I used your suggestions for pruning and had super great results. This is an amazing technique and easy to accomplish. If you are sensitive, just consider it is plant yoga poses, they will love you for it!!
That's a GREAT news and I am so glad to know about your result! Obviously you have done a great job! Again, loved your humor..ha ha...Yoga poses, that's really nice..he he..
I also saw this video sometime last year and thought it was worth a shot. I wish you could upload images in the comments. I had combined a Ficus Aurdey with me Elasticia and since i wanted to keep them together I followed your example and bent them both in almost a complete upside down "U" and anchored them to wooden skewers (like for the grill) I took a photo on 6/13/23 and some in between to record the results and finally the end date was 10/13/23 and the results were amazing. The best thing was that i didn't have any trouble straightening them out. The bending was not permanant.
I tried this method last year Oct 22 thru April 2022 and the experiment yielded positive results. I conducted the experiment during the off season, so I didnt see new nodes pop up until the 4th month. So, the key is definitely patience!! Thank you for sharing
I just laid it on the floor as it grew 8ft tall and was falling down every now and then due to wind. After keeping it laid down on the floor for 2 weeks it gave side branches automatically. (To be noted that I watered it regularly though by making it stand)
I've found spraying the branches with water often will moisten and promote new growth where those cracks are where the new growth usually starts..but i love the technique thanks for sharing!!
there's a very good reason why this works and why it would also work to just prune off the top growth or put the whole plant on its side. This guy didn't go into it at all and I doubt he knew it otherwise he'd explain. just putting it on its side is the simplest way to remove the 'top'
Amazing video. I have a 3ft tall rubber plant, no branches, many leaves, but very thin and leggy. Definitely going to try around early March 2025. Thinking of pruning scares me, cutting the head of anything is scary. I was thinking about notching. But now I'm going to try this first. It's like disciplining a teenager. Branch out, try new things! Don't be stubborn! Lol. If it works, all credits to you!
From my bonsai knowledge, I believe those bending create small cracks on the trunk that stimulates branching out. And also of course like you said the tree is looking for more light & growing upward.
Auxin induces shoot apical dominance. The axillary buds are inhibited by auxin, as a high concentration of auxin directly stimulates ethylene synthesis in lateral buds, causing inhibition of their growth and potentiation of apical dominance. When the apex of the plant is removed, the inhibitory effect is removed and the growth of lateral buds is enhanced. Auxin is sent to the part of the plant facing the light, and this promotes growth towards that direction.
That's so sweet..ha ha..can understand you love towards the plants 😊😊 We all feel the same..Glad you found the tips useful and thank you very much for watching 😊
I'm so happy that I stumbled across this video!! I was just wondering what to do with my fiddle leaf fig and my rubber trees since they were just growing straight up and it made me cringe to even think about cutting them because they were almost dead when I got them and it's been a long road to get them where they are now. For example, my FLF was bought on clearance for 1.99 because it was basically a stick with two leaves on it. Now it's got at least twenty leaves and it's doing great! So I'm definitely going to try this method rather than pruning her back! Thank you!!!
This method worked for me, I've bent my plant before summer and it started growing two new branches after 3 months. The plant growth affected during summer, I don't if that is the reason why it took so long to show branches. Thank you sir.. It helped me a lot..
@Kellycasper Hanson, Thinking why you thought that way..perhaps, my reply was not the right one :-( Sorry if you felt bad as I didn't present any .......for your plant. But, obviously felt bad and so I wrote - "Wish, I could've uploaded much earlier.." Anyway, happy growing more plants and totally agree with your words..Internet is a great thing :-)
Yes its worked..it happen to me by accidentally i dont give attention to my leggy rubber tree then it goes bending for a month and suprisingly they start growing new branches 😊 100% agreed this method..also it happen to other plants too..natures finds there ways to live,,AMAZING
So glad to hear it and thank you for sharing your experience! And totally agree with you, happens with any plants and I usually do it with vines to control them and to make them bushy :-)
Auxin induces shoot apical dominance. The axillary buds are inhibited by auxin, as a high concentration of auxin directly stimulates ethylene synthesis in lateral buds, causing inhibition of their growth and potentiation of apical dominance. When the apex of the plant is removed, the inhibitory effect is removed and the growth of lateral buds is enhanced. Auxin is sent to the part of the plant facing the light, and this promotes growth towards that direction.
