need a lot more info.
Hi i have a problem in a canon Duco 252 Color Machine,.. is not printing in the center, i check with the color quality, Text shaded if color is pink but it print come light pink in center, how to recover the machine printing quality please help me to get a solution
Sorry but I am only familiar with dedicated photo inkjet printer. I don't know the printer you are referring to.
i have a epson et 2750 ecoh tank printer using the ink that came with the printer and epson ultra premium photo paper glossy new out of the box only been using it about a month or so every time i run a print of a picture i end up with a blue line at the bottom some times blue and purple line but if i copy a photo from the scanner no problems ive tried reinstall of the drivers and software still the same problem even tried using a different computer with just the drivers after watching your video i went to device and printer selected preferences more options at color correction i selected custom and hit advance and selected no color adjustment hit ok and printed a picture no blue or purple came out just right for the record under color control it gave me color mode which showed adobe rgb but i dont think that was the problem but disabling no color adjustment might have done the trick thanks
That sounds like a software problem and not due to ink problems. I've never seen that so can't begin to suggest a solution.
@@cheo1949 turns out a bad wireless connection caused the problem after disconnecting the printer and reconnecting its printing pictures just right
I have a sublimation printer epson 7210. Grey becomes purple end Green becomes bleu. I try-out everything but notting helps. I print from coreldraw
You get that AFTER you transfer? What are your printer driver settings?
@@cheo1949 i get it on my print, even before transfer. 6 months ago there was no problem at all. I allready try an other computer but it's the same.
@@marnixduprez7432 are all you color channels 100%? Run a nozzle check.
Hello Jose. I have a Canon Maxify, MB2720 that prints pink/magenta instead of the color red. The printer properties box and printer driver area do not allow me to adjust the colors, etc. How would I disable color matching on this particular Canon model?
I have an old Kodack ESP C310 I changed the color ink and now have a pink tint in only the black and white print....don't know what is up, I have never had any problems with this printer before. I mention this here in the comments because Kodak isn't addressed in your video.
That's because they no longer make Pro photo printers which is what I deal with. Your print head or the cart is not flowing ink as it should.
I came on here for help as in some cases was printing pink instead of blue say in a pair of shorts, I am printing from and Apple iPad and was fine until recently ☹️
There is "Something" about magenta casts on prints done on a MAC System and no one has been able to put their finger on WHY! Sorry but I am on Windows 10 running 13 pro level photo printers and I never experience that.
Hi I have an Epson ET-2750 and we are soo confused, it keeps printing everything Magenta. If I print a pdf it prints black but has a hint of red in some spots, but if I print a picture of a document either from my laptop or my phone it prints magenta. I'm confused on how to fix and I've tried so many things please help!
Always run a nozzle check any type you do not get the proper color rendition. Then if needed, run a cleaning cycle. Now say pdf prints black. And that's normal? I need to know your actual settings from your computer ( forget phone that is not color managed ) as well as your printer's driver. Assuming your inks are flowing 100% as determined by a nozzle check, off color is due to work flow inconsistencies.
do not say that, you are very handsome my good sir!
bruh its black for me
No idea what you are talking about!
Jose Rodriguez sorry for making you confused, that was a meme
Way over my 69 year old head!
Jose Rodriguez knowyourmeme.com/memes/printer-magenta?full=1
Here is the source of the meme i was talking earlier :)
Stupid. Has nothing to do with his video go play
I have an older HP Deskjet printer that is printing very inaccurate colors for some of the color pallet. It's a brand new color cartridge (non HP). When I print the colors in DRAFT form, the colors basically match the color pallet (but they are light of course being in draft). But when I print the normal print intensity, many of the darker shades flip to another color entirely. So a dark blue on the original pallet becomes a hot pink or maroon on the printed page. A darker magenta on the pallet becomes an olive green on the page. A darker green becomes a blue or purple, and a darker yellow, gold or orange becomes purple. Any suggestions Jose?
