As already stated: one of the best videos showing a dragline in operation I have seen so far. I often asked myself how a dragline can be used to remove overburden. This video finally solves the mystery. Thank you!
My buddy does it again!! The principal of a dragline is just like scrapers, once the cutting edge (or in this case teeth) hit the dirt it never againstops until dumped at its final destination, just like a scraper!
You get an idea of how big this thing is with the shot with the Dozer behind it. I saw a dragline in operation in FL as a teenager, the drag bucket was so big, you could drive a rock truck into it. The amount of materiel it moved in an 8 hr shift was mind boggling.
And then comes a moment when you realize, that bucket wheel and bucket chain excavators of smaller size easily move double that while using less electrical power...
Ph 4100 electric shovel's will move more dirt it's just cheaper to run the dragline. Got 7 Marion's at the site I work at in qld, Australia. They'll move 120 ton of dirt on a single bucket while the shovel will do about 100. Takes 1 min for the dragline roughly to do each load while the 4100 will load our 797s in half the time. still very hugge and impressive machine, I watched a dragline slide 40m down a ramp in the rain as it was trying to move onto its new bench. Cab nearly crushed into the berm, bet ya the operators nuts would've went in the back of his throat 😂 you know it's a big girl when she makes a leibherr 9800 digger look like a puppy and the body of a dragline alone makes the big shovels look like toys. 3 massive swing motors and massive rollers on the tub. Swings very quick this video don't do it justice. Wish you could posy videos in comment section as I have some good videos sitting on the side rails while it's does its work. Old fitters I used to work with when I was coming up in my time as an apprentice told me in the 80s you'd climb up the boom to the top and do work on it while it's swinging and working still. Be sweaty gig I tell ya but obviously these days you'll never get the chance to experience that.
my old man swung one of these for years here in aus., used to go with him to work on school hols sometimes as a kid.. huge eye opener then, still is now.. pity the machine sits dormant these days, fresh off a multi million $ overhaul, then parked up 5 or 6 yr ago now :/ built back in ~1985 or so
Hi Joel I think there is either 3 or 4 of these 8200 in Australia I also did a lot of maintenance on one of these ours was White with a Red Stripe & was parked up about the time you mention. If you are who I think you are I worked with your dad.
@@OldFella547 My late Father used to make parts to repair these draglines in Australia. I remember as a young boy sometimes going in on a weekend to look in awe at the huge gears and other pieces. This was at Vickers Ruwolt in Richmond, Victoria.
That dragline leaves so much rock behind lol this machine has to stop for the dozer to rip the rock. The other dragline on this location doesn’t need that much help. When cleaning the cut
Another great video. Never seen a dragline video on the channel and have to say this is the BEST perspective of a dragline in operation I’ve ever seen. The sound of him slinging the material is also so well done. Lived in SoCal my Entire life and this aint’ Nowhere close! Where is this?
I go to a pit for work and from the distance all you can see is the tips booms moving like dinosaurs. When you get to the edge and see how deep the pit is and realize how massive the drag links are it puts things into perspective. I wonder if they will ever leave the hole they’ve created.
Thousands left…used in strip mining all over the world. Because of EPA regulations strip mining techniques and regulations have been improved There is a RESURGENCE of the use of these machines
The video does the machine no justice at all. I had some downtime due to blasting and was invited on one of these (although I've got no idea of a model number) for about half and hour while it was working. Everything about them boggles the mind and yet that little glassed in bit on the front right is the operators cab which is smaller than a typical bathroom. Draglines have been getting bigger over the years mainly because they want to increase the depth they can dig to because the miners of old had already taken all the shallow easy to get to seams. It used to bottom out at about 100m but I guess they've increased that. The one I got onto had a crew of 5 to operate it. One operated a bulldozer preparing the ground for the draglines route. Another in a bulldozer was in charge of the power cable feed to the machine. There was an operator and relief operator so the thing never stopped and I can't remember what the last guy did. Back in the day one of these machines took about 2 years to assemble on site but still they were an incredibly efficient tool for removing over burden. That's a new machine at least to me they are using to load the trucks. Used to be the coal seams were ripped with dozers and then massive loaders loaded the trucks. Thanks for the video.
