Xin góp ý cùng bạn trẻ, bạn nên rửa bằng dầu lửa trong 1 cái thau, rửa bằng nước (?) rồi xả thẳng xuống cống, sẽ gây ô nhiễm môi trường. Tôi thích kênh của bạn.
Although some say, I'm just admiring what you can do with a rotten engine and four screwdrivers while for many "more civilized", they would need the machine that goes well with the necessary products that cost much more. Continue to make me dream, I who only know how to start my car (and then, that's all) Hi from Paris
Great restoration, good work, I noticed you use sealent then gasget then some more sealent, that's what I do too, I find it works better than just gasget, better than having to fix a leak later
There was nothing done to the engine but a general clean-up. No new piston rings, no valves ground, which are always problems found on old Japanese motorbikes.
Buenas noches le dire que usted es muy profecional me gusta lo que repara he visto las motos los telefonos las maquinas de coser y los colores que les da es precioso el fin.muy bello todo.ahora estoy viendo una moto pero trabajas muy rapido tienes mucha experiencias en todo lo que haces cuide.sus manos y pongace guantes Dios lo bendiga amén
So refreshing to see the opposite of the throw away culture of the western world but....... 1. 1st stage of any engine disassembly...........clean the outside of the engine cases!! 2. NEVER split a casing by forcing a screwdriver between them. 3. Lube as you go!!
You can skip first stage , if you are going to rebuild the engine you ALWAYS WASH cases ,and every engine part . I agree with second stage ,but i dissagree with third stage , you don't need to lube anything while you're spilitting cases
Bei der Arbeit hab ich zwar manchmal gedacht "Warum bitte haut der darauf rum oder macht das so pfuschig?", aber hey, das Teil läuft und wird wahrscheinlich noch lange durch die Gegend knattern und das ist das wichtigste. Ärmel hochgekrempelt und angepackt ist immer noch besser als Portmonaie aufgemacht und neu gekauft.
@@JeffreyStrader Down here in the hot and muggy south, brake clean doesn't last but a few dozens of seconds once it leaves the can. If it's used sparingly, it won't do anything at all. I tore down a 1980 Chevy small block 350 a few days ago and it took 6 large cans of brake clean and a wire brush to get all the crap off of it.
La limpieza muy bien ! El ensamble te puedo decir que te olvidaste de poner la tuerca del embrague y no hace falta pegamento . Te faltó esmerilar válvulas , brunir cilindro ,cambiar aros y retenes .y la puesta en marcha ! seguro te faltó aceite en el cárter . Porque sin las tapas de regulación de válvulas puestas sería un enchastre ! Ah y te paso la luz de válvulas 0,5 ADM y 10 ESC .
I hope you don't mind me asking but at 22.35 what music were you playing? Nice tune... But very satisfying video to watch, and you make long hours,you can hear that. Greetings from Holland
Масло то не залил. Крышки регулировки клапанов открыты и если бы там было масло то брызгало бы в разные стороны. А так перебрал мотор и сразу увалил его.
@@Reelssss1337 клапанная крышка открыта и в момент работы мотора на клапана подаётся масло маслонасосом и поверьте ляполо бы в разные стороны. А так нет масла ляпать нечему!
Nice for sharing.
Good job 👍
thank you
Thanks 👍
outstanding rebuild.
Chào bạn luôn ủng hộ anh
thank nhé
THANKIOU
Job well done my child
Xin góp ý cùng bạn trẻ, bạn nên rửa bằng dầu lửa trong 1 cái thau, rửa bằng nước (?) rồi xả thẳng xuống cống, sẽ gây ô nhiễm môi trường. Tôi thích kênh của bạn.
Although some say, I'm just admiring what you can do with a rotten engine and four screwdrivers while for many "more civilized", they would need the machine that goes well with the necessary products that cost much more. Continue to make me dream, I who only know how to start my car (and then, that's all)
Hi from Paris
Very good restoration 👍👍👍Thanks for sharing
thank you
Loncin it's a Chinese brand of engines ( very good, make for BMW, Sthil etc) . Not japanese. Cheers. Ps - nice video.
You"r a top mechanic sir Bravo !
thank you
Very good restoration work!!! Thanks for the upload.