Thank you so much for this technique!! I pruned my rubber plant 4-5 months ago and it hasn't grown at all since; instead it actually lost some of the bottom leaves :( Now with the weather turning warmer in the southern hemisphere, I'm hoping it will revive and branch. Could you share any tips on reviving the plant? Thanks in advance!
I propagated my Ruby rubber plant its doing well I have two trees in that pot and did a cutting from each tree. One cutting do well othe has not rooted nor has its new shoot opened after a month. I was cringing the whole time you were helping this tree great job Sir!
Glad you liked it and thank you very much for your feedback! Yeah, if it has a single stem, it is better to follow this. But, we can get good result by pruning too..I did same for one of my plant (having single stem) and result was quite satisfactory. Have a video in case you are interested in watching - ruclips.net/video/B3X_e6DbTq8/видео.html
Ficus have dormant buds in each node. Move your tree outside in the summer and it will usually backbud without much fuss. The reason rubber trees get leggy is we starve them for light by keeping them inside.
Can confirm, I live in a area where we get cold winters, but this summer, I put my rubber fig outside. After letting it adjust to direct sunlight, It started to bud EVERYWHERE on the trunk! I have like 4 new branches now and it produced beautiful big leaves. I can recommend everyone to put their houseplants outside if possible. Houseplants? More like "winter houseplants".
Thanks for sharing these valuable informations. The appearance of your sweet baby in the video made me so happy. She is so cute and adorable really I love her. She reminds me of my grand daughter who is now living in Pune. Let God shower His blessings upon her through out her life.
Im gonna try this. My elastica has not grown at all since i got it last summer. Now it has two big leaves that are hanging straight down along side the stem after the other 7 fell off one by one about 1 a month. Thanks so much for this Vidio so glad it came up in my notifications. Have definatly subscribed and nice one for the subtitles. Helps alot.
Even notching and making rings around the stem helps in getting side branches I've done it on all ficus group of plants and was successful. Anyway thanks for your new method.
Yeah, that also works and thank you very much for sharing your experience here, appreciated! Have a you tried the same method (in reverse way) to control the height of the plant? In some plants, we can do that. But haven't tried on Rubber plant yet. Please let me know your experience if you have done.
Notching has never ever worked for me. Ive tried it on three different plants, multiple times, all now 6 feet tall. Nothing! Not even a single bud. The plants are all super healthy though. Gonna try this method starting today.
You are most welcome and I am so glad to know about your result, GREAT job indeed! One more thing - I believe you have noticed there was no music in the video..ha ha..did that just for you! Not all time it's possible as lots of constructions works going around here and busy roads nearby..but, whenever possible, I would do it!
It's mindblowing! Thank you for the video, I have a small rubber plant with a soft bendy stem, that would be a fun experiment. And I Iove your accent, you make english sound way more interesting! (Not a native speaker myself)
Great Video and very interesting to make the plant busy. I have a very large plant in a pot outside (Western Australia) lots of sun therefore growing very high with some branches sparse of leaves. Pruning has resulted in more lower leaves, happy with this. My concern is how to keep the plant a reasonable size (currently two (2) meters high) and busy as it a main feature of my entry. Will pruning the top cause the plant to be root bound. Thank you. I enjoy your videos and great advise on rubber plants.
