Bro, it's so hard. In real life I'm a high-energy clown. I almost never stop joking and laughing. So, I try to sneak a little in there, for those kind enough to pay attention and stick with the videos. :)
Man I can’t wait to get my P1P next week. You’re very eloquent with your instructions and very thorough leaving any question I would have liked to ask answered. Awesome! Keep up the great work, subscribed.
Easily earned my like today. By FAR the most detailed and perfectly explained setup video. My P1P is arriving tomorrow and I’ll be watching again as I set it up for the first time.
Have I helped you? Help ME continue this channel with some support: Click the "💗THANKS" button, to Tip or Venmo.com/gregg-cerenzio Become a RUclips Member, by clicking "JOIN" Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9 Support me via my Course: 3DRUNDOWN.COM
11:35 i will add that in my case the 2 screws for the holder is in a bag labeled "for spool holder". The one already sitting there is shorted and only 1.
@@3DRundown you deserve more subs just hang in there 3d printing will get famous eventually! My first printer was creality s1 pro i got two weeks ago i really like but i needed speed so i got the p1p since the k1 max is not out yet. With your tutorial i got it set up in 30 mins no issues thanks again
Absolutley the best unboxing plus set up walk through I have ever watched on RUclips . Seriously thinkg about buying this for my first 3d printer and the ease you have completed this it has convinced me. New subscriber in me. Well done
My P1P was delivered today. I already have several other printers, but I still like to follow instructions first, rather than make assumptions on a new printer. So I really appreciate this explanation. Your video is concise, easy to follow and very thorough. I "liked" and subscribed. Thanks!
Thankyou for this video. There are so many rubbish setup videos for this printer that skip steps, don't show locations clearly, contain obnoxious music, or carry on with unnecessary talking. Yours was near perfect (time markers on the video would be nice though!)
Just received my P1P yesterday... preparing to set it up. Watched their quick set-up and now this. THANK YOU! This was excellent and will be running while I set up my printer.
Found my hot-end was not loose in box but nicely in the small box with all the screws and lubes. I also got tons of loose grease packets in addition to the adhesive tube.
Thank you for this video. It’s clear and concise and meticulous. Better than any other instructional video I found. I will be referring to your content from now on for any P1P info!
I just got my P1P and got green filament and my parts were in the nice foam with cutouts like you showed on the older version. :D thanks for the awesome video!
Got my P1P just today, followed your instructions which helped a lot. Thank you very much! P.S. I saw several videos and everyone got white filament, I ordered P1P with "anniversary price" and I got green filament :)
Hey 3D Rundown. Great Video! I wish I had seen it before I started my unboxing and setting up of the P1P. They make a great product but leave out details in their pamphlet. I have issues with the wireless connection between my computer and the P1P. Sent a Helpdesk ticket in a week ago and still not even a word. That does not instill me with confidence. I have ideas of what is the issue but do not want to spend a lot of time 'fixing' something that isn't the issue. If it wasn't for the SD card I would have a $750 paperweight sitting on my desk. As someone literally just getting into the 3d printing world videos like yours are a HUGE help. Not flashy, not highly edited, just straight forward getter done and I need that right now. Thanks again for the great video.
Hi there. Thanks much. Stay calm. 3D Printing can be overwhelming at first. Keep in mind, you aren't printing from your PC Bambu Studio to your Printer. You are uploading to BAMBU servers, then your printer, is downloading from there. Also, replace that stock SD card. It's crap. Check out my course: BAMBURUNDOWN.COM
@@3DRundown I will definitely check out the course, and I already have a new SD card for my files I have created etc. The computer just isn't seeing the printer. Not sure how it all works, but there is no communication without the SD card. It has been two weeks now since contacting Bambu Labs with a help desk ticket and still nothing, not even an email acknowledging the ticket has been received. If I could give negative marks for customer service they would certainly deserve them. Thank goodness for your YT channel and other YT channels out there like yours.
Excellent, thoughtfully presented, beautifully articulated video. It seems that they took some of your suggestions and incorporated it into the packaging. Spare hot end is now in the small box of components. Many thanks.
Bambu won't communicate with me at ALL, but, I have indeed, seen companies react to my thoughts, which is pretty cool. Creality does it allot. But... they actually speak to me. Maybe one day.... Sigh.... :)
Thank you very much for your precious step by step direction, now I am just looking forward to my printer delivery so I could follow your instructions.
