Because the trademark complaint video was deleted, it will be updated again. Added spring dimensions. Purchase link ： 34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1 cults3d.com/en/users/zvc0430/creations
I really love guns and always had an idea about 3D printing a toy one obviously 😂 but I never thought that it was a good idea and thought that it was also impossible till I stumbled across this channel that literally makes 3D printed toy guns and now I'm saving for a 3d printer.
Ender 3 printers (great starter printers) are very cheap [used on eBay; in the United States], being sold for only $75 [which includes shipping!] I'd encourage ya to start with a cheap used Ender 3! As for myself, I boughten 6 brand new printers over the past 3+ years since beginning with 3D printing, I'm no expert but have a little bit of experience and have survived the 'learning curve' as I call it..
That printer looks like its holding really close tolerances ,was the assembly straight out the printer meany after they cooled and Cured ,no finishing or fitting ?
Whats the second part you used after the mag release, cannot find that in the files, the second part use at 00:12 seconds, whats its name in the model file
Hey I love your channel!!! I would like to ask how do you make your models ? where do you get references for each weapon detail? I want to try to do a similar job, but having modeled every detail from scratch myself, that's why I'm asking to find out how I can make a model of every detail in a modeling program))0. And finally, two more questions, what plastic do you use for printing and in what program do you make models for weapon parts? Thank you for your attention, I really want to learn how to make the same models because of my love for weapons)0
@@zvc_3DPrint I believe what he's asking is if you could print a slightly longer barrel with threads on the end and make a cylinder to thread on the longer threaded barrel imitating a suppressor.
Hi. I recently purchased two models from the site you´ve made available. I´d like to know if there´s some assembly manual for that, instead of watchin the video. Thank you. The files are awsome by the way.
@@zvc_3DPrint Could you please tell me the print settings you use for these files? - temperature - speed or any other necessary and interesting information. I don't understand much about 3D printing and that's why I'm enlisting the help of a friend, who doesn't have the same model of printer that you recommend. Thanks
@@zvc_3DPrintwill i get printing orientation or guides to print. I doubt to print whether parts like sheet metal (tigger bar, connector, slide release), how it isnt easy to break when its printed by fdm printer?
@@zvc_3DPrint man please I’m willing to pay pay you 50 dollars, cause look all the people that watched it really want one. some of them don’t have a 3-D printer. Do you know how quickly those with sell!!!!
Hey man, I contacted you on cults about files I never received, and you asked me to resent those e-mails. I didn't receive any response, did you receive those ? Thanks
@@zvc_3DPrint I've sent you another mail to make sure that you have the right mail address. This is about the G17 blowback, the Winchester 1897, and the MP5. So far I still havent receive anything :/ Sorry to insist
You should definitely resell a spring kit. I’m having trouble trying to enjoy the model you worked so hard for. I would have hate to spend the money and time for me not to be able to fully assemble it
@@cloverp._p As they should be. If someone decided to do some illegal things with this particular print and their branding was on it - it would be a horrible look for them.
@@corail53 for sure, it’s just particularly annoying for some game designers and toy gun manufacturers who want to use a glock in their game or product
could i make it fire real live rounds if i change the barrel to a real barrel and the fire pin to a real firing pin , will it work if not what will it need to fire real rounds
Because the trademark complaint video was deleted, it will be updated again. Added spring dimensions.
Purchase link ：
34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
where can i find the spring dimensions? i've printed a couple of these, i love them, but missing springs
Do these springs come in the spring kit you have in the description
Pls get back to Me asap
@@goldenninja2010 only part of the spring in the kit
@@zvc_3DPrint so can I buy the kit and be good or do I need to buy other stuff
Would love to see the following builds,
Mossberg 500 (12 gauge);
Colt Python (357),
Mac 10 (45 acp),
and a 50 bmg (barrett or another)
Way too big to 3d print
nothing is too big to 3d print
And this works great for the Lawgiver MKII kits from Dredd 2014
I really love guns and always had an idea about 3D printing a toy one obviously 😂 but I never thought that it was a good idea and thought that it was also impossible till I stumbled across this channel that literally makes 3D printed toy guns and now I'm saving for a 3d printer.
if you live in the uk please take care uk isnt like usa people get knickers in a twist etc
Ender 3 printers (great starter printers) are very cheap [used on eBay; in the United States], being sold for only $75 [which includes shipping!]
I'd encourage ya to start with a cheap used Ender 3! As for myself, I boughten 6 brand new printers over the past 3+ years since beginning with 3D printing, I'm no expert but have a little bit of experience and have survived the 'learning curve' as I call it..
