EASILY Make Stickers for Substance Painter + Smart Material Download
HTML-код
- Опубликовано: 28 авг 2024
- Sticker creator 2 is a new smart material I made for use in Substance Painter. With this smart material, you can create realistic stickers for your models, and easily adjust their wear, aging, and damage levels.
I hope this can help bring your materials to the next level, and give the meshes you are working on an extra high-quality boost!
You can pick up Sticker Creator 2 right here: dylanabernethy...
Or buy it on Artstation here: www.artstation...
Gumroad Store: dylanabernethy...
My Twitter: / tiedie58
-------------------------------------------------------------------------------------------------------------
Background music by Lukrembo: • ONION - Lukrembo
Ramlethal Sticker Design: www.redbubble....
Dope! Bought it immediately. It's always great to see experienced artists like yourself being active on RUclips and in the general community.
Thanks so much! And it's my pleasure ^__^
oh man. i can already see this being used on every artstation models
why
This material is amazing. Just got it and had no issues worked just perfectly right away. Thank you so much.
Great asset. Just grabbed it from your GR. The only thing is the lagging when painting the wear in 4K. From the res in your vid it looks like you're in 4K too and yours is very smooth. I'm on a 3090ti so wasn't expecting any lag at all. Also, I'm not getting the raised peeling effect at the wear edges, as seen in your vid. One other difference I noticed is that in your vid the paper is revealed as soon as you paint wear, but on mine you have to paint in quite a bit before paper is revealed. Glue starts right away. Went through all the paper settings/mask paint but no luck.
Thanks for releasing this.👍
thanks :) yes the anchor points can be quite taxing on a system so if you have lots of layers going on it doesnt suprise me that lag could happen. might be worth lowering the resolution when doing this part. as for the height, depending on the resolution and scale of the sticker it might need to be adjusted. there should be a layer labled height you can crank up to solve this issue.
@@tiedie Thanks, yes the lag issue was more curiosity on why yours looked so smooth in the vid at high res vs my lag at 4k(especially with me being on a 3090ti😁)? I was just testing on a sphere with a single layer material applied.
Very good! Very useful! I already got it! Thanks!
Hugs from Brazil!
just got it, thanks for sharing
@tiedie i love this smart material ive used it on a few projects...but im currently working on one and i noticed a weird white spot show up on my object...i thought it was my mesh but when i removed the sticker creator it disappears so im not entirely sure whats going on here im hoping maybe you can help me.
Great work! I will check it out! The previous version was really nice and easy to use!
Super cool material and it looks great as well, thank you for making it! I will be getting it.
Just purchased. Thanks. Works great.
Just purchased it! Awesome. Got one question. How do you prevent the underlaying base texture say a bumpy tin can, from coming through to the sticker?
I had to crank the roughness to stop this.
insant buy for me too, gonna have a blast with this bad boy
That is marvelous, I need to get that.
Just bought it. Thanks!
Thank you so much Tiedie!!!
Is it possible to use the sticker image so that it’s position/ scale can be adjusted later? As opposed to being at the exact spot you clicked in the paint layer?
amazing smart material, im just starting substance so this looks like magic to me lmao. how does the 'height level' channel know to only affect the sticker application layer?
I used to use a sticker material from substance share before it closed, I think I'll switch to this
Hi there! Thanks for your tutorial and job you did in order to release this wonderful sticker generator. I bought it on gum road, but can’t figure out how to export ONLY stickers so I can load them on my mesh in blender..? Or may be I am wrong but once I import them into shader editor - I can see this gray mesh layer where the stickers are applied but how to make this gray transparent let’s say. thanks
theres some issue when i paint Sticker Wearness, it paint over the edge of sticker. how can i fix it??
Any tips for when there is normal/height noise on the material below? When I apply the stickers on top of a painted metal for example, the noise from that material makes its way through the stickers.
Good question. I left it so that some of the surface came through, but if you don't want any you can go to the layer that adjusts the height and change the height blend mode and opacity. That should help with things :)
I am having issues with paper and glue. When I paint it just looks like a mess. I can’t get that nice left over sticker tear like in the video. Anyone have this issue or know how to solve it?
I cant either... kind of bummed after buying. Mine just looks super gloopy, not like the video at all.
