Asus ROG G75VW Disassembly, Fan Cleaning, and Thermal Paste Replacement Guide
HTML-код
- Опубликовано: 20 авг 2024
- Utilize this guide to disassemble your Asus ROG G75VW, G75VX laptop, clean the fan, and replace the thermal paste to fix CPU overheating issues.
Buy tools and parts on AMAZON:
Screwdriver Set: hfixt.com/spro
Opening Tool Set: hfixt.com/pryt
Magnetic Mat: hfixt.com/mat
Tweezers: hfixt.com/tzrs
Thermal paste: hfixt.com/past
Thermal pads: hfixt.com/tpad
Global AliExpress:
Screwdriver set: hfixt.com/alis
Opening tool set: hfixt.com/alit
Magnetic Mat: hfixt.com/amat
Tweezers set: hfixt.com/altz
Thermal paste: hfixt.com/alip
Thermal pads: hfixt.com/apad
Useful links
Reassembly Asus ROG G75VW: • Asus ROG G75VW Laptop ...
How to fix laptop overheating: • How to fix laptop over...
The best thermal paste for laptop: • The Best Thermal Paste...
Laptop Cooling Pad Efficiency: • Laptop Cooling Pad Eff...
More DIY repair guides: how-fixit.com
Follow us for more tech tips and tutorials:
Instagram: / howfixit
Facebook: / howfixit
Twitter: / howfixit
DESCRIPTION
Welcome to our comprehensive guide on Asus ROG G75VW laptop maintenance! In this video, we'll walk you through the essential steps for disassembling your Asus ROG G75VW, G75VX laptop, cleaning the fan, and replacing the thermal paste for optimal performance. Whether you're a tech enthusiast or a beginner, if you're tired of your laptop overheating or slowing down, this repair tutorial is your ticket to a faster and cooler laptop experience.
In this tutorial, you'll discover expert tips and tricks to keep your Asus ROG G75VW laptop running smoothly and efficiently. We'll provide step-by-step instructions, visual demonstrations, and recommendations for the best tools to use.
Video Content:
In this comprehensive video, we will cover the following key points:
1. Laptop Disassembly
Learn how to safely take apart your laptop, including opening the case, accessing internal components, and avoiding common pitfalls.
2. Fan Cleaning
Discover the importance of keeping your laptop's fan clean and dust-free. We'll show you how to access the fan and remove accumulated dust, ensuring your laptop runs at optimal temperatures.
3. Thermal Paste Replacement
Improve your laptop's thermal conductivity by replacing the old thermal paste. We'll guide you through the process of applying fresh thermal paste to the CPU and GPU, which can significantly reduce heat buildup.
4. Performance Benefits
Understand the direct impact of these maintenance tasks on your laptop's performance. A cooler laptop means faster processing speeds and longer lifespan.
5. Laptop Reassembly
Once the cleaning and thermal paste replacement are completed, I will guide you through the process of reassembling your laptop, ensuring that all components fit snugly and securely.
Don't miss out on future tech guides and updates. Hit that subscribe button, like this video if you found it helpful, and share it with fellow laptop enthusiasts. Join our community of tech-savvy individuals on HowFixit.
DISCLAIMER
This video intended for general information only. We will not accept any liability for damage or injury caused while following this guide. Any reliance you place on such information is therefore strictly at your own risk.
AFFILIATE PROGRAM
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
#howfixit #fixit #guide #diylaptoprepair #techrepair #doityourself
***ENG: Links to screwdrivers and parts in the description under the video*
***RUS: Ссылки на отвертки и заменяемые детали в описании под видео*
Thank you so much... I had my G75 since 10 years and now it s like a second life...
Me too! 12+ year for me, but thanks to this video, she has risen from the grave!
Still helpful in 2022
great video, very helpful
Thanks a lot, I could never have removed the keyboard on my own, you're a lifesaver
Rather than tilting the bottom half up as shown (to disconnect the cables), it's better to remove the screen at the hinges. Then you can lift the halves apart and have much more working room.
By the way, don't just pull flat cables out -- the connectors have various types of clamps that should be unlatched first. There's a lot of clamping pressure; if you just pull you'll score the cable pads.
Делал сам в параллели с видео. Все получилось. Температура видео в играх упала с 89 до 65 градусов. Мега спасибо!