I have no idea as you are not using OEM inks. And what is a Pallet? I also do not use any HP Printers. You need to double check your driver settings and also run a nozzle check to see what colors channels may not be printing. That would cause crazy color shifts.
Im allready so fucking pissed about my stupid fucking printer. So cannot sit down for half and hour and listen to anekdotes about chefs pissing in a pot full of stew.
Hi! Please answer my question. I would really appreciate it.
I am 13 yrs old and I am trying to fix our printer (Epson L3110) because my dad is not home and nobody else knows how to fix it. So at first my printer wasn't printing yellow it came out as pink then i tried to do the nozzle check. It only showed the colors black pink and blue bars. So i clicked the option clean after that it still didn't work so I tried it again. But after that the color blue also won't print so now it only prints the color pink and black. Please answer... THANK YOU!!!
Well your lines or Print head are not allowing ink to flow from the tanks either because of clogs. Are you positive you have ink in the tanks? Sorry but I do not use those printers as we only work on PRO Photo Printers here.
Thank you for the reply!!! And yes I am positive there is ink in the tank. May i ask what is the best thing to do in this case??
Your printer uses dye inks which hardly ever clog unless it has sat for a long time. Open up the printer top and long at your inks lines and make sure you have a solid yellow magenta cyan and black without any gaps ( Air ). Other than deep cleanings followed by nozzle checks.
Thank you very much sir!!!
It's great that you reply to you reply to your viewers!!
I have hp deskjet 2630 and it's printing magneta it started with blue then it started printing magneta PLEASE HELP
We do not use HP here but basically your print head is clogged. Run cleaning cycle ans nozzle check.
He has more knowledge than most professors
Most professors only have book learning and zero hands on.
@@cheo1949 so true
Thank you very much. I lost hours to a printing problem and you had me fix it.
Glad I could help.
I have been printing with my new Canon Pixma pro 10 successfully for a full week. Beautifull and accurate colors.
Randomly I ended up getting 1-2 blue-ish prints and ended up resolving the issue with a restart.
Now a week later I started getting magenta looking print all of a sudden.
NO changes whatsover in my setting or the profiles, same prints, different color.
I followed the entire step to make sure there was no dual profiling, turn off color matching.
I printed with photoshop, photo print pro and lightroom.
Same issue.
I did nozzle test and nothing is clogged. I am truly clueless, Please help?
Windows or MAC?
Excellent. Thanks.
I have an HP 4630, I put in a new HP 61 Tri color cartridge and after 30 good color pages (I was printing digital prints), my brown turned pink. Will I need to replace my cartridge for one missing color after 30 pages? This is my first time printing digitals.
Yes. That's the problem with tri color carts. Are using genuine carts? That seems pretty low. Also I do not work with up as they no longer produce real photo printers. Only Canon and Epson.
Hi si I have a Epson printer l350 it is print only black colour. After cleaning flusing not print any dot of magjenta cyan yellow. I did head cleaning manual it is free but not print any dot of colour m c y. Is there board problem or other. Help me sir
That is what will happen after only printing using black ink for a long period of time. All I can tell you is to continue trying to clear out the clogged CMY channels. At the worst you would have to begin again with a fresh printer. Hopefully not.
hello i have canon pixma mg2570s and i have this problem i dont know what to do.my cyan and yellow ink is not working
Run your nozzle check which will show what channels are blocked either due to lack of use of using bad cart not originals. If you are using original carts run a cleaning cycle and print another nozzle check. if you are using compatible carts, stop.
Until your print head is cleared, DO NOT print any more images of you will permanently damage your printhead.
As stated in the video to summarize and save time
A few reasons. 1. Double color management, tell printer driver to stop controlling color. 2. Blocked print head nozzle. Epson print viewing should be turned off.
That's a start.
My print prints in blue colour when i put by clour cartiladge in black colour
I have no idea what you are asking. Is this a pro photo printer? If not then I don't really know what you mean by BLUE. maybe you mean CYAN.
My printer canon mx410 photo glossy pictures printing pink color ? Do I change ink?
