Duuuuudde, those Commemorative Edition KS0 Pro's all lined up in a row look so f'n sweet. Thanks for the shout-out brotha! (The plate mounted to the side of the shroud kit adds 10gh by the way) I might have to try out that 200 CFM fan! I can't help but want to get a little more out of my KS0 Pro. I've got it up to 345 so far... Might need more airflow down the middle and less cooling directly on the heat sink. I'll probably take the fan off the top because the chip temps are actually too low for me. CAN'T WAIT TO SEE THE FAFO'ING THAT OCCURS WITH ALL THESE GREEN BEAUTIES!!!
I still have a few OG KS0's on OC and KS0 pros. The profitability is on a steady decline as bigger boys Kaspa ASICS are being rolled out. Making just a few cents daily. I won't buy any FOMO miners again. I would rather buy the coins worth and hold it for the same time. My S19 is still better than the KS0. RPM your dedication to mining is unflinching. Keep it up Man.
@@funnyvideos24328 No, I haven't. Using the Kaspa miners to mine other coins Using unmineable. Bagging several altcoins Via unmineable and hopefully that one will explode
I love the fact that you still do content on these small "home" miners even though you have all the big boys as well. Most of your audience can afford/relate to the small miners more than the ones that cost tens of thousands of dollars.. I can't wait to see them all hot rodded!
The barrel plug and pcie connectors always made problems when oc above 300GHS, now I soldered the 2.5mm2 cable directly to the PCB board and using XT60 connector with 60A. No more issue of connector melted or burnt. Beside that I modified bitcoin mining psu 2000W, soldered 6 pcs 2.5mm2 cables of positive and 6 cables of negative to 3 pcs DC step up to get 20 Volt to run 6 units of 340 Ghz KS0pro.
RPM dude that one wild test, i got more 4 KS0 Pro just for testing, i got them up a few days ago OC to only 260Gh using only one external 140mm fan, no other mods and so far with the 4 over 1.1Th at times, i plan to give them away this Christmas as gifts so its just a fun test, all 4 KS0 Pros with CHUMP discount code to my door was $1,516, the fan I always have and the using a L3++ PSU with using custom barrel plugs rated for 180w continuous.
You are going to fry the barrel plugs using Server PSUs because at 12v you hit the 10A limit on the plugs at only 120v. This is why the stock PSUs are 19.5v which don’t hit 10A until 195w. Use 180w or 230w 19.5v PSUs for overclocking.
I've been mining on my KS0 Pros since late November 2023. I have mined enough to nearly ROI at current price if I wasn't hodling it all, so selling them off will be good for my situation.
Love the IceRiver KSO pro I really think KAS mining with making miner options that the regular home miner can have fun with! These are getting harder to find been thinking of picking one up!!
I'm way ahead of you. I have 3 KS0 pro (black ones) and 7 KS0 pro (green ones) all overclocked 3.2TH total hashrate. 5,690 KAS mined so far since feb 27th 2024. I plan to mine for the next 2 years to see how many coins I'll get... wish me luck😅
I was able to drop temps further by doubling up the copper heatsinks one on top of another. thinking of creating something to touch the case so use the whole rig to cool the mostfits
a 3d print for 5 of them and 1 big fan would make more sense then all those small fans if the shrout only send air inside and not on the outside, it should also be more effective some of the kso shrouts do not cover the whole machine, they only cover to fit the removed covers in the free software you can set how much power the powersuply gives maby more easy then to adjust by hashrate, when the machines have very different hashrate even without overclock
@MyLibertyTV is right. I have a 230W,19.5V power brick arriving today for my KS0 Pro. No mods yet, but maybe soon. Drop that thing in a vat of mineral oil and let her rip. Amps x Volts=Watts.
Are you mining Kaspa only with all your KSO pro's or do you have any plans at mining any of the forks like BUGNA or SEDRA? I will try the cooling of the barrel plug when i over clock my machines parts are in the mail!
