This video randomly showed up on my recommended videos. I was having this exact problem. It took me 10 minutes and now my window is fully functioning. Thank you.
Great video. Another good practice is to wipe it down really well with isopropyl alcohol because it evaporates so you don't have to worry about moisture getting stuck in your circuits... but it cleans all corrosion really well. I'm a military-trained miniature electronic repair specialist and we did months of soldering and order to remove corrosive flux and other materials we always use isopropyl alcohol to clean it really well when we were done.. using an acid brush... trim the bristles for a firmer brush.
To ANYONE that is doubting this guys video! It's for real and no bs and very easy! Just did the same on the passenger side and it's good as new. Thank you brother for the video, no shit. Social media needs more genuine, FREE videos on how to fix life's challenges! Solid dude and I appreciate you! Happy holidays to you and yours!
I appreciate that you acknowledged that this wasn’t an original idea. Another channel, one that sells parts, made the process look more difficult and didn’t even suggest cleaning the contacts. Good job!
Man I have been putting off changing that switch for the LONGEST time! I'm glad I finally decided to pull up this clip. This 6mins has saved me at least $30! Very informative and I now have a fully functional window switch for both driver and passenger windows. Thanks!
This is awesome. For two years I been leaning over using the other switch. Was quoted $200, so I kept doing without. Stumbled upon this video and literally had my windows working like new in 7 minutes. I owe you a beer if you’re ever in Arkansas.
I have dealt with my passenger side window only working intermittently for 4 years lol . After watching your video and less than 10 minutes worth of work , it works perfectly ! You are a god among men sir . I haven’t felt this stupid in a while lol
Camilo Santana Dielectric grease is nonconducting. A conductive grease would be better. And definitely use a pencil eraser. I just now did this and it worked like a charm.
technically dielectric grease is an insulator yes... but it isn't going to stop a connection. you can test this out in a million scenarios. what it does is prevent future oxidation. i've already finished and it's working fine. i use dielectric grease on everything to seal out water and prevent corrosion. the grease moves out of the way in any physical interaction between connectors and doesn't cause any shorts. were it conductive, that would be a nightmare.
Excellent little fixed took me 10 minutes. Passenger window would never roll back up been like that for years. Quick fix and didn’t cost a dime. Loved it. Appreciate it.
Awesome tip. I agree on the pencil eraser. The best eraser though is the more gritty ink eraser which is difficult to find, but a pencil eraser will work as well. Just follow the tip in the video and your driver door switch for the front passenger window will work perfectly. Thanks for this video! Saved me a trip to the dealer.
As I am EXTREMELY fond of telling my friends - You Tube is our friend.....and this particular repair fixed an issue with my 2013 Silverado. My passenger side window was misbehaving and finally quit last night (staying open 4 inches) during a rainstorm. Of course it quit then. This morning I "You Tubed", found this repair and it worked like it should have been in the General Motors repair guide. Also when I called the local Chevy dealership, I was quoted $243 for the replacement switch. Excellent video and job!!
i'm a motorcycle and electronics hobbyist - never thought to treat my truck like an arduino accessory but it seems that what vehicles are now. you just saved me $40 and time to wait on a part. it takes a fresh set of eyes to see things differently. thanks, buddy.
I just wanted to give you a shout out. I had the same problem as you and follow your instructions and I'm back in business. The only thing I did differently was use a q-tip from a gun cleaning kit and a little gun solvent to clean the contacts on both the board and the silicone strip. I followed up with using a flat-head screwdriver to lightly scrape some corrosion off. Afterward, I wiped them down and lightly applied some WD40 with another q-tip. I put everything back together and now both of the passenger sides work like new. Thanks for posting your video. :-)
My window was doing the same thing and eventually I could not roll it down, up worked fine. I was looking on amazon and almost bought a new switch. Decided to check youtube and I am glad I did. 10 minutes and a little white vinegar and I am its working just fine. Thank you for posting!
This worked great, I was down to my drivers side window working, the back passenger side switch had been replaced right after I got the truck but it only worked for about a month and cost me $300. All my windows work now and it took half an hour to do them all! Thanks!
I replaced my switch about three years ago and same issue recently came back, passenger window. Before buying another one I came across your video. Ten minutes later my window switch works perfect. Thank you!
I just did this to my girl friend's 2007 Silverado, I used a buck knife, (gently), with a little isopropyl alcohol, the corrosion came off, and now her window works perfect, THANKS! I might get some home baked cookies now. Semper Fi.
Voila! I finally quit procrastinating troubleshooting whether I had a faulty window switch, regulator, or motor and decided today's the day I fix the problem. Before I went to O'Reilly's to grab parts, I searched and stumbled across this video. I followed the easy steps, spent free-fifty on the job, and was surprised it actually worked! No money spent, only about 20 minutes of my time (including the time to watch this video), and problem solved! Fantastic video!
Omg I spent the morning checking wires and fuses with no luck… just happened to come across this video, tried it and it worked! Amazing because it seemed like it wasn’t really dirty. Been having these problems for a minute just dittling with it until it would roll up but today was the day dittling didn’t work. Try this if you’re having these problems, it was so easy!
TY SO MUCH. I did it. I'm a 73 yr old female learning to do more than I thought I was capable of. Bottom line here however is people coming together to help one another.👍
I have had this problem for about 7 months, it was driving me crazy. Sometimes I could get the passenger side window down but it wouldn’t always go back up. I would continually press the driver side controls to get it to come up once I got it down. Sometimes it wouldn’t come up at all. I was fed up and just about to call someone to fix it. I stumbled upon your video, looked pretty easy. 15 minutes later, window is working! Easy to follow and best of all I could actually SEE EVERYTHING you were doing. Amazing RUclips.
