Thanks for your video! Just to let you know your steps on creating WAN interfaces through DSA have now been added to the official documentation. The docs were originally written using swconfig examples, but these are no longer valid for many routers using DSA. Your video allowed me to convert my own swconfig setup to DSA and I've also gone ahead and broken down the steps in your video into instructions for others in the "Creating additional WAN interfaces" section.
Thank you for the information. I also made a new version of mwan3 tutorial for OpenWRT 21.02 and it was working great as usual. ruclips.net/video/phkptBdGScY/видео.html
It is so sad in WRT-1900ACS, they removed the Switch tab by default. I think you may have to activate it manually, anyways it still serve my purpose without Vlan. Keep up the good video!
openwrt really is an multifunction firmware. its really great. And now i bought an cctv for my home and i want to know if my cctv can be manage from openwrt? this cctv is an wifi cctv so its connect to a network, i already try to acces the ip but it not want to be oppened
@@VanTechCorner im sorry if my english is not good. my cctv is already connect to my lan network, what i want to ask is: is my openwrt can be a cctv server? thanks
Bro làm video hướng dẫn tạo guest lan với mấy firewall rule được ko ạ, up lên 21.02 giao diện interface nó khác nên ko làm giống bản 19.07 được ạ. Cám ơn
Hello sir, pls it´s not clear if vlan should be added under devices menu as a device or under br-lan /configure=> bridge VLAN filtering, as we use to do under version 19.x switch menu. Would u kindly clarify, pls?
@@VanTechCorner so far so good, 5GHz wifi kinda hand sometimes. also can you make a video how to use dscp marking using layer of cake + sqm, using webgui, most of the openwrt forum use scripts, and terminal, i'm not that good tho.
bro cho mình hỏi thiết lập WireguardVPN sử dụng qua mwan3 trên bản này có khác gì không ạ? Mình dùng cách upgrade lên và cài lại các software wireguard nhưng bị lỗi. Check bên mwan3 detail thì báo lỗi interface Wireguard_HK is error (16) and tracking is active.
Cấu hình Wireguard vẫn như cũ, nhưng có thể do việc áp dụng DSA và đổi tên ifname thành device nên gây ra lỗi trên. Hiện tại bản 21 này vẫn chưa thật sự hoàn chỉnh và vẫn còn bug, nếu không thật sự cần bạn có thể quay về 19.07 cho ổn định.
Nice turtorial but how to assign vlan to port? for example lan1 or lan2? seems it's impossible by this method because by default you do not have lan ports on interface tab. You have to add it manualy.
hi vantech, wanna ask opinion. I've found Linksys WRT 1900AC for sale around rm650. IIs it worth the price?It was half of my initial budget for planning to upgrade from stock tplink ac1200 (Msia Unifi). Or do you suggest to go for AC 2600 MU-MIMO since the seller also got this unit. Thanks,
Hi Khairul, IMO, RM650 is expensive to for the Linksys WRT1900AC, either V2 or V1. If you need a good device to play around with OpenWRT and also stock firmware, Asus RT-AC86U is not a bad choice. I found some seller on Shopee and Lazada posted the WRT1900AC used for ~ RM250 (not a really good deal but still okay). However, the budget is with you and it is your decision.
At the momment, DSA support only available for TP-Link TL-WR941ND (ath79). You can learn more about DSA here openwrt.org/docs/guide-user/network/dsa/dsa-mini-tutorial
Hi, did you solve the problem? Do you have any VLAN configuration in the previous version? If it still persists, please share a screenshot of your Network interfaces.
Bạn chỉ cần vào Network - Interfaces, mục Devices - br-lan và bỏ 1 cổng LAN ra. Sau đó sang Tab Interface và tạo 1 interface mới, ở mục device chọn cổng LAN vừa bỏ ra là được.