Hey Dylan, kinda late here and getting back into Substance so might be a newb issue :P But when I add the sticker creator its named Sticker creator - empty and Im using version 9.0! No matter what I try I cant seem to get the sticker to show up and properly attach itself to all the parameters! Are you aware of any fixes? Much love
This is amazing product! But they kinda get worse if I export my textures 8k instead of 4k. Is there anything I can do about it?
This probably has to do with the height and paper/glue layer scales. I'd recommend adjusting these to match your resoltion. 8k is very high, things will have to be adjusted for sure
I am sure this is a pretty dumb question but what’s the format of stickers? PNG?
Does this require a minimum version of Painter? I use Substance Painter 2021.1.1 (7.1.1) and I'm unable to import the .spsm. It says "an error occurred while opening this resource. it can't be imported." I bought both versions and the earlier sticker material imported fine.
That sounds like a version issue yes. This was made in the latest version so id expect it to need an update. sorry to hear that :/
FOR EVERYONE STRUGGLING WITH REI FROM EVANGELION HERE'S THE SOLUTION:
The problem actualy came from the "Sticker Application" Layer, because, somehow it's still filled while it should be totaly blank. So here's the trick:
1. Create a New Paint Layer.
2. Selected the effects of the Paint Layer from the "Sticker Application" layer. Then move them on the new Paint Layer you've just created (DO NOT copy/paste, it'll destroy the link with the others layers that allows you to have Heigh, Glue, Paper and Foil, just select and drop them on the Layer Icon).
3. Right Clic on your new Paint Layer > Add a White Mask.
4. Clic on the White Mask from the "Sticker Application" layer. Select the effects and repeat the process from Step 2 but for the White Mask (drop the effects in the white Mask)
5. You can now remove the "empty" "Sticker Application" layer and use the Layer you've just created as it is.
Enjoy :)
I'm going to follow this and replace the original download, you are a hero
@@tiedie all the credits goes to you, this smart material is so cool and have so much possibilities, I'm already enjoying it a lot
@@maxime1189 glad thats the case :) that said, it shouldnt have this issue baked in. I didnt realizse how many people had this pop up so i need to make sure I take care of it. Its a small (and pretty funny) issue, but shouldnt be there xD I appreciate the help
i cleaned it all up and reuploaded. I scrubed down everything across a fully covered UV plane so she is gone for good.
nice tutorial! where the stickers are scratched away, is the height removed in those areas as well?
So I opened my project with the PBR (alpha blend) shader settings and when I use the sticker creator the image comes out just looking flat, the foil doesnt work and none of the depth stuff is working, does it only work in select settings?
okay so there are many things that could be happening:
Are your UVs good?
What is your project resolution? Depending on the resolution it may look more or less offset from the surface.
Did you stamp your image on the same layer as what was shown in the video?
What version of painter are you using?
I recommend testing on a cube or default painter scene. If you can get it working there and not your model, it may have to do with your set up. otherwise we can look further into it
@@tiedie actually think i discovered the issue....i was using a PBR preset that didnt have base color only diffuse...
He comprado el sticker creator en Gumbroad y ¡¡viene vacío!!, faltan capas
Thank You
does this still work with the newest substance updated?
Nice work
I've watched this vid and purchased the preset. However, when I stamp my texture it comes in REALLY small, and then arbitrarily resies to larger than I need etc. I basically have no control over placement... Frustrationg as I watched the turoril and knew I needed this smart material but so far just cannot get it to work. Stickers in SP is so convoluted for what feels liek a real simple task...
Thats odd, sorry to hear that. Sounds like an issue with your brush. If you go to the brush menu and chose something basic like the hard circle and than go from there that should take care of things.
Anything in the brush setting that adds in randomness will cause something like this so double check there
Correction - I discovered my minimum brush size was default low, and making it 100% gae me the correct proportions. I also realised I must make my asset either 2048 or 4096px squre so the proportions were correct - I was getting very narrow stamps. Now these issues are fixed it's become apparent what a great tool this is! thanks for your hard work and effort and mostly for sharing.
@@millie2079 Happy to hear it was sorted out, and thanks :D
When I apply the stickers, they are stretch, there is a maximun size we need to respect? or aspect ratio?
interesting, my first thought is to look into your UVs. Are they laid out evenly? To double check, try using the sticker on just a simple plane, this should show if the issue is on the material itself or the asset.