I saved this video 3 years ago......finally got around to doing it. Your video is absolute perfection. Had all my tools ready and total time from start to finish was about 10 minutes. It took longer to unclip everything than the actual repair lol. Thanks again!!!
My 2011 Chevy Silverado 1500's window switches were all acting up. Some would work when pressing down but then windows wouldn't go up. Looked all over the internet and read 1000's of different people's theories on how to fix from fuses, to broken wires, etc. Finally watched this video and decided to give it a shot. I had to perform this on every single doors window switches but they are all operating perfectly now. Quick and easy fix. Wish this was the first video I came across! Thank you!
Superior! This worked on my 2007 Chev 2500 Diesel and my switch wouldn't work at all. Thanks for saving me $165.00 for the part plus whatever the dealer would charge for lab our. Excellent!
Did this yesterday, 3 out of four windows would not move. After following your steps, all windows working perfectly!! Thanks so much!!! Dean Merida, Tampa Florida
Thanks for the video. Dropped my truck off to Window Tint guy only to receive a call from him telling my rear driver side windows was not rolling up and down. Tried your trick and now works flawlessly. Thank you and RUclips for everyday savings.
I have a 2011 silverado. Noticed this is a common problem. Called the local auto parts store. They wanted $100 for the switch. Watched your video, took 15 mins to fix and worked. Thanks bro.
Been going back and forth on getting a new cluster for years. Didn't want to spend the money so I just dealt with it. 10 minutes after watching this video all my windows work again. You the man!
John- I can't say thank you enough. Money is tight and I watched your video and said, if this works I will be AMAZED. Guess WHAT, you da MAN!!!!! It worked. Thanks again.
I did this a few years ago to the rear drivers side door and it worked. The front passenger switch AND the driver's front passenger switch were acting up. I found this video again and cleaned everything and all is well. I used a pencil eraser to clean and then this aerosol spray called corrosion x on a q-tip and dabbed all contacts just to see if it'll help keep the switches lasting longer. Thanks for uploading this video!
Awesome video! It worked and took very little time! Mine like some others in the comments, didn't seem to have too much corrosion, but definitely the circuit board surface and the membrane were dirty and sticky. I used isopropyl alcohol in a piece of cotton to clean both. It's now working perfectly! Thank you so much!!
Thank you. Just did this on my brothers truck, fixed the multiple window problems he was having. the contacts were crowded, i used Q-tips with rubbing alcohol on the contacts, cleaned them up nice.
I was having issues with the windows on a 08 silverado I just bought. I was looking up new buttons, and you know, phone watching and listening... but this video popped up. I watched it and went outside and did driver, passenger and back passenger. This worked 100% 😎 All my windows are just great now. Thank you! Just saved me a bunch of money I didn't have. 😎 If you're reading this, this video works perfectly. Do it. I'm hype asf my windows work now!
Dude, I saw your video and I have a 2013 “killer blue” Silverado. My both passenger and rear driver windows weren’t working. I did what you said. But instead of the screw driver to clean it, I used 40grid sand paper. (A piece as big as a quarter) and it cleaned it. Now my switch works like new!!!! Thanks brother. Now I can use that money for my adult beverages.... if you know what I mean. Gracias!!!!!!
IT WORKED!!!! I have not been able to put my passenger side window down for a few years, I’d just reach over and put it down from the other side. I can’t believe it was such an easy fix. Thanks for the video!
Just got an 08 2500hd, only the drivers side would roll down. after watching this video, and using my 4 month olds nail file, all the connections are clean, and I have power windows and mirrors back! I had to do this to every window switch. Only took an hour or so. Thanks man!
Thank you. Years later this is still helping. I have a 2009 LMM Diesel with the folding mirrors. The switch replacement is all-in-1 and cost over $150 plus the cost to program. All windows worked except the driver-side would not go down (not sure about up). I tried this method, pulled it all apart and didn't see anything corroded. I figured I would use the eraser trick mentioned elsewhere for cleaning it off. Erased a few gold metal dots and put the case back together. Connected to the truck before reinstalling everything and tested. HOLY CRAP IT WORKED. Thanks for the video and thanks to the eraser comments.
Did this today on my 09 seirra, I have a extended cab with rear power windows and had zero control over every window, took it apart, cleaned all the contacts and all windows worked.. thank you for posting this video..
I’ve been dealing with my window issue for over two years, and this video popped up. It literally took me 10 minutes to fix, thank you very much man this video saved me couple hundred bucks at least!!!!!!!!
Nice job bro, I took my 2009 Silverado window switch cluster apart. Found grime and beach sand. Blew everything off with compressed air, then cleaned the contacts with a #2 pencil eraser and a drip of silicone lubricant. Blew everything off again and it worked perfectly as new. 👍👍🤙
Just to add to the comments. Was getting ready to take my 2011 Silverado to the shop. No telling how much they would have charged. I'm sure they would have just put in a new switch. I was surprised how little corrosion was on the contacts. Evidently it does not take much. Works like new. THANKS!
Wow. Thanks 👍🏻 I’ve replaced that switch several times and I wish i would have seen this video before! They get like that because water from rain that runs down if your window is open at all. GM and Chevy didn’t do a good job sealing those from moisture. Your awesome for sharing that. I put some Dielectric grease on mine also and it’s seems to be helping the switch last longer from corrosion 👍🏻
I accidentally found this vid when I was looking for a vid on how to install a NEW switch, and I'm so glad I did. Just did this to my son's 08 Sierra and it worked like a charm. I suggest removing all the connectors and taking the entire switch assembly to the bench to get everything separated more easily. Thanks John, we appreciate you helpful youtubers out there, assisting us to get through these challenges.
