DIY Micro Brushed ESC from Board Servo Tower Pro SG90

In this video, we will learn how to make a DIY Micro Brushed ESC from a Board Servo Tower Pro SG90. You will be guided step-by-step to create a simple yet effective electronic speed controller for a brushed DC motor. Follow along and learn how to make a unique and efficient device for your hobby robotics projects.
The Micro Brushed ESC (Electronic Speed Controller) is a component used in radio-controlled devices, such as drones and RC cars, to control the speed of a brushed DC motor. The "Board Servo Tower Pro SG90" refers to a specific type of servo motor, the Tower Pro SG90, which is commonly used in hobby robotics projects. It is likely that the "Micro Brushed ESC" is designed to be used with this specific servo motor, but more information is needed to confirm this.
DIY Micro Brushed ESC
Board Servo Tower Pro SG90
Electronic speed controller
Brushed DC motor
Hobby robotics
Step-by-step guide

[@wowyummyyy]

LIKE 👍👍👍👍👍 🤩🤩🤩🤩🤩💖💖💖💖

[@kieren7763]

Im looking to run a little rc plane motor similar to the one in a servo would there be any issues with the reciever overheating from the power running through it

[@TTD.DIY92]

If you use a brush motor, you should use a governor with its own power supply and the collector is only a control function for the governor, the power will run through the esc and divide it into 2 lines, a 6v line for the collector and the line. the rest is a high amperage current for the motor

[@TTD.DIY92]

shopee.vn/product/964867567/22838814070?gbraid=0AAAAADPpQE6shrkAENVtTrOI3DEwh8s3u&gclid=EAIaIQobChMImdXW5q3w_gIVDSxgCh2DJgALEAQYBCABEgLPU_D_BwE

[@kieren7763]

@@TTD.DIY92 thank you

[@gaberelhassan9527]

How can use this idea for control brushed motor 775 12 volt

[@JonnyWaldes]

probably not compatible

[@ranjithchinnu]

Can I know what the input voltage
And out put amps

[@JonnyWaldes]

5 volts. Low amps like 200 milliamps.

[@Mix-sq3jz]

What is the resistance number

[@TTD.DIY92]

1k resistors can use other resistors just so that both sides have equal resistance. having some paste resistors will be more compact

[@franciscoalgar2713]

Se podrian conectar dos motores en uno?

[@TTD.DIY92]

I think the amperage will not be enough

[@franciscoalgar2713]

Que resiencias usas?

[@TTD.DIY92]

2 resistors of equal value are fine, try the 100 ohm type

[@Qodarkholeq]

Fungsi towenya buat apa ya..klo langsung ke esc nya bisa gak bang

[@TTD.DIY92]

Yes

[@MyBoast]

Rangkaian tower itu yg dijadikan esc untuk motor/dinamo kecil bro. Buat rc pesawat atau utk modul lampu di rc mobil