Longer LK 5 PRO, 3d printing for beginners guide (3d printing for Dummies ) Coffee and Tools ep 262
HTML-код
- Опубликовано: 14 авг 2022
- Product link: amzn.to/49tcibU
Above is an affiliate link which could provide a small commission if purchased.
Today we take a look back at starting up a new 3d printer and what is needed for basic start up and make your first prints. Other topics on this channel also include: wood projects, tools, tool repairs, custom jigs, basic wood shop work, wood tools, 3D printers, RV repairs, car repairs, custom work, lasers, CNC machines
Link for slicer ( Cura ). ultimaker.com/software/ultima...
Link for Thingiverse free downloadable prints for 3d machines: www.thingiverse.com 
Хобби
Nice instructable. Now I need to get that Artillery up and running. 😂
The leveling on the artillery is about the same deal and easy. Just the dumb paper trick is a flawed deal. Works, but not a 100%.
Thanks for this video mate. I have recently got a 3D printer as a gift. Now I feel I may be able to set it up 👍🇦🇺
Makers Muse in Australia ( RUclips ) does a lot with 3d printing, and he's using the same machine the Longer LK 5 Pro that was used here. They are fun machines !
Thank you for that 👍🇦🇺
New discount code now active ! ! !😀
Cool! I wish I had time for a new hobby…. This would be the one to pursue.
Thanx for the lesson bud!!!
They are amazing at times :)
yes!!! been looking forward to this one since you announced it a few weeks ago!
A bit long winded, but trying to think like a newbie :)
ROFLMAO @ Mexican Train gaming night!
In Texas, it's always Mexican train night LOLOL
I like loner I use the lk1 for making 22lr rifles just made a ar15 lower using ESUN PLA+
I like the ESUN PLA+ it does seem to work better.
@@SirToolssame here love that esun, most 3d 2A builds recommend esun pla+
@@fuall6993 I've been using them for about 1year now and agree. Great results over and over again :)
I bought the Longer LK5 Pro and I'm using the PLA filament but I'm having trouble of the first layer breaking away from my project is seems to stick hard do you have any ideas to why it is doing this please
Depending on the project, you might need to add the "raft" to hold the project in place. You said it seems to stick hard. Also the other old issue is sometimes the STL file is bad and causes it in mid way to hit the project. Let's say there is a lot of things that can go sideways on you. Did you download a project from the internet ? Have you run the bench boat before starting any other projects ?
Just curious, does this printer support STL files??
You can use Cura or Prusa for doing the slicer work to Gcode and works great.
@@SirTools wdym the slicer