Worked like a charm. Thanks so much for posting this how-to video, John. I am very thankful that you took the time to share what you learned. Saved me and others from paying a couple hundred dollars to a dealership.
This fix is 100% the real deal. But i used a pencil eraser to clean the contacts so as not to damage the switches. The amount of tarnish that interferes with a good connection is minimal and the eraser is adequate for success. I did all my switches in about 30 minutes. Great video!!
My driver side front window just started being balky a few days ago. I had no idea this is the way these switches were made. They are almost identical to the key fob that I took apart a couple of years ago, did the little clean up process, and it works like new. I probably would have broken something trying to get to the switches, so that tip about getting the pull handle taken off is worth about a couple of hours of time, and most likely a few thousand cuss words. Not to mention replacing the trim piece!!! Good presentation.
THANKS SO MUCH FOR THIS TUTORIAL. I'm not very mechanical but I followed your instructions to the letter and it worked like a charm. I KNOW the dealer would have replaced everything and charged me $500. I really appreciate you sharing your know how! Thanks, scott
First time trying this fix and it worked like a charm. I cleaned all the contacts and the whole thing took about 20 minutes. Thanks for such a helpful video John
I didn’t know about the eraser trick but used an alcohol wipe. I went ahead and did all the switches and they all work now. For Free!! Amazing!! Thanks a ton for the video.
No way 🤯 I just fixed my passenger window that hasn’t worked in 4 years. I ended up cleaning the contacts on the passenger side as well because it still wouldn’t roll up on that side. Does now!!! Thanks!
Wow! Thank you! I doubted this video so much......then after looking at my switches opened up and didnt notice any real corrosion.......but i did what you said and then checked the button. It absolutely worked!! Ive been dealing with my passenger window not wanting to roll back up for 2 yrs......i just chose not to use it. Thank you!! 😁
3 out of 4 windows weren't working yesterday, today all 4 are working. We did this for each window and now each individual window works as well as the driver switch works for all the windows now. I used the pencil eraser as suggested in the comments. Thanks for the video!!
Sir I came across your video as I was looking for a fix for the very same reason on my 2011 Silverado. I followed what you did and it worked like a charm. Thank you for your well explained video. Ottawa Ontario Canada.
Thank you so much. This was the first video I watched on this issue. My 2013 GMC Sierra started having problems with rear passenger side window. Last week the passenger side wouldn't roll down, but would click. I used a pencil eraser and cleaned up corrosion on contacts.
Update - it worked for me! I used 1000 grit paper to remove the corrosion and contact cleaner and cotton swab to clean before and after. If you see any dark "print" on the contacts, that is the corrosion. Contacts should be smooth and shiny. Thanks again!
Wow, less than 10 minutes and fully operational again. Only took a surprisingly small amount (a few dots) of corrosion or gunk to interrupt proper operation. Thanks, thanks, thanks!
Literally just tried this after A Major Deep cleaning for my truck. Went 5 yrs not being able to operate the passanger side window. Decided to try ot and wham. Felt like a brand new truck just came into my life. 😆
I just bought a used 2011 Sierra, a sound truck overall but one problem was the front passenger window switch from the master set of 4 had pooped the bed, I figured I'd got to a U-pull yard for a new used switch console, but I googled the problem and voila! 20 minutes work in my front yard, didn't even get my hands dirty. Merci Beaucoup!
Thank you so much! My Silverado had the same problem. Your explaining the steps work perfect. Went exactly as you showed. Mine has been inoperable for over a year and I had no idea what to do..Works like new.Thank you!!
I have 2011 silverado. Same problem you had with your pickup. I did exactly what you did. Fixed the problem. I can operate the passenger side window, from the driver's side. Thanks a bunch👍
Worked great! This happened under warranty and the switch was $$65 and the deductible was $100. So basically I threw $100 away. Thanks for the tip and thanks RUclips!
This actually works, realistically takes about 5-10 minutes, and I used a knife to clean the contact instead of a flathead. The screwdriver wasn’t quite small enough in my case. Thanks for posting!
Excellent video. I had the same problem with my 2016 Chevy Traverse - passenger window not working. I purchased a replacement switch for $25 on Amazon, had the part in 2 days, took about 20 minutes to replace it. Works great so I was feeling good for cheating the dealership out of a $120 repair, then I watched your video. ☹️ Great video. I have two more older vehicles so I’ll probably get another shot at it.
Thank you for the tutorial. Fixed mine in 10 minutes. Used the pencil eraser trick rather than scraping with a screw driver. Now all windows work perfectly.
Thanks so much for this video! I have a 2010 GMC Sierra Some switches from the master control were intermittent and some had stopped working altogether. The only thing I did differently than the video was I used a cotton swab with some rubbing alcohol to clear the contacts. Of course I made sure everything was dry before I re-installed the switches. I can't thank you enough! This solved a problem that's been going on with my truck for a little over a year now!
Worked like a charm!!!! 2012 Chevy Silverado 2500HD 6.0l. Wish I had seen this video before i purchased a new switch. Nevertheless, these steps fixed my passenger window. Will keep the new switch bank as a spare. Thank you very much for posting!!!