Is 100+ meters close to what a dragline can do economically? Here they have to dig down over 400 meters (1300+ feet) for lignite, but no draglines - they use bucket wheel excavators, and do it in multiple cuts to get down to depth, rather than in one giant bite. The bucketwheel excavators have a crew of three, and some technicians in the mine who work on the whole fleet, so don't really count as crew for a particular one.
Nice wide view to see what they are actually doing. On the Tan side of the screen you can see where they are removing the topsoil and subsoil, a 10-20 foot lift? I assume to place over the top of the dug out pit as part of regular operations. Then the drag line goes the rest of the way down to the coal in one massive trench. It dumps the spoil in the neighboring trench on the Grey side, which I expect is continuously leveled to receive the stripped topsoil? I wonder how much longer the seam is going to last and how big the depression is going to be.
We hit lignite in our subex jobs and the boss would lose his shit. We’d have to chase the seam and dig it all out and replace it with good materiel as it doesn’t mix well with water or compact and would cause us to fail the soil compaction test.
🇧🇴 Fans n1 👀 bolivia increíble esa maquina gigante 💯 puntos el video 📹 amigo saludos desde Sudamérica Santa Cruz bolivia 🇧🇴 👍 excelente pero para la próxima que sea más largo el video y mas toma de esa increíble maquina okey 👏 👏 👏 👏 😁😁👀👀👀👀
I would love to swing one of those for a few hours. It's been many years since I ran a friction crane set up as a dragline. The largest bucket I think was a 3/4 yard or maybe 5/8 the crane was a Bucyrus 22B with about 40 or maybe 50 feet of boom I cannot remember now. I wonder how many cycles it would take with that 22B to fill the bucket we see here to capacity. Thanks
Amazing machine. And shallow coal! Here they have to dig down over 1300 feet for lignite... open pit. That is a lot of grey dirt to move. And no draglines here either, very nice to see some quality footage of one, it's always interesting how differently the same things have to be done in different places. Thank you for the upload! :) Any chance for a long-ish in-cab video with the operator?
80 yards a minute times 60, times 12. But it don't work the whole time. And probably not efficient every sshwinng. 50,000 yards? I worked a road job and we moved 30,000 a day with hoes and trucks.
I’m guessing 75 to 100yrds….I worked around a 84yrd 8250…look up coal mining in Appalachian and you’ll see the job and drag….at the end there’s 12 or 13 d11s all workin the same spot…
You don't realize how massive this thing is till you see the motor grader in the bottom left of the screen at 2:35 and it looks like an ant crawling along.
I'm from S IL and we have a lot of strip pits, love to fish New Athens(River King Mine) the last open pit mine in IL to not be reclaimed, Marissa(Red Barrel) years ago, you'll get busted now, it was open to public until Waste Management bought up a big chunk, Pyramid State park the original park is really old mines, another 19,000 acres of pits was acquired back about 12 years ago.
At first look quite strange that a larger bucket is not used, looks 'microscopic' in relation to the whole machine. On the other hand it likely is totally 'maxed' concerning size
This machine is already a pretty big monstrosity, but Caterpillar manufactures a few bigger models, the largest of which is an 8750 dragline that can scoop up to 152 cubic yards
Caterpillar includes the Marion brand. Marion Power Shovel sold to Dresser, who spun it off again before it was subsequently bought by Bucyrus-Erie in 1997 (they also bought Terex, in 2010). Bucyrus, in turn, was acquired by Cat in 2011. The Cat 8750 is their largest dragline, matching the Bucyrus 8750.