So this has similar aspects in it to Bonsai methods. Makes perfect sense. Have a ? Do you twist the plant the opposite direction to get new growth encourage on they other side so the plant is fairly symmetrical all around or does the plant spout on bottom side that is shaded and then correct its self when you return the plant to the upright position? Hope this ? Makes sense. Thanks 😊
@Debbie Fox, You are 100% correct 😊 Mostly used in Bonsai..and even on Adenium too to force them to produce more branches. Twisting is not necessary..or else the stem might break. Actually, kept the growing point facing west (as there is a wall just behind the plant) This way, it had to produce new growth which can get more light from east side. But anyway, doing exactly same like me is not necessary (like, keeping behind a wall and facing to west). All plants would produce new growth because of their natural growing habit. If I cut the rope, it would correct itself in coming days. For that, I would just need to make sure that it's getting light from all side. If it's not possible, we can just adjust the location of the plant based on the direction of the light. All plants always bend in case there is a wall behind it and light is coming from other side. I hope, I have answered your question..if somehow I got it wrong, please let me know. Thank you!
I saw some massive rubber trees in mexico this year and most of the branches actually point downwards but they don’t branch out. So I think you damaged the stem which is causing the growth lower down. Interesting technique though! Are you planning to straighten the plant back up or will you be pruning the top once the new shoots fill in more? I’d love to see an update in a few months. Thanks for sharing
Great video! Is it possible to achieve such results even if the stem still has leafs or should I remove some and then try to bend it? I have my rubber plant for almost 4 years now, unfortunately it has only one stem. Tried your other method last year (by pruning the top part) unfortunately my plant just kept growing as usual, haha.
Glad you liked it and thank you so much for your feedback. Sure, it is possible and please avoid removing the leaves. You can bend the stem without even removing any leaves. Again, sorry to hear that Pruning didn't work out for you. Normally it does if all goes well (need hard pruning). Anyway, sometimes plants just like to behave in their own way..he he..and don't grow like we want. I have pruned many of my Rubber plants (including the one I have shown in last year's video) again and soon I would share the result. Thank you!
I just tried this method on my verigated rudder plant on 28july iam waiting for the result...At 1st i was so scared to do this for my plant but after reading yoga pose in comments...iam convinced😂
my rubber plant's stem is too hard due to being tall already and i need to do the same fix you've explained in this video. for harder stems, what would you recommend? thanks for this informative video.
I had used this technique on my leggy Banyan bonsai, most grew branched & a few areal roots, next I’ll chop off the ends during monsoons to get compact canopy 🤞
Very good informative video ....I killed my rubber plant earlier last summer ....never tried again due to harsh weather here ....very effective tips ...thanks for sharing
Thank you so much for your feedback and sorry to know..Since it's too hot over there, I believe you can grow all these Heat Tolerant plants - ruclips.net/video/7M11juZaJ_8/видео.html It's an old video and I would try to update the list in coming days, thank you!
I’m shocked!! 🤯😳 my plant is very leggy looks just like the first plant I’m so scared to bend it. Once the leaves come in at the lower part of the stem then what do you do untie it and does it straighten back up?
@Mrs. Loya, Please don't get scared to bend the plant..actually, it's quite safer than pruning. >> Once the leaves come in at the lower part of the stem then what do you do untie it and does it straighten back up? We just need to simply cut the rope and it would grow like normal plants. But, we can help the plant to do that faster simply providing the light from opposite direction. Means, if the main stem was aiming to the left side, provide more light from the right side (after cutting the rope). Eventually, it would straighten up itself. I would update it soon...Good luck :-)
that’s beautiful I had my rubber tree for 4 months no new leaves yet I cut the tip (without the leaf just the tip)at the top part to bloom new leaf,I’m nit sure if I did it right, or should I cut the tip with a leaf also? please let me know if I did the right thing
Thanks a lot! Very informative! Though I have a question how to deal with the "opposite" side of tank when we have new multipul growth points on the other side. How to bend and not to damage new growth?
If you want bushier rubber plant simply cut or remove the new growth from the top.. And than see the magic... Tried and tested Successfully.... My tinke fully lush and bushier 🍀🌱🌿💯🙏
Sir may I ask you question? I have bought rubber plant on line. It was last Dec 11,2022 but only delivered Jan 11,2023. It looks disaster in the box because the rubber plant are already partially rotten due to super wet, i guess because the leaves is already tangle down. Whats left was the 2 stem with very wet small amount of soil that placed in small plastic. What I did is I immediately repot in dry and well draining soil and place it in balcony where no direct exposure of sunlight, 😢 do you think my rubber plant can still grow? Although in the uppermost stem has small leaf that were about to bloom unfortunately sue to the stress inside the box while on transit make lots of leaves fell off.
