OpenWrt 21.02 DSA Switch config - VLAN and Bridging (english)
HTML-код
- Опубликовано: 5 авг 2024
- 0:00 Introduction
0:30 About DSA in OpenWrt
1:27 configuration example VLAN filtering
8:30 same scenario without VLAN filtering
11:18 example Access Point config
After I made a German video about the new DSA Switch config in OpenWrt I've been meaning to make on in English, too. This is the German version:
• OpenWrt 21.02 DSA Swit...
Eversince OpenWrt released version 21.02 they introduced DSA (Distributed Switch Architecture) which is a breaking change and also gives new possiblities like VLAN Filtering / VLAN aware Bridges. The configuration method and the wording (devices / interfaces) also changed.
I'm showing how Bridges and VLAN can be set up, at first with a VLAN aware bridge and secondly with a dedicated Bridge for each VLAN. The latter is more hassle.
I'm also showing a real life example of an Access Point running OpenWrt 21.02 with a VLAN Filtering Bridge and SSID connected to specific VLANs.
To see if your device will run DSA, watch:
openwrt.org/releases/21.02/no...
I'm showing only few examples, for more look at:
openwrt.org/docs/guide-user/n...
If you're upgrading from Version 19.07 and your devices uses DSA you need to migrate manually. I reinstalled my devices, here a converting guide:
openwrt.org/docs/guide-user/n... 
Наука
There are not so many vids regarding openWrt 21 x vlan x dsa, and you even provide 2 methods + wifi... Amazing!
Also you seem confident and your explanation sounds credible so I'll buy it!
I'm now rebuilding than lan setup on my archer c7 v4 with much more confidence, thanks!
Most of the tutorials in youtube, using the old openwrt architecture of switching. What a treasure.
Well, you understand it and it explain it thoroughly. I am glad you speak one of my languages as I only speak British, Australian, Canadian, American, Southern Fried, some South African, Irish (most) and Welsh (baaaah, baaaaah). I am about to go through this with a GL-AR750S which surprisingly supports VAPs. I am glad you pointed out the AP doesn't need an IP too. OneMarcFifty has a lot of videos but I find your method of explaining it much clearer and to the point. Thank you for your efforts and I subscribed to your channel. I am surprised you don't have more subscriptions. Please do more videos in English too. I don't speak Deutsch or Schwabish even though I lived in Stuttgart in the SI Centrum for a time. Germany is a very nice country even though I can't afford a super cool Unimog!
Thank you for doing the English version. This was more straight forward than pages and pages of some badly written docs. Helped me more in 30 minutes than docs did in days.
Thank you so much! It helped me a lot!
Note - I only have 1 LAN port, and it still works with different VLAN ids.
This video helped me a lot. I made an AP with SSID's in seperate vlans and i was struggling with the bridges ( yeah i was assuming i had make one per vlan) but this video saved me .
Working "setup"now: isp Modem (in bridge mode) > pfsense (firewall router etc) > tplink TL-SG1016DE (switch) > Belkin rt3200 (OpenWrt as AP)
that is a really good tutorial ! Man you could even mix english with german, so watching you we could learn german and other staff :)
such a simple explanation... native english speakers including myself sure talk alot of shit... good jib
Very nice ! Thank you. Keep up the good work man
Very helpful. Thank you.
thanks for the info!
I wish you would provide more content in regards to networking
Thanks a lot :)
keren pak
Thank you.
Thank you for the English version, what devices are you using with your openwrt setup?
Great Video. It would be nice to add a network layout diagram with the vlan and then configuring openwrt. It would give a better picture.
Thanks a ton!
great video thanks. just one question: what is the difference if I include the wan port into the mainbridge together with all my lan ports or if I dont?
As I want this device to act as a switch I want to be able to use every port available. So if you go with a vlan aware bridge you need to also add the so called WAN port to the bridge. You can still could use it in standalone of course but usually this won't make sense.
Hi, still am having issues to setup a TP Link Archer C20 for Vlans would it be possible to give me stap by step walk through to do that!
Could you explain a case where the VLAN is not local?
I have one port from openwrt connected to a access point. But in the access point the I have three wifi networks with different VLAN id
Do you know why open wrt drop the support for many devices?
