Your going to want to put a oil scavenge pump on the return line of that turbo, being that the drain goes to the Lowest part of the pan It will keep that hose full and will smoke the seals out of the turbo, SAE outlaw performance makes one specifically for turbo busa motors, and they’re not too pricey
Hey bud, just wanted to say awesome job. Looks like it's gonna be tons of fun. As a welder for over 20 years and a fabricator for longer than that, one thing you can do on those joints you welded that your worrying about them cracking, sleeve those joints with some heavy wall tubing, pipe, or even rounds stock, and it will be MOREEEEEEE than stout enough to hold up and you don't have to add extra gussetts or unneeded pipe. Especially in those hard to reach places. Just some food for thought.
Wow, Vasily, you've outdone yourself on this build!!! Good God, you have talent that sooner or later will be recognized and you WILL be rewarded BIGLY. And your choice of music in this episode, from start to finish, is fricken awesome, I might add. And, God bless you too!
@@VasilyBuildsHey what’s up. This is great content. I only see the euro guys making these kind of builds. How much would something like this cost? Or even just a motor swap itself?
I'm not so sure about using those drain plugs in aluminium. Could you bottom out and loctite studs in the holes for maximum thread contact? If you want to keep it looking good, use stainless dome head nuts (aka acorn nuts). You can buff them up to look like chrome. With the power that engine produces, there are going to be substantial shear force on those mounts, and I would definitely worry that the aluminium threads will eventually fail. I mean it's not like you are going to take it easy with that thing.😉
I was pushing 120hp on my 09 Raptor with a mild cam, +3 TB, +2 valves and a 15psi D9 kit. Cracked the case, but just bought an aluminum block that we're gonna throw dual turbskies on. They're a blast.
Nice i built a sand racer once , took a xr650L and big bored it into a 400ex frame, light and powerfull, made my own extended swing arm out of DOM steel , used a 91 piston because over that is dieseling, I never tig welded before nice job, when you place a turbo its best to leave motor stock so it lasts, Il give you a trick, use auto motive oil the clutch will not slip when motor is warm
That quad is looking amazing! congratulations, just my opinion, but it's the best project of yours so far. I look forward to seeing you ripping that thing at WOT.
If it were me, I'd put a bump stop on the swing arm just for peace of mind to protect the gas tank from rupturing and mock up a skid plate for the bottom of the engine since it sits lower than the frame. As for the turbo, maybe a front bumper with a cage to keep debris from getting wedged inside as well as protection from accidental impacts. It's probably overkill, but the power and speed this death machine possesses, any extra safeguards can't hurt! LOL!! This build is epic! Love it!
Good God bro ... this this is radical af ... mad respect to the build bro .. peace and love, keep it rad, stay safe, and build on. .l8z bro and keep having fun
Few changes . Tie that front end down or get racing struts, and put a 240mph gear set on that thing so it won't be so aggressive with that boost and 1300 engine
Nice work dude, that’s sick! You should invest in a tungsten sharpener if you haven’t already. It makes a WORLD of difference in your weld quality. Not saying yours is bad just trying to help a fellow fabricator out.
Should powdercoat those wheels or get black beadlocks with better tires & may want to upgrade the suspension for extra weight and power .... other than that it's a really cool build!
I'll have the exhaust at least at a 90 down, Coz as is if you have oil out the exhaust its straight on to the left front wheel. But apart from that cool build so far.
i aint never seen someone break a oil drain bolt lol if it breaks holding the engine in the frame is that worse than if the drain plug fell out the oil pan while ripping????
I can see you melting the front left tire with that exhaust like it is. It does look great and sounds amazing with that Hayabusa engine in it. Still haven't figured out why you didn't powder coat the front suspension parts with the rest.
I gotta pause quick during that aluminum fuel cell fab....man, there's no way there's enough room for full rear suspension articulation with that thing back there like that, there can't be 😅
Hey, what’s up brother? Don’t forget to put an oil stricter in for the turbo or are you gonna blow it up just saying love the build. Can’t wait for the next video.
Hell yeah dude it's these type of builds that set you apart from other channels for sure! Definitely one of my favorite build channels!!
Hell of a build, i think its pretty dangerous too xDD
Your going to want to put a oil scavenge pump on the return line of that turbo, being that the drain goes to the Lowest part of the pan It will keep that hose full and will smoke the seals out of the turbo, SAE outlaw performance makes one specifically for turbo busa motors, and they’re not too pricey
This is hands down the baddest quad I have ever seen.
10:51 nice IROC! I had one exactly like it. Same color. Mine was an 88! I miss it terribly!