Hi, the default configuration of WAN and LAN ports are untagged. When configure the VLAN for WAN, the status is now tagged. Further configuration like what you do with the Switch page, you can have a look at this page openwrt.org/docs/guide-user/network/dsa/converting-to-dsa
VTC can you pm me a reference tutorial on how I would tether my 8800l jetpack to my wrt1900acv2 per usb? I’ve went through many of your tutorials but with out success. Any references or assistance is appreciated. Thank you
Hi, is it possible to setup an openwrt router with a cloudflare warp client? I intend to use it as a bridge for all my lan devices, to route all traffic through cloudflare wireguard tunnel. Haven’t seen any tutorials on how to do this, would be great if you can help! Thanks
Cloudflare uses an app to run their VPN client. I think they support Debian, Ubuntu and Cent OS. In other words it could be done but not in Open WRT. The Cloudflare client is open source so someone could port the client to ARM and package it for OpenWRT someday. You can use other VPN services that support Wireguard though. It just won’t have the cool abilities of Warp. If I wanted to do this I would build a small Linux computer to behave as an access point on my network that would run the Warp client onboard. All devices connected to this particular Linux box would automatically be tunneled. You can find tutorials on how to do all of this. If you figure it out maybe you can post a video on RUclips about how you did it. Maybe I should do this! 🤔
@@michaeldina1103 hey, just read your comment. While cloudflare doesn’t (yet) support any routers officially, I’ve seen some tools on github that generates a cloudflare wireguard profile that can be run on a computer. I was just wondering, since openwrt routers support wireguard, if I were to copy the configurations over to the respective fields on the router(such as public key, private key, etc.) it should be able to run, right? I’m not really too experienced in the networking side of things and haven’t got my hands on an openwrt capable router yet, but it would be cool if somebody could try it!
Bản 21.02 này nó quy hoạch cái vụ nhóm port và tạo Vlan y như Mikrotik. Chắc là lập trình viên đam mê Mik mà phải làm bên Openwrt đây mà. Trong Video anh nói khi chạy Vlan 30 bị giảm tốc độ mạng so với bản 19 cái này đáng quan ngại khi nâng cấp quá vì em đang dùng Vlan 35 của Viettel.
Thật ra đây là những khái niệm chuẩn trong Linux, và team OpenWRT đang quay về sử dụng chuẩn này để mọi người dễ hiểu và làm việc hơn đó bạn. Trong video mình sử dụng Mikrotik AC2 vừa quay PPPoE, cân bằng tải đồng thời chạy DHCP server trên VLAN30 nên chắc bị quá tải thôi. Dĩ nhiên là khi chạy VLAN tốc độ sẽ bị giảm thiểu và cần thêm tài nguyên CPU, nhưng mình tin sẽ không chậm như vậy (thật ra trong video nó được 250 Mbps với 50% CPU idle).
Hi Van Tech I appreciate your video about vlan on latest stable openwrt i"m from indonesia and many openwrt enthusiast here change amlogic tv box to openwrt router, The problem is tv boxes only has 1 ethernet port now I have main router (amlogic tv box) running openwrt 21.02 that has only 1 ethernet port, I want to extend physical ethernet with another old openwrt router running openwrt 19.07, the secondary router have switch menu on luci/network, so i can create vlan id 1, 2, 3 etc but i dont know how to setup main router to assign or tagging each vlan id on secondary router could you explain me? Thank you
Hi, maybe you can share the network topology and your devices overview in the FB group and we will see if any folks have any idea about it. From what I know, this TV box has a USB 3.0 port, why don't use buy a USB 3.0 to Gigabit or a cheap USB 2.0 to Ethernet adapter instead. This will help to simplify the who setup.
