Hi there, so what was the problem? Mine after 5 years no abuse, stopped working.. Intermittent motor signal. but the gearing seems ok. Could be the switch? Thanks
Hi, there I didn't get it fully.. sir. Did you replaced the trigger switch or cleaned? Compressed air or what.. contact cleaner? Same tool same issue.. only my led lights do light up but the motor seems somewhat stuck.. sort of erratic sounds.. but seems alive. Thanks💪
Ah ok this machine tries to spray contact cleaner on any brand on part not available contact cleaner I used WD40 but it's good you use contact cleaners any brand
How the hell did you remove the chuck?
Hi there, so what was the problem?
Mine after 5 years no abuse, stopped working..
Intermittent motor signal. but the gearing seems ok.
Could be the switch?
Thanks
Change the controller ass'y/ or contact your local makita distributor or dealer in your country
where do you get the tool that connects to the transmission?
What transmission? Gear Complete you can contact your local Makita distributor or dealer in your country
I mean the tool you put on your the back of the gear assembly to rmove the chuck. The tool you put in the workbench vise
AH okay the special tools to remove the drill chuck DIY tools only sir
Hi, there I didn't get it fully.. sir. Did you replaced the trigger switch or cleaned?
Compressed air or what.. contact cleaner?
Same tool same issue.. only my led lights do light up but the motor seems somewhat stuck.. sort of erratic sounds.. but seems alive.
Thanks💪
Ah ok this machine tries to spray contact cleaner on any brand on part not available contact cleaner I used WD40 but it's good you use contact cleaners any brand
Replacing everything doesn't mean you repaired anything. You didn't even check the parts of the device.
That's why I replaced it because some people don't know how to replace ok