You are not using OEM inks right? And may you need to run a Nozzle check to determine what color channel is not printing or feeding ink. Very likely your Cyan and yellow are not printing.
Hello, I have the Epson ET-2750 and whenever i try to print black on glossy paper. after it dries the black becomes purple. This is not the case when I select to print in matte or plain paper. However, if i select matte paper to print on glossy, although it will be true black it does not properly prints on paper making it easy to scratch off. Please help I have wasted so much time, paper and ink trying to figure this out.
What inks and what Glossy Paper. The black ink is not compatible apparently with your glossy paper.
@@cheo1949 I'm using the ink that came with the printer I believe its called 502 black ink. The paper is HP glossy. Thanks for the reply !
It's the paper!!! HP papers are not compatible with other printers inks.
Yes!!! I bought Epson paper and the black color looks much better. Thank you!
Can't get video to play. I have new router and 100Mbps connection. Other RUclips videos play fine. I have a Canon mx890 and eBay ink. Everything has pink hue. Thx!
Watching it right now on my phone. Seems to look fine to me.
Just purchased and successfully set up an Epson EcoTank 2760. I am shocked at how terribly washed out all the colors appear, particularly red. I ran a nozzle check and everything is perfect. Setup and installation was easy. But the color quality is baffling. I've tried printing the same image from Adobe, GIMP, Gravit, Windows Picture Viewer, etc. Same terrible results every time. I did my homework (reviews, YouTUbe, etc.) on this printer and no where can I find mention of this problem. I am bringing this back tomorrow without hesitation. I know from past experience that the exact same image printed on an HP Office Jet 3830 Series printer produced more accurate, vibrant colors compared to the on screen image, for half the price. I thought moving into the non-cartridge world would be proactive, but this is a joke.
It's the inks my friend. They are very cheap. Not much you can do about it. I almost bought an L series printer just to have one to review and I decided against it.
You're very thorough. Thanks for taking the time to put this up here for us. Unfortunately, none of these fixes worked for me. Nozzle check reveals all cartridges are working. Went to the article too. Bummer. I have the Epson Artisian 730 and I'm trying to print a great 1940s black and white photo of my old neighborhood in the Bronx but, it's pink, no matter what I do. Anyhooo...
All 6 channels nozzle check is perfect??? Mac or PC? We're younever able to.print a neutral result? Or just this time.
Wow. AND you get back to us? Pretty cool guy. OKAY first of all, I didn't have "Print Preview" selected so, that wasn't it. Many found that to be the solution but, it wasn't for me :(
I'm working from a PC and yes. All 6 colors in the nozzle check show up fine. Actually,that was the first thing I checked. I never had this problem till a week ago when I tried to print this picture. Tried other pictures and the same magenta hue. But, it doesn't show pinkish when printed on my ancient HP 1200 PSC and, it was printed from the same picture viewer program Xnview. I was willing to download the file on their website but, it's for Photoshop. I don't use Photoshop. I have it installed but, never use it. AND, this just happened so... Can't think of anything that could have caused it. Also in Advanced tab under: "Color Management" I ticked:
"Color Controls"
Color Mode "Epson Standard"
and changed Gamma to "1.8" as the Epson website recommended but, no dice. So I then selected "ICM" and "Off (No Color Adjustment) but that too did not help.. I also changed it from "best photo" to "photo" thinking to reduce saturation I guess. That helped on the HP but, not on the Epson Artisian 730 where I do all my printing. Anyhow...
Today the standard is Gamma 2.2
Have you printed the standard evaluation image with just the driver controling color? Open it and print it. Do not edit it. Join my FB Group and go to FILES to obtain it.
Watch my color management videos. Assuming you monitor is calibrated, your lrinter operating correctly and you are using tbe proper settings I demonstrate in those videos you sbould be able to obtain neutral results. Color casts are due to improper settings as long as the printer is 100 clog free.
Hi Jose. My prints are very magenta. I saw all your videos, but something strage happens. When I click print settings, I dont have the color managment option. So I cant change everything you suggest.