I followed the directions on the video to the letter…… although there didn’t appear to be any corrosion, I used a pencil erasure and rubbed on the passenger side gold looking area and put everything back together. Boom…..!!!! It works like a champ. I’ve been riding around for about 2 years being unable to bring the window up … unless I reached over and used the passenger side button. Thanks for a great video. By the way … I have a 2011 Chevy 1500 Silverado 155k Miles….. I’m gonna try to keep it for another 150K….. especially with the prices of new & used cars being ridiculous…..!!!
John vessel your doing gods work.. I saw this video, did exactly what you said and it worked I have replaced the switches once already, and not been able to roll my passenger window up without leaning over to do so for 3 months because I didn't want to buy another one for the exact same issue, thank you very much for sharing!
JV Garage this was an excellent video! I have a 2011 Sierra with 250K km and your "How To" video on taking the switch out and cleaning the important parts kept me on the straight and narrow. The entire area was very dirty and benefitted from a total damp cloth wipe down. I ended up taking the entire door piece that the switch sits in so I could clean that too - of note the harness plug for the door lock switch first has a horizontal sliding clip that has to come out first (I suspect it's there to cover some exposed wiring that's energized when the truck is off) followed by the vertical clip that releases the lock switch itself (I had to work it back'n forth but it came off). I doubt that part of the door has been that clean since not long after leaving the factory. Another thing I did was sprayed electrical contact cleaner over the plug pins and window switch contacts both on the circuit board and on the silicone cover and let it all dry thoroughly for about 30 minutes to take care of any grease/oil that I couldn't see. Then I rubbed the contact areas with a clean shop towel followed with light scraping from a small flathead. It was very satisfying putting it all back together and seeing how smoothly the rear passenger window went down and up with the window switch. Thank you for making this video!
Thank you very much, use this video a little while back to get one of my windows up. But it was getting dark out so I really didn’t have time to clean my switchboard. Two days ago with 20° weather out my nephew hits the back window button and rolls the window half down. Normally the replacement switches were costing around $69, I actually saw one onwest.com and ordered it for like $26. Just referred back to your video and switched it out in a matter of 10 minutes without even hardly having to open my truck door and be exposed to the cold weather. Thank you so much for your video, have a blessed day✌🏻
Thanks alot for this video !!! You saved me $25 plus tax or more because 2 of my switches were not working. Only took me a bit of time . My '09 GMC had this issue. What you showed me worked perfect... Back window was driving me nuts also , with the same problem. Now all my windows work. Yay !! 🍻
Thank you for the vid, you just saved me a pile of money. Here in Canada, they charge between $110 & &125/hour plus the part because I know they would have changed the whole unit. I watched another mechanic on RUclips fix the same problem and the first thing he did was order the whole unit instead of cleaning the contacts. Thanks again.
Genius. Thank you so much. I came on RUclips to find out what part I have to order. Well, to my surprise, no part to order. I feel indebted to you. Thank you for such super-fantastic, simple, informative video. Many many thanks.
I was able to leave the door handle on and just worked the unit up and out. I replaced the switch with a new one for $15.00. Amazon next day delivery. Thx for the video. 👍
Thanks, this absolutely WORKS! I found my front 2 windows were not reliably going up or down, and I didn't want to get stuck with windows that weren't reliable. The whole process on the driver switch assembly took maybe 30 minutes and I took my time. Saved me a lot of money!
Great video.My driver’s window switch worked when it wanted to.watched video and cleaned contacts with an eraser and about 15 min later switch works like new. Thanks again.
Appreciate this video and the commenters that suggested a pencil eraser! Broke my driver side door handle on my new to me ‘11 Silverado and only the driver side window would roll up from the driver side, all would roll down. The passenger side switch would roll the passenger window down but not up, the rear switches work fine. Cleaned the contacts with the eraser when I pulled the door apart to fix the handle and all the windows work now! lol Just need to get the rear speakers back working and she’s right off the showroom floor!
dude... after i was down to one window working from the driver's side i thought ok... lemme try something.... i'm not the handiest guy and this was super easy THANK YOU!
Can confirm it works. Did my buddy's switches today, and it worked first try after reassembling everything. I used 300-grit sandpaper to very gently clean off the corrosion, then wiped it with rubbing alcohol.
Official Merch: jvgarage.com/
Thanks so much for this video:!! You saved me a lot of money and headaches
Same here
It didn't take me no more than 15 minutes.. thanks
This video randomly showed up on my recommended videos. I was having this exact problem. It took me 10 minutes and now my window is fully functioning. Thank you.
Algorithms
O it was definitely not RANDOM! lol your phones constantly listening to every word you say or type.
ditto
Great video. Another good practice is to wipe it down really well with isopropyl alcohol because it evaporates so you don't have to worry about moisture getting stuck in your circuits... but it cleans all corrosion really well. I'm a military-trained miniature electronic repair specialist and we did months of soldering and order to remove corrosive flux and other materials we always use isopropyl alcohol to clean it really well when we were done.. using an acid brush... trim the bristles for a firmer brush.
Thats what i used on my GMC, alcohol. Cheaper and easier to fix the switch than replace it.
That is the first thing I thought of while watching him try to scrape off corrosion on a semiconductor with a flathead screwdriver.
To ANYONE that is doubting this guys video! It's for real and no bs and very easy! Just did the same on the passenger side and it's good as new. Thank you brother for the video, no shit. Social media needs more genuine, FREE videos on how to fix life's challenges! Solid dude and I appreciate you! Happy holidays to you and yours!
I appreciate that you acknowledged that this wasn’t an original idea. Another channel, one that sells parts, made the process look more difficult and didn’t even suggest cleaning the contacts. Good job!
Just did it and it worked. I used a pencil eraser like everyone recommended. Saved a bunch..thanks a bunch John and commentors!
