This mATX Case is Impressive! Zalman P30
HTML-код
- Опубликовано: 14 дек 2024
- We are very impressed with the build quality of the new mATX Case the Zalman P30! watch this video for our review of the this case and how it was to build in. We built this with mostly Asus Tuf components!
This may still be available over on our ready to ship page! THEY GO QUICK!
www.stincebuil...
PC SPECS:
MicroTUF
CPU: AMD Ryzen 7 7800X3D 4.2 GHz 8-Core Processor
CPU Cooler: Asus TUF Gaming LC II ARGB 67 CFM Liquid CPU Cooler
Motherboard: Asus TUF GAMING B650M-PLUS WIFI Micro ATX AM5 Motherboard
Memory: TEAMGROUP T-Force Delta RGB 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory
Storage: Kingston KC3000 1.024 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
Video Card: Asus TUF GAMING OC GeForce RTX 4070 Ti 12 GB Video Card
Case: Zalman P30 MicroATX Mini Tower Case
Power Supply: Asus TUF Gaming 850G 850 W 80+ Gold Certified Fully Modular ATX Power Supply
OUR WEBSITE - Looking for a quality gaming PC? www.stincebuil...
TUNE: We tune and offer upgrade suggestions for your current PC.
www.stincebuil...
WE BUILD PC'S LIVE - Want to learn or interact live / stince
FOLLOW US on our Socials!
www.x.com/stin...
/ stince
/ stincebuilt
/ stincebuilt
Edited by Travisteez
www.x.com/trav...
/ travisteez
theres no fan hub in the back and how do you control the rgb fans?
you gotta buy a fan hub yourself. If u want ARGB to work it requires a specific type of fan hub
These builds always give me ideas on how I want my all black PC to look in about a year. Awesome build. Awesome video!
Same but after about 6 months of waiting I finally bought everything
can you setting the fan speed or is it fix rpm fans?
Is the fans noisy?
is the fans noisy?
No@@ALI_XDX
I just purchased this case and im concerned that the 2 side fans are not installed as intake but look like they are installed like exhaust fans, how sure are we that those fans are pulling in air to the system toward the back exhaust fan?
They are intake they’re designed to be intake without showing the back bracket
It’s called reverse fan
In conclusion, is this computer case a good one? Are the fans noisy? Or will there be problems with overheating?
Hello, bro pls tell me how did you connect the RGB Fan cuz mind they didn't work ?
so i hope someone here can answer my question but i really want this case not sure if my 3 slot 7900xtx will fit, ore rather suffocate being so close to the psu shroud please help ty
We're you able to control the stock fans on the aura sync?
I want to know to. Do i need to buy a controller? I want this case, and manage the rgb but i dont know.
Yes. They are 3 pin ARGB.
They just aren't PWM. So you can't control speed curves thru software
Hello, bro pls tell me how did you connect the RGB Fan cuz mind they didn't work ?
Are those fans loud? And are the fans 3 pin argb or what?
Yes. They are ARGB, but not PWM.
So 3 pin for ARGB, 3 pin power (fan speeds cannot be controlled by software, so they will constantly run.)
@@Tech-Neekz Ok, thanks!
@kaskiiiii I have the same case. All white build. No complaints. Nice case to build in and looks great.
Hey nice build. I recently bought the same case in white and started my own pc build. Although I have a problem with the argb fans that come pre-installed with the case. I can't seem to understand where to connec the cables and where they go. It would be much appreciated if you explained how to connect these argb fans properly. Thanks in advance!
i have the same doubt did u figure it out!
@@Rapheal_ yup! All you have to do is connect one female connector from one fan to an addr_led connector to your motherboard(addr_led --> asrock, your mb may have a different name). Then connect the male connector from the fan that is connected to the motherboard with the other fans and just daisy chain them! If you need help just ask me!
Hello i have same problem, what about with the splitter that is packed with case, its !!.! and my fan connector is !!! , so will it matter if the 2/3 piss will be connected to splitter or im doing something wrong?
Oldschool Zalman cases were sick af.
Negative air flow? How do you install fans on the bottom? Can’t find this anywhere.
How do I change the rgb on the fans?
you already know?
Hello, bro pls tell me how did you connect the RGB Fan cuz mind they didn't work ?
DID YOU FIND OUT??????
Good to see this build, because the case looked promising. I like how it looks and it seems to be easy to build.
how are the temps compared to atx cases?
It comes down to this or the XPG case
can you put fan on the down floor of gpu?
Would this case be compatible with a vertical GPU mount?
Unfortunatly its not
is that mid-tower ?
Matx mid-tower! If you want a similar designed case, checkout the Montech XR
Bought it yesterday. It's nice that removing panels are mostly tool less except the top filter. And boy it was t h i c c for an mATX case.
Front panel at the side are extremely useful especially this kind of case would be properly placed on the desk, not below it like the old days.
Removing the side and front TG panels are pretty scary as I need to put some strength to the top side of the TG and improper handling might be able to break the glass. But it's pretty thicc glass so I guess it's calculated risk from Zalman to take. But it's pretty unsettling for me.