One Other thing, if you’re not familiar with DefCad, you might wanna google that
Did u got the 3d printer already?
@@Simonyoda123 no. Saved and bought a £1.6K gaming pc. I’m not really interested anymore about 3D printing but will do in the future
RUclips’s rules make complete sense and I love them 😍
Ironically?
glock is really iffy about trademark, it’s not yt rules. jsyk
Are you an npc? Just asking
@@bred2341 if you couldnt tell I was lying.
@@Ekcnheb i apologize. I just noticed on your acc you had another comment like this
I want this for Christmas because I like guns but I can’t own a gun😂
That printer looks like its holding really close tolerances ,was the assembly straight out the printer meany after they cooled and Cured ,no finishing or fitting ?
Need simple polishing
Very cool, close similarity to a real one!
Just to be clear, this is just a toy and can't be fired or easily fitted to fire? ( I just want a toy )
yep can't be fired
Screw you Glock and RUclips!!!. Leave this man alone!!!
😂
Glock has the right to protect their trademark.
hello can i ask? What is the size of the trigger? 3:15 fruits of green and ash color size?, why I'm fail size?
You can take a video of the problems you encountered and send it to me.Also, there is a screenshot of your purchase. zvc0430@gmail.com
Whats the second part you used after the mag release, cannot find that in the files, the second part use at 00:12 seconds, whats its name in the model file
Please send me a screenshot of your purchase. zvc0430@gmail.com
Are they the same dimensions as the real model? If I add a flashlight mount it would be stable?
There will be some tolerances. Not quite the same.
You should sell packs of the hardware.
👏 1:1 awesome job! 🤙
in this model, it is impossible to make an automatic withdrawal of the upper part of the barrel? As it was in the last video
yep this is an assembled model. This model is also available in a blowback version.
Hey I love your channel!!! I would like to ask how do you make your models ? where do you get references for each weapon detail? I want to try to do a similar job, but having modeled every detail from scratch myself, that's why I'm asking to find out how I can make a model of every detail in a modeling program))0. And finally, two more questions, what plastic do you use for printing and in what program do you make models for weapon parts?
Thank you for your attention, I really want to learn how to make the same models because of my love for weapons)0
pla 3dmax
@@zvc_3DPrint hi, where do you get references for gun parts?
is this model printable with an Ender 3 3D printer? If it is, what settings do I need to use for the print?
layer height 0.15 speed 50 fill 40 temperature 190 pla
can you make a video so that the barrel is threaded and have a silencer / compressor for it?
Sorry, what I made was a toy gun. The barrels are solid.
@@zvc_3DPrint I believe what he's asking is if you could print a slightly longer barrel with threads on the end and make a cylinder to thread on the longer threaded barrel imitating a suppressor.
Hi. I recently purchased two models from the site you´ve made available. I´d like to know if there´s some assembly manual for that, instead of watchin the video. Thank you. The files are awsome by the way.
Sorry, there is no assembly manual. Only this video can be referenced. 🙏
@@zvc_3DPrint Could you please tell me the print settings you use for these files?
- temperature
- speed
or any other necessary and interesting information. I don't understand much about 3D printing and that's why I'm enlisting the help of a friend, who doesn't have the same model of printer that you recommend. Thanks
@@joaoulisseslopes6992 Layer height 0.15 speed 60 filling 30-40% temperature 190 pla support 45 degrees 2mm
@@zvc_3DPrint Thank you, again.
@@joaoulisseslopes6992 😉🫱🏻🫲🏼
Will it fire if real bullets are loaded？
no
can i ask more information about this before purchasing?
of course 😉
@@zvc_3DPrintwill i get printing orientation or guides to print. I doubt to print whether parts like sheet metal (tigger bar, connector, slide release), how it isnt easy to break when its printed by fdm printer?
@@3dptoys I'll give you a reference diagram of the printing direction. Printing according to this is very strong and not easily damaged.
@@zvc_3DPrint ok ill get it on cults , thanks
😉
How much would it be for a fully assembled/completed model.
sorry only sell stl file🙏
@@zvc_3DPrint man please I’m willing to pay pay you 50 dollars, cause look all the people that watched it really want one. some of them don’t have a 3-D printer. Do you know how quickly those with sell!!!!
@@CamR704 Sorry I still need more time to make new models 🙏
@@CamR704 i can print u one if u buy it
@@tadejozbic3522 how much?
Does it's blowback or do you have to pull ut
Pull it
Beautiful toys,👌 how I can get this.
cults3d.com/en/users/zvc0430/3d-models
bingdelengku.github.io/
God I wish the firing pin collars on actual glocks were that easy to install.