Man I have been putting off changing that switch for the LONGEST time! I'm glad I finally decided to pull up this clip. This 6mins has saved me at least $30! Very informative and I now have a fully functional window switch for both driver and passenger windows. Thanks!
This is awesome. For two years I been leaning over using the other switch. Was quoted $200, so I kept doing without. Stumbled upon this video and literally had my windows working like new in 7 minutes. I owe you a beer if you’re ever in Arkansas.
Shoot I vacation there so I might have to take up that offer lol
I have dealt with my passenger side window only working intermittently for 4 years lol . After watching your video and less than 10 minutes worth of work , it works perfectly ! You are a god among men sir . I haven’t felt this stupid in a while lol
Safer way is use a fresh pencil eraser. You don't risk damaging the board or the contacts.
i second that. wondering if i should put a super thin layer of dielectric grease to prevent it from coming back.
I never thought of that, it definitely makes sense to prevent it again.
Camilo Santana Dielectric grease is nonconducting. A conductive grease would be better.
And definitely use a pencil eraser.
I just now did this and it worked like a charm.
Dielectric grease would prevent any shorts while providing a barrier to the elements. That’s why you use it for head light bulbs during installation.
technically dielectric grease is an insulator yes... but it isn't going to stop a connection. you can test this out in a million scenarios. what it does is prevent future oxidation. i've already finished and it's working fine.
i use dielectric grease on everything to seal out water and prevent corrosion. the grease moves out of the way in any physical interaction between connectors and doesn't cause any shorts. were it conductive, that would be a nightmare.
My 2013 started acting up at 55k ...after watching this I gave it a shot and it works flawlessly THANK YOU !!!!
Excellent little fixed took me 10 minutes. Passenger window would never roll back up been like that for years. Quick fix and didn’t cost a dime. Loved it. Appreciate it.
Awesome tip. I agree on the pencil eraser. The best eraser though is the more gritty ink eraser which is difficult to find, but a pencil eraser will work as well. Just follow the tip in the video and your driver door switch for the front passenger window will work perfectly. Thanks for this video! Saved me a trip to the dealer.
As I am EXTREMELY fond of telling my friends - You Tube is our friend.....and this particular repair fixed an issue with my 2013 Silverado. My passenger side window was misbehaving and finally quit last night (staying open 4 inches) during a rainstorm. Of course it quit then. This morning I "You Tubed", found this repair and it worked like it should have been in the General Motors repair guide. Also when I called the local Chevy dealership, I was quoted $243 for the replacement switch. Excellent video and job!!
i'm a motorcycle and electronics hobbyist - never thought to treat my truck like an arduino accessory but it seems that what vehicles are now. you just saved me $40 and time to wait on a part. it takes a fresh set of eyes to see things differently.
thanks, buddy.
Watched, completed and repaired! Had the same exact issue on my ‘12. Thanks for the video- saved me 20 bucks on a switch replacement
I’ve never commented on a RUclips video before, but felt like I had to after following your instructions. IT WORKED! I too am in disbelief!
Glad it helped!
I just wanted to give you a shout out. I had the same problem as you and follow your instructions and I'm back in business. The only thing I did differently was use a q-tip from a gun cleaning kit and a little gun solvent to clean the contacts on both the board and the silicone strip. I followed up with using a flat-head screwdriver to lightly scrape some corrosion off. Afterward, I wiped them down and lightly applied some WD40 with another q-tip. I put everything back together and now both of the passenger sides work like new. Thanks for posting your video. :-)
My window was doing the same thing and eventually I could not roll it down, up worked fine. I was looking on amazon and almost bought a new switch. Decided to check youtube and I am glad I did. 10 minutes and a little white vinegar and I am its working just fine. Thank you for posting!
This worked great, I was down to my drivers side window working, the back passenger side switch had been replaced right after I got the truck but it only worked for about a month and cost me $300. All my windows work now and it took half an hour to do them all! Thanks!
I replaced my switch about three years ago and same issue recently came back, passenger window. Before buying another one I came across your video. Ten minutes later my window switch works perfect. Thank you!
I just did this to my girl friend's 2007 Silverado, I used a buck knife, (gently), with a little isopropyl alcohol, the corrosion came off, and now her window works perfect, THANKS! I might get some home baked cookies now. Semper Fi.
I searched RUclips for this exact issue, this video popped up and I did exactly what this video said to do and now my passenger window works! Thanks
Voila! I finally quit procrastinating troubleshooting whether I had a faulty window switch, regulator, or motor and decided today's the day I fix the problem. Before I went to O'Reilly's to grab parts, I searched and stumbled across this video. I followed the easy steps, spent free-fifty on the job, and was surprised it actually worked! No money spent, only about 20 minutes of my time (including the time to watch this video), and problem solved! Fantastic video!
Omg I spent the morning checking wires and fuses with no luck… just happened to come across this video, tried it and it worked! Amazing because it seemed like it wasn’t really dirty. Been having these problems for a minute just dittling with it until it would roll up but today was the day dittling didn’t work. Try this if you’re having these problems, it was so easy!
TY SO MUCH. I did it. I'm a 73 yr old female learning to do more than I thought I was capable of. Bottom line here however is people coming together to help one another.👍
I have had this problem for about 7 months, it was driving me crazy. Sometimes I could get the passenger side window down but it wouldn’t always go back up. I would continually press the driver side controls to get it to come up once I got it down. Sometimes it wouldn’t come up at all. I was fed up and just about to call someone to fix it. I stumbled upon your video, looked pretty easy. 15 minutes later, window is working! Easy to follow and best of all I could actually SEE EVERYTHING you were doing. Amazing RUclips.
