Apple Beats EP Broken AUX 3.5mm Audio Jack Tip Plug Repair Replacement JoesGE
HTML-код
- Опубликовано: 3 окт 2024
- Link For This Audio Jack Replacement 👉 bit.ly/2McIg0X
Written repair guide 👉 bit.ly/2UKUG7M
You can click the zero calorie link below to send your electronics in for repair:
www.joesge.com...
Steps for this repair:
1. Cut the old aux jack off
2. Unscrew the new aux
3. Put the other end of aux and heat wrap on the cord
4. Cut the cord to expose wire inside
5. Cut off the extra wires that are not needed
6. Tin the wires
7. Solder on the wires to the aux
8. Test the headphones
9. Put the heat wrap over the recently soldered wires
10. Put locktite on the thread of the aux
11. Screw on both ends of the aux together
12. Put 2P-10 in the hole so that the cord doesnt move around.
13. Get back to jamming out
Feel free to reach out to our radical animal friendly support team with any questions your brain has developed during the watching or pre gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)
If you are tired of pre gaming or talking with our radical animal friendly support team, and find yourself pondering the meaning of electronics as a whole, you can ponder them deeper by checking us out on these platforms for social-ish activity:
Snapchat @joesge
Instagram @joesge
Facebook @joesge
-
JoesGE.com is a pretty cool place (depending who you talk to it might be more than pretty cool. But hey, I'm just writing this down so that it says something down here, because that's more professional right?) and if you're still reading along at this point you might as well sit down and grab some popcorn because this is about to trail on about how we are this premiere repair service located in Washington State North of Seattle in basically the "Armpit of the US" near Mt baker (Mt Baker has the world record for most snowfall at 1,140 inches in a season). Even though it can smell bad around here we love the fresh air and being near the post office and in a quiet sleepy mountain town certainly gives us much closer access to Team Turtle and Team Beaver (Watch our "Who, what, when and where is JoesGE?" video if you don't get the reference).
All this to basically say that we are all addicted to coffee and stay in the warehouse for ridiculously long hours in order to keep up with the demands of the youth for these two sided head audio devices and speakers that float when you throw them in the ocean or in your bathtub to test if they actually float. On top of that we do like it when less stuff ends up in landfills so we hoard everything on shelves with wheels so that we pollute less, it just sits in our warehouse loosing molecules slowly over time degrading to become smaller and smaller.
If you are still reading at this point you deserve an award, or a high five, or something because you must either be the most patient person on the planet, or you read blogs frequently. And if the latter is the case, then this whole thing must seem pretty short so lets keep going.
We do some really interesting things here at JoesGE which are frequently documented in our sometimes weekly sometimes never vlogs.
Also, if you are wondering how we keep up with the demands of the people so well, its because 90% of the people that work here are all Russian around getting things done most of the time. Yes, that was a pun, you are welcome. We hope you have a pun filled day, because who couldn't use a few laughs?
Thanks you guys!! I bought the aux tip months ago, just rewatched this vid and my Dr Dre's are BACK!!! A lil crocked but all is well lol
This video would have been a lot better and helpful if the last half and what seems to be the most important part to watch wasn’t cut off at the bottom of your screen. Couldn’t see the assembly of the soldered parts as you were soldering.
Thanks for watching! The video could have been shot a little better, I agree. We will try and fix this for the future, Thanks for your feedback! CH.
Thank you for your reply! I understand trying to shoot a video and do the demonstration all at the same time can be quite difficult.
hi joe,
I'm from Mexico and I have headphones similar to those in your video,
I also had the same problem, very detailed, amazing video
forgive me for my very basic english
Thank you for the video! Is it possible to have advice for buying a precision welder?
We like the hakko solder machine
Worked for me, left right and mic. But the volume buttons don't work anymore. Any advice?
not recommended for the average DIY person. I would test the continuity of each terminal with a meter first to ensure none of the wire strands are touching one another BEFORE testing with your phone. If one strand is shorted, it can short out your phone! Another words, let a pro do this repair. :)
We are always here to help. :)
i have done 2 of these for customers, easy to do once you know which wire goes where.......... and of course the equipment to do it. I used my microscope to see what i was doing.