Putting parts and doing cable management is a breeze thanks to its size. Thermals are pretty nice too with 3 exhaust and 3 intake fans.
Only sad part is if you have multiple 3.5 inch HDD you might be out of luck because there's only one tool less plastic bracket available.
I recently bought the same case in white. However I have a problem with the argb fans that come pre-installed with the case. I can't seem to understand where to connec the cables and where they go. It would be much appreciated if you explained how to connect these argb fans properly. Thanks in advance!
@@yungzer1019Well IIRC they do have 2 ARGB connectors, male and female, but i don't really pay much attention about which goes where. My only concern is the ARGB from one fan conneccted to the other fan (a.k.a. daisy chained)
I used an ARGB fan hub, so I tried to connect the PWM fan connector and ARGB connector there, if the length isn't sufficient, I daisy chained it lol.
Your main concern is connecting the ARGB 5V header (3 pins with an arrow on it). Make sure each arrow are pointed to each other, and if you're only use the 3 bonus fans with no fan hub, make sure to connect one of the female ARGB connector to the motherboard's ARGB header, so does connecting the PWM fan connector to the board.
This is how my cables look, it's pretty messy LOL
drive.google.com/file/d/1Lhu0qLdsIUMV_bPD6XC1pwA1FQ6cK6Zm/
@@ngybrid I figured it out today but thanks for still helping me! Your cables look clean and not messy at all compared to mine.
@@yungzer1019You're welcome! Hope it serves you a long time (at least if the next gen GPUs arent as big as the AC lol)
@@ngybrid Appreciate your kind words! For my new pc build I will use my old GPU till I save some money to buy a new one. Currently using a 7 y.o. 1050 ti, a beast. I am leaning towards the RTX 4060 and maybe the Ti or a 7700XT, but I am not sure. I also hope it lasts me the same time and more as my old pc did!
Can you make a video how to connect the cables from the fans and Rgb. Especially the cables that the case contains. Because I also have this case but my fans don't work and I don't know how to connect them. Thank you in advance!
I also have this case and I’m so confused about it too, please let me know if you find anythung helpful
did you find cuz i'm stuck on this point
@@Zeuuu. Nope, and I can't find a tutorial on RUclips or any platform.
How big is it compared to nzxt h6 flow
I'm building this exact rig. Same cpu/mobo/case, except all white with a 7800xt hellhound.
Same
I love this case, it was so easy to build in
Are the fans daisy chained?
@@RubineSM
Yeah they can be daisy chained, but I haven’t tested their performance because I replaced them
@@BeaKOnYT you replaced the fans? Also do I need to buy a argb hub for the fans to work?
Did you say the case didnt come with enough standoffs for the matx motherboard?
No, he said that they didn't come pre-installed. So there are enough standoffs for matx in the bag, but you need to install them yourself.
Heya, can the fans be daisy chained into one argb port?
yes
@@victorpayumo7791 Hello, bro pls tell me how did you connect the RGB Fan cuz mind they didn't work ?
How to change the colour on fans
Hello, bro pls tell me how did you connect the RGB Fan cuz mind they didn't work ?
@@Zeuuu. I bought a argb controller and daisy chained all of the fans together, it took me some time to figure out but it was pretty easy after
what acts as exhaust fans? seems like everything is intake
top and rear.
@@StinceBuilt isnt it better to have AIO as intake?
@@blacklotusun5168 2 months late here but you never make the top fans intake it's always exhaust
no intake fan?
Side fans are intake 👌
@@StinceBuilt ohh ok thx
@@StinceBuilt are you SURE? because the fans appear to be backwards, how sure they are intakes?
@@TheReflex420I bought it yesterday, It was reverse type fan. Notice the fan blade for the back and the side, it's different.
Those 2 fronts are reverse blade.
+1Sub man! 💯
This case is a fixed mold, same as Darkflash's Moti.
I like your videos 1+ sub.
Thanks!
Could have been great case..BUT - for aquarium style case, Zalman needed to have sidemesh around bottom, like Lian li or Montech does. That allow direct airflow from bottom to GPU. But Zalman preferred visual design without function, that is sad. Temperatures gonna be horrible.
It is mesh all the way thru to the bottom . I even have 2 fans under the mesh set as intake. Looks great too. As the fans are hidden under the mesh.
Which gives me 4 intake, 4 exhaust (aio and rear as exhaust)
Also has a magnetic filter that's the ENTIRE bottom. As well as 2 on the side metal panel.
@@KayakKingdom but airflow with the spacing of stands height, like 15-20mm? area is tiny and carpets can choke that. Thats why Montech nailed it with Sky two, sides do matter.
@@kingie66 who in their right mind puts a PC on carpet?? That's sacrilegious to begin with. 🤦♂️
@@KayakKingdom any audiophile, or just any person preferring to have space on desk.
@@Joe-sx1iu ..my PC and your mama, is just how i like them.
matx? on a german website was it as a "itx case" 🤣🤣🤣 lucky i look a video befor buy it its too big for me 😂 thanks for the video
снизу кульков нет - это приговор
sadly even though the case is beautiful it is only matx so will go with the musetex y6
Literally the same case as the Darkflash Moti