I saved this video 3 years ago......finally got around to doing it. Your video is absolute perfection. Had all my tools ready and total time from start to finish was about 10 minutes. It took longer to unclip everything than the actual repair lol. Thanks again!!!
My 2011 Chevy Silverado 1500's window switches were all acting up. Some would work when pressing down but then windows wouldn't go up. Looked all over the internet and read 1000's of different people's theories on how to fix from fuses, to broken wires, etc. Finally watched this video and decided to give it a shot. I had to perform this on every single doors window switches but they are all operating perfectly now. Quick and easy fix. Wish this was the first video I came across! Thank you!
Superior! This worked on my 2007 Chev 2500 Diesel and my switch wouldn't work at all. Thanks for saving me $165.00 for the part plus whatever the dealer would charge for lab our. Excellent!
Did this yesterday, 3 out of four windows would not move. After following your steps, all windows working perfectly!! Thanks so much!!! Dean Merida, Tampa Florida
Thanks for the video. Dropped my truck off to Window Tint guy only to receive a call from him telling my rear driver side windows was not rolling up and down. Tried your trick and now works flawlessly. Thank you and RUclips for everyday savings.
I have a 2011 silverado. Noticed this is a common problem. Called the local auto parts store. They wanted $100 for the switch. Watched your video, took 15 mins to fix and worked.
Thanks bro.
Been going back and forth on getting a new cluster for years. Didn't want to spend the money so I just dealt with it. 10 minutes after watching this video all my windows work again. You the man!
John- I can't say thank you enough. Money is tight and I watched your video and said, if this works I will be AMAZED. Guess WHAT, you da MAN!!!!! It worked. Thanks again.
I did this a few years ago to the rear drivers side door and it worked. The front passenger switch AND the driver's front passenger switch were acting up. I found this video again and cleaned everything and all is well. I used a pencil eraser to clean and then this aerosol spray called corrosion x on a q-tip and dabbed all contacts just to see if it'll help keep the switches lasting longer. Thanks for uploading this video!
Awesome video! It worked and took very little time!
Mine like some others in the comments, didn't seem to have too much corrosion, but definitely the circuit board surface and the membrane were dirty and sticky. I used isopropyl alcohol in a piece of cotton to clean both. It's now working perfectly! Thank you so much!!
Just did this... followed along video...now all window's are working. Took me 20 minutes...
Thank you Sir....
Thank you. Just did this on my brothers truck, fixed the multiple window problems he was having. the contacts were crowded, i used Q-tips with rubbing alcohol on the contacts, cleaned them up nice.
I was having issues with the windows on a 08 silverado I just bought. I was looking up new buttons, and you know, phone watching and listening... but this video popped up. I watched it and went outside and did driver, passenger and back passenger. This worked 100% 😎 All my windows are just great now. Thank you! Just saved me a bunch of money I didn't have. 😎 If you're reading this, this video works perfectly. Do it. I'm hype asf my windows work now!
Dude, I saw your video and I have a 2013 “killer blue” Silverado. My both passenger and rear driver windows weren’t working. I did what you said. But instead of the screw driver to clean it, I used 40grid sand paper. (A piece as big as a quarter) and it cleaned it. Now my switch works like new!!!! Thanks brother. Now I can use that money for my adult beverages.... if you know what I mean. Gracias!!!!!!
IT WORKED!!!! I have not been able to put my passenger side window down for a few years, I’d just reach over and put it down from the other side. I can’t believe it was such an easy fix. Thanks for the video!
Just got an 08 2500hd, only the drivers side would roll down. after watching this video, and using my 4 month olds nail file, all the connections are clean, and I have power windows and mirrors back! I had to do this to every window switch. Only took an hour or so. Thanks man!
Thank you. Years later this is still helping. I have a 2009 LMM Diesel with the folding mirrors. The switch replacement is all-in-1 and cost over $150 plus the cost to program. All windows worked except the driver-side would not go down (not sure about up). I tried this method, pulled it all apart and didn't see anything corroded. I figured I would use the eraser trick mentioned elsewhere for cleaning it off. Erased a few gold metal dots and put the case back together. Connected to the truck before reinstalling everything and tested. HOLY CRAP IT WORKED. Thanks for the video and thanks to the eraser comments.
Did this today on my 09 seirra, I have a extended cab with rear power windows and had zero control over every window, took it apart, cleaned all the contacts and all windows worked.. thank you for posting this video..
I’ve been dealing with my window issue for over two years, and this video popped up. It literally took me 10 minutes to fix, thank you very much man this video saved me couple hundred bucks at least!!!!!!!!
Nice job bro, I took my 2009 Silverado window switch cluster apart. Found grime and beach sand. Blew everything off with compressed air, then cleaned the contacts with a #2 pencil eraser and a drip of silicone lubricant. Blew everything off again and it worked perfectly as new. 👍👍🤙
Just to add to the comments. Was getting ready to take my 2011 Silverado to the shop. No telling how much they would have charged. I'm sure they would have just put in a new switch. I was surprised how little corrosion was on the contacts. Evidently it does not take much. Works like new. THANKS!
Wow. Thanks 👍🏻 I’ve replaced that switch several times and I wish i would have seen this video before! They get like that because water from rain that runs down if your window is open at all. GM and Chevy didn’t do a good job sealing those from moisture. Your awesome for sharing that. I put some Dielectric grease on mine also and it’s seems to be helping the switch last longer from corrosion 👍🏻
I accidentally found this vid when I was looking for a vid on how to install a NEW switch, and I'm so glad I did. Just did this to my son's 08 Sierra and it worked like a charm. I suggest removing all the connectors and taking the entire switch assembly to the bench to get everything separated more easily. Thanks John, we appreciate you helpful youtubers out there, assisting us to get through these challenges.