Panda see if you can use a freight forwarder in the U.S to bring your stuff across to Canada. I use cross border pickups in Toronto. They have great rates and save me a bunch of money on bringing stuff into Canada.
please write down your investment in total and calculate how many kaspa coins you would of bought, then in 6 months calculate witch one made more profits.
Guys i have a question : i just found this model on ali express and i want know if it's good : Hot Selling Iceriver Kas Ks0 Pro 200gh/S 100W Speciale Editie Met Psu. They sell it for 120$ why it's so cheap
Please don't call hardware wallets "cold storage", cold storage means it's never touched the internet. A tangem card is connected to the internet as soon as you tap it on your phone. All hardware wallets are, even airgapped ones.
The tangem software is all open source. So people have verified the NFC technology which is obviously encrypted and standalone which doesn't connect to the internet. Only the Tangem App for syncing blockchains and your coins on the blockchain is the only thing that is being accessed to the internet. A cold wallet is a vault for storing cryptocurrency that is not connected to the internet. On Tangem cards, the private key is generated when the wallet is created and the card is attached to the device using a hardware random number generator. It is then stored on the card, which is fully disconnected from the internet. The private key never leaves the card. The primary purpose of the wallet is to store the private keys securely.
4:13 WHY would you ever use a Veteran Miner cable, to run your KS0 Pro off a 12v psu?? These miners need 19v, which means if you're running 12v you need to push more amps for the same power output. Trying to use a server PSU for these is stupid. JUST USE a Laptop 230w power brick if you're going to overclock. If you're not going to overclock, still don't use this stupid Veteran Miner cable, using it is more of a risk to your machine than anything else even at stock.
Next video: I burned down my basement after overclocking my 10 KSO Pros 🔥🚀 P.S.: How on earth did you manage to loose two KS0 miners during shipping, this is not a coincidence i think 🥲
That’s long term vision. Let’s revisit in 2035 when you finish the 20gpu rig.
Looollll
Drop the 🎤 😂😂😂😂😂😂😂😂
Lmao
Bastards lol
The sarcasm levels are so high! 😂
Duuuuudde, those Commemorative Edition KS0 Pro's all lined up in a row look so f'n sweet. Thanks for the shout-out brotha! (The plate mounted to the side of the shroud kit adds 10gh by the way) I might have to try out that 200 CFM fan! I can't help but want to get a little more out of my KS0 Pro. I've got it up to 345 so far... Might need more airflow down the middle and less cooling directly on the heat sink. I'll probably take the fan off the top because the chip temps are actually too low for me.
CAN'T WAIT TO SEE THE FAFO'ING THAT OCCURS WITH ALL THESE GREEN BEAUTIES!!!
I still have a few OG KS0's on OC and KS0 pros. The profitability is on a steady decline as bigger boys Kaspa ASICS are being rolled out. Making just a few cents daily. I won't buy any FOMO miners again. I would rather buy the coins worth and hold it for the same time. My S19 is still better than the KS0. RPM your dedication to mining is unflinching. Keep it up Man.
Have you tried to solo mine on thr pro
@@funnyvideos24328
No, I haven't. Using the Kaspa miners to mine other coins Using unmineable. Bagging several altcoins Via unmineable and hopefully that one will explode
I love the fact that you still do content on these small "home" miners even though you have all the big boys as well.
Most of your audience can afford/relate to the small miners more than the ones that cost tens of thousands of dollars..
I can't wait to see them all hot rodded!
The barrel plug and pcie connectors always made problems when oc above 300GHS, now I soldered the 2.5mm2 cable directly to the PCB board and using XT60 connector with 60A. No more issue of connector melted or burnt. Beside that I modified bitcoin mining psu 2000W, soldered 6 pcs 2.5mm2 cables of positive and 6 cables of negative to 3 pcs DC step up to get 20 Volt to run 6 units of 340 Ghz KS0pro.