Thank you for liking our videos
Fantástico, parabéns, excelente trabalho.
Xe biển Việt Nam tôi đoán clip do team
Vn sản xuất 🇻🇳
Is the motorbike really made in Japan?
Cool that he could refurbished an old engine with only basic tools...
You do good work
nice work
Last 3 minutes only iam watching.
Carburetor Fed SOHC 2 valves 1 Cylinder
Centrifugal Clutch
4 speed gearbox
Simplest 4 stroke motorcycle engine to work on! I Love It
Great restoration, good work, I noticed you use sealent then gasget then some more sealent, that's what I do too, I find it works better than just gasget, better than having to fix a leak later
thank you very muck
video good. thank you restoration engine
thank you very muck
Very Smart Fellows, great job!
thank you very muck
There was nothing done to the engine but a general clean-up. No new piston rings, no valves ground, which
are always problems found on old Japanese motorbikes.
i think the same way..they only clean it....useless..
So what would you do as an engine restoration?.
Motorbikes not kapcai
Buenas noches le dire que usted es muy profecional me gusta lo que repara he visto las motos los telefonos las maquinas de coser y los colores que les da es precioso el fin.muy bello todo.ahora estoy viendo una moto pero trabajas muy rapido tienes mucha experiencias en todo lo que haces cuide.sus manos y pongace guantes Dios lo bendiga amén
awesome job well done
what a Restoration , looked like it should be junk ,nice work
Restoration, or just cleanup? I saw no valve lapping, cylinder honing, new piston rings etc. But good job in the tear down/reassembly
More like disassembling and reassembling plus cleaning.
More like sandblasting opened cylinder
Parabéns maravilhoso trabalho tmj.
Старая техника - с душой. Надежная, как топор. Милая сердцу, как бабушкины сказки.
Что разобрал, то и собрал! А смысл? Мог бы просто сверху помыть. Это "лучшая" реставрация, что я видел! Лайк только за упорство и настойчивость!
Здесь бы этого наверняка и хватило
Leave your bike in the backyard for one month and you are ready for a new video...
great looking motor now. good job. thanks for sharing..
thank you very muck
in malaysian, it called HONDA EX5 DREAM/HIGH POWER. 100CC. nice job guys. i'm from malaysian😘
Itu motor tiruan Honda dream produksi china
Longcin 2000
SandBlasting recomended👍👍
you guys gave the bike new life， that was awsome！
thank you very muck
Very Nice Very good...
thank you very muck
2ate no es el único que desmonta es un buen mecánico felicitaciones
Location ??? Outstanding workmanship...
... чё-то я не понял,это двигатель от скутера или от мопеда?!!
It is the same honda cub 50 engine?
So refreshing to see the opposite of the throw away culture of the western world but.......
1. 1st stage of any engine disassembly...........clean the outside of the engine cases!!
2. NEVER split a casing by forcing a screwdriver between them.
3. Lube as you go!!
You can skip first stage , if you are going to rebuild the engine you ALWAYS WASH cases ,and every engine part . I agree with second stage ,but i dissagree with third stage , you don't need to lube anything while you're spilitting cases
Good job guys.
Nice job guy, thanks for the video 🐒🐒
very interesting, nice video!
Very good workmanship, also excellent designed uncomplicated Japanese construction.
Congratulation for you :).
Thank you for the red heart, like :)
Zwlaszcza piaskowanie polowki skrzyni i otwartego cylindra. Pan raczy sobie chyba zartowac
Bei der Arbeit hab ich zwar manchmal gedacht "Warum bitte haut der darauf rum oder macht das so pfuschig?", aber hey, das Teil läuft und wird wahrscheinlich noch lange durch die Gegend knattern und das ist das wichtigste. Ärmel hochgekrempelt und angepackt ist immer noch besser als Portmonaie aufgemacht und neu gekauft.
Vielen Dank für den Kommentar
Muy bien pero los mecánicos sabemos que los discos se arman bañados en aceite
Easier way 30 gallon tote or kids toy bucket. Add 5 parts grease eater and the rest water. Soak for three hours
Nhìn là biết ngay cái xe này đẩy vào đó chưa được quá 10 ngày
buen trabajo muy profesional te felicito.saludos de Perú
good job
No restoration more like a cleaning
Dream II bỏ đi phí, có đồ làm lại phê đấy bạn
thank you
Great job.