Woukd it work to just... place the plant at an angle, without bending it? And once it has new branches on one side, the have it at the opposite angle, to get branches on both side and keep the main trunk growing?
I used your suggestions for pruning and had super great results. This is an amazing technique and easy to accomplish. If you are sensitive, just consider it is plant yoga poses, they will love you for it!!
That's a GREAT news and I am so glad to know about your result! Obviously you have done a great job! Again, loved your humor..ha ha...Yoga poses, that's really nice..he he..
😂
@@GardeningUpbeat N
You use this technique if you are creating Bonsai of this plant.
I wish I could post a picture. I finally have two new branches on my rubber plant thanks to your pruning technique. So excited!
I also saw this video sometime last year and thought it was worth a shot. I wish you could upload images in the comments. I had combined a Ficus Aurdey with me Elasticia and since i wanted to keep them together I followed your example and bent them both in almost a complete upside down "U" and anchored them to wooden skewers (like for the grill) I took a photo on 6/13/23 and some in between to record the results and finally the end date was 10/13/23 and the results were amazing. The best thing was that i didn't have any trouble straightening them out. The bending was not permanant.
I tried this method last year Oct 22 thru April 2022 and the experiment yielded positive results. I conducted the experiment during the off season, so I didnt see new nodes pop up until the 4th month. So, the key is definitely patience!! Thank you for sharing
You are most welcome and very glad to know, it worked for you! Thank you very much for sharing your experience!
I just laid it on the floor as it grew 8ft tall and was falling down every now and then due to wind. After keeping it laid down on the floor for 2 weeks it gave side branches automatically. (To be noted that I watered it regularly though by making it stand)
🤯🤯
This is really good information,and so easy to do,thanks
Did you laid it sideways ( horizontaly)or just laid it on the floor (vertical)?
Wow… that’s an amazing tip to follow
😂
I've found spraying the branches with water often will moisten and promote new growth where those cracks are where the new growth usually starts..but i love the technique thanks for sharing!!
there's a very good reason why this works and why it would also work to just prune off the top growth or put the whole plant on its side. This guy didn't go into it at all and I doubt he knew it otherwise he'd explain. just putting it on its side is the simplest way to remove the 'top'
I tried this on a tree with nothing but a single leaf left. Amazing results
Lol!
You can count the leaves before and after . 2 different.
😂
Amazing video. I have a 3ft tall rubber plant, no branches, many leaves, but very thin and leggy. Definitely going to try around early March 2025.
Thinking of pruning scares me, cutting the head of anything is scary. I was thinking about notching. But now I'm going to try this first. It's like disciplining a teenager. Branch out, try new things! Don't be stubborn! Lol.
If it works, all credits to you!
From my bonsai knowledge, I believe those bending create small cracks on the trunk that stimulates branching out.
And also of course like you said the tree is looking for more light & growing upward.
Any basic disruption in hormone flow.
Auxin
Auxin induces shoot apical dominance. The axillary buds are inhibited by auxin, as a high concentration of auxin directly stimulates ethylene synthesis in lateral buds, causing inhibition of their growth and potentiation of apical dominance. When the apex of the plant is removed, the inhibitory effect is removed and the growth of lateral buds is enhanced. Auxin is sent to the part of the plant facing the light, and this promotes growth towards that direction.
Is that the purpose of the bending?!
I truly love my plants. I call them my babies. Your tips and tricks are invaluable. Tank you!
That's so sweet..ha ha..can understand you love towards the plants 😊😊 We all feel the same..Glad you found the tips useful and thank you very much for watching 😊
I'm so happy that I stumbled across this video!! I was just wondering what to do with my fiddle leaf fig and my rubber trees since they were just growing straight up and it made me cringe to even think about cutting them because they were almost dead when I got them and it's been a long road to get them where they are now. For example, my FLF was bought on clearance for 1.99 because it was basically a stick with two leaves on it. Now it's got at least twenty leaves and it's doing great! So I'm definitely going to try this method rather than pruning her back! Thank you!!!