@@VanTechCorner i use old tv box, still use usb 2.0 so , i think its better when use ethernet port i have fix the problem i reinstall my sdcard then create new interface on my tv box router i just type eth0.10 (renumbering vlan id) on device setup.. i got IP on each interface i think i do too many setup on my tv box so many configuration make some conflict the topology is ethernet tv box router connected to lan 1 secondary router iset untagged to vlan port lan 1 and 2 and set as LAN interface (unmanged), my laptop connect to port lan 2 and success get IP from main router i set tagged on vlan port lan 3, 4, 5 and cpu on each vlan i succes set interface for each vlan from tv box router thank you very much
On your last video I asked you about the EFI version of this build and you did not answer , you make a video of this build and still will not answer nor address what I had asked you .... disappointed in you ,
Hi, I try my best to answer the comment/question but I afraid I can't check all the comments on the channel. If you need futher discussion, please create a group on the FB group and I think our folks will have some idea, or else the openwrt forum is not a bad choice. OpenWRT x86 EFI is something not for beginner (as per the documentation, it is for developers), you can learn how to build it here openwrt.org/docs/guide-developer/uefi-bootable-image
@@VanTechCorner Hello , as I had said previously that Opewrt has already created / built an x86 EFI build and is available in the Stable download section , and to use it as is is fine , My question was about the extending of the partition in order to use the entire partition as you described in a earlier video , so I do not have to build one myself , just use what has already been built , The EFI build has 3 partitions , and I thought you may have already tried this build and have found a way to extend the partition , otherwise the partition would be about 110 MB and not utilize 250GB
I see, unfortunately I don't have a test device that support EFI to try it out. With BIOS, I am able to extend the partition with fdisk and resize2fs. ruclips.net/video/cOLn2H1FZEI/видео.html. You can also find the docs here openwrt.org/docs/guide-user/installation/openwrt_x86. Just my curiosity, are you running OpenWRT on a new x86 system where only EFI is supported?
@@VanTechCorner I am running OpenWRT x86 , but don't require EFI , I have hardware that supports it and just wanted to try it out , I use fdisk and resize2fs that will resize the partition and works fine on a non-EFI build , but the EFI build uses an additional partition for EFI even though the fdisk and resize2fs did resize , it appears that it did not natively include the EFI partition after resizing , possibly running fdisk and resize2fs and choosing the 3rd partition and including it might work , but I was not sure and did not try that , I thought you may have and I would ask you first before messing with it Thank you
Thanks for your video! Just to let you know your steps on creating WAN interfaces through DSA have now been added to the official documentation. The docs were originally written using swconfig examples, but these are no longer valid for many routers using DSA.
Your video allowed me to convert my own swconfig setup to DSA and I've also gone ahead and broken down the steps in your video into instructions for others in the "Creating additional WAN interfaces" section.
Thank you for the information. I also made a new version of mwan3 tutorial for OpenWRT 21.02 and it was working great as usual. ruclips.net/video/phkptBdGScY/видео.html
Great video, saved my day!
I also wondering, how could you tag the VLANs on the WAN interface.
Thanks for sharing the news!
The new OpenWRT interface configuration is a MESS !!
thanks for the video, linksys vlan setup is easier than before
It is so sad in WRT-1900ACS, they removed the Switch tab by default. I think you may have to activate it manually, anyways it still serve my purpose without Vlan. Keep up the good video!
Ô đúng cái mình cần tìm luôn, thanks bạn nhé
8:50 Thanks mate. I just upgraded to 21.02 and spent 2hours trying to set a simple vlan id to have internet 😅.
Thanks, glad that it helped!
"Network / Switch" does not exist
I feel so baited, you didn't even set the modem in bridge mode :/
openwrt really is an multifunction firmware. its really great. And now i bought an cctv for my home and i want to know if my cctv can be manage from openwrt? this cctv is an wifi cctv so its connect to a network, i already try to acces the ip but it not want to be oppened
Hi, do you mean allow the device to be connected to your LAN network but not the internet, is that correct?
@@VanTechCorner im sorry if my english is not good. my cctv is already connect to my lan network, what i want to ask is: is my openwrt can be a cctv server? thanks
Bro làm video hướng dẫn tạo guest lan với mấy firewall rule được ko ạ, up lên 21.02 giao diện interface nó khác nên ko làm giống bản 19.07 được ạ. Cám ơn
Hello sir, pls it´s not clear if vlan should be added under devices menu as a device or under br-lan /configure=> bridge VLAN filtering, as we use to do under version 19.x switch menu. Would u kindly clarify, pls?
