Man it is amazing how good this thing looks from where you started. You have turned this thing into an absolute fish catching gem. Nice work. Tight lines and Be blessed.
jon boats are first ballot hall of fame. we all either had one , dad had one , uncle so on. we all fished in them and we bitched but at the end of the day we had a blast.
Great job! I’m doing the anchor system you have and I got a few other ideas from you also. Thanks for the tips. I think I have the same cover, and I thought it was also not tightening, but after finally figuring out how the strap goes through, it does tighten. I had to look it up how it goes through. Let me know if you’ve got it or not.
I'm glad I could help! That cover has been replaced. It lasted a couple seasons before it ripped with an ice storm. What I ended up doing was just tying the straps at the needed length so all I had to do with buckle them and go. I'm sure I didn't put the buckles on right from the start though lol
Yep. It started october 1st but only been a handful of times due to the hot weather we have had for most of the month. Halloween to veterans day are my go to dates to get out
@@BeardsAndBowsOutdoors ya its been warm down here to bud well good luck hope to see it again i got mine all buttoned up now.I always watch and like your videos too take care and stay safe
I've seen several trying to convert jon boats into bass boats (raised fishing platforms, etc), with the results not very stable. Bass boats are usually wider to reduce such instability, with the raised fishing platforms often lower (than those installed high over the seats in jon boats) to again reduce instability. Just an observation, not a criticism.
I'm used to standing on tiny boats, even my inflatable sea eagle. When I stand on a bigger boat it's very stable to me compared to what I'm used to. My 1436 build turned out great but my 1648 will be even better
I'm with you. I mean they're nice rigs but there is so much weight added that is high on the boat. Like you said, unstable. The next thing that happens after adding 500lbs of stuff on the small boat is they are using GPS to see how fast it is and wonder why it's so slow. To each their own I guess.
The green and red lights need to be on the corners of the bow... The light cant be seen from sides very well and coast guard will complain... I used 6 inch. One on side and one on front and they met at corner and work perfectly and no coast guard complaint
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Product Affiliate Links:
*Millenium Marine Seat - amzn.to/3vVv3BD
*Springfield Marine Sliding Seat Track - amzn.to/315NtUV
*Boat Seat Swivel - amzn.to/2Zwd3S6
*Wise Camo Casting Seat - amzn.to/3nF6KUY
*Springfield Marine Adjustable Pedestal - amzn.to/3EG5pUT
*Kohree Switch Panel 12v - amzn.to/31cRh6Y
*Nilight 20" Light Bar & Pods - amzn.to/3Bo5URo
*Fulton Outboard Motor Lock - amzn.to/3pNI7rW
*Xprite Led Navigation Strips - amzn.to/2XXkFgg
*Gorilla Glue Adhesive - amzn.to/3Cqehgu
*Boat Hatches - amzn.to/3lHp8N7
*3M Marine Sealant - amzn.to/3AFqzQw
*Attwood Anchor System - amzn.to/3DmnqH2
*Attwood 10lb Anchor - amzn.to/3mzSP1W
*Attwood Anchor Rope 100ft - amzn.to/3DmnO8s
*Waterproof Boat Cover - amzn.to/3EnhaiE
*Minn Kota Edge 45LB - amzn.to/3uoKi5q
*Panther Tray - amzn.to/3mgZn5e
*Pedestal Seat Mount - amzn.to/3usU46y
*Female Trolling Motor Plug - amzn.to/2ZAxv4n
*Male Trolling Motor Plug - amzn.to/3F9CtW3
*Goop Coat It Epoxy - amzn.to/3CDrfHo
*Alumahawk Boat Paint - amzn.to/3kA7pqj
*JB Kwik Weld - amzn.to/39ziLo6
*Carpet Adhesive: amzn.to/3hEtfau
*Attwood Stowaway Stern Light - amzn.to/3GubhlJ
*Scotty Universal Mount - amzn.to/3pHgaBY
*Boat Tie Off Cleats - amzn.to/3mq4KQM
*SeaChoice Auto Bilge Pump - amzn.to/3CrotFo
*Bilge Pump Install Kit 3/4" - amzn.to/31g7fxj
*Rod Tie Downs - amzn.to/3nGUy5W
-----------------------------------------------------
Please Subscribe For More Fishing, Hunting, And Diy Videos! Thanks For Watching!