It's just a bucyrus with a cat sticker on it lad don't be fooled. Cat bought it all out. Same with the electric rope shovel's, and even their diggers. Cat 6090 digger is just a o&k rh400 with yellow paint and cat sticker on it
Nice Rigg... Boring job, it'll make you crazy after awhile. You'll get up in the morning or what ever shift you have and go, oh no another day drag after drag. Paycheck $$$ is real good.
It doesn't look like California there, I didn't think they allowed machines like that in California anymore. My guess is a southern state. Pretty green for California.
Я проработал на шагающем драглайне 20лет, всё очень похоже и робота по вскрыше полезного ископаемого и карьер, и даже звук похож. Очень жаль, но росияне всё взорвали, всё забрала война.
Авто/Мото
Great video, I operated a 8750 for 28yrs in Alberta
See it everyday, it’s about 10 miles from my house in Cross Tx.
As already stated: one of the best videos showing a dragline in operation I have seen so far. I often asked myself how a dragline can be used to remove overburden. This video finally solves the mystery. Thank you!
That’s the way they build artificial lakes!!! Interesting!!!
My buddy does it again!! The principal of a dragline is just like scrapers, once the cutting edge (or in this case teeth) hit the dirt it never againstops until dumped at its final destination, just like a scraper!
You get an idea of how big this thing is with the shot with the Dozer behind it. I saw a dragline in operation in FL as a teenager, the drag bucket was so big, you could drive a rock truck into it. The amount of materiel it moved in an 8 hr shift was mind boggling.
And then comes a moment when you realize, that bucket wheel and bucket chain excavators of smaller size easily move double that while using less electrical power...
Ph 4100 electric shovel's will move more dirt it's just cheaper to run the dragline. Got 7 Marion's at the site I work at in qld, Australia. They'll move 120 ton of dirt on a single bucket while the shovel will do about 100. Takes 1 min for the dragline roughly to do each load while the 4100 will load our 797s in half the time. still very hugge and impressive machine, I watched a dragline slide 40m down a ramp in the rain as it was trying to move onto its new bench. Cab nearly crushed into the berm, bet ya the operators nuts would've went in the back of his throat 😂 you know it's a big girl when she makes a leibherr 9800 digger look like a puppy and the body of a dragline alone makes the big shovels look like toys. 3 massive swing motors and massive rollers on the tub. Swings very quick this video don't do it justice. Wish you could posy videos in comment section as I have some good videos sitting on the side rails while it's does its work. Old fitters I used to work with when I was coming up in my time as an apprentice told me in the 80s you'd climb up the boom to the top and do work on it while it's swinging and working still. Be sweaty gig I tell ya but obviously these days you'll never get the chance to experience that.
So awesome. Probably the best video on you tube of a working drag line. Thank you sharing and keep up the great work!
Thank you PushinDirt!!
Beautiful machine and awesome video!
my old man swung one of these for years here in aus., used to go with him to work on school hols sometimes as a kid.. huge eye opener then, still is now.. pity the machine sits dormant these days, fresh off a multi million $ overhaul, then parked up 5 or 6 yr ago now :/ built back in ~1985 or so
Hi Joel I think there is either 3 or 4 of these 8200 in Australia I also did a lot of maintenance on one of these ours was White with a Red Stripe & was parked up about the time you mention.
If you are who I think you are I worked with your dad.
@@OldFella547 My late Father used to make parts to repair these draglines in Australia. I remember as a young boy sometimes going in on a weekend to look in awe at the huge gears and other pieces. This was at Vickers Ruwolt in Richmond, Victoria.
You produce some of the very best videos on YT! Great job 👏
Thank you Gliderider!!
Outstanding video of a legendary machine.
The moans and creaks it makes as it works makes it sound like a living creature!
😮😨
Excellent video of making the Key cut, and main cut. !!! ✅
Awesome video! I had no idea draglines were still in use.
Worked on at a coal mine that had one of those. Thanks for sharing.
Great video. The 8200 is a good machine. Beautiful cream digging there, hardly a rock in sight. Just what a dragline operator dreams of.