Hello I used your tutorial for multiwan with load balancing but now with 21 version the switch config changed! How to make it work!? Any Help!!
i just updated my WRT1900ACS last night :D
Great, how is it doing?
@@VanTechCorner so far so good, 5GHz wifi kinda hand sometimes. also can you make a video how to use dscp marking using layer of cake + sqm, using webgui, most of the openwrt forum use scripts, and terminal, i'm not that good tho.
please review openwrt 22.03 dsa vlan config. im lil bit confuse with that new update :(
bro cho mình hỏi thiết lập WireguardVPN sử dụng qua mwan3 trên bản này có khác gì không ạ? Mình dùng cách upgrade lên và cài lại các software wireguard nhưng bị lỗi. Check bên mwan3 detail thì báo lỗi interface Wireguard_HK is error (16) and tracking is active.
Cấu hình Wireguard vẫn như cũ, nhưng có thể do việc áp dụng DSA và đổi tên ifname thành device nên gây ra lỗi trên. Hiện tại bản 21 này vẫn chưa thật sự hoàn chỉnh và vẫn còn bug, nếu không thật sự cần bạn có thể quay về 19.07 cho ổn định.
Bro dùng mwan3 để định tuyến ip vào wan hoặc vpn à? Mình đang dùng, lúc được lúc không. Ko biết do config sai hay bug nữa.
Mình không dùng VPN, nhưng nếu cần tạo custom routing mình sẽ dùng vpn-policy-routing thay vì mwan3.
Nice turtorial but how to assign vlan to port? for example lan1 or lan2? seems it's impossible by this method because by default you do not have lan ports on interface tab. You have to add it manualy.
So useful. Thanks
hi vantech, wanna ask opinion. I've found Linksys WRT 1900AC for sale around rm650. IIs it worth the price?It was half of my initial budget for planning to upgrade from stock tplink ac1200 (Msia Unifi). Or do you suggest to go for AC 2600 MU-MIMO since the seller also got this unit.
Thanks,
Hi Khairul, IMO, RM650 is expensive to for the Linksys WRT1900AC, either V2 or V1. If you need a good device to play around with OpenWRT and also stock firmware, Asus RT-AC86U is not a bad choice. I found some seller on Shopee and Lazada posted the WRT1900AC used for ~ RM250 (not a really good deal but still okay). However, the budget is with you and it is your decision.
What is DSA feature, my device is also ath79, but switch option is enabled, its a tplink-c6-v2. Not sure if DSA support is there or no.
At the momment, DSA support only available for TP-Link TL-WR941ND (ath79). You can learn more about DSA here openwrt.org/docs/guide-user/network/dsa/dsa-mini-tutorial
hello, sir. Thnks for this tuto. Would u teach how to multiwan the new openwrt 21.02 using vlan tags, pls? Rgds
Hi, after installing openwrt 19.07.8 on my WRT1900AC i don’t get any internet connection, it does show you that there is internet, but nothing opens
Hi, did you solve the problem? Do you have any VLAN configuration in the previous version? If it still persists, please share a screenshot of your Network interfaces.
Is there the same settings in the netgear r7800
Thank you so much!
You're welcome!
hey, nice tutorial! can i use this for my internet which uses VLAN ids for both iptv and internet? (pppoe connection)
Bro hướng dẫn cách chuyển cổng lan thành wan trên bản 21.02 này giúp mình với.
Bạn chỉ cần vào Network - Interfaces, mục Devices - br-lan và bỏ 1 cổng LAN ra. Sau đó sang Tab Interface và tạo 1 interface mới, ở mục device chọn cổng LAN vừa bỏ ra là được.
@@VanTechCorner Thank bro!
Hey man i love your videos! I flashed open wrt to wrt 1900ac but everytime i log into my router it takes me to the oem firmware. I flashed 21.02.0
How do you do tagged and untagged VLANs? That's confusing
Hi, the default configuration of WAN and LAN ports are untagged. When configure the VLAN for WAN, the status is now tagged. Further configuration like what you do with the Switch page, you can have a look at this page openwrt.org/docs/guide-user/network/dsa/converting-to-dsa
@@VanTechCorner thanks for the link
Hello Mr van tech.