RPM dude that one wild test, i got more 4 KS0 Pro just for testing, i got them up a few days ago OC to only 260Gh using only one external 140mm fan, no other mods and so far with the 4 over 1.1Th at times, i plan to give them away this Christmas as gifts so its just a fun test, all 4 KS0 Pros with CHUMP discount code to my door was $1,516, the fan I always have and the using a L3++ PSU with using custom barrel plugs rated for 180w continuous.
I identify as your brother.
So you are getting 260 gh with no mods just a firmware update that’s it ?
I just started mining in January and Red Panda's channel has helped me with hardware choices. Thanks RP!!
Kas to 10 bucks is truly a possibility now with smart contract.
You are going to fry the barrel plugs using Server PSUs because at 12v you hit the 10A limit on the plugs at only 120v. This is why the stock PSUs are 19.5v which don’t hit 10A until 195w. Use 180w or 230w 19.5v PSUs for overclocking.
This exactly. The problem is amperage ramps up using a 12v psu
pretty much! I have heard others having similar issues and even burning due to using server psu. Its much safer to just stick to barrel chargers.
I've been mining on my KS0 Pros since late November 2023. I have mined enough to nearly ROI at current price if I wasn't hodling it all, so selling them off will be good for my situation.
Wow that is quick.
@@CheekyMiner got them for sub-$400 and solo luck was insane. Well, was insane. Now its a grind just to get over 12 kaspa a day from each. lol
Love the IceRiver KSO pro I really think KAS mining with making miner options that the regular home miner can have fun with! These are getting harder to find been thinking of picking one up!!
It's all fun and games till summer temps kick in.
Which AC power adapter did you purchase from Amazon or what would you recommend spec wise?
I'm way ahead of you. I have 3 KS0 pro (black ones) and 7 KS0 pro (green ones) all overclocked 3.2TH total hashrate. 5,690 KAS mined so far since feb 27th 2024. I plan to mine for the next 2 years to see how many coins I'll get... wish me luck😅
I was able to drop temps further by doubling up the copper heatsinks one on top of another. thinking of creating something to touch the case so use the whole rig to cool the mostfits
Curious, did u use the thermal sticky pad for the Mosfet heatsinks, or did u use thermal glue
Could you de-solder the barrel plug and directly solder the wires? That would solve the barrel heating problem
I had one and I bought 4 of the commemorative also got hit with the $310 tariff if I knew I would have put them on 2 orders.
should have moved the little stock fans from inside the enclosure and mount them to the outside to help air flow
so dope man my dream is to be like Red Panda !! I love to add a KSO to my small mining farm !! sic !!
a 3d print for 5 of them and 1 big fan would make more sense then all those small fans
if the shrout only send air inside and not on the outside, it should also be more effective
some of the kso shrouts do not cover the whole machine, they only cover to fit the removed covers
in the free software you can set how much power the powersuply gives
maby more easy then to adjust by hashrate, when the machines have very different hashrate even without overclock
which is better solo or pool mining?
Thank you RPM your videos got me through covid
sounds like a pretty awesome plan so far, hope it takes off for you.
@MyLibertyTV is right. I have a 230W,19.5V power brick arriving today for my KS0 Pro. No mods yet, but maybe soon. Drop that thing in a vat of mineral oil and let her rip. Amps x Volts=Watts.
Are you mining Kaspa only with all your KSO pro's or do you have any plans at mining any of the forks like BUGNA or SEDRA? I will try the cooling of the barrel plug when i over clock my machines parts are in the mail!
Panda see if you can use a freight forwarder in the U.S to bring your stuff across to Canada. I use cross border pickups in Toronto. They have great rates and save me a bunch of money on bringing stuff into Canada.
Smashed like as soon as u panda spun the fan
since you are going to open them, why dont you mod the barrel plug with 6 pin connector?
i'm just waiting for summer temps. We will see how the cooling works then :d
Great Video, looking forward to seeing how it all turns out
please write down your investment in total and calculate how many kaspa coins you would of bought, then in 6 months calculate witch one made more profits.
Mining to the moon!🚀
Man that is a cool Kaspa setup, just love that color and the little aluminum "K" on the unit themselves. Was that just for you?