How can I bought it?
how kind of material did you use?
pla
@zvc_3DPrint can you do a Glock 34 MOS, please 😢❤.
maybe future🙂
@@zvc_3DPrint thanks and continue, i love what you do!
Where can I buy this or the file for the print
whats the diffrence with the old one?
Made some optimizations. Not much difference
So i need to buy new one?@@zvc_3DPrint
Can you make a extended magazine
cults3d.com/en/3d-model/game/glock-17-zvc0430-2
What happened to G17 blowback kit?
Complained by trademark.I'll add the mosaic and reupload 😑
Where can I download these models?
bingdelengku.github.io/
cults3d.com/en/users/zvc0430/3d-models
🙂
Hi, this model is not in your shop, i can only find the other blowback version.
cults3d.com/en/3d-model/game/glock-17-zvc0430-2
@@zvc_3DPrint thanks, i bought the Blowback version. Not easiest thing to print but it looks super cool thanks!
hello, does this model trigger work?
The structure can move, but it doesn't work
Amazing 🤩
Witch settings do i have to use for ender 3 v2
mail me zvc0430@gmail.com
@zvc 3D Print could i pay you to send me a pre assembeled one
sorry 🙏
can you buy some parts instead of buying the whole model
what parts do you want to buy？
@@zvc_3DPrint i`ll need the trigger bar , trigger,control block and slide back cover plate
That would be cool to be able to buy parts
Can u make usp-s please?
what did you blur out?
He got the glock logo copy right
can i use saturn 3 ultra for print?
print size?
@@zvc_3DPrint same as in video
@@scarlet.remilia No problem
@@zvc_3DPrint thank you ^^
Hey man, I contacted you on cults about files I never received, and you asked me to resent those e-mails.
I didn't receive any response, did you receive those ?
Thanks
already to u 🙏
@@zvc_3DPrint I'm sorry but I don't think I received anything ? Did you send me a mail ?
@@Raamad Then I'll send you another one
@@zvc_3DPrint I've sent you another mail to make sure that you have the right mail address.
This is about the G17 blowback, the Winchester 1897, and the MP5.
So far I still havent receive anything :/ Sorry to insist
MAC-10 PLEASE
It was too difficult to find the size of the spring before, so I gave up
😅
You should definitely resell a spring kit. I’m having trouble trying to enjoy the model you worked so hard for. I would have hate to spend the money and time for me not to be able to fully assemble it
Try to make the walther lp53 (airsoft gun) (sean connery 007 gun)
Dimana aku bisa membelinya
bingdelengku.github.io/
How can I bought it? Did U have ebay? Paypal?
bingdelengku.github.io/
cults3d.com/en/users/zvc0430/3d-models
only stl file 🤝
@@zvc_3DPrint 3KS
I wonder if you could use real parts...
no there will be tolerances
Qual valor?
Model Purchase link ：
34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
Me a bit early
So it’s basically a fully „working“ gun, but made out of plastic?😂
It's just a toy model with fully functioning parts that can't shoot real ammunition what u expect
If you put a real bullet on this gun I think it will blow up
Nothing fully working on it - it can't even cycle on it's own.
@@corail53just put a real Glock slide n put a p80 rail n trigger n there u go a workin Glock 17
@@this_is_ARZENit can. It had the metal parts and is called ghost gun.
Why u censored it?
Trademark complaint
@@killpidone oh i see thanks
glock is really iffy about it’s trademark
@@cloverp._p As they should be. If someone decided to do some illegal things with this particular print and their branding was on it - it would be a horrible look for them.
@@corail53 for sure, it’s just particularly annoying for some game designers and toy gun manufacturers who want to use a glock in their game or product
А почему места замылены?
потому что на рукоятке логотип глок.
First
Can you buy your goods?
There is a purchase address in the description area of the video. but only stl files
Gostaria de comprar uma dessa
could i make it fire real live rounds if i change the barrel to a real barrel and the fire pin to a real firing pin , will it work if not what will it need to fire real rounds
This model doesn't work with real gun parts. There are small differences.And it's not recommended for use on real guns. It's dangerous.
Because that doesn't sound shady at all.
@@zvc_3DPrintand illegal in some places
Bruh stress shot is better
Please glock 44
18£ for this?? 💀💀💀💀💀💀💀💀💀
Alguna sabe como comprar una ?
34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1
cults3d.com/en/users/zvc0430/creations
@@zvc_3DPrint podría dejarme washap o telegrand?
STL BRO?
pliss