I had a silver 85 Iroc. Great car, tons of fun until my wife in her minivan wanted to race 🙂
Hell yeah! Love the way you’re n it afraid to critique your own work, then cut out and redo it. Awesome build
Hey bud, just wanted to say awesome job. Looks like it's gonna be tons of fun. As a welder for over 20 years and a fabricator for longer than that, one thing you can do on those joints you welded that your worrying about them cracking, sleeve those joints with some heavy wall tubing, pipe, or even rounds stock, and it will be MOREEEEEEE than stout enough to hold up and you don't have to add extra gussetts or unneeded pipe. Especially in those hard to reach places. Just some food for thought.
You are an inspiration young man, skills and talent, its a pleasure to watch
Been following for a few yrs now, this gotta be one of the best, come a long way
Wow, Vasily, you've outdone yourself on this build!!! Good God, you have talent that sooner or later will be recognized and you WILL be rewarded BIGLY. And your choice of music in this episode, from start to finish, is fricken awesome, I might add. And, God bless you too!
Thanks!
@@VasilyBuildsHey what’s up. This is great content. I only see the euro guys making these kind of builds. How much would something like this cost? Or even just a motor swap itself?
I'm not so sure about using those drain plugs in aluminium. Could you bottom out and loctite studs in the holes for maximum thread contact? If you want to keep it looking good, use stainless dome head nuts (aka acorn nuts). You can buff them up to look like chrome. With the power that engine produces, there are going to be substantial shear force on those mounts, and I would definitely worry that the aluminium threads will eventually fail. I mean it's not like you are going to take it easy with that thing.😉
Damn this build is looking absolutely awesome well done . Your fabrication skills have grown immensely excellent job my man !
man your welding skills are unreal
Dang you've been busy
Well done
That thing's awesome. I'm impressed.
Can’t believe you haven’t broken a million subscribers yet bro your seriously one of the best fabricators on this app 💪
I was pushing 120hp on my 09 Raptor with a mild cam, +3 TB, +2 valves and a 15psi D9 kit. Cracked the case, but just bought an aluminum block that we're gonna throw dual turbskies on. They're a blast.
15 psi? That is a LOT. Very cool though! I assume you must ride a lot of sand (and/or drag race)?
The best bike builder on RUclips.. fact
Nice i built a sand racer once , took a xr650L and big bored it into a 400ex frame, light and powerfull, made my own extended swing arm out of DOM steel , used a 91 piston because over that is dieseling, I never tig welded before nice job, when you place a turbo its best to leave motor stock so it lasts, Il give you a trick, use auto motive oil the clutch will not slip when motor is warm
That quad is looking amazing! congratulations, just my opinion, but it's the best project of yours so far. I look forward to seeing you ripping that thing at WOT.
Nice build, looks heavy though. I'm betting it's fun. Curious about a Maico 700 2-stroke engine in a atv frame.
That engine case is going to break where you tapped the holes. There is a reason motor mount bolts from factory go all the way through
Your skills have come a long way mate, this project is next level
YESSSS!!! IVE BEEN WAITING FOR THIS VIDEOOOO
If it were me, I'd put a bump stop on the swing arm just for peace of mind to protect the gas tank from rupturing and mock up a skid plate for the bottom of the engine since it sits lower than the frame. As for the turbo, maybe a front bumper with a cage to keep debris from getting wedged inside as well as protection from accidental impacts. It's probably overkill, but the power and speed this death machine possesses, any extra safeguards can't hurt! LOL!! This build is epic! Love it!
Airbag vest too mate. Want to keeping watching your builds for many years to come
Exhaust should be level or face down to prevent water from standing in the pipe. Otherwise a cool build.
On the sand would be the go 👍
had the same back tires on my raptor and love them went everywhere i wanted to go love the build
You have come along ways, great builds keep it up
i like how you keep it with the stock look -----great job --looks like a fun and fast ride --- great video like always
Sounds mint, looks mint ,it is mint,great job bro ,air vest as well wouldn’t harm any ,you may need a parachute lol,it’s gona be flying ,😎😎
Good God bro ... this this is radical af ... mad respect to the build bro .. peace and love, keep it rad, stay safe, and build on. .l8z bro and keep having fun
Right on, great job, I like how the turbo is mounted in a perfect location plan cause, the turbo is a great mod .
Brother is ripping a legit rocket in his crocs, mad respect.
You're the man bro
Badass! Looking awsome man
Sharp bro 😎💪🏽🔥😊
Top of the morning ! Friday inspiration!
I want to see more content. I love all the builds!! Hope to be able to do half of you do one day
Wow bro amazing work take that thing to glamis this upcoming season that thing belongs out there !