Muito bom.
What about new bearings on the crankshaft?
I have replaced the inactive bearings
good restoration video….
Świetna i profesjonalna robota. BRAWO!
vietnamese ??
Did anyone notice that you switched one flat head screw and one round head Philips screw?
Parabéns japonesa muito bom
Eu/21/07/2020
🤝🇧🇷
Travail superbe, vous avez beaucoup de patience et de savoir-faire !
thank you very muck
Sữa lợi để mua mới rẻ hơn
Where was engine oil?😢
Lầm sau làm xài ít keo thôi bn nhé với cạo cho sạch ron nha
I'm assuming you (the mechanic) do not have access to spray can Chemical Solvent Cleaners?
You'd be going through 12 packs of brake clean to remove all of that gunk. Cheaper to use soap and water.
@@GGigabiteM I used only 3 cans to rebuild a Dodge 318 that was worse than that. A true mechanic learns NOT to waste, but to be frugal.
@@JeffreyStrader Down here in the hot and muggy south, brake clean doesn't last but a few dozens of seconds once it leaves the can. If it's used sparingly, it won't do anything at all.
I tore down a 1980 Chevy small block 350 a few days ago and it took 6 large cans of brake clean and a wire brush to get all the crap off of it.
A pressure washer would at least get the mud off
ruclips.net/video/IN5GrnZ3zWo/видео.html
Sao k lắp cái bô vào nổ nghe cho êm . Haha . Mấy ae ở đâu vậy ,e có con xe cũng muốn restoration lại đây
Половина подшипников разебана, валы болтаются как говно в проруби, Ебать он восстанавливатель!!!
What is washing your car with water?
La limpieza muy bien ! El ensamble te puedo decir que te olvidaste de poner la tuerca del embrague y no hace falta pegamento . Te faltó
esmerilar válvulas , brunir cilindro ,cambiar aros y retenes .y la puesta en marcha ! seguro te faltó aceite en el cárter . Porque sin las tapas de regulación de válvulas puestas sería un enchastre ! Ah y te paso la luz de válvulas 0,5 ADM y 10 ESC .
I hope you don't mind me asking but at 22.35 what music were you playing? Nice tune... But very satisfying video to watch, and you make long hours,you can hear that.
Greetings from Holland
Хорошее дело делаете.
Engine and transmission parts in the bathroom - A "guy thing" the world over.
He should of used the dishwasher
Sometimes in the winter I just the kitchen to fix my bike, luckily I had very tolerant parents.....
Молодец Супер!.Так держать!
hay
Cái nuoc tẩy máy là gi vậy a
Cool
Y el aceite donde estaba?
Bơm dầu có vẻ yếu nhi 😁😁
Oil isn't come on camshaft
Ide bagus ada kreaktip
God job nice yar video I'm p
Масло то не залил. Крышки регулировки клапанов открыты и если бы там было масло то брызгало бы в разные стороны. А так перебрал мотор и сразу увалил его.
Если на видео не показал не значит что не заливал
@@Reelssss1337 клапанная крышка открыта и в момент работы мотора на клапана подаётся масло маслонасосом и поверьте ляполо бы в разные стороны. А так нет масла ляпать нечему!
@@ВладиславСеменович-д7к без масла он бы гремел как погремушка
Не вижу смысла доказывать вам что-то.
30:31
Chào anh em Hải Phòng
thank you
Where is engine oil 😢😢😢
Diễn rất hay
ชอบมากขอบคุณครับ
Сборка огонь, Марик жеребецкий отдыхает🤣🤣🤣
Incrível parabéns.
Bhai es Scoty ka full restoration law n
Using spray name
What's the deal with that big chunk missing from the exhaust manifold?
Ở Việt Nam mà củng có chiếc xe bỏ hoang vậy là chuyện phi lý
They are eating dog in backyard 😂
125сс??
97cc.
Nice flip flops lol ☝
In Indonesia its name Honda astrea prima
itumah bukan honda cuk
ต่อไฟ้ยังไงคับ
Việt Nam đúng ko a