Great video! One question though - why didn't you repaste all the nodes where the GPU was?
difficulty? Mother of all hard :P
good video but I have question why in the video car you only clean and put paster in middle why you dont clean also around the other chip having the video card
Fuck me better wait till the weekend cause thats going to take forever lmao
OMG!!! i have found my dream laptop for traveling!!! easy to clean and disassemble !!!
Fantástico que trabalho da desmontar esses laptop pena que não fazem mais nessa qualidade
Great video Im sure Im going to get some use out of it I just purchased one, and plan on upgrading a few things like the WiFi card etc. one question though do you have a video or idea of how to pull the back panel on the screen? I cant seem to find anything about it Id appreciate any information anyone may have about it
Idk if you’re still responding, but my laptop (this laptop) finally is making terrible noises. Is a $400 laptop nowadays (2023) just as good as this was?
Thx man now ı can clean my fans on my own
Not sure where else to ask this but, does anyone know how I can replace the left mouse button, or at the very least the plastic switch mechanism beneath it?
Thank you :)
"Repasting" (heat sink compound) is a bad idea. There will be nothing wrong with the "old" paste. Chances are you would get some minute dirt particles in with the new paste (unless you are working in a clean room, with a pristine laptop), and the extra thickness is very bad for heat conduction.
How does one do a hard reset?
Dear due to a maintenance the flat cable of the power button has been damaged.
I am in contact with a supplier to purchase a new flat.
For this I need to inform you if the flat is normal or inverted, in addition to the size of the flat cable.
Could you guide me?
ASUS G75V model.
yeah great video. thx for this. and i watched all your asus g75vw videos aswell. thank you! also like the other guy said. whybdidnt u repast all the nodes when you put fresh thermal paste on the cpu?
what happenes if I only need to remove the bottom cover? is that possible? I need to replace the bottom cover.
I have the same question the others have. Why not put new thermal paste on the other contacts? Was it just a matter of saving time?
+John Weeks I didn't put new thermal paste because the laptop was new, so I could not do this :)
Hola me podrías decir que pila cmos lleva este asus, yo tengo el mismo y me gustaría comprar la pila del BIOS.
Thank you
Nice work mate ❗❗❗
Hi, very good work! I have a question: Is posible to remove the old CPU and to install a new CPU? Thanks :)
Nice video. I have a qestion: How do you clean the fans properly?
Thank you.
Buerebista you can use compressed air or replace them with new ones.... they cost 20$
Buerebista::: just dust them off and buy one of them high pressured Air cans for Laptops
пока он откручивал болты я состарился и поседел)) один кулер лишний лол)))
How to remove graphics card? I must replace mine. Thank you.
Xanthro2 you cant cause its embedded into the morherboard... it is possible but with proper knowledge and equipment... my advice... get a new laptop
+Grafika Brimal
Uhhhh, yes you can, and I already did it... This is not a shitbox "Integrated gpu". Want proof? Go to Ebay, type in nivida 670m and see there OFF THE MOBO for like 100-150$ apop.
Edit: Ebay.
@@Xanthro2 May I ask would you have a video or photo on the process to replace it ? And what is the card you've replaced. Thanks
When i tried taking off the cable (9:00) the black connector thing came off with it. I can't see if that is supposed to happen from the video, it looks like he just nudges the black plastic connector off with the tweezers.
Also, what are the names of those types of cables?
Don't just pull flat cables out -- the connectors have various types of clamps that should be unlatched first. There's a lot of clamping pressure; if you just pull you'll score the cable pads (or worse).
и... обильно смазал всё пастой кпт19... не, конечно лучше, чем ничего... а меж тем, кпт19 не рассчитана на нагруженные термоинтерфейсы...
There are many cats in my house. I opened the cd drive once after never opening it and there was a ball of cat fur on the tray. I totally need to open mine, but I will just go as far as 8:30, blow a lot of air and close. This looks like a nightmare! I bet those copper tubes must be jammed with cat fur though... :( edit: ohh I think they aren't tubes, they are just for heat dispersing? That would be better.
The copper tubes are heat pipes. Mr. Wikipedia can tell you all about them.