------------------------------------------------------
For All My Social Media, Merch, And Contact Info, Click Here: direct.me/beardsandbowsoutdoors
Man it is amazing how good this thing looks from where you started. You have turned this thing into an absolute fish catching gem. Nice work. Tight lines and Be blessed.
Thanks!!!
jon boats are first ballot hall of fame. we all either had one , dad had one , uncle so on. we all fished in them and we bitched but at the end of the day we had a blast.
Gotta love a Jon boat!
@@BeardsAndBowsOutdoors what you did to yours is nothing short of amazing. Now my daughter wants one but I am not that handy lol
I appreciate that! Now I am basically going to duplicate the 1436 to my 1648 and just keep the 1648
Yep......great set up!!
Thanks! 👊
Sweet upgrades man! Working on my job boat as well, this defiantly gave me some good ideas! Great video!
Thanks! Any questions, just ask
Love your build! Awesome!
Thanks! 🙌👊
Some great ideas, thanks
Thanks for watching!
Very nice man! Cool to watch it all come together.
Thanks!!
What a great Reno!!
Thanks!
You did an amazing job! Lots of great ideas in here! Thanks man
I just winged it like I always do and never have a plan. Somehow it always turns out!
Helpful video! Working on a Jon Boat conversion myself. Subscribed!
Nice! I will check out your channel!
Great job! I’m doing the anchor system you have and I got a few other ideas from you also. Thanks for the tips. I think I have the same cover, and I thought it was also not tightening, but after finally figuring out how the strap goes through, it does tighten. I had to look it up how it goes through. Let me know if you’ve got it or not.
I'm glad I could help! That cover has been replaced. It lasted a couple seasons before it ripped with an ice storm. What I ended up doing was just tying the straps at the needed length so all I had to do with buckle them and go. I'm sure I didn't put the buckles on right from the start though lol
I think it came out great nice job
Thanks!!
You done good my man!
Thanks!!
"SWWEEET "!!! 💫😎👍👏👏👏
Boat looks great!
Thanks!
AWESOME BUILD!!
Thanks!!
Hope you "catch" a deer 🦌 hahaha
Great job, love it!!!♡
hell yeah man gonna use some of these ideas (in my own way lol) but great job
👊
I love it
Question: Your running lights are NOT visible from the side, are they valid?
I added short led strips to the sides
hey beards your deer season start there yet been hoping to see you hunting in your deer stand
Yep. It started october 1st but only been a handful of times due to the hot weather we have had for most of the month. Halloween to veterans day are my go to dates to get out
@@BeardsAndBowsOutdoors ya its been warm down here to bud well good luck hope to see it again i got mine all buttoned up now.I always watch and like your videos too take care and stay safe
Good luck to you this season as well! I will definitely be doing some serious hunting soon
I want one !!🙆♂️🙋🏻♂️🙋🏻♂️
Question is how long do your batteries last? Thats alot of electronics
The troller will go almost all day on the 2 batteries. I've yet to drain the battery for the fish Finders etc
Anchors holders need info
The anchor system? It's attwood brand. I have a link in the description
I've seen several trying to convert jon boats into bass boats (raised fishing platforms, etc), with the results not very stable. Bass boats are usually wider to reduce such instability, with the raised fishing platforms often lower (than those installed high over the seats in jon boats) to again reduce instability. Just an observation, not a criticism.
I'm used to standing on tiny boats, even my inflatable sea eagle. When I stand on a bigger boat it's very stable to me compared to what I'm used to. My 1436 build turned out great but my 1648 will be even better
I'm with you. I mean they're nice rigs but there is so much weight added that is high on the boat. Like you said, unstable. The next thing that happens after adding 500lbs of stuff on the small boat is they are using GPS to see how fast it is and wonder why it's so slow. To each their own I guess.
I agree. Wood weighs alot more than aluminum
best thing to do with a drain plug, is to glue that ****** in so that it will never come out again !
The green and red lights need to be on the corners of the bow... The light cant be seen from sides very well and coast guard will complain... I used 6 inch. One on side and one on front and they met at corner and work perfectly and no coast guard complaint
Thanks for looking out.. I will probably add some side navigation lights to what I have already. That gorilla glue is no joke
Dwf
Dwf?
Looks great. Not a fan of the fire extinguisher in the spot where the fire would be.
Alot are located in the back but you bring up a good point. I will probably add one to the front of the boat as well. 🙌👊