In ur opinion, does wrt1900ac v1 or v2 still worth it to get right now?
Planning to get used unit.
Thank you
Yes, I expected that the device will be supported after few major upgrades. If you have a choice, get V2 to have more RAM and better cooling.
@@VanTechCorner thank you sir. Just got myself an used V2 unit for rm280
@@vegshark92 may i know did u get it? Rm280 is good price!
@@mohdzulhazmi5357 yeah. I got it. Work wonders
@@vegshark92 haha i mean where did you buy it at that price? Gimme link bro..thanks
Any chance of a video on how to install and configure SNORT on openwrt (e.g. raspberry pi 4)?
Hi, not promise but I will add this to my list and have a search on it.
@@VanTechCorner Thanks. I appreciate your help and the great openwrt videos.
Hi any chance of a tutorial on setting up banIP in openwrt?
Hi, I will add this to my note and have a check on it.
VTC can you pm me a reference tutorial on how I would tether my 8800l jetpack to my wrt1900acv2 per usb?
I’ve went through many of your tutorials but with out success. Any references or assistance is appreciated. Thank you
Hi, I have a video for USB tethering. You can give a try ruclips.net/video/2WeedwOI_vM/видео.html
Hi, is it possible to setup an openwrt router with a cloudflare warp client? I intend to use it as a bridge for all my lan devices, to route all traffic through cloudflare wireguard tunnel. Haven’t seen any tutorials on how to do this, would be great if you can help! Thanks
Cloudflare uses an app to run their VPN client. I think they support Debian, Ubuntu and Cent OS. In other words it could be done but not in Open WRT. The Cloudflare client is open source so someone could port the client to ARM and package it for OpenWRT someday. You can use other VPN services that support Wireguard though. It just won’t have the cool abilities of Warp. If I wanted to do this I would build a small Linux computer to behave as an access point on my network that would run the Warp client onboard. All devices connected to this particular Linux box would automatically be tunneled. You can find tutorials on how to do all of this. If you figure it out maybe you can post a video on RUclips about how you did it. Maybe I should do this! 🤔
@@michaeldina1103 hey, just read your comment. While cloudflare doesn’t (yet) support any routers officially, I’ve seen some tools on github that generates a cloudflare wireguard profile that can be run on a computer. I was just wondering, since openwrt routers support wireguard, if I were to copy the configurations over to the respective fields on the router(such as public key, private key, etc.) it should be able to run, right? I’m not really too experienced in the networking side of things and haven’t got my hands on an openwrt capable router yet, but it would be cool if somebody could try it!
@@michaeldina1103 there’s a video on it being done on Mikrotrik router here ruclips.net/video/2pFcVRaoscE/видео.html
@@jordiananders4153 Well that’s very cool!
Bản 21.02 này nó quy hoạch cái vụ nhóm port và tạo Vlan y như Mikrotik. Chắc là lập trình viên đam mê Mik mà phải làm bên Openwrt đây mà. Trong Video anh nói khi chạy Vlan 30 bị giảm tốc độ mạng so với bản 19 cái này đáng quan ngại khi nâng cấp quá vì em đang dùng Vlan 35 của Viettel.
Thật ra đây là những khái niệm chuẩn trong Linux, và team OpenWRT đang quay về sử dụng chuẩn này để mọi người dễ hiểu và làm việc hơn đó bạn. Trong video mình sử dụng Mikrotik AC2 vừa quay PPPoE, cân bằng tải đồng thời chạy DHCP server trên VLAN30 nên chắc bị quá tải thôi. Dĩ nhiên là khi chạy VLAN tốc độ sẽ bị giảm thiểu và cần thêm tài nguyên CPU, nhưng mình tin sẽ không chậm như vậy (thật ra trong video nó được 250 Mbps với 50% CPU idle).
@@VanTechCorner cám ơn anh đã giải thích. Em có con WRT32X cũng dòng giống con của anh. Định cài Openwrt vô chơi cho nó máu. Hiện đang dùng con Newifi 3d2 chạy Openwrt làm router chính gánh Wireguard các kiểu rất tốt.