Man dude great quad build you really do a perfect job
i would put wider width metal bars so the tires are spread out more for safety measures basically and itll look good
SICK!!!! and 24min vid too! love t! keep it UP
Nice execution of a plan bro. It's nice work
So cool! Really compact build, I love it 💯
Really liked your direction with thjs build...
Sweet build. I can see that oil return for the turbo being a problem possibly.
That Iroc Z in that shop was CLEEAANNNNN!!
Few changes . Tie that front end down or get racing struts, and put a 240mph gear set on that thing so it won't be so aggressive with that boost and 1300 engine
Love your videos ❤‼️
Nice work dude, that’s sick! You should invest in a tungsten sharpener if you haven’t already. It makes a WORLD of difference in your weld quality. Not saying yours is bad just trying to help a fellow fabricator out.
It's kinds refreshing that you posted a longer video this time.👍🏼😁
It turned out wicked awesome man.. its gonna freaking rip
Awesome job Vasily !
lots of good fab work here - excellent
Should powdercoat those wheels or get black beadlocks with better tires & may want to upgrade the suspension for extra weight and power .... other than that it's a really cool build!
LEGENDARY BUILD BROTHER
I would definitely get an air filter on that turbo if you plan on riding it in the dirt are any Dusty environment
Finally❤
Love this build
You sir are a special kind of crazy and I freakin love it!! Got some mad skills too!!
Well done! Very impressive!
Gday mate
Yes, sir you do some nice work no doubt about it! That thing is going to be totally insane with that much horsepower😅
I like the front view, where you can see the ugly dirty, muddy and rusty A-arms with rattle can blue on top and bare stock dirt on bottom- TOP BUILD!
You should get together with Grind hard pluming
New subscriber here. Awesome video and much love to ya from Maryland❤❤❤
When ya weldin with AC turn up ya frequency,apart from the fact it sounds alot better ya also get better welds
Nice Job, I did a R1 swap with the 660 frame
Soo sick!! Can’t wait to hear you string it out! Great job!
I'll have the exhaust at least at a 90 down, Coz as is if you have oil out the exhaust its straight on to the left front wheel. But apart from that cool build so far.
This is batshit crazy. I LOVE it! Just be careful not to backflip it at 120mph!
Good shit bro you do good work
In the world of fabrication wverythings just temporary. What is this today, can be that tomorrow! Nice video kid!
Hello, awesome video. I am actually in Adamsville, TN where is your powercoater located in TN? Blessings
This quad is sick frr😈😈
Fr
Help this guy. We wanna get a him out of them Crocs.😮 into some yeah dudes 😂
Crocs are timeless and cool. I had a pair of Hey Dudes, and they were like wearing cardboard on my feet. So cheap and flimsy, but not cheap to buy!
Perfect quad for Turf Wars!
he has been up in minnesota with the cboys so I bet that could happen
10:58 I had the very same '87 IROC that's in the CA Technologies.
Are you gonna add a skidplate? Because the oil filter and oil lines are pretty close to the ground
bro you got to get the 300xrx-e go kart..........i love the go kart vids
Niiiiccceee ❤
The custom powersports goat.
Been watching since the twing engine go kart, shit tuff
The invisible mask the powder coat guy was wearing was awesome
FreeDUMB!! 😂😂
You got put some blinkers on it & register it, so you can rip it on the streets legally! Came out real nice…..✌🏻💯🔥
How come you did not turn up the exhaust tip so the heat doesn’t dump straight to the tire!
those drain plugs snap right out when u give at good gas one time with a quick clutch🤣🤣 nice build tho
Awesome job 👍🏻👍🏻🇺🇸
Awesome flying to the moon 🌙😅
INCREDIBLE BRO!!!!
i aint never seen someone break a oil drain bolt lol if it breaks holding the engine in the frame is that worse than if the drain plug fell out the oil pan while ripping????
Sorry for being late to the party. Great Channel!
Awesome build! I think your turbo oil return is going to be a big problem, oil return needs to be above the level. Turbo is going to smoke
I can see you melting the front left tire with that exhaust like it is. It does look great and sounds amazing with that Hayabusa engine in it. Still haven't figured out why you didn't powder coat the front suspension parts with the rest.
I gotta pause quick during that aluminum fuel cell fab....man, there's no way there's enough room for full rear suspension articulation with that thing back there like that, there can't be 😅
Yes Vas!
How much did the quad end up weighing after all this was done? That would be a very interesting thing to know.
Dude, that’s sick as fuck bro. Can’t wait to see it 100% done and dialed in.
Bro got the broccoli 🥦 cut!! 😂😂
Hey, what’s up brother? Don’t forget to put an oil stricter in for the turbo or are you gonna blow it up just saying love the build. Can’t wait for the next video.