Worked like a charm. Thanks so much for posting this how-to video, John. I am very thankful that you took the time to share what you learned. Saved me and others from paying a couple hundred dollars to a dealership.
This fix is 100% the real deal. But i used a pencil eraser to clean the contacts so as not to damage the switches. The amount of tarnish that interferes with a good connection is minimal and the eraser is adequate for success. I did all my switches in about 30 minutes. Great video!!
My driver side front window just started being balky a few days ago. I had no idea this is the way these switches were made. They are almost identical to the key fob that I took apart a couple of years ago, did the little clean up process, and it works like new. I probably would have broken something trying to get to the switches, so that tip about getting the pull handle taken off is worth about a couple of hours of time, and most likely a few thousand cuss words. Not to mention replacing the trim piece!!! Good presentation.
Cleaned the contacts on a passenger window switch, works now. Took all of 10 minutes. Thank you!!
Awesome video. The dealer wanted me to pay $285 for this very simple fix. Took me 20 minutes and window works fine now. Thanks!!
You’re a good man! Removed the corrosion with the eraser.....Passenger window works 100%. Thank you.
THANKS SO MUCH FOR THIS TUTORIAL. I'm not very mechanical but I followed your instructions to the letter and it worked like a charm. I KNOW the dealer would have replaced everything and charged me $500. I really appreciate you sharing your know how! Thanks, scott
First time trying this fix and it worked like a charm. I cleaned all the contacts and the whole thing took about 20 minutes.
Thanks for such a helpful video John
Just did this today for my brother-in-law's truck. I can confirm this works. Thank you!
I didn’t know about the eraser trick but used an alcohol wipe. I went ahead and did all the switches and they all work now. For Free!! Amazing!! Thanks a ton for the video.
No way 🤯 I just fixed my passenger window that hasn’t worked in 4 years. I ended up cleaning the contacts on the passenger side as well because it still wouldn’t roll up on that side. Does now!!! Thanks!
Wow! Thank you! I doubted this video so much......then after looking at my switches opened up and didnt notice any real corrosion.......but i did what you said and then checked the button. It absolutely worked!! Ive been dealing with my passenger window not wanting to roll back up for 2 yrs......i just chose not to use it. Thank you!! 😁
3 out of 4 windows weren't working yesterday, today all 4 are working. We did this for each window and now each individual window works as well as the driver switch works for all the windows now. I used the pencil eraser as suggested in the comments. Thanks for the video!!
Sir I came across your video as I was looking for a fix for the very same reason on my 2011 Silverado. I followed what you did and it worked like a charm. Thank you for your well explained video. Ottawa Ontario Canada.
Thank you so much. This was the first video I watched on this issue. My 2013 GMC Sierra started having problems with rear passenger side window. Last week the passenger side wouldn't roll down, but would click. I used a pencil eraser and cleaned up corrosion on contacts.
Update - it worked for me! I used 1000 grit paper to remove the corrosion and contact cleaner and cotton swab to clean before and after. If you see any dark "print" on the contacts, that is the corrosion. Contacts should be smooth and shiny. Thanks again!
Wow, less than 10 minutes and fully operational again.
Only took a surprisingly small amount (a few dots) of corrosion or gunk to interrupt proper operation.
Thanks, thanks, thanks!
Literally just tried this after A Major Deep cleaning for my truck.
Went 5 yrs not being able to operate the passanger side window. Decided to try ot and wham. Felt like a brand new truck just came into my life. 😆
I just bought a used 2011 Sierra, a sound truck overall but one problem was the front passenger window switch from the master set of 4 had pooped the bed, I figured I'd got to a U-pull yard for a new used switch console, but I googled the problem and voila! 20 minutes work in my front yard, didn't even get my hands dirty. Merci Beaucoup!
Thank you so much! My Silverado had the same problem. Your explaining the steps work perfect. Went exactly as you showed. Mine has been inoperable for over a year and I had no idea what to do..Works like new.Thank you!!
Thanks! Fastest, easiest car repair I've ever done. Took me less than 5 minutes
I have 2011 silverado. Same problem you had with your pickup.
I did exactly what you did. Fixed the problem. I can operate the passenger side window, from the driver's side. Thanks a bunch👍
Awesome thank you worked perfect. I also used a little rubbing alcohol on the end of a q-tip to clean and another to dry off.
Worked great! This happened under warranty and the switch was $$65 and the deductible was $100. So basically I threw $100 away. Thanks for the tip and thanks RUclips!
I had the same exact issue with the passenger window on my 2010 Silverado. I followed your instr & now it works perfectly. Thank you.
THANK YOU MY GOOD SIR YOUR A GENTLEMEN AND A SCHOLAR FIXED MY PROBLEM
This actually works, realistically takes about 5-10 minutes, and I used a knife to clean the contact instead of a flathead. The screwdriver wasn’t quite small enough in my case. Thanks for posting!
Excellent video. I had the same problem with my 2016 Chevy Traverse - passenger window not working. I purchased a replacement switch for $25 on Amazon, had the part in 2 days, took about 20 minutes to replace it. Works great so I was feeling good for cheating the dealership out of a $120 repair, then I watched your video.
☹️
Great video. I have two more older vehicles so I’ll probably get another shot at it.