Do you know why? or where I can find it? I have a canon pro 10, and a macbook pro.
You're on a Mac right??? It's not available on your driver. If you have print preview on, disable or your MAC driver will produce Magenta prints. No offence but that is I will never use a MAC for printing photos. It tries to automate tbings because it thinks you are not smart enough to set up your color managent settings yourself.
AGGGGGHHH 14 prints later STILL pink all over the print. What am I doing wrong?
Canon iP7200..
someone please helpppppppppppppp
Have you ever tried printing A Standard Image? And not one you've edited. Also are you using a complete color managed workflow? What inks are using? If not original or at least OEM matched 3rd party ones then there is not much to discuss.
Jose Rodriguez yes I've tried a normal Image. I watched the red rover RUclips video. I've watched this video 3 times. And now tested 19 a4 glossy paper. still pink.. I'm using a can iP7200 but im now questing am I using the correct icc profile... aaaghhhh going mental with this.
Jose Rodriguez yes using OEM INKS. Printer is virtually brand new. few weeks old.
Then it is a work flow problem. Can you describe in total detail how you are printing? Monitor calibrated? I need to know every detail then I can catch if there is something missing in the process.
I do not know your printer model. I have loots of canon printing menus demonstrating the correct workflow to achieve neutral prints. Stop ways ng your no and paper and get it right from the start.
Thank you so much!
Thanks
I accidentally dropped my Epson L130 printer since than it prints only pink colour. Please help
You mean Magenta! Since it is a CISS type printer I think you damaged it internally.
@@cheo1949 why should I do now ? I have done nozzle clean, head cleaning several time.
Repair center. Its imposible to know what has taken place when it was dropped.
ok. I think I have established that I am not double profiling but my prints are still the wrong colour. I am using photoshop on an iMac and a canon ip8750... can anyone link me to the best video to try next please?
Wrong color in what regard? Have you printed the UNEDITED Evaluation Image found in my FILES tab in my Facebook group? You can not evaluate a printer's output unless you print a CONTROL image. If your monitor is not calibrated for linear neutrality, contrast, brightness and white point and you edit on it...........
well, how do you know if what you see on it is even correct. Then you edit while trusting that what you are seeing is actually accurate. See what I mean? Print the Eval image and look at it for neutrality and simply....does it look correct. If it does then it's your display introducing errors.
When you print the Eval image just open it and print it. Let the DRIVER control color. Use Canon paper and choose that paper in the DRIVER media menu.
If you are on Windows which I hope you are, choose Color / Manual Adjustment then MATCHING and then ICM. The driver will automatically link the job to the CANON paper you chose in the media menu.
On MAC......well I am not sure.
Good luck.
Check out my Basic Printing PLAYLIST.
@@cheo1949 wow ok, thank you. Not on windows, Mac I’m afraid. Also don’t have Facebook… not doing too well am I. I used a spider screen calibration device, and a target sheet provided by the paper company (Marrutt), which shows the colour to be more magenta. My greys are warm, almost brown instead of the slate grey that they should be. I’m sending files from my iPad to my iMac, where the colours are consistent on both screens, but they always print this way. I will get someone who used Facebook to find me the Eval file, thanks
What’s seems odd, at least to me, is that even when I select grayscale printing, the black and white images are much warmer than they should be, where as I was expecting that to complete;y desaturate them.
@@cheo1949 Hello again... so I just tried the red river trouble shooting and it seems that when I allow the printer to manage the colours and select canon colour matching, the colours are more accurate. still too dark but not pink/brown as before. so I guess apple is blocking the profiles and I just have to not use photoshop, which is pretty frustrating but oh well. thank you for your help with this!
Thank you thank you thank you
You are very welcome
Hi Jose,
"clicked ICM then Lightroom Classic crashed."
I've been watching many of your RUclips videos and they have been very helpful.
I was able to get my Epson Stylus Photo 2200 printing again after over 10 years of none use. Nozzles were plugged right up. Improper storage. Nozzle check is perfect.
