@@ballsyxwith the air box removed it’s getting more air than what it normally would. Along with the exhaust being opened up its breathing better than what it was stock. Any time you make changes to the air box or exhaust it needs to be tuned for it to run efficiently as possible. It’ll run without a tune and the computer will adjust or try to to the changes made but it will not run as good as it could with a tune. These guys clearly know what they are doing. I’m sure they flashed the ecu or put a power commander on it at the least
I like this. I think it's cool. The only thing I would say about it is this, the welds need work. If I were to receive a quad from you like that, I'd send it back. Welds are super important, obviously, especially with that much power, and they look sketchy. I think consumers see those boogers they're going to think 🤔 "Why aren't the welds stacked?".
Is very pretty. Hopefully this 1 doesnt grenade! Needs a rear rotor drsperately....swingarm sticks out too as a tad budget....a billet suter would go down a treat, not that it will serve a purpose on the street. Would love and up to date weight and cost for this gem.
Not a fan of the decals or the red black and gold alone would be better imo sweet build tho can u build a r 600 raptor and make it for the off road guys
Assembled in hours, not built. You had all the parts laid out and already powered coated. All that was left was to put it together. I built mine in a week, working on it after I got off work from my normal job. That included starting from a bone stock Raptor and modifying the frame. Could it be done in 24 hours? Sure, with a few guys that know what they are doing. IDK why you didnt do that tho. Would have been a lot more of an interesting video, than putting together a lego set.
There’s zero need for frame fabrication here he got his shit professionally powder coated instead of a backyard spray paint job when it comes to this shit unless your engine swapping tuning or timing it’s all bolt on and off
Cause hes fuckin right ya twats....it wasnt a build. Literally an assembly. A build cosists of all works and fabrication being carried out. And what several blokes on it aswell plus they build these all the time so woopdy do
Are you guys still in business? I wish you would tell me if you are able to sell a person in the chassis able to accept the R1 motor that would be the star. You guys don’t have a catalogue where we can purchase these things to put together.
love the clean nice shop hate clutter and places that are just nasty as hell with a ton of junk everywhere keep your work area clean boys it will make a to of diff. but building a quad in 24hrs does not count if everything is already prepped that is not a 24 hour build that is assembly the build includes frame rework paint and all the prep almost click bait my friend
Because it can be registered and ridden on the road where he's from. He more than likely has the equivalent of a dealer registration or some type of exemption
Yeah tbf you assembled a raptor in 24 hrs, most of the build was done pre vid “because you knew it was coming” not that impressive tbh. And if i commissioned you to do a build and you went ripping on a “test drive” with my brand new rims and tyres id fukin leather you, goes without saying stock rims and tyres for a test dive not the customers, pretty poor mistake to make to be fair
hate to be the ass, but you did not build a r1 into a raptor in 24 hours. All you did was assemble it onto a frame already cut and welded etc. now if u cut the raptors frame and welded and installed the engine and everything, in 24 hours, then you can claim to have built a r1 into raptor in 24 hours.. " we installed a r1 engine in a already modified raptor frame in 24 hours" there i fixed the title for you free of charge.
@madmanmechanics have you guys ever thought about doing a show like pimp my quads because you guys are the best when it come to this if Yal do can I be the one whom you guys pimp my quad out
Very Nice. That crankcase cover with the scratch is a shame💪🏻
Not up on quads was wondering how much of the frame needs changing to support these big engines you put into a quad your builds are insane 🔥🔥
CMON @MadManMechanics are BACK! Suppose its time to get my BEASTS OUT 💪🏾🫡
When I read one of your comments I can hear you saying it haha
Good ole Stu.
Yo can you build me one brotha please I’m in the United States and I need one badly!!!!!!
@dmodeejay thinks its about that time
I love the step by step build video, great work
Do more videos like this. Really enjoyed this
Missed the video’s man keep em coming
That engine Needs a whole new ecu flash with the Airbox removed and a different exhaust. It is gonna be running super Lean
@@ballsyxwith the air box removed it’s getting more air than what it normally would. Along with the exhaust being opened up its breathing better than what it was stock. Any time you make changes to the air box or exhaust it needs to be tuned for it to run efficiently as possible. It’ll run without a tune and the computer will adjust or try to to the changes made but it will not run as good as it could with a tune. These guys clearly know what they are doing. I’m sure they flashed the ecu or put a power commander on it at the least
Sick bud
Love all your quads mate
From DMIS and Driva Dave
Wish had dolllar to buy one
One day maybe
Keep up the good work spot on look so much fun 👊👊
"Assembled" ,(how long it take modified frame for engine then powder coat?
you never fail to impress me
Very nice work guys. You guys offer builds to be shipped to the US?
Very nice quad bike. 😎
I’d love to have one! 😎
Where can I buy a custom frame??
how much is a frame and what motor can fit in it how about a Ducati motor v4
How much you Charge to make one of them
New rear roads on my 2010! She be ready soon..she said she wants too be a h2 when she grows up😂
Is the frame stock or custom because it looks so extremely sick
Insane POV of assembling this amazing toy
Is it hard to hook up the electronics? Thank you nice video❤
I like this. I think it's cool. The only thing I would say about it is this, the welds need work. If I were to receive a quad from you like that, I'd send it back. Welds are super important, obviously, especially with that much power, and they look sketchy. I think consumers see those boogers they're going to think 🤔 "Why aren't the welds stacked?".
