got a problem that every time im using my OTA i need to activate both bluetooth and my locaion settings? tested the OTA on other phones both my new and friends and the problem seems to be constant.
Depends on the usage really. We've run XT60's and had "okay" luck. But once a person starts to "Drive hard" they tend to melt. Most of our go fast vehicles, even just for 2s, are on XT90 plugs now.
Not all ESC's offer Motor Rotation as a setting and only offer CCW rotation as "Forward". You can email us directly for more assistance - NorthAmerica@hobbywing.com
Hi... great vids.. I'm wondering what motors your pairing with the Xr10 Pro for 4x4 sct? I'm currrently running a 3660 (4300kv) & considering trying this esc in a Tekno sct410.3? Any ideas? Eric
Hello. Can someone from Hobbywing help answer the question between the 2 different G2S models. One has a frameless fan and one doesn't. I was going to buy the framelss fan one until I realized it might take a specific fan. I don't want to be stuck buying an expensive hobbywing frameless fan. The other G2S model looks like it will accept any 30mm fan. Can someone please elaborate on these differences please
Frameless fan setup is only going to fit the frameless fan replacement. The case is different between the two models, not just the fan. The frameless fan case, does not fit a standard fan. Feel free to email us for further information. NorthAmerica@hobbywing.com
Hello, its xr10pro 160a (first gen) have reversed polarity protection? Because yesterday i put the wrong battery cable and blow the capasitor. Esc seems working fine. Is it just broken capasitor and i have repalce it or i just lucky or my esc doesnt perform normal? Thanks
Sometimes they will be ok with just needing a power cap replaced. Often they suffer more damage, but that usually shows itself right away as a basic operation or function problem.
Nice to hear your take on the program settings. I just used this exact speed control in my latest drift build. Video coming soon!
Is this better than xd10
Charlie, what up? 💪👍😉😎
Great clip , could you run a larger cap on that esc ? I have a spare R1 30g cap and have the same esc as featured .
Aluminium.. . Alooominum 😂
got a problem that every time im using my OTA i need to activate both bluetooth and my locaion settings?
tested the OTA on other phones both my new and friends and the problem seems to be constant.
Gotta watch more of your chan
We agree. ;) Thank you!
I didn't know about the OTA having logging capabilities! Can post a video to demonstrate that?
Coming Soon!
👍
Great video mate whats the part number for the hobbywing optional cap pack
www.hobbywingdirect.com/products/capacitor-bank-negative-polarity-protection?_pos=1&_sid=600c65f46&_ss=r&variant=39656310833267
Hello is it possible to connect it to futaba t10px with live telemetry, if so what is needed
Hello, i have xr10pro g2s elite. If i use xt60 plug. Is it good enough or not capable for xr10pro 160a?because i read xt60 just support 60a continues.
Depends on the usage really. We've run XT60's and had "okay" luck. But once a person starts to "Drive hard" they tend to melt. Most of our go fast vehicles, even just for 2s, are on XT90 plugs now.
Is the brakes better on this than the GS3? I'm wondering why someone would get this over the GS3?
There must be some benefits right?
Hello..any update on a max6 esc refresh with sensored ability?
Nothing official has been posted at this time.
@HOBBYWING Official this sounds very promising
I don’t see the motor rotation my motor is spinning back wards help
Not all ESC's offer Motor Rotation as a setting and only offer CCW rotation as "Forward".
You can email us directly for more assistance - NorthAmerica@hobbywing.com
Hi... great vids.. I'm wondering what motors your pairing with the Xr10 Pro for 4x4 sct?
I'm currrently running a 3660 (4300kv) & considering trying this esc in a Tekno sct410.3?
Any ideas?
Eric
Hello,
Yes we recommend upgrading to the larger power capacitor as added protection for the ESC from the 4pole motor.
Hello. Can someone from Hobbywing help answer the question between the 2 different G2S models. One has a frameless fan and one doesn't. I was going to buy the framelss fan one until I realized it might take a specific fan. I don't want to be stuck buying an expensive hobbywing frameless fan. The other G2S model looks like it will accept any 30mm fan. Can someone please elaborate on these differences please
Frameless fan setup is only going to fit the frameless fan replacement. The case is different between the two models, not just the fan. The frameless fan case, does not fit a standard fan. Feel free to email us for further information. NorthAmerica@hobbywing.com
Hello, its xr10pro 160a (first gen) have reversed polarity protection?
Because yesterday i put the wrong battery cable and blow the capasitor. Esc seems working fine.
Is it just broken capasitor and i have repalce it or i just lucky or my esc doesnt perform normal?
Thanks
Sometimes they will be ok with just needing a power cap replaced. Often they suffer more damage, but that usually shows itself right away as a basic operation or function problem.
It's new why a firmware update, are you feeling your missing something