@@minhchanhdo bro có dùng mwan3 để định tuyến ip khi dùng vpn ko?
@@NguyenLong-cv7oc dùng cái này bác
VPN Policy-Based Routing
Multi-CPU DSA not works
Hi, I am really get what is your mean, can you explain. For now, not all targerts (routers) have the new DSA feature.
Hi Van Tech
I appreciate your video about vlan on latest stable openwrt
i"m from indonesia and many openwrt enthusiast here change amlogic tv box to openwrt router,
The problem is tv boxes only has 1 ethernet port
now I have main router (amlogic tv box) running openwrt 21.02 that has only 1 ethernet port,
I want to extend physical ethernet with another old openwrt router running openwrt 19.07,
the secondary router have switch menu on luci/network, so i can create vlan id 1, 2, 3 etc
but i dont know how to setup main router to assign or tagging each vlan id on secondary router
could you explain me?
Thank you
Hi, maybe you can share the network topology and your devices overview in the FB group and we will see if any folks have any idea about it. From what I know, this TV box has a USB 3.0 port, why don't use buy a USB 3.0 to Gigabit or a cheap USB 2.0 to Ethernet adapter instead. This will help to simplify the who setup.
@@VanTechCorner i use old tv box, still use usb 2.0
so , i think its better when use ethernet port
i have fix the problem
i reinstall my sdcard then create new interface on my tv box router
i just type eth0.10 (renumbering vlan id) on device setup.. i got IP on each interface
i think i do too many setup on my tv box so many configuration make some conflict
the topology is ethernet tv box router connected to lan 1 secondary router
iset untagged to vlan port lan 1 and 2 and set as LAN interface (unmanged), my laptop connect to port lan 2 and success get IP from main router
i set tagged on vlan port lan 3, 4, 5 and cpu on each vlan
i succes set interface for each vlan from tv box router
thank you very much
I create video on bahasa indonesia, base on your tutorial
Thanks you very much
ruclips.net/video/8q_Ml2DD4gA/видео.html
I don't have problems maxing download speed 400mbps
Hi Paul, thanks for sharing this information.
On your last video I asked you about the EFI version of this build and you did not answer , you make a video of this build and still will not answer nor address what I had asked you .... disappointed in you ,
Hi, I try my best to answer the comment/question but I afraid I can't check all the comments on the channel. If you need futher discussion, please create a group on the FB group and I think our folks will have some idea, or else the openwrt forum is not a bad choice. OpenWRT x86 EFI is something not for beginner (as per the documentation, it is for developers), you can learn how to build it here openwrt.org/docs/guide-developer/uefi-bootable-image
@@VanTechCorner Hello , as I had said previously that Opewrt has already created / built an x86 EFI build and is available in the Stable download section , and to use it as is is fine ,
My question was about the extending of the partition in order to use the entire partition as you described in a earlier video , so I do not have to build one myself , just use what has already been built ,
The EFI build has 3 partitions , and I thought you may have already tried this build and have found a way to extend the partition , otherwise the partition would be about 110 MB and not utilize 250GB
I see, unfortunately I don't have a test device that support EFI to try it out. With BIOS, I am able to extend the partition with fdisk and resize2fs. ruclips.net/video/cOLn2H1FZEI/видео.html. You can also find the docs here openwrt.org/docs/guide-user/installation/openwrt_x86. Just my curiosity, are you running OpenWRT on a new x86 system where only EFI is supported?
@@VanTechCorner I am running OpenWRT x86 , but don't require EFI , I have hardware that supports it and just wanted to try it out , I use fdisk and resize2fs that will resize the partition and works fine on a non-EFI build , but the EFI build uses an additional partition for EFI
even though the fdisk and resize2fs did resize , it appears that it did not natively include the EFI partition after resizing , possibly running fdisk and resize2fs and choosing the 3rd partition and including it might work , but I was not sure and did not try that , I thought you may have and I would ask you first before messing with it
Thank you