My P1P arrives today! So glad I found your channel while rummaging excitedly through the endless videos of P1P unboxing videos, very entertaining, thorough and concise. Got a sub from me. Time to go binge your other vids lol
im moving to bambu after my 3rd k1 didnt come as it should bed tilted again and real bad binding in prints im excited and cant wait to order my bambu tomorrow after watching this review i defo have my hopes this p1p works right out of the box :)
I prefer my K1 and K1 Max over my Bambu, but, I wish you the best with your Bambu. Lot's of stuff here to help get you going. Be sure to get an AMS to really make the most of it.
I just got my P1P today and followed your instructions, awesome job and thank you so much! I still need to figure out how to turn the light on but other than that I cannot wait to start printing.
This is a very good video and learned all the basics to get started with the P1P 3D Printer. Thanks very much for producing this. I am purchasing my first 3D printer and decided, under advisement from a friend, to purchase this model. It look like this will be an excellent investment. I have liked and subscribed and will be viewing more videos ! Be well and thank you again.
Just got my P1P today!! Excelent tutorial!! That rotating platform seems to be pretty handy... would you recommend it? If so please share the link...!! Thanks and keep up the good work!! Cheers!!
Hey I love your videos man. Just got mine today and tbh I genuinely like how you deliver the content more than anyone else. Hope I keep seeing you 🙂↔️
was having trouble figuring out how to get the filament to first come out, the down arrow instructions were confusing. Problem was I hadn't pushed the filament all the way through. It was curious how it seemed to waste/ let out a bit of filament to start, but I think it was normal to get the filament flowing. The 3d benchy had an odd 75C at first, but later switched to proper temperature. I note some of my bed screws that raise the hot bed up and down have a weird white substance at the bottom, I presume this is normal? was uncertain about the foam at the bottom of the hot bed at first, but then saw later the instruction said to remove it after the initial test. So the instructions could be better, but I'm printing the 3d benchy now, so I think we're good the initial prep before printing takes awhile, but I recognized the ...needle hitting the bed was like the auto loading process
Yep. Strain Sensors use the nozzle to touch the bed. This sets your Z-Height, aka Z-OFFSET. No worry about wasting filament. Get used to it!! Lol. Think of it as USING filament, just for a different purpose. Need that Nozzle primed. The foam thing is weird for sure. I made sure to show that. Yep, it's a PTFE lubricant on screws. When you use the LOAD command, to load filament, it will pull it in, THEN, it will prime it. I start load, then, I hold a light pressure till I feel the filament move.
😂🤣😂 I shoot in a tiny nook of my basement and can barely fit the videography gear, table, and myself in the space. One inch left or right, and the shot is toast. I make lemonade out of lemons, till I hopefully, one day, earn my way into a better space. Till then, nobody move, or the printer get's it.
Excellent video, wish I had found it before my unboxing! I missed the part about leaving the foam in place during setup… there were no *noticeable* consequences. (Hope I didn’t cause a rip in spacetime or initiate a countdown to Armageddon or whatnot.) And wow, this thing really flies.
@@spendmoney303 Don’t worry, this thing is a BEAST. Just be sure to use the glue stick religiously. Other than that, it’s practically foolproof… which is a good thing for me 😀
Hi, great tutorial, thank you very much, when you upgrade the SD card do you have to copy all the files and folders to the new card, or does that happen automatically?
@@3DRundown Thanks for getting back to me, I really appreciate it. I think I'm going to copy the files and folders to the new card, just to be on the safe side, do you think that will be okay?
Note: i got this same package and my hotend nozzle was NOT loose. It was in a pretty package tucked away in the corner. Im sorry to say you got the short end of the stick but it does not seem to be normal practice 👍
Do you have to test the philment every time you want to print something? Or is that just for the set up? Also once you finish your first print and wanna continue.. Do you have to set the printer head back to the end so it can dispose the starting test string thingy? 😅 Sorry im new!
No, I throw everything at these printers!! I am not a calibration kinda guy. I slap it in, and send it!! If there is an issue, THEN, I will deal with it. The K1's and P1's, handle filaments like candy. Not like the old days of constant tinkering. Your Bambu will reset itself, when the next print starts. It's good to keep an eye on things though, and always be in control. YOUR THE BOSS! But, the machine will handle that stuff itself.
nice, im getting mine this week, its my first printer. How do I get my STL files from a Mac book air to the p1p? Do I need to get a USBC adapter to USB drive, or is there a better way?
