Hi Mark, thanks so much for the positive and very kind words 🙌🏻🙌🏻 glad you were able to do It and sounds like it’s turned out great!! Hope you keep enjoying the content on the channel 👍🏻
Thank you so much for uploading this video!! I wouldn’t have had a clue today without it! Popping the clips was terrifying but well worth it to change the faded black😍🙌
Thanks for the video, were there any sensors attached to the back of the bumper? I have heard that there are temperature sensor and pedestrian detector safety sensor that are located somewhere behind the bumper and to be careful with them as can cause a dashboard light if damaged.
Question, please. I want to remove the chrome surround and clip in a black one, as I don't intend to reuse the chrome one can I just break the clips whilst removing the trim without removing the bumper, and then clip in the new surround trim? Thanks!
Hey man, quick question. I can't find a video on how to replace the serpentine belt on the B48 mini! Do I need to remove the bumper to gain access to the belt?
Would I get away leaving my number plate plinth with 2 small holes in? Holes were from previous owners drilling in number plates. Recently bought short plates but they don't cover over the 2 number plate fixing holes. Won't cause any issues will it?
How is the number plate fitted? I'd like to get a nice clean looking one like this, but is it removable? (For shows or photo shoots.) It's a bit wonky too!! :-)
Good video man. Erm I I’m not sure if this is right, but did you get the number plate part the wrong way round? Looks as if the tow bar is on the other side ?
The tow hook is always on the right hand side, regardless if it’s a right hand drive or a left hand drive car. For cars with PDC it is impossible to mount the black part reversed. I think the same holds true for non-PDC.
I need to do this to my JCW but that looked LONG!! My bumper has gone a sort of off black with tiny bit of blue in it? Strange ... really wanna change it but that looked too long.
Hey man. Got a question.. unrated to this vid. Noticed you have the venom decals. I bought a srt. Messed it up. Bought a second... any tips as i cant seem to make it follow a particular line
Snapping the clips off - wow - it’s not that hard mate. Also the hydro dipped stuff looks rather awful to me… just get parts really made in carbon or leave it as it is. All that „pretend-wanna-be-lightness“ is just an awful decoration trend…. Just my 2 cents
Thank you for posting this. Your video gave me the courage to do the same to my vehicle...Came out great! Thanks!
Hi Mark, thanks so much for the positive and very kind words 🙌🏻🙌🏻 glad you were able to do
It and sounds like it’s turned out great!! Hope you keep enjoying the content on the channel 👍🏻
How much is the 2010mini cooper s front bumper and replacement
Thank you so much for uploading this video!! I wouldn’t have had a clue today without it! Popping the clips was terrifying but well worth it to change the faded black😍🙌
Hi Becky!! Thanks so much, glad you are happy with the result!!
Thanks for the video, were there any sensors attached to the back of the bumper? I have heard that there are temperature sensor and pedestrian detector safety sensor that are located somewhere behind the bumper and to be careful with them as can cause a dashboard light if damaged.
Question, please. I want to remove the chrome surround and clip in a black one, as I don't intend to reuse the chrome one can I just break the clips whilst removing the trim without removing the bumper, and then clip in the new surround trim? Thanks!
Hey man, quick question. I can't find a video on how to replace the serpentine belt on the B48 mini! Do I need to remove the bumper to gain access to the belt?
Would I get away leaving my number plate plinth with 2 small holes in? Holes were from previous owners drilling in number plates. Recently bought short plates but they don't cover over the 2 number plate fixing holes. Won't cause any issues will it?
I'm looking to do this next so thanks for the video!
Thanks Hollie, good luck!! If you need any help, give me a shout on instagram and i will help if i can!
Just about to attempt the same job.
Thanks for the video.
90 minutes. Job done. Thanks for your video, without it I might have been struggling to take my own short cuts which couldn't be taken.
No worries, thanks so much for watching and the positive comments!! Glad you got it sorted 🙌🏻
How is the number plate fitted? I'd like to get a nice clean looking one like this, but is it removable? (For shows or photo shoots.) It's a bit wonky too!! :-)
Manga Plates bro, means you can remove them when needed. Check them out bro 🙌🏻
Good video man. Erm I I’m not sure if this is right, but did you get the number plate part the wrong way round? Looks as if the tow bar is on the other side ?
The tow hook is always on the right hand side, regardless if it’s a right hand drive or a left hand drive car.
For cars with PDC it is impossible to mount the black part reversed. I think the same holds true for non-PDC.
I need to do this to my JCW but that looked LONG!! My bumper has gone a sort of off black with tiny bit of blue in it? Strange ... really wanna change it but that looked too long.
Nice one mate my girlfriend just put my mini threw the garage door and some how lol and that bit was the only broken bit and bent the number plate
Sorry to hear about the indecent... no worries and thanks so much for the great comment and watching 👍🏻👏🏻
Hey man. Got a question.. unrated to this vid. Noticed you have the venom decals. I bought a srt. Messed it up. Bought a second... any tips as i cant seem to make it follow a particular line
Hi man, sorry I don’t I just got very lucky haha. Only tip is keep the decal tight when laying it on… also things always look better far away haha
What size torque head did you use?
30 for the bolts to undo the bumper 👍
Are you on original cam chain
Very useful video! You might like to blur your number plate to avoid it being cloned ;-)
Thanks for watching 🙌🏻
Snapping the clips off - wow - it’s not that hard mate. Also the hydro dipped stuff looks rather awful to me… just get parts really made in carbon or leave it as it is. All that „pretend-wanna-be-lightness“ is just an awful decoration trend…. Just my 2 cents
Waaaaaay too much work for a piece of trim....
Truly pathetic watching him struggle.
I felt the same 😂