Can you do the same for Asus G55vw ? Many Thanks :)
does any one know on what side of the 2 HDD is the Windows OS on???
всё сделал было норм, но после 3 часов игры монитор стал показывать с красными полосами..... помогите, что сделать?
всё сделал, работает!
Size thermopad?
excelente
Well I regret watching this now... After I have seen the amount if dust under the keyboard, now I want to open mine....
ск что бы добратся до охлада нужно раскидать весь ноут,как я люблю свой clevo p170em скинул поддон и и всё на виду,а это какойто мазахизм
Well this i'm not doing myself, seems way to complicated.
My screen won't turn on anymore i need help... it's not even like on voltage, just black : keyboard backlit, all seems working but my screen is just black
haha..i had te same problems 6mnth ago..whn i drop my g55vw on the staircase.. so i need to replace my 3d screen with shitty one that available at my town.. sob...
I ended up breaking the GPU thinking i put to much thermal paste and sold it for 50 bucks to a random guy for parts :'c
I removed tiny little resistors around the GPU core causing it to simply fu** all the computer 🤣
@@mrgamingrafttuto1103 cant it be repaired? some service might able to re-soldering its part from the motherboard if its replaceable..
@@arnoldgerardy5855 it is ! But i wouldn't have risked paying for nothing if the problem wasn't solved afterward, so i gave up.
I recently traded my 5 years old desktop for a decent G551jm and i'm happy with it !
But i am now scared to tear it down for a cleanup even if it would save me some cash. I don't feel secure doing the same error twice
How do i out the things back on minute 9:00
johnny gh you unclip the connector and pull out the cabel
so, by connector do you mean the tiny piece of black plastic that is in the slot to begin with? Is that supposed to stay on the cable? have i screwed something up if it has?
Привет, хотел спросить. Радиатор на ноутбуке Asus g75vw и VX имеет различие?
И ещё, можно ли в VW установить 670 видеокарту с VX?
Насколько помню, различий не было. Видеокарту установить можно, только она должна быть от Asus с соответствующим биосом
В чем проблема разобрать свой ноутбук и посмотреть какая у вас система охлаждения?
Судя по фото, у видеокарт одинаковое расположение отверстий
18:41 - ору :DDDDD
nice heart napkins
I have a question this sounds stupid but where is the CPU?
+Fluffypuff MC CPU ypu can see in 22:52 in upper right corner of motherboard
Is not better u to blow with blowspray
Wait, so the motherboard isn't grey?
So the monitor is black 😅
can upgrade video card?
no
yes you can but you may know that now lol
shit, I need to check those fans I think one died
Yeah one of mine is on the fritz. It's not spinning properly and making a hell of a lot of noise. We're you able to replace yours?
Keep in mind that the fan on the right (as you face the laptop during normal use) is for the GPU, and runs far less than the other one (CPUs). I.e., don't expect the both of them to be running.
привет.сколько стоит в рублях такая процедура?
+boris1062 зависит от региона\города, уровня сервисного центра. Собственно стоимость услуг на российском рынке я не знаю, в киеве такая процедура обойдется порядка 16,5$
спасибо
I'm never going to buy a laptop again. Not worth this amount of hassle.
+Omni Codex Keep in mind, laptops aren't usually meant to be opened...
Philldog I don't see why not. Dust doesn't discriminate...
This was definitely my first and last laptop. It is a nightmare not being able to clean it. The thing isn't even that portable to top it off (my fault choosing such a huge ass screen).
after that cannot start hahahahaha
after watching this, i dare not open mine...
very bad job....
+женя ракевич Exactly. He didn´t even clean the GPU properly, and didn´t repaste other cooler contacts.
a little too much cpu paste I believe roughly around a rice kern...
why you use a brush? you dont know about a pressure air? why only change a thermal paste on video core? you think ram chips dont need this? and what paste you use?dont watch all video but i will be afraid to give you my pc. maybe do somethink else
+Dmitri Tolbin i used brush because it more simple for viewer, not everyone can has compressed air. Thermal paste don't used on VRAM chips, because it won't work in that case, distance is too big. I recommend to use Zalman ZM-STG2.
+How-FixIT use arctic mx-4 paste, in it no electrical condition materials, put more paste and all be ok ;) and pressure air now in all shops, cost 3-5 euro