That dragline leaves so much rock behind lol this machine has to stop for the dozer to rip the rock. The other dragline on this location doesn’t need that much help. When cleaning the cut
@@tjvega5675 sounds a bit like a "my dragline is better than your dragline"story to me😁
@@tjvega5675what is the other dragline at this mine
Great Video! Keep them Coming...
Another great video.
Never seen a dragline video on the channel and have to say this is the BEST perspective of a dragline in operation I’ve ever seen. The sound of him slinging the material is also so well done.
Lived in SoCal my Entire life and this aint’ Nowhere close! Where is this?
Texas, from the flag on the dragline
so amazing content. Can't wait to see more
Man what a video👍👍👍👍 listen to that ol girl talkin!! Love listening to it work
that is a very calming video
Nice strip ratio and strike length - Marions forever !!!
Nice vid! I like close ups of the bucket in action though!👍☘️
I love the sound it makes.
New subscriber. Brilliant video 💪🏻 🏴
One cannot grasp the enormity of these machines until they are actually on them or next to them
I go to a pit for work and from the distance all you can see is the tips booms moving like dinosaurs. When you get to the edge and see how deep the pit is and realize how massive the drag links are it puts things into perspective. I wonder if they will ever leave the hole they’ve created.
Awesome 👍
It looks and sounds like mining on the Moon or Mars!
Great dragline video. Not many of these monsters left. So sad.
Thousands left…used in strip mining all over the world. Because of EPA regulations strip mining techniques and regulations have been improved
There is a RESURGENCE of the use of these machines
Very cool in the beginning..can’t imagine it 12’s a day…everyday
The video does the machine no justice at all.
I had some downtime due to blasting and was invited on one of these (although I've got no idea of a model number) for about half and hour while it was working.
Everything about them boggles the mind and yet that little glassed in bit on the front right is the operators cab which is smaller than a typical bathroom.
Draglines have been getting bigger over the years mainly because they want to increase the depth they can dig to because the miners of old had already taken all the shallow easy to get to seams. It used to bottom out at about 100m but I guess they've increased that.
The one I got onto had a crew of 5 to operate it.
One operated a bulldozer preparing the ground for the draglines route.
Another in a bulldozer was in charge of the power cable feed to the machine.
There was an operator and relief operator so the thing never stopped and I can't remember what the last guy did.
Back in the day one of these machines took about 2 years to assemble on site but still they were an incredibly efficient tool for removing over burden.
That's a new machine at least to me they are using to load the trucks. Used to be the coal seams were ripped with dozers and then massive loaders loaded the trucks.
Thanks for the video.
Is 100+ meters close to what a dragline can do economically? Here they have to dig down over 400 meters (1300+ feet) for lignite, but no draglines - they use bucket wheel excavators, and do it in multiple cuts to get down to depth, rather than in one giant bite. The bucketwheel excavators have a crew of three, and some technicians in the mine who work on the whole fleet, so don't really count as crew for a particular one.
The 5th guy is probably the Oiler, keeping the machine happy!
Nice wide view to see what they are actually doing. On the Tan side of the screen you can see where they are removing the topsoil and subsoil, a 10-20 foot lift? I assume to place over the top of the dug out pit as part of regular operations. Then the drag line goes the rest of the way down to the coal in one massive trench. It dumps the spoil in the neighboring trench on the Grey side, which I expect is continuously leveled to receive the stripped topsoil? I wonder how much longer the seam is going to last and how big the depression is going to be.
making D10s / D11s look like toys!!!
We hit lignite in our subex jobs and the boss would lose his shit. We’d have to chase the seam and dig it all out and replace it with good materiel as it doesn’t mix well with water or compact and would cause us to fail the soil compaction test.
Did repair work on 7500 rebuilt tub , bucket etc great machine
Walking drag line in action sweet.