Test prints using gamut test Tiff file look great!
I am getting a magenta cast on my edited and jpeg prints using Lightroom Classic. I calibrated my monitor with datacolor SpyderX Pro. Per your suggestion in a video of yours, I went to Advance in the printer dialog box and clicked ICM then Lightroom Classic crashed. Did this several times after reboot each time. Have you heard of this before? I feel if I am able get that radio button to not crash Lightroom I'll be golden.
I'm using a Dell desktop running Windows 10.
Thanks in advance,
Andrew
If your test prints look great but your edited images are magenta...guess what? Your monitor needs its white point adjusted as it may be causing to akter your images to the point they look good but are actually on tbe magenta side. The spyder calibrators are not rely that good.
@@cheo1949
Thanks for the quick response. I wasn't really clear with my question. I went to Advance in the printer dialog box to select the ICM button to stop the printer from managing the color and allow only Lightroom Classic manage the color and when I did Lightroom Classic crashed. I was wondering if you've heard of this before? Thanks again for your time and help.
ICM means the printer IS managing color. Or did you then pick no color adjustment or control? I forget what the 2200 calls it.
Hi Jose, As a UK resident I have just found and subscribed to your channel. I had the magenta cast problem and you state that this topic has been covered before.
Having produced so many videos, could they not be numbered, so when you say you have already covered this topic, refer the viewer to the appropriate number. I spent ages scrolling down looking for the video in question, which I couldn't find. Many thanks
Magenta cast problems are caused by common work flow errors and MAC driver. Need to know the printer and whether you are using OEM inks or not.
In my channel main page there is Magnifying Glass icon. I simple clicked it and put in "Magenta cast"
ruclips.net/video/Mh-Y1LIrzlA/видео.html
ruclips.net/video/WltJO-VTW2k/видео.html
Jose Rodriguez Hi Jose, thank you for responding. I have a Canon PIXMA 610 which has been excellent over the years. I have used compatible inks for years, with no problem until recently. I have also deep cleaned the ink jet heads but with no improvement. Perhaps a new printer?
Thank you sir i owe you a beer
Any time!
i have imac to epson L850 by the way!
Have you done a nozzle check to see that ALL you color channels are firing 100%? Are you printing allowing the driver to control color or your editing app using a matching ICC profile? Also, did you ever get correct color on your prints at all in the past?
Jose Rodriguez yes I cleaned head and nozzles several time. The summery is: I finished LM color and I put a little M in the tube, then all prints become reddish! I made LM tube empty and bought new LM and filled it. Then selected a red sunset photo and printed few to reduce red! But still didn’t work! Before this, from my Imac I was printing straight away perfectly all images without using photoshop or any other program but today finally I went to advance setting of Epson window and I selected Standard Print and not Vivid color print. The result was much better but every time I should go to set printer and before was automatically set and perfect result. Please advice. Thank u
Original inks? Or third party. You have not told.if you grab nozzle check. That is the first thing you must do and color changes. Occur. W as your color correct before you added ink? You have an I'm f!ow.problem or air in the system. Nozzle check will tell you if you have a double air in the system and in the print head dampers.
Hi Jose,
Thanks for the tutorials on printers. I am just starting a business up in sublimation printing. The problem I'm having is when I print a wrap sheet the image looks dull which I expect on sublimation paper.
However, when I produce a mug the photo looks darker than displayed on the monitor. I have carried out head clean, print tests and I ensured the colour management is only using the icc colours I bought from the suppliers.
The other issue I have is after creating a mug I have noticed a number of black lines running along the top of the mug, the black lines are not noticeable prior to using the heat press. This makes me think the rollers need cleaning as the printer paper went though the printer twice as if it was printing a double sided page.
I have no idea why this started to happen but notice my printer paper was laying faced down after completing a printing job. How do I clean the rollers without damaging it. I am told that my printer is not covered by the warranty because I have used sublimation ink!
I am going to scroll through your tutorials to see if I can find a tutorial on my problem.