Awesome Alan. What audio jack do you use for this repair? Did we have an opportunity to provide you parts for your repairs? - Joe
Where do I find the company that can replace the aux jack
Hello, unfortunately, we do not repair this device anymore. We do sell the parts at www.joesge.com though. - Aaron P
Is there a link where I can buy this repair kit
This video would come in handy to people that use Skull Candy earbuds lol FINALLY Got me some Beats. So much better.
Beats are headphones that are designed and sound great.
Hello for beats solo cable controler there are 5 wire / white with copper, green with copper, red and green wire, a schematic or something ?
Hello, thanks for commenting. Please email us at support@joesge.com and we will be able to better help you there. - Aaron P
Hoping to use your service to fix a set of Beats EP with this issue on the jack. Doesn't show them as an option on your list to fix though or an option on your list of what you do not repair. This was my first thought of how to get hold of you. Also would be nice to have even an idea of what it may cost. There is no option to view on the website. A little gunshy to send them off without knowing how much a fix would be.. Any help would be appreciated.
Hello, unfortunately, we do not repair this device anymore. We do sell the parts at www.joesge.com though. - Aaron P
Do you not repair beats ep no more ??
We unfortunately do not anymore.
sweet ill give it a go
did as instructed but volume controls do not work.
One of the wires may be soldered incorrectly or in the wrong order. Also make sure that the wire are not touching any other metal on the jack (especially the large wire that is closest to the tip of the jack. Another issue could be your control talk board is bad.
Can you show diagram please
i forget one cooper
👎
My beats ep only work on one side the right one.
I only broke 1/4 of the jack by mistake and before that it works for like 2 weeks in a row without any problem. Did you think the problem is in the jack? I would not buy the jack and then see it doesn't work anyway after the repair. Sometimes the audio works by moving the cable. If i know that i go ahead to buy a jack and try to repair it. Many thanks if you can answer.
Thanks for the comment. The issue you are describing sounds like a faulty aux jack. This is a common issue with the Beats EP headphones.
If you would like your device repaired by a professional you can fill out a repair form and follow the steps to send in your item. We offer free shipping and diagnostics. Here is a link to the repair form:
www.joesge.com/pages/repair-services
-David P
So gold wire top, then red,,,,,then we don’t see the others. Is this deliberate as you repair things ?
Thanks for watching! This is not intentional and seams there was an editing error on our part. We will fix this and re upload as soon as possible, thank you for pointing it out! CH
i just bought a pair of beats ep for x mas not even a week ago and the rabbit chewed the wire in half,do you guys fix this?and how much?
We can fix it, the coust would be up to $50 for a new wire replacement. This includes shipping both ways, parts and labor, and a 100 day repair warranty. You can fill out our repair form here: JoesGE.com/pages/repair-services
COPPER ..?? Is that ground?
smallest?
So you just solder the wire right onto the gold in between the black spacers on the jack?
Thanks for watching! You would solder the wires on to the back section of the jack that will be covered up when the repair is finished. And yes, there are spots for each wire and you would simply solder the wires on to the metal between the plastic. MD.
Joe's Gaming & Electronics just soldered it they are working great thanks
You are most welcome! Happy to hear they are all fixed up :) MD.
I have the same exact headphones and need help the right side does not work anymore and keeps cutting in and out should I just send them in to you guys?
Hello and thank you for watching JoesGE RUclips. Yes you can ship them to us after filling out the form on our website joesge.com/pages/repair-services
JP
I need help i don’t understand the red and green twisted wire, I’m not sure if that’s a microphone or not and I don’t know where to solder it to
Email support@joesge.com and we will be able to help you more with this issue.
Jackı nerden bulurum bende de var jackı kırildı çope atmak istemiyorum
İşte parçayı nereden satın alabileceğiniz : bit.ly/2McIg0X
-David P
thank you bro ! very good jobe !
Thanks for watching!
What the total cost for you guys to fix the same problem on my beats?
We are more the happy to help you out with this issue. Unfortunately we are unable to quote you on this repair at the moment. If you need a quote you will have to send your device into our repair center. We offer free shipping and free diagnostics. Please visit the link attached to start a repair request. www.joesge.com/pages/repair-services
Do beats ep’s aux cord always break?