Have I helped you? Help ME continue this channel with some support: TIP: Click the "💗THANKS" button Become a RUclips Member, by clicking "JOIN" Support my Patreon: patreon.com/3drundown Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Bambu Lab: shrsl.com/46lky Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9 Support me via my Course: 3DRUNDOWN.COM
You did not have to feed the filament that way anymore. You use the feed function, and the hot end will heat up to 250, and then you push done, and you're good to go.
What timing! My P1P was delivered today. Didn't notice the packing screw at the back of the bed which led to some alarming noises. Didn't seem to cause any damage. Just a note for viewers, if this is your first use of Bambu Handy, remember to log in BEFORE trying to bind the printer or you'll get a 401 error.
@@3DRundown but the print head has a cooling fan right? Isn't that auxiliary fan bolted to the frame? It's not going to blow on the nozzle point ? The bed moves up and down so most of the time the fan won't be blowing anywhere near the print head. I thought it might be pointed at the main board so if you enclose the printer the main board doesn't overheat. Oh wait, the bed moves down. The print head stays at the same level. Still if you're just blowing air from the side in a general area it's probably more like a draft which is the opposite of what you want. In an ideal world you want air blasting at the molten plastic to freeze it as fast as possible and then absolutely no air moving at all so the part cools slowly and prevents warping.
I have a question about this printer, can you control everything of this printer on the App for the iPhone? I don’t like the little simple screen of the P1P
I've been running one with, and one without. I have nearly identicle success with both. However, should you want to really push your speeds, or work with some of the more difficult materials, having the fan can help.
It's a P1P... There is only one place on the planet to get it. The Bambu Lab store.... When they decide to approve my affiliate application, (or even respond to ANYTHING) I'll link to it.
THIS is how a setup instruction video is done! EXCELLENT clarity... with a dab of dry humor!
Bro, it's so hard. In real life I'm a high-energy clown. I almost never stop joking and laughing. So, I try to sneak a little in there, for those kind enough to pay attention and stick with the videos. :)
Man I can’t wait to get my P1P next week. You’re very eloquent with your instructions and very thorough leaving any question I would have liked to ask answered. Awesome! Keep up the great work, subscribed.
How are you enjoying it?
@@Blissed42 wish I bought it sooner instead of using creality cheap printers thinking I’d mod my printers to eventually print like this machine does.
Easily earned my like today. By FAR the most detailed and perfectly explained setup video. My P1P is arriving tomorrow and I’ll be watching again as I set it up for the first time.
awesome. I'll see you then!! PSA: Get a hightemp smooth bed for it
Have I helped you? Help ME continue this channel with some support:
Click the "💗THANKS" button, to Tip or Venmo.com/gregg-cerenzio
Become a RUclips Member, by clicking "JOIN"
Use my Affiliate Links when Shopping:
Amazon Link: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Support me via my Course: 3DRUNDOWN.COM
Join this channel to get access to perks, such as priority message replies:
ruclips.net/channel/UCbUb8QjvZiimB-8sN6oDl9Qjoin
11:35 i will add that in my case the 2 screws for the holder is in a bag labeled "for spool holder". The one already sitting there is shorted and only 1.
I suspect mine was also. I'm surprised I didn't show that. I may have edited that out by mistake.
Newbie 3d print guy here i gotta say you give the best intstructions on youtube. Just got my p1p today and followed your tutorial. Thank you
Thanks so much! Hit up my Bambu Studio playlist. 🤜🏼🤛🏼
@@3DRundown you deserve more subs just hang in there 3d printing will get famous eventually! My first printer was creality s1 pro i got two weeks ago i really like but i needed speed so i got the p1p since the k1 max is not out yet. With your tutorial i got it set up in 30 mins no issues thanks again
Absolutley the best unboxing plus set up walk through I have ever watched on RUclips . Seriously thinkg about buying this for my first 3d printer and the ease you have completed this it has convinced me. New subscriber in me. Well done
Consider the P1S. However the P1P will serve you well. I use 2 everyday. Order a High Temp Smooth Plate with it
Thanks!
Thanks for the Super Thanks!!
My P1P was delivered today. I already have several other printers, but I still like to follow instructions first, rather than make assumptions on a new printer. So I really appreciate this explanation. Your video is concise, easy to follow and very thorough. I "liked" and subscribed. Thanks!