This method worked for me, I've bent my plant before summer and it started growing two new branches after 3 months. The plant growth affected during summer, I don't if that is the reason why it took so long to show branches. Thank you sir.. It helped me a lot..
This is amazing. I wish I knew this before! Sadly, I threw away my plant when the leaves dropped off. I thought it was hopeless.
Thank you!
Glad you liked it and thank you So much for your words! Wish, I could've uploaded much earlier..:-(
@@GardeningUpbeat
You seem VERY busy, so no problem!
How nice to connect across the world❤!
@Kellycasper Hanson, Thinking why you thought that way..perhaps, my reply was not the right one :-( Sorry if you felt bad as I didn't present any .......for your plant. But, obviously felt bad and so I wrote - "Wish, I could've uploaded much earlier.." Anyway, happy growing more plants and totally agree with your words..Internet is a great thing :-)
Yes its worked..it happen to me by accidentally i dont give attention to my leggy rubber tree then it goes bending for a month and suprisingly they start growing new branches 😊 100% agreed this method..also it happen to other plants too..natures finds there ways to live,,AMAZING
So glad to hear it and thank you for sharing your experience! And totally agree with you, happens with any plants and I usually do it with vines to control them and to make them bushy :-)
Auxin induces shoot apical dominance. The axillary buds are inhibited by auxin, as a high concentration of auxin directly stimulates ethylene synthesis in lateral buds, causing inhibition of their growth and potentiation of apical dominance. When the apex of the plant is removed, the inhibitory effect is removed and the growth of lateral buds is enhanced. Auxin is sent to the part of the plant facing the light, and this promotes growth towards that direction.
Are you still making videos?
@@ctoro2711 yes
Wow I’ve been wondering how to save my plant that looks exactly like this one!! I’ll try this and see what happens!!
Wish you all the best and sorry for the late reply!
Thank you so much for this technique!! I pruned my rubber plant 4-5 months ago and it hasn't grown at all since; instead it actually lost some of the bottom leaves :( Now with the weather turning warmer in the southern hemisphere, I'm hoping it will revive and branch. Could you share any tips on reviving the plant? Thanks in advance!
This technic is very common in bonsai. People do this to force the plant grow branches in specific places. It really works!
Hello. I had followed this technique and it was a great success. Thank u so much for providing this information ❤
I propagated my Ruby rubber plant its doing well I have two trees in that pot and did a cutting from each tree. One cutting do well othe has not rooted nor has its new shoot opened after a month. I was cringing the whole time you were helping this tree great job Sir!
Amazing! Does the plant straighten out again once you release it from the wires?
Good question, I was thinking the same. Hope you get a reply.
I’m very impressed by your technique .I think I much prefer your method over pruning, especially when you have only a single stem👍🏻
Glad you liked it and thank you very much for your feedback! Yeah, if it has a single stem, it is better to follow this. But, we can get good result by pruning too..I did same for one of my plant (having single stem) and result was quite satisfactory. Have a video in case you are interested in watching - ruclips.net/video/B3X_e6DbTq8/видео.html
Ficus have dormant buds in each node. Move your tree outside in the summer and it will usually backbud without much fuss. The reason rubber trees get leggy is we starve them for light by keeping them inside.
Agree
Thank you
This is true! I left my rubber leaf on my balcony by mistake but I do not regret it. It started to produce buds in 3 areas
@@romeezydabreeze
Hmmmm ? On your balcony ? Maybe I'll try that . Thanks
Can confirm, I live in a area where we get cold winters, but this summer, I put my rubber fig outside. After letting it adjust to direct sunlight, It started to bud EVERYWHERE on the trunk! I have like 4 new branches now and it produced beautiful big leaves. I can recommend everyone to put their houseplants outside if possible.
Houseplants? More like "winter houseplants".
Thank you. I'm going to try this with my rubber plant. It has nice new leaves but no branching.