I solved it, it was because i was not using a square texture, I just changed the canvas size in photoshop and all good ;) @@tiedie
I just re-downloaded to make sure I didn't miss an update but my Sticker Creator 2 doesn't have an Add Wear Here layer. Am I doing something wrong?
There are two versions to download, are you sure you downloaded version two?
@@tiedie Thanks for the prompt reply! I figured it out though. I didn't catch where you switched to the Mask section. On a related note, is there anyway to make the paper coverage underneath larger? I'm getting a lot of empty space between the edge of the sticker and the start of the paper underneath.
@@dalerose4958 its been awhile since i've used this but there should be. There may be a bevel layer in the maskl somewhere that controls the width of that. Its in there i just cant remember off the top of my head what layer 😅
@@tiedie Thanks! It is indeed controlled by the upper bevel mask in the Paper section!
Just got the tool. It looks like it’s gonna be great however I do have one question.
When I throw it into my project it preloads with an evangelion sticker that I can’t seem to get rid of no matter what I do.
Any suggestions on how to fix this?
I just checked the material and couldnt find anything like that. very weird, can you paint it ove via the main mask layer?
@@tiedie So I had to go through each individual mask and paint out the issue. I did try using it on a second project and I had the same issue. Not really sure what could be causing it.
I should also add that I'm pretty new at Substance Painter itself so maybe the error is something on my part.
Thanks for the quick reply though! I'll let you know if I find a way to fix it in its entirety.
@@lorenzofernandes2976 I did use a rei plush graphic to test things but that isnt in any layers when I check it on my end. Maybe it snuck its way onto something with similar UVs to yours? Kinda of funny, but if thats the case sorry you had to deal that that
@@tiedie It's all good. The smart material itself is awesome!
How do you rotate your brush like that?
When I use this tool, the Ayanami Rei sticker from Evangelion appears. How can I get rid of it?
Interesting. There shouldnt be anything loaded in by default, but as you see me do in the video you need to change the alpha and base colour of your brush before stamping on the sticker
@@tiedie i have the same problem, Ayanami Rei is apear on my texture
@@CGkipilka im going to look into this more and upload a new version soon. were you able to get her off?
@@CGkipilka I added a new version to the page. I double check all the layers and didnt see her in there so this one should fix things. its the 1.01 version :)
@@tiedie Rei is still appearing for me with the new version too :(
does this work with spec/gloss?
Bring more videos!!!
cool
Hi @Tiedie, are you still supporting this? When I add wear, it looks nothing like your video at all and looks really messy, like thick glue and no paper.
Toggling the paper layer does absolutely nothing, but I cant figure out why. :/
@@3TQHAJSHNQ a lot of this has to do with your UVs, and scene resolution. When applying this to a normal plane or cube in painter do you get the same results?
@@tiedie I just exported the default cube from blender, created a new project in 4k with it, baked maps, applied the same sticker (2k resolution) and have the same problem. It still is glooby and doesnt look like your result in the video. I'm following all the steps in your video.
Is the "quality" of the paper tied to the resolution of the basecolor? I would have thought it would be seperate.
i juste purchase your smart material and... IT DOES'T WORKS, i can't open it on substance, the file's name is "Empty" wtf ! if you have any tips, i'm so desapointed...
what platform did you buy it on and what version of painter are you using? also how did you install it?
@@tiedie thank you for your answer, I bought it on gumroad (I followed the link). I already used a cracked version of substance (subtance edition 2021 I gess) :') . I drag and drop the file on my window of substance, I retry to put the file in my substance document (doc/substance/asset/smartmaterials).
@@Sorcier3269 try dragging into your smart material shelf in substance painter. If that doesnt work im affraid your version might just be out of date. This was made in 2022 so that might be it
@@tiedie ahh ok I understand ! ok, I get substance officialy and tadaaa it's work !! Thank you very much for your time, and this smart material !
@@Sorcier3269 glad it worked out, thanks
Not worth the purchase... I'm beyond frustrated that it worked once partially but now not at all. Plus, some of the names for things within the layers aren't even the same as what he says in this video, which is the same video you get as a download when purchasing Sticker Creator 2.
free?
How to remove unwanted sticker?
You'd just erase it from the same layer you added it from