🇧🇴 Fans n1 👀 bolivia increíble esa maquina gigante 💯 puntos el video 📹 amigo saludos desde Sudamérica Santa Cruz bolivia 🇧🇴 👍 excelente pero para la próxima que sea más largo el video y mas toma de esa increíble maquina okey 👏 👏 👏 👏 😁😁👀👀👀👀
Excellent!
Ковш размером с бульдозер!❤
Would love to see a walk through on that Bigass Dragline...
Very familiar with That Scene…
I ran a Bucyrus Erie dragline in a coal strip mine in the Last century, actually it was in the Last Millennium !!!
I run a late 70's Manitowoc 4600. 7yd bucket and 140ft boom. That's a baby compared to this!
Is this Model 8200 a Super???
I would love to swing one of those for a few hours. It's been many years since I ran a friction crane set up as a dragline. The largest bucket I think was a 3/4 yard or maybe 5/8 the crane was a Bucyrus 22B with about 40 or maybe 50 feet of boom I cannot remember now. I wonder how many cycles it would take with that 22B to fill the bucket we see here to capacity. Thanks
Amazing machine. And shallow coal! Here they have to dig down over 1300 feet for lignite... open pit. That is a lot of grey dirt to move. And no draglines here either, very nice to see some quality footage of one, it's always interesting how differently the same things have to be done in different places. Thank you for the upload! :) Any chance for a long-ish in-cab video with the operator?
Sad the BE 4250W [Big Muskie] wasn't saved and put back to work, would have done twice the work of this machine.
If there was an econmical advantage to it in the big picture, possible it would still be working.
I'd like to see more of the machines that are at about 6:00 - some kind of a loader and a double trailer hauler.
Wirtgen surface miner looks like.
@@davebrock6618 they use surface miners like that? I thought they just anfo'ed up the coal and scooped it into a truck or train
@@davidanalyst671 some mines use the surface miners because it produces a consistent size material without crushing and other processing downstream.
Jesus Christ, this thing sounds like a bunch off dinosaurs in rage!
It would be awesome to operate this machine!
Great post, great production quality. QUESTION: Is the sound "designed" or actual? And where were the mics? On the drone? Thanks.
That sound is the electric motors whining.
Where is this?
The big reveal at 2:34 reminds me of the scene in The Shining when Wendy discovers what Jack has been writing all this time.
It's singing!!!😮 You can here it!!!! WOW what a monster
Where is this dragline located?
Do they shive cables much?
Is there only one seam of coal where I worked at Curragh coal mine in Qld Australia there was 5 seams of coal
video excelent
I'm curious... How did that Dragline get there in the first place... Did it walk or was it assembled there?
More likely assembly on site do to the size of the machine.
Sometimes they use special trailers,just like in this video ruclips.net/video/Anqc8eSVZIU/видео.html
How big is the Dozer running behind the drag?
the biggest
Hey guys thus maybe a silly question...but is that drag line electric!!!! Or diesel? Because I don't see an electrical cord I don't see any exhaust...
It is electric- the cable is difficult to see but runs out to the left of the machine when looking from the rear
@@dhewitt2514 ok thank you sir...
That was in Texas I presume.. 🤷🏻♂️😎
How many yards in a 10 shift should that machine move
Probably around 50,000 cubic yards in a 10 hour shift
What is the Capacity of the drag line bucket?
half the planet
Anywhere from 70 to 90 cubic yards
awesome idea, use Gig and long reach Crane truck instead of Excavators and dump trucks..
How much material gets moved in 12 hour shift I assume ??
80 yards a minute times 60, times 12. But it don't work the whole time. And probably not efficient every sshwinng. 50,000 yards? I worked a road job and we moved 30,000 a day with hoes and trucks.
@@awboat sshwinng!!! Lol
@@awboat it seems so majestic. I’m sure it would get boring to some. But trying to better your cycle time each scoop would be great challenge.
Where can I get a crane operators job ?
Scoop the dirt throw the dirt
Ok, so what exactly are we doing here again? Something about striping burdens or something? What are we trying to get to underneath?