Thank you for the tutorial. Fixed mine in 10 minutes. Used the pencil eraser trick rather than scraping with a screw driver. Now all windows work perfectly.
Thanks so much for this video! I have a 2010 GMC Sierra Some switches from the master control were intermittent and some had stopped working altogether. The only thing I did differently than the video was I used a cotton swab with some rubbing alcohol to clear the contacts. Of course I made sure everything was dry before I re-installed the switches. I can't thank you enough! This solved a problem that's been going on with my truck for a little over a year now!
Worked like a charm!!!! 2012 Chevy Silverado 2500HD 6.0l. Wish I had seen this video before i purchased a new switch. Nevertheless, these steps fixed my passenger window. Will keep the new switch bank as a spare. Thank you very much for posting!!!
⭐⭐⭐⭐⭐ Works 100% and took ten minutes. Dealer wanted $185 to replace. Thank You.
I followed the directions on the video to the letter…… although there didn’t appear to be any corrosion, I used a pencil erasure and rubbed on the passenger side gold looking area and put everything back together.
Boom…..!!!! It works like a champ. I’ve been riding around for about 2 years being unable to bring the window up … unless I reached over and used the passenger side button. Thanks for a great video. By the way … I have a 2011 Chevy 1500 Silverado 155k Miles….. I’m gonna try to keep it for another 150K….. especially with the prices of new & used cars being ridiculous…..!!!
John vessel your doing gods work.. I saw this video, did exactly what you said and it worked I have replaced the switches once already, and not been able to roll my passenger window up without leaning over to do so for 3 months because I didn't want to buy another one for the exact same issue, thank you very much for sharing!
Absolutely works. I did it last night and couldnt be happier considering the A/C stopped working.
JV Garage this was an excellent video! I have a 2011 Sierra with 250K km and your "How To" video on taking the switch out and cleaning the important parts kept me on the straight and narrow. The entire area was very dirty and benefitted from a total damp cloth wipe down. I ended up taking the entire door piece that the switch sits in so I could clean that too - of note the harness plug for the door lock switch first has a horizontal sliding clip that has to come out first (I suspect it's there to cover some exposed wiring that's energized when the truck is off) followed by the vertical clip that releases the lock switch itself (I had to work it back'n forth but it came off). I doubt that part of the door has been that clean since not long after leaving the factory. Another thing I did was sprayed electrical contact cleaner over the plug pins and window switch contacts both on the circuit board and on the silicone cover and let it all dry thoroughly for about 30 minutes to take care of any grease/oil that I couldn't see. Then I rubbed the contact areas with a clean shop towel followed with light scraping from a small flathead. It was very satisfying putting it all back together and seeing how smoothly the rear passenger window went down and up with the window switch. Thank you for making this video!
Thank you very much, use this video a little while back to get one of my windows up. But it was getting dark out so I really didn’t have time to clean my switchboard. Two days ago with 20° weather out my nephew hits the back window button and rolls the window half down. Normally the replacement switches were costing around $69, I actually saw one onwest.com and ordered it for like $26. Just referred back to your video and switched it out in a matter of 10 minutes without even hardly having to open my truck door and be exposed to the cold weather. Thank you so much for your video, have a blessed day✌🏻
Thanks alot for this video !!! You saved me $25 plus tax or more because 2 of my switches were not working. Only took me a bit of time . My '09 GMC had this issue. What you showed me worked perfect... Back window was driving me nuts also , with the same problem. Now all my windows work. Yay !! 🍻
Thank you for the vid, you just saved me a pile of money. Here in Canada, they charge between $110 & &125/hour plus the part because I know they would have changed the whole unit. I watched another mechanic on RUclips fix the same problem and the first thing he did was order the whole unit instead of cleaning the contacts. Thanks again.
Genius. Thank you so much. I came on RUclips to find out what part I have to order. Well, to my surprise, no part to order. I feel indebted to you. Thank you for such super-fantastic, simple, informative video. Many many thanks.
Tried this and it worked! Been reaching over for the passenger window and behind for the driver rear window for a few years 🙄
I was able to leave the door handle on and just worked the unit up and out. I replaced the switch with a new one for $15.00. Amazon next day delivery. Thx for the video. 👍
Followed the instructions and now my passenger window works perfectly. Super thanks!
Thanks, this absolutely WORKS! I found my front 2 windows were not reliably going up or down, and I didn't want to get stuck with windows that weren't reliable. The whole process on the driver switch assembly took maybe 30 minutes and I took my time. Saved me a lot of money!
Great video.My driver’s window switch worked when it wanted to.watched video and cleaned contacts with an eraser and about 15 min later switch works like new. Thanks again.
Appreciate this video and the commenters that suggested a pencil eraser! Broke my driver side door handle on my new to me ‘11 Silverado and only the driver side window would roll up from the driver side, all would roll down. The passenger side switch would roll the passenger window down but not up, the rear switches work fine.
Cleaned the contacts with the eraser when I pulled the door apart to fix the handle and all the windows work now! lol
Just need to get the rear speakers back working and she’s right off the showroom floor!
dude... after i was down to one window working from the driver's side i thought ok... lemme try something.... i'm not the handiest guy and this was super easy THANK YOU!
Can confirm it works. Did my buddy's switches today, and it worked first try after reassembling everything. I used 300-grit sandpaper to very gently clean off the corrosion, then wiped it with rubbing alcohol.
My passenger side window hasn't worked in years thought.. I should check YT. EVEN HAD MY DOUBTS! 100% worked like a charm!! Thanks Man!!
I've been frustrated with my windows for over a year and this was all it took. Thank you!