Thanks for sharing these valuable informations. The appearance of your sweet baby in the video made me so happy. She is so cute and adorable really I love her. She reminds me of my grand daughter who is now living in Pune. Let God shower His blessings upon her through out her life.
You are most welcome Sir and thank you so much for your kind feedback, really appreciated! Take care and sending lots of good wishes!
Thank you! I always love your videos. You always give clear instructions.
You are most welcome and thank you SO much for your encouraging words, really appreciated!
Thank you very much for this tip!! I'd never come across it before :D
The updates when the new growths were showing were great!!
Glad you liked it and thank you so much for your feedback, appreciated!
That’s a very interesting and very useful tip for avoiding a leggy plant, thank you very much.
Very excited to try this technique on a plant. My father-in-law gave me many many years ago. It has many branches, but very few leaves.
Im gonna try this. My elastica has not grown at all since i got it last summer. Now it has two big leaves that are hanging straight down along side the stem after the other 7 fell off one by one about 1 a month. Thanks so much for this Vidio so glad it came up in my notifications. Have definatly subscribed and nice one for the subtitles. Helps alot.
Even notching and making rings around the stem helps in getting side branches I've done it on all ficus group of plants and was successful. Anyway thanks for your new method.
Yeah, that also works and thank you very much for sharing your experience here, appreciated! Have a you tried the same method (in reverse way) to control the height of the plant? In some plants, we can do that. But haven't tried on Rubber plant yet. Please let me know your experience if you have done.
Notching has never ever worked for me. Ive tried it on three different plants, multiple times, all now 6 feet tall. Nothing! Not even a single bud. The plants are all super healthy though. Gonna try this method starting today.
Thank you for this! I am starting to have results from your pruning technique, it's exciting!!!
♡♡♡
You are most welcome and I am so glad to know about your result, GREAT job indeed! One more thing - I believe you have noticed there was no music in the video..ha ha..did that just for you! Not all time it's possible as lots of constructions works going around here and busy roads nearby..but, whenever possible, I would do it!
Aww, THANK YOU! !! :)
Hi, I am a Japanese fan of your videos. Regards from Tokyo.
Thank you SOOOO much and I am being honored! Happy Gardening 😊
Thanku sooo very much sir iss tarike see mera plant me kai sari new branches aa gye.or achcga grow kar raga hai
It's mindblowing! Thank you for the video, I have a small rubber plant with a soft bendy stem, that would be a fun experiment. And I Iove your accent, you make english sound way more interesting! (Not a native speaker myself)
Thank you! I'm going to do this with my plant 😊
Your garden is beautiful ❤️💐
Thank you so much 😊
Oh my goodness. This man is BRILLIANT!!! And I've just subscribed.
you are so clever about plants ... and i consider you the plant whisperer ( if you saw movie: the horse whisperer)... amazing ideas
I can't wait to try this. What an amazing idea!!
Thank you for this as well as your other videos.
Nature is Amazing! Thank you for sharing!
You are most welcome and thank you so much for your feedback, appreciated!
Great Video and very interesting to make the plant busy. I have a very large plant in a pot outside (Western Australia) lots of sun therefore growing very high with some branches sparse of leaves. Pruning has resulted in more lower leaves, happy with this. My concern is how to keep the plant a reasonable size (currently two (2) meters high) and busy as it a main feature of my entry. Will pruning the top cause the plant to be root bound. Thank you. I enjoy your videos and great advise on rubber plants.
what would be the best fertilizer for rubber plant ? I think you have the best knowledge about this
Thanks a lot for the video.. Helped me a lot in developing lower branches on tulsi plants..
Sorry for the late reply n glad to here it did work for you!
So this has similar aspects in it to Bonsai methods. Makes perfect sense. Have a ? Do you twist the plant the opposite direction to get new growth encourage on they other side so the plant is fairly symmetrical all around or does the plant spout on bottom side that is shaded and then correct its self when you return the plant to the upright position? Hope this ? Makes sense. Thanks 😊
@Debbie Fox, You are 100% correct 😊 Mostly used in Bonsai..and even on Adenium too to force them to produce more branches. Twisting is not necessary..or else the stem might break. Actually, kept the growing point facing west (as there is a wall just behind the plant) This way, it had to produce new growth which can get more light from east side. But anyway, doing exactly same like me is not necessary (like, keeping behind a wall and facing to west). All plants would produce new growth because of their natural growing habit.