I need this machine in my life looks badass and sounds amazing
Mad work madman
fuegooooo🔥
Next a turbo busa
Should've had that "assembled" half time, what took so long?
S’il vous plaît, comment ne plus avoir de vibration au guidon????
How much do the quads cost
How much does somthing like this cost? Shipping and all?
im so curious as to which commanders players bought this..
incredible build bro
Why the thumb throttles all the time though? They give me cramp and cant ride long distances
How much to build one
How much did you guys spend on this build?
I want one how do I get one?
Do y’all sell the frames with modifications to fit r1 motor?
Can y’all build a trx250
your shoelace looked like it was about to be eaten by the front sprocket
Is very pretty. Hopefully this 1 doesnt grenade! Needs a rear rotor drsperately....swingarm sticks out too as a tad budget....a billet suter would go down a treat, not that it will serve a purpose on the street. Would love and up to date weight and cost for this gem.
that wiring harness is insane
Not a fan of the decals or the red black and gold alone would be better imo sweet build tho can u build a r 600 raptor and make it for the off road guys
How much you sell these for
What fuel pump are you running on this??
Did you use the original Yamaha raptor fuel tank?
Why did the hide the dash from uss
Nice build. But thise powder coaters messed up the gold didnt they.
What’s up with the gold? They do the powder coat in house I believe?…
Price on one like that?
Bet you was gutted to see the scratch on the side casing? Apart from that awesome bike an build.
LETS GO 🔥
🔥🔥🔥
I swear if I ever win big I am buying a h2 quad of you guys
Guys can send the completed unit to the United States or can you send us the chassis we put on our one more
How can I buy one?
Dammm, i want a raptor like this😍😍 unfortunately not road legal in the Netherlands 😢
Man I’d love to rip something like this through the woods lol would be a wild experience for sure
Assembled in hours, not built. You had all the parts laid out and already powered coated. All that was left was to put it together. I built mine in a week, working on it after I got off work from my normal job. That included starting from a bone stock Raptor and modifying the frame. Could it be done in 24 hours? Sure, with a few guys that know what they are doing. IDK why you didnt do that tho. Would have been a lot more of an interesting video, than putting together a lego set.
There’s zero need for frame fabrication here he got his shit professionally powder coated instead of a backyard spray paint job when it comes to this shit unless your engine swapping tuning or timing it’s all bolt on and off
Serious hater right here
@@Tin-m5cinit man wrote a whole paragraph uno
😅@@faded_prodigy4202
Cause hes fuckin right ya twats....it wasnt a build. Literally an assembly. A build cosists of all works and fabrication being carried out. And what several blokes on it aswell plus they build these all the time so woopdy do
What Saints player this for
Are you guys still in business? I wish you would tell me if you are able to sell a person in the chassis able to accept the R1 motor that would be the star. You guys don’t have a catalogue where we can purchase these things to put together.
Sick brav
Sick build, but strange choose of colors tbh. If frame would be in red, it would look way cooler. But hey, it's his bike, his choices
"Washington redskins" the color scheme makes sense
That's what was ordered
@dominichines77 that’s not the redskins and it’s not even an NFL team it’s college it’s Florida state. I don’t know why he was saying nfl.
Perfect!
Sucks cause Cj Campbell jr. doesn’t even play for them anymore he transferred to FAU.
Quad wizards!
Dope work but the color scheme team colors or not they are god awful together on this atv
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
love the clean nice shop hate clutter and places that are just nasty as hell with a ton of junk everywhere keep your work area clean boys it will make a to of diff. but building a quad in 24hrs does not count if everything is already prepped that is not a 24 hour build that is assembly the build includes frame rework paint and all the prep almost click bait my friend
How much for a four wheeler
Around 20 bags
My dad said I’m a mad man quad no helmet 115 on the motorway
And FSU is maroon not red. That why it doesn’t look good with the graphics.
Proctor hola at ur boy
That team is not NFL it NCAA
👍🏻🔥🔥🔥
I can see
All stolen r1 engines that have been re stamped
Your riding a 4wheeler illegally on the road why cover the spedo?
Because it can be registered and ridden on the road where he's from. He more than likely has the equivalent of a dealer registration or some type of exemption
Interesting and informative 🤑
Yeah tbf you assembled a raptor in 24 hrs, most of the build was done pre vid “because you knew it was coming” not that impressive tbh.
And if i commissioned you to do a build and you went ripping on a “test drive” with my brand new rims and tyres id fukin leather you, goes without saying stock rims and tyres for a test dive not the customers, pretty poor mistake to make to be fair
Awesome bike shit plastics
Why you hide dashboard? you stole it? Polish guys doing this job way better.
hate to be the ass, but you did not build a r1 into a raptor in 24 hours. All you did was assemble it onto a frame already cut and welded etc. now if u cut the raptors frame and welded and installed the engine and everything, in 24 hours, then you can claim to have built a r1 into raptor in 24 hours.. " we installed a r1 engine in a already modified raptor frame in 24 hours" there i fixed the title for you free of charge.
@madmanmechanics have you guys ever thought about doing a show like pimp my quads because you guys are the best when it come to this if Yal do can I be the one whom you guys pimp my quad out
gorgeous bro
I want one of these 🫡
I'd love a r1 quad but I'm poor dmodeejay pretty please buy me one lol
Is it for Talanoa Hufanga?! 🤔🫡
Do more videos like this. Really enjoyed this