It's nice not having to guess. 🤜🏼🤛🏼
The Card I use for all my Printers: Sandisk 32GB High Edurance Micro SD Card: amzn.to/3BIx1sJ
Thankyou for this video. There are so many rubbish setup videos for this printer that skip steps, don't show locations clearly, contain obnoxious music, or carry on with unnecessary talking. Yours was near perfect (time markers on the video would be nice though!)
I have to agree with your comment. Very thorough and very much appreciated for it.
or you could just read the easy instructions
@@modelrailwaynoobsome ppl can’t read
@@kitcat-sonicstyle242 Can't or too lazy?
Wow. Amazing. Best setup instruction video for the Bambu P1P anywhere. Love it. I have two Bambu P1P's. Incredible 3D printer
Thanks so much. I put allot of time into this. Appreciate the kind words. 🤜🏼🤛🏼 This is #2 for me as well
Just received my P1P yesterday... preparing to set it up. Watched their quick set-up and now this. THANK YOU! This was excellent and will be running while I set up my printer.
Found my hot-end was not loose in box but nicely in the small box with all the screws and lubes. I also got tons of loose grease packets in addition to the adhesive tube.
Great instructional video! Just got my P1P today and this was so helpful! Cheers!
Awesome tutorial! I just got a p1p a few days ago and this was the video I watched while setting it up!
🔥🔥🔥 AMS Next!
Simple step by step first print, good job 👍
Thank you so much for this video. My printer is now up and running. Much appreciated!
Thank you for articulating everything so clearly, made the process easy
Thank you for this video. It’s clear and concise and meticulous. Better than any other instructional video I found. I will be referring to your content from now on for any P1P info!
Thanks so much! Pop into my Bambu Studio videos as well
I just got my P1P and got green filament and my parts were in the nice foam with cutouts like you showed on the older version. :D thanks for the awesome video!
Green: Check! Nice accessory packaging: Nope! (Wonder why!?). Thank YOU and you're very welcome
Great video! Currently printing my Benchy for the first time!
Epic. My P1P is still going strong!
just opened the box and watching this! :D My first 3d print!
That's a serious 1st printer! 🔥🔥
Got my P1P just today, followed your instructions which helped a lot. Thank you very much!
P.S. I saw several videos and everyone got white filament, I ordered P1P with "anniversary price" and I got green filament :)
Green!? Wow. That's a first!
I also got green! But no glue stick
same
Hey 3D Rundown. Great Video! I wish I had seen it before I started my unboxing and setting up of the P1P. They make a great product but leave out details in their pamphlet. I have issues with the wireless connection between my computer and the P1P. Sent a Helpdesk ticket in a week ago and still not even a word. That does not instill me with confidence. I have ideas of what is the issue but do not want to spend a lot of time 'fixing' something that isn't the issue. If it wasn't for the SD card I would have a $750 paperweight sitting on my desk.
As someone literally just getting into the 3d printing world videos like yours are a HUGE help. Not flashy, not highly edited, just straight forward getter done and I need that right now. Thanks again for the great video.
Hi there. Thanks much. Stay calm. 3D Printing can be overwhelming at first. Keep in mind, you aren't printing from your PC Bambu Studio to your Printer. You are uploading to BAMBU servers, then your printer, is downloading from there.
Also, replace that stock SD card. It's crap.
Check out my course: BAMBURUNDOWN.COM
@@3DRundown I will definitely check out the course, and I already have a new SD card for my files I have created etc. The computer just isn't seeing the printer. Not sure how it all works, but there is no communication without the SD card. It has been two weeks now since contacting Bambu Labs with a help desk ticket and still nothing, not even an email acknowledging the ticket has been received. If I could give negative marks for customer service they would certainly deserve them. Thank goodness for your YT channel and other YT channels out there like yours.
Subscribed! Awesome detailed run-through of this printer!
Welcome, friend!
Great video. Looking at buying this printer and your video was extremely informative.
You'll be happy with it.
You made it soooo easy for not to smart guy like me !!! Thank you sooo much !!
Epic. Gotchu friend
Who needs the printer when you have all that awesome packaging?
😂😂 Amiright!??!
Excellent, thoughtfully presented, beautifully articulated video. It seems that they took some of your suggestions and incorporated it into the packaging. Spare hot end is now in the small box of components. Many thanks.