They do break often, its a matter of how, when and were.
Ruslan P
Yea they get stuck inside the plugs constantly and snap when trying to get them out very common problem with the EP’s and apple wants $85 to repair when the headphones only cost $70 at target
What are you pumping and what is the beep? I’ve watch this video ten time and still haven’t resolved my situation
We have uploaded an updated version of this video, you can check it out here: ruclips.net/video/gsQTrUVjjgo/видео.html
Totally confused....took mine apart and don't have wires to strip! Just have coloured wires but no inner copper so totally at a loss.
We do offer repair services here: JoesGE.com/pages/repair-services
I need my 6 do you have any suggestions where I can get it fixed
Thanks for watching! If you need an audio jack replaced it would be around $35 including parts, labor and shipping both ways. You can send them in by following the steps on our website here: JoesGE.com/pages/repair-services. CH.
hey, i was wishing to get my dads pair fixed for christmas, how much would it be for you to fix and where are you located
It does depend on the issue, But you can fill out our repair for here: JoesGE.com/pages/repair-services . They will not be completed by Christmas as the process is 1 to 2 weeks, including shipping both ways. We are located in northwestern Washington state. CH
Here's how my jack bent I had mine in and I leaned over and I wire pulled it off the counter and the weight of the phone landed on the jack now I still can hear but now the jack is slanted so now only does this increase the demand for airpods but it brings me here because I don't want to force it back in place myself and I break it for real
Fix it! You’ll end up breaking it if you keep using it.
@@Joesge yeah I don't want to melt anything or tamper with it more to the point where I brake it for real
Does this new aux keep the same audio quality or does it affect it at all?
Thanks for watching! If connected properly, it should work like new! Just be sure to test it before you cover the connections.
Joe's Gaming & Electronics alright thank you
No problem!
god bless you
thx
You are most welcome :) MD.
If only this could be done in the UK shame these headphones has this problem
We do offer services to the UK, though shipping and Customs will add up a bit. If you are interested, our repair form is listed here:
www.headsetsales.co.uk/ is the way to go
What would this repair cost?
Thanks for watching! We can replace the aux jack on a set of Beats EP's for $35 including parts, labor and shipping both ways if you send the headphones in to us by following the steps on our website here: JoesGE.com/pages/repair-services . Matt D.
I mean I just grabbed an aux cord and it works fine
Thanks for watching! Some of the Beats EP's are wired into the headphones, this is for those specific pares. It is nice when you can just switch out the cord though.
Can I ship from America?
We are located in North America. We currently ship out to about 200 countries around the world.
sir tell me which colur wire join 1st 2nd 3rd and 4th i confuse
Thanks for watching! The gold wire goes closest to the jack (Closest to the device that it would be plugged in to) followed by the red wire then the green wire then the red and green wire. MD.
@@Joesge You starts with 4 wires, Gold, Red, Green and mic...…….. it appears that you only soldered 3 in the video
Can you repair my beats ep aux Jack please message me back if you can fix the aux Jack
We are more the happy to help you out with this repair. If you need a quote you will have to send your device into our repair center. We offer free shipping and free diagnostics. Please visit the link attached to start a repair request. www.joesge.com/pages/repair-services
-David P
Hey Joe you need to edit your video. It says nothing about the green wire you just went from to wires and then you skip a wire. Maybe you can add some text on that part cuz you sped through it, yeah I just viewed your video about two more times you have a screw up at the end times it looks like you're jumping pass a step or something. Because all of a sudden you don't have that other wire there's four wires, you don't mention anything about the fourth one I mean obviously the last one would go on the last piece. But it's confusing because you don't show anything about the last two wires, if you actually mention we're all three go then the last one is obviously the last wire left.
Thanks for watching, we will definitely take note of this, thank you for bringing it up! CH
buthow to remove the bit up the top
Thanks for watching! We are not sure what you are referring to, please send an image with a description on what you mean to our support number at 1-360-362-1722.
Not explain the wire....
Thank you for the comment. Please contact email: support@joesge.com for wiring schematics.
-David P
ok boomer