Good morning bro Apache here wow 😮
So do you guys use a wallet as opposed to something like Coinbase?
The barrel plug is not rated for that much power. The voltage drop will be great. Better to solder wires to it.
Thanks RPM, great content and interesting setup.
Why use the barrel plug at all?? Why not just solder the wire to the board?
Guys i have a question : i just found this model on ali express and i want know if it's good : Hot Selling Iceriver Kas Ks0 Pro 200gh/S 100W Speciale Editie Met Psu. They sell it for 120$ why it's so cheap
Greatly made video. Thank you so much!
If i had 'ten' and going to oc, i would solder the power to mb, and remove the barreljack
It must have been a pain to get that key ring through the tiny top hole for fan screws.
Hey RPM, Have you noticed no one says HODL anymore ?..... the good old days.
What happen with the winner I see no video/winner for sunday ?
I love it Panda!
Thanks Panda🙂👍👍
Are you using 12v server power for ks0 160gh?
Keep mining Kaspa!!
@RPM How did you reply to that mayor email asking if you were mining crypto? Lol. I have a similar situation in my neck of the woods.
I got 2 ks0 pro the over lock is no working for me they crash every time that I apply any overclock
We need to mod a server psu to output a higher voltage. It can be done!!!!
Hi RPM, if you decide to sell the Iceriver KS3M miner, I am interested in purchasing.
i will love one
Don't click or mail the telegram spammers its click bait. They will Rob you. Thanks for video panda. Nice receiver pro my way plz lol
Changing the thermal paste = mod!? lol I guess I’ve modded all of my rigs 😂
If i can get a good deal on a KS0Pro, i'll OC it, immersion cool it, and post to YT
Good morning
👍
whos going to be the first one to sink a couple of these in immersion cooling liquid?
Korea❤kaspa
you must get sweet deals if you came in under 6k for this project
Please don't call hardware wallets "cold storage", cold storage means it's never touched the internet. A tangem card is connected to the internet as soon as you tap it on your phone. All hardware wallets are, even airgapped ones.
The tangem software is all open source. So people have verified the NFC technology which is obviously encrypted and standalone which doesn't connect to the internet. Only the Tangem App for syncing blockchains and your coins on the blockchain is the only thing that is being accessed to the internet.
A cold wallet is a vault for storing cryptocurrency that is not connected to the internet. On Tangem cards, the private key is generated when the wallet is created and the card is attached to the device using a hardware random number generator. It is then stored on the card, which is fully disconnected from the internet. The private key never leaves the card. The primary purpose of the wallet is to store the private keys securely.
Kaspa to the 🌙. CAD
10 save some for the rest of us. I can’t even find one 😂
You will be rich end of decade.
So Panda bought them all.
Blame Panda. lol
Ok
Cool give away!!! USA I would like one. Please!!
Sorry u hurt ur hashrate by not using the rgb fans. Rgb ftw
I want an asic too🤗I will create a girl mining farm)Its will be few miners just for my future❤
Bye-bye warranty 😂😂😂😂😂
I want one 😁🙏
4:18 send me one please! How do I win?
CryptoManDan
PS new subscriber
@RPM just put it in the freezer lol
I’m pretty sure ya said not to buy these because it’s no longer worth it😂😂😂😂😂😂
4:13 WHY would you ever use a Veteran Miner cable, to run your KS0 Pro off a 12v psu?? These miners need 19v, which means if you're running 12v you need to push more amps for the same power output. Trying to use a server PSU for these is stupid. JUST USE a Laptop 230w power brick if you're going to overclock. If you're not going to overclock, still don't use this stupid Veteran Miner cable, using it is more of a risk to your machine than anything else even at stock.
1 for me please ❤panda
give me one bro
Next video: I burned down my basement after overclocking my 10 KSO Pros 🔥🚀
P.S.: How on earth did you manage to loose two KS0 miners during shipping, this is not a coincidence i think 🥲