If I cut the rope, it would correct itself in coming days. For that, I would just need to make sure that it's getting light from all side. If it's not possible, we can just adjust the location of the plant based on the direction of the light. All plants always bend in case there is a wall behind it and light is coming from other side.
I hope, I have answered your question..if somehow I got it wrong, please let me know. Thank you!
I saw some massive rubber trees in mexico this year and most of the branches actually point downwards but they don’t branch out. So I think you damaged the stem which is causing the growth lower down. Interesting technique though! Are you planning to straighten the plant back up or will you be pruning the top once the new shoots fill in more? I’d love to see an update in a few months. Thanks for sharing
no as this same effect can be had by simply laying the plant on its side
Wow! This is something different! Loved it!
@Rekha Khanal, Glad you liked it and thank you for your words Rekha!
Great video! Is it possible to achieve such results even if the stem still has leafs or should I remove some and then try to bend it? I have my rubber plant for almost 4 years now, unfortunately it has only one stem. Tried your other method last year (by pruning the top part) unfortunately my plant just kept growing as usual, haha.
Glad you liked it and thank you so much for your feedback. Sure, it is possible and please avoid removing the leaves. You can bend the stem without even removing any leaves.
Again, sorry to hear that Pruning didn't work out for you. Normally it does if all goes well (need hard pruning). Anyway, sometimes plants just like to behave in their own way..he he..and don't grow like we want. I have pruned many of my Rubber plants (including the one I have shown in last year's video) again and soon I would share the result. Thank you!
I just tried this method on my verigated rudder plant on 28july iam waiting for the result...At 1st i was so scared to do this for my plant but after reading yoga pose in comments...iam convinced😂
Ya it’s true…amazing. I tried this technique 😊
Thank you so much for your inputs 😀
WOW ! Common sense ! Plants WANT TO GROW UP ! Bet others do this too ! Thanks !!
Wonderful method. Love your suggestions... What I like most is your updates..
Glad you liked it and thank you so much for your words, much appreciated!
Very interesting method! Thank you for sharing! Never seen this before. How much time has passed between each step?
Glad you liked it and thank you so much for your words! I have shown the Timing on the screen (Top-Left corner) like After 35 days..n so on...
Bonsai rubber plant with that wire! Brilliant
my rubber plant's stem is too hard due to being tall already and i need to do the same fix you've explained in this video. for harder stems, what would you recommend? thanks for this informative video.
I had used this technique on my leggy Banyan bonsai, most grew branched & a few areal roots, next I’ll chop off the ends during monsoons to get compact canopy 🤞
That's great to hear that you also tried and it's growing well..All the best with your Bonsai!
Very good informative video ....I killed my rubber plant earlier last summer ....never tried again due to harsh weather here ....very effective tips ...thanks for sharing
Thank you so much for your feedback and sorry to know..Since it's too hot over there, I believe you can grow all these Heat Tolerant plants - ruclips.net/video/7M11juZaJ_8/видео.html
It's an old video and I would try to update the list in coming days, thank you!
Nice video. Real fact. What do you think would happen if we just position the pot horizontally?
Very informative topic,ang ganda ng rubber plant😢
Omg his right tysvm I did this midsummer its fall now and wow too many babies came out
So glad to hear and thank you so much for sharing your experience, AWESOME!
I hope it will work for my rubber plant😍great😍
I’m shocked!! 🤯😳 my plant is very leggy looks just like the first plant I’m so scared to bend it. Once the leaves come in at the lower part of the stem then what do you do untie it and does it straighten back up?
@Mrs. Loya, Please don't get scared to bend the plant..actually, it's quite safer than pruning.
>> Once the leaves come in at the lower part of the stem then what do you do untie it and does it straighten back up?