For example the meraki mr18 and some microtik routers, do you think these will be added in the future or are they gone all together?
Sorry I do not know. I suggest you ask in forum.openwrt.org
Hi sir i have problem in 21.0 ppoe user dailup from same isp fails only one ppoe dailed up .morever i also change mac adress
Servus Junicast, vielleicht kannst du mir helfen - ich habe eine alte 3370 und versuche nun 2 SSID's auf mein WLAN Modul zu bekommen. Die Wlans werden auch angezeigt, aber kommunikation geht dann nicht darüber. Firewall ist auf accept gestellt. Ein WLAN alleine funktioniert, sobald ich eine 2 SSID dazu packe funktioniert es nicht mehr. Bin ein wenig ratlos...
Hi there, at 12:10 you had spoken about tag and untag , can you please explain more about these two option in vlan ?? Thnx
That sounds like a good idea for a new video. Explaining what VLANs do and what problems they solve.
@@junicast_tech thankyou
@@junicast_tech not only that , please explian what is tag and untag and what is diffrent between them . thnx
Thanks, this was very informative and I have a much better understanding now of OpenWRT (I'm a long time DD-WRT user crossing over). However, things are still unclear as to how a (dumb) access point filters a VLAN ID from the ethernet bridge to a wireless device if the source is NOT an OpenWRT based router. So, with your example of a Guest network, if you have a guest network coming from a dedicated router on a backhaul connection to a dumb access point on VLAN ID 10, how do you route that VLAN ID to a guest device on a WLAN?
I'm planning on doing a new video where I get more into detail about how to handle VLAN.
@@junicast_tech Awesome! I’ll look forward to it.
We would appreciate it if you could tell us what is the scenario that you are targeting to do.
When you want different subnets that are seperated from each other VLAN is the way to go. When you have a vlan aware switch configured you can serve all of those subnets in your OpenWrt device.
@@junicast_tech Many thanks.
Could you make a video showing how to turn the WAN port into a regular LAN port? Basically, i would like to use the whole device as a managed switched with the "WAN" port acting as a trunked/tagged switch port running to another device. Specifically, however, i want to turn my FreshTomato router into a managed switch that will use its WAN port as a tagged/trunked switchport connected to my main router running OpenWRT.
What device is it exactly?
@@junicast_tech My Netgear WNDR3400 is running FreshTomato. My Linksys EA3500 is running OpenWRT 21.02.
I want to turn the Netgear/FreshTomato WAN port into a LAN port and then use it to trunk/tag my VLANs toward the Linksys OpenWRT, which is my main router.
I also want the Netgear/FreshTomato to be the Wireless Access Point because the WiFi on the Linksys/OpenWRT was really slow.
After watching your videos about VLANs on OpenWRT, i got my Linksys running just how i wanted it, but when i tried converting my Netgear/FreshTomato into a managed switch AND turning the WAN port into a tagged LAN port, i wasn't sure what i was doing. I can't find anything that explains how to turn the FreshTomato into a managed switch.
OpenWRT has three separate networks/VLANs (Main, Guests, and IOT) with Firewall rules that isolate the IOT network from everything but the Internet.
I tried creating a similar setup on the Netgear/FreshTomato, but i was unsuccessful.
@@spqa2004 So the FreshTomato you want to act as switch? I don't know too much about FreshTomato. I suspect they are not using the new DSA. Either way, you would make a bridge and attach not only the LAN ports but also the WAN port to it. Then all ports are part of one big switch.
Hard to see, can you zoom in when recording the screen?
What kind of screen size do you have? I suggest you switch to 4k resolution, even if your screen is only 1080p, it will improvie quality.
hello sir I am useing Dlink Dir 2680 Ac2600 Ver A1 Openwrt firmware available please hilp me?????????????????????
This device is not supported. Use this list, before buying a device: openwrt.org/toh/views/toh_available_16128
Ok so IF you are a total noob with openWrt after this demo, I would recommend re-apply network/**firewall** rules to Private, othervise you'll get stuck (interface label gets green again).
wo gibt das auf Deutsch
Du kannst die automatische Übersetzung der Untertitel aktivieren.
I would like an explanation of how to install a USB printer on an OpenWRT router.
901nd or cups