Bambu won't communicate with me at ALL, but, I have indeed, seen companies react to my thoughts, which is pretty cool. Creality does it allot. But... they actually speak to me. Maybe one day.... Sigh.... :)
flawless instructions that speak to my brain 😇 thanku 🤗 wish my teachers at school were this good
Thanks for this detailed video. I followed it through and now I’m 3D printing for the very first time 😬
Welcome to the party!
Hi, thank you so much for this Video. It helped me a lot during my P1P initial setup. Liked and subscribed
Welcome! Catch my Bambu Studio stuff
Thank you very much for your precious step by step direction, now I am just looking forward to my printer delivery so I could follow your instructions.
Awesome. Good luck!! Welcome
Great video. I have just ordered my P1P and your video will be a-great help
Welcome to the Party!
You are seriously such a help. Please, take my sincere thanks 😄🤟
Awesome. Welcome!!
Fantastic walkthrough. Cheers!
Thank you. :)
My P1P arrives today! So glad I found your channel while rummaging excitedly through the endless videos of P1P unboxing videos, very entertaining, thorough and concise. Got a sub from me. Time to go binge your other vids lol
Welcome to the party! Brush up on Bambu Studio
Man, you're just hilarious love the video and your weird precise humor!!
This made my day. 😂😂 Thank you. (do go watch my april fools videos)
Brilliant. Just followed this video and currently doing self testing. Easy to follow and well explained. Thanks.
Welcome to the family!
this is an excellent video showing every step much appreciated. good job!
Thank you. Put allot of work into these. 🙌🏼
Thanks for your time here, very instructional and useful! Might just have to swap my FLSUN delta for one of these!
It's a fun machine. The AMS is a game changer
This WILL be my first 3D printer.
You will love it. DO get a high temp Smooth pei bed
Excellent video! very easy to follow, thank you for this. i'm not a beginner but i would have missed a step!!!
Thank you so much for this! Just got my p1p and followed your video. Subscribed.
Welcome!
ABSOLUTELY AMAZING video. Thank you. Great great job ❤
🙏🏼🙏🏼🙏🏼 Check out all my other Bambu Videos as well
Great video, extremely informative. Getting ready to order my P1P , this definitely helped seal the deal. Thank you sir
Be sure to order a high temp smooth plate, and ditch that PEI bed, day one.
Thank you for the video! I just received my p1p and your helped me a lot
Welcome!! (Please see the Pinned comment)
Thanks for the video. Followed this and got it all up and running
🤜🏼🤛🏼
Thanks for producing this very detailed video. Extremely helpful.
🤜🏼🤛🏼
Just ordered one, thank u
Thank you so much for this! It was extremely helpful and informative
im moving to bambu after my 3rd k1 didnt come as it should bed tilted again and real bad binding in prints im excited and cant wait to order my bambu tomorrow after watching this review i defo have my hopes this p1p works right out of the box :)
I prefer my K1 and K1 Max over my Bambu, but, I wish you the best with your Bambu. Lot's of stuff here to help get you going. Be sure to get an AMS to really make the most of it.
I just got my P1P today and followed your instructions, awesome job and thank you so much! I still need to figure out how to turn the light on but other than that I cannot wait to start printing.
It will turn on when the print starts. Otherwise, there is a menu option at the screen
This is a very good video and learned all the basics to get started with the P1P 3D Printer. Thanks very much for producing this. I am purchasing my first 3D printer and decided, under advisement from a friend, to purchase this model. It look like this will be an excellent investment. I have liked and subscribed and will be viewing more videos ! Be well and thank you again.
Now that is what you call a detailed assembly guide...
Thanks so much. A tedious shoot! 🙌🏼🙌🏼🎉
This video was great!! Thank you for all the details 🤗
Thanks so much, and thanks for being here. You are very welcome
Followed the whole video, really useful stuffs here!
thank you very much for this very helpful video for my first 3d print ever!!
That's a really nice first printer! What a time to be alive.
Thank you very much for this mine arrives this week
Just got my P1P today!! Excelent tutorial!! That rotating platform seems to be pretty handy... would you recommend it? If so please share the link...!! Thanks and keep up the good work!! Cheers!!
It's awesome, but I only use it for shooting. It's Huge and Heavy. I have no idea where to get it, I found it at a garage sale! What a lucky find!
This might be my next printer upgrade after the Ender 3 V3 SE!
The SE is a very nice machine for the $$. A K1 or P1S would be a good addition
Very helpful video. Thank you!