Remove overburden to get at the coal seem below it
Must be somewhere west of the Mississippi
A few big ones still here in s w pa
how many yards of material does one scoop move?
I’m guessing 75 to 100yrds….I worked around a 84yrd 8250…look up coal mining in Appalachian and you’ll see the job and drag….at the end there’s 12 or 13 d11s all workin the same spot…
What kind of engine dose it have
It does not have an engine, these big machines are all have several electric motors fed by a single massive power line .
Y'all should put a go pro on the bucket, give us a whole different POV
Model Dragline , Marion or CAT ?
So what kind of operation is this
Digging overburden
Okey-dokey
Looks like Central Texas
I see the Texas flag up there, is this up in East Texas?
Для чего это нужно ?
I thought they didn’t mine coal in California ? This is very interesting though, I am enjoying watching this.
How do you eat an elephant 🐘?
With a knife & fork of course .
You don't realize how massive this thing is till you see the motor grader in the bottom left of the screen at 2:35 and it looks like an ant crawling along.
encore une magnifique vidéo....type de travaux pratiquement inconnu en France 🤷♂🤷♂😒😒
Stripping overburden with a Marion 8200 Dragline Soaked Clamshell
I wonder how much fuel it burns an hour?
None. It's electric
@@Bowiiihowdy no shit
@@Bowiiihowdy it must use a bunch of juice then that thing is huge
@@stevealber9779 25,000volts ran the one I worked around in hazard Ky…one on another job addigton 17 west was parked up time I got there…
@@arborist460 that's bad ass
I'm from S IL and we have a lot of strip pits, love to fish New Athens(River King Mine) the last open pit mine in IL to not be reclaimed, Marissa(Red Barrel) years ago, you'll get busted now, it was open to public until Waste Management bought up a big chunk, Pyramid State park the original park is really old mines, another 19,000 acres of pits was acquired back about 12 years ago.
In Cali?
Alot of time and effort for one seam
Is it coal?…
At first look quite strange that a larger bucket is not used, looks 'microscopic' in relation to the whole machine. On the other hand it likely is totally 'maxed' concerning size
The only thing that can move more material is a bucketwheel and those require ALL the infrastructure and cost multiples more.
This machine is already a pretty big monstrosity, but Caterpillar manufactures a few bigger models, the largest of which is an 8750 dragline that can scoop up to 152 cubic yards
I can imagine if you placed a regular excavator next to this monster, the regular excavator would probably get dwarfed!
Caterpillar includes the Marion brand. Marion Power Shovel sold to Dresser, who spun it off again before it was subsequently bought by Bucyrus-Erie in 1997 (they also bought Terex, in 2010). Bucyrus, in turn, was acquired by Cat in 2011. The Cat 8750 is their largest dragline, matching the Bucyrus 8750.
It's just a bucyrus with a cat sticker on it lad don't be fooled. Cat bought it all out. Same with the electric rope shovel's, and even their diggers. Cat 6090 digger is just a o&k rh400 with yellow paint and cat sticker on it
Nice Rigg... Boring job, it'll make you crazy after awhile. You'll get up in the morning or what ever shift you have and go, oh no another day drag after drag. Paycheck $$$ is real good.
y the stripping what are they after
Lignite
They aren't looking for the video description. But you should.
It doesn't look like California there, I didn't think they allowed machines like that in California anymore. My guess is a southern state. Pretty green for California.
California is a really big state. Folks have a lot of opinions while knowing nothing
I think this job could get a little bit repetitive.
.. Let the drag do the tube.. No music ta...
What a mind numbing job. Good video though.
С кабины нельза было показать..
ever fall asleep not kidding
Sounds like a dinosaur
Я проработал на шагающем драглайне 20лет, всё очень похоже и робота по вскрыше полезного ископаемого и карьер, и даже звук похож. Очень жаль, но росияне всё взорвали, всё забрала война.