Thanks
Anj - UK
Boy you are in a field I know absolutely nothing about! Zero, Nada! Other than different transfer situations might equate to different results, I can't honestly free any suggestions. On your second question, yes you might want to take a look at your rollers. By the way, what printer are yoiu using again?
I’ve bought a Aficio Ricoh 3410DN...... I still think it might be a problem with the ICC....
Where is the link he talks?
Video Descriptions! Read them for a change.
Jose your not ugly lol❤
Jose, I bought a brand new Epson L3050 which is an Eco-tank printer and used the original ink in the box, I couldn't get the printing to get the colors to look true, Red looks orange and green doesn't look green. I couldn't find the right ICC profile to choose from. I am printing on plain Xerox papers and the printed pages get out soaked in ink and colors as mentioned are off. I know that colors can never totally match the screen colors, I totally understand that, but at least if I print a flag with red, I expect the flag to have red, not orange color. Where I can get the proper ICC profiles to download? I couldn't find any place that directly offers those downloadable profiles for Epson L3050, please advise. Thanks.
You could have custom ICC Profiles made bit so you know the inks used on those printers are pretty much horrible and only really suitable for document printing on plain paper regardless of their claims.
HI sir! Good Afternoon how to fix red color or pink result of my printer ?
printer L805 sir
Have you ever been able to make neutral prints? I don't use that printer as its not really for quality photo work.
@@cheo1949 but this is we use everyday for photo printer
But have you at ANY time gotten a neutral print with it? I am trying to figure out it this is a sudden problem with the printer or if this is the printer's baseline performance and is best it can do.
Sir I continuously used all ink because I am a photgrapher. Sir is there board problem please suggest me . Thank u
There is No way for me to know what could be going on with your printer unless I was working side by side with you.
now it is just not printing at all
Explanation please.
35 dollar canon has better photos quality than epson printers
I doubt that! SHOW US!
10 minutes of tech bs. Your color ink cartridge is empty. Replace it.
LOL. Obviously a Short attention span sufferer!
How the heck is this useful?
You spent a minute and a half scolding me for watching your video. WTF?
Had a problem with my printer. Just typed in my situation to see what I can do. I didn't need a rant on how you've already solved this etc. Horrible first impression. This is NOT how you get new people to follow you.
First of all your skin must be super thin. Some people can't take dead honesty! I have to repeat myself over and over and that will often ruffle some feathers. I noticed the rest who viewed it tend to disagree with your reaction. I think 30k followers speaks differently!
A) you repeat yourself a lot. Made the video almost painful to watch. I don't know how many times you said that you already covered this on other videos, but it was several. B) Nothing you suggested helped me with my problem, so I solved it myself and thought I'd post the solution on here for other people with a reservoir type Epson printer. Mine was printing pink when it should have been cyan. I went into Settings, then Printer, then selected the Epson ET-2650, then Printing Preferences, then the Maintenance tab. Under Maintenance, you can select Power Ink Flushing. This will flush the line if you haven't used your printer in awhile and it gets clogged. I printed a cyan page after that and it looked fine.
You obvious NEVER watch my videos. I was reading the report from Red River. Yes I told you not be lazy and search my 1400 and then complain. I didn't lead you my the hand because I do not cover your model. If it was actually a photo printers I may have. I know nothing about the Eco Tank printers and I didn't have my Crystal ball with so I would magically solve your bad ink flow problem. The suggestions I read about were from a major paper producer. I provide are about workflow and not because your tank printer has air in a line. It will happen again..i guarantee it. There are always other channels to watch...or are there?
Oh and everyone else did love the info but sorry you didn't.
i was thinking the same thing Chris
old cocky guy tells 10 min long that he's mentioned the solutions allready
Yep. I did. Don't like it? Don't watch.
Sir I have epson L805. I was refilling the ink but accidentally put magenta on the light magenta refill tank. Can I still save my printer?
Yikes. Can you suck the ink out of the tank with a syringe needle?
Thank you so much!
You're welcome!