Thank you, I'm currently awaiting my new pp to be delivered and your info will be helpful
Awesome. Welcome to the Family!! Save for an AMS. Best thing ever
@@3DRundown I actually just bought it ,10 minutes ago, ahahahaha
Really enjoyed this unboxing/setup! Thank you for a great video! 👍😎
Welcome! Get your Print on!
Hey I love your videos man. Just got mine today and tbh I genuinely like how you deliver the content more than anyone else. Hope I keep seeing you 🙂↔️
Epic. Welcome to the channel. I'm doing my best to keep it all going. Consider becoming a member, to help keep this boat afloat. 😎
I got my upgraded P1P this week, I'm in the UK. My bits were packed in foam like your original but I didn't get any glue.
Weird. Somebody else got the OG packing AND glue
Amazing tutorial! Looking to buy a new printer and I think you sold me on the P1P.
Incredible tutorial
🙏🏼🙏🏼
Been using and upgrading my Ender 3 since 2018, only just getting issues which I just don't want to deal with haha, just ordered one!
The newer machines are a whole new world. K1, P1, even the V3's are a massive leap forward
great video!!!
was having trouble figuring out how to get the filament to first come out, the down arrow instructions were confusing. Problem was I hadn't pushed the filament all the way through.
It was curious how it seemed to waste/ let out a bit of filament to start, but I think it was normal to get the filament flowing. The 3d benchy had an odd 75C at first, but later switched to proper temperature. I note some of my bed screws that raise the hot bed up and down have a weird white substance at the bottom, I presume this is normal?
was uncertain about the foam at the bottom of the hot bed at first, but then saw later the instruction said to remove it after the initial test. So the instructions could be better, but I'm printing the 3d benchy now, so I think we're good
the initial prep before printing takes awhile, but I recognized the ...needle hitting the bed was like the auto loading process
Yep. Strain Sensors use the nozzle to touch the bed. This sets your Z-Height, aka Z-OFFSET.
No worry about wasting filament. Get used to it!! Lol. Think of it as USING filament, just for a different purpose. Need that Nozzle primed.
The foam thing is weird for sure. I made sure to show that.
Yep, it's a PTFE lubricant on screws.
When you use the LOAD command, to load filament, it will pull it in, THEN, it will prime it. I start load, then, I hold a light pressure till I feel the filament move.
Great review and unboxing thanks 🎉
You’re welcome 😊
The vibes if this video make me feel like the printer won’t see its family again unless I pay the ransom, but besides that super useful info!
😂🤣😂 I shoot in a tiny nook of my basement and can barely fit the videography gear, table, and myself in the space. One inch left or right, and the shot is toast. I make lemonade out of lemons, till I hopefully, one day, earn my way into a better space. Till then, nobody move, or the printer get's it.
Excellent video, wish I had found it before my unboxing! I missed the part about leaving the foam in place during setup… there were no *noticeable* consequences. (Hope I didn’t cause a rip in spacetime or initiate a countdown to Armageddon or whatnot.) And wow, this thing really flies.
F*ck. The Butterfly effect you've initiated in the Multi-Verse will have countless unforeseen Consequences.
i did the same lmao. I just got mine now. Did you have any issues?
@@spendmoney303 Don’t worry, this thing is a BEAST. Just be sure to use the glue stick religiously. Other than that, it’s practically foolproof… which is a good thing for me 😀
Great video.. awesome step by step.. thanks 😊
id love one of these!
Put a little $$ asside, over time, and look for sales. They are a little pricey, but aren't terribly expensive. You'll enjoy it
It was vreey helpful 🎉
I am a fan just for wrestling it out of the box!
😜😜🤣🔥🔥🔥
Do we apply the grease or should it already come with greased rods?
It comes ready to go.
Thanks for sharing. Warm regards from Brazil
Welcome! Greetings from NJ USA
Hi, great tutorial, thank you very much, when you upgrade the SD card do you have to copy all the files and folders to the new card, or does that happen automatically?
You can pop it in blank, and get to work. However, no files will be moved.
@@3DRundown Thanks for getting back to me, I really appreciate it. I think I'm going to copy the files and folders to the new card, just to be on the safe side, do you think that will be okay?
Totally
@@3DRundown okay thank you for your help.