We just need to simply cut the rope and it would grow like normal plants. But, we can help the plant to do that faster simply providing the light from opposite direction. Means, if the main stem was aiming to the left side, provide more light from the right side (after cutting the rope). Eventually, it would straighten up itself. I would update it soon...Good luck :-)
Awesome video! Can you do this to a Fiddle Fig Tree? If yes, do you have a video for it?
that’s beautiful I had my rubber tree for 4 months no new leaves yet I cut the tip (without the leaf just the tip)at the top part to bloom new leaf,I’m nit sure if I did it right, or should I cut the tip with a leaf also? please let me know if I did the right thing
Very nice information
Thank you very much!
Success !! Thank you so much 👏🏻 so amazed it worked for me
Oh wow, I am in Canada. Would I need to give this plant a grow light to encourage new growth?
Nice! I will definitely try this method.
Wish you all the best :-)
Would you get similar results if you placed a grow light facing the stem where you want leaves to grow without bending the stem?
I was considering this idea, as I'd like it to grow branches all over, not just off one side.
I am sitting here very shocked! But I see it does work!
Tq for this info... allowed me to share this video whit others.😊
Most welcome and thank you so much for doing that, really appreciated 😊
Great technique!🤗
Thanks a lot! Very informative! Though I have a question how to deal with the "opposite" side of tank when we have new multipul growth points on the other side. How to bend and not to damage new growth?
THIS is different! I have never seen this before!
If you want bushier rubber plant simply cut or remove the new growth from the top.. And than see the magic... Tried and tested Successfully.... My tinke fully lush and bushier 🍀🌱🌿💯🙏
Wonderful idea 👍
Very creative! I'll try.
This video is so interesting and informative. I can’t believe how you transformed this plant! Amazing job. So enjoyable to watch. Many thanks! 👏🪴🥰
Glad you liked it and thank you So much for your words, much appreciated!
Hi chandan,good technique.let me also try my hands at it. Tq
Thank you very much :-) Sure, wish you all the best and you can do this with any plants which are leggy!
@@GardeningUpbeat ok
Sir may I ask you question? I have bought rubber plant on line. It was last Dec 11,2022 but only delivered Jan 11,2023. It looks disaster in the box because the rubber plant are already partially rotten due to super wet, i guess because the leaves is already tangle down. Whats left was the 2 stem with very wet small amount of soil that placed in small plastic. What I did is I immediately repot in dry and well draining soil and place it in balcony where no direct exposure of sunlight, 😢 do you think my rubber plant can still grow? Although in the uppermost stem has small leaf that were about to bloom unfortunately sue to the stress inside the box while on transit make lots of leaves fell off.
Very useful video I must try these tips
I follow your idea । It is realy amazing ।
Harika bilgiler çok teşekkür ederim
Beautiful plant Useful information
Great video
Glad you enjoyed it and thank you for your feedback!
Do you think this will work for more hardy plants? I have a leggy curry-leaf tree I would like to try this but I'm scared of killing it
Sure, it would work..but for curry lea plant, you can just prune it. It's Monsoon and so it would grow back fast..wish you all the best!
Thanks for sharing 👍 😊
My pleasure 😊
Thanks for sharing this idea bro❤
You are most welcome and thank you for watching!
Woukd it work to just... place the plant at an angle, without bending it? And once it has new branches on one side, the have it at the opposite angle, to get branches on both side and keep the main trunk growing?
Wow. This is something different idea 👍👌
Glad you liked it and thank you for watching :-)
Thanks for sharing 👍. Happiness in leaf 🍃 vlog
i would love to see more updates on this!
Sure, I would do very soon..thank you :-)
That is amazing well done 👍
Thank you so much 😀
Great stuff!!
Nice presentation
Thanks a lot :-)
Hi Sir. My rubber plant is drooping so I kept it in the sunlight and now it is completely drooped. What should I do?
Just superb
Wonderful, thank you.
Nice concept, I will. Also try it
Thank you and wish you all the best!
thanks for sharing. very informative
You are most welcome :-)