Nice job
Note: i got this same package and my hotend nozzle was NOT loose. It was in a pretty package tucked away in the corner. Im sorry to say you got the short end of the stick but it does not seem to be normal practice 👍
Wow. Interesting.... I wonder what the deal with mine was!? Packing mistake? Story of my life.....
Do you have to test the philment every time you want to print something? Or is that just for the set up?
Also once you finish your first print and wanna continue.. Do you have to set the printer head back to the end so it can dispose the starting test string thingy? 😅 Sorry im new!
No, I throw everything at these printers!! I am not a calibration kinda guy. I slap it in, and send it!! If there is an issue, THEN, I will deal with it. The K1's and P1's, handle filaments like candy. Not like the old days of constant tinkering. Your Bambu will reset itself, when the next print starts. It's good to keep an eye on things though, and always be in control. YOUR THE BOSS! But, the machine will handle that stuff itself.
I love you so much for this video :)
And I love you for being here. Welcome
nice, im getting mine this week, its my first printer. How do I get my STL files from a Mac book air to the p1p? Do I need to get a USBC adapter to USB drive, or is there a better way?
All your printing on Bambu, is done directly from Bambu studio, wirelessly.
Ty sir. Nicely done.
Have I helped you? Help ME continue this channel with some support:
TIP: Click the "💗THANKS" button
Become a RUclips Member, by clicking "JOIN"
Support my Patreon: patreon.com/3drundown
Use my Affiliate Links when Shopping:
Amazon Link: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Support me via my Course: 3DRUNDOWN.COM
You did not have to feed the filament that way anymore. You use the feed function, and the hot end will heat up to 250, and then you push done, and you're good to go.
That works, but, I followed the instruction manual, which still calls for this method. I have to assume peeps watching may be referencing the manual.
Thanks for the tutorial
Very welcome
What timing! My P1P was delivered today. Didn't notice the packing screw at the back of the bed which led to some alarming noises. Didn't seem to cause any damage. Just a note for viewers, if this is your first use of Bambu Handy, remember to log in BEFORE trying to bind the printer or you'll get a 401 error.
Ah yea, those 3 screws are a tad important!! Yea, gonna want to be sure you have an account and log in!
They give you green pla now:)
I got it. No clue what. To do with it. But I got it. 😂
What's the point of the auxiliary fan?
I see lots of videos about installing it but not any info about why you would want it.
Increased cooling allows for shorter minimum layer times, and better overhangs, especially at fast speeds, do to faster layer cooling
@@3DRundown but the print head has a cooling fan right?
Isn't that auxiliary fan bolted to the frame?
It's not going to blow on the nozzle point ?
The bed moves up and down so most of the time the fan won't be blowing anywhere near the print head.
I thought it might be pointed at the main board so if you enclose the printer the main board doesn't overheat.
Oh wait, the bed moves down. The print head stays at the same level.
Still if you're just blowing air from the side in a general area it's probably more like a draft which is the opposite of what you want.
In an ideal world you want air blasting at the molten plastic to freeze it as fast as possible and then absolutely no air moving at all so the part cools slowly and prevents warping.
Could I use a larger card? Instead of 32GB, 128GB? Also great video got mine up and running within an hour
Fat32 is limited to 32gb. I've seen people trying larger cards with allot of failure
Can you replace the display screen with the one that comes with the X-1 Carbon?
No. Hoping at some point they will offer us an upgrade
Silly question, but where did you get the rotating table from? Would love one to put my P1P on. Thanks!
A garage sale! I have no clue what it is, but it's awesome. I suspect is was part of a TV stand
Did u ever find something similar? I am looking for one as well
I have a question about this printer, can you control everything of this printer on the App for the iPhone? I don’t like the little simple screen of the P1P
I haven't touched the screen since I built the printer.
@@3DRundown so, that’s it’s a yes? I’m going to order one this Friday! I can’t wait
Yup! Everything is done via the BAMBU STUDIO or BAMBU HANDY
do you advise to buy the fan or is it not needed?
I've been running one with, and one without. I have nearly identicle success with both. However, should you want to really push your speeds, or work with some of the more difficult materials, having the fan can help.
So many links in the description yet non are for the thing you are unboxing
It's a P1P... There is only one place on the planet to get it. The Bambu Lab store.... When they decide to approve my affiliate application, (or even respond to ANYTHING) I'll link to it.
How do I upload my own STL designs I have them on a USB stick
STL files need to be sliced to GCODE using Bambu Studio.