Very nice! How much do you charge to come to my country and build an installation? What percentage of plastic remains as coal, and is it enough to do another burn? Or need coal from several? Can it self power with its own gas? Do you have info on the scrubber? Many thanks
Good job 👍 you have bigger device. But what i see is wasting of heat, so this device can be used for house heater and if you have boiler/tank around it can make warm water for radiators and so on. Another idea is you can use oil again for fire. I mean main purpose of it can be used as heater and plus you are recycling plastic and so on. Very interesting because we have lot of plastic waste on the planet.
I have a fair bit of boiler work experience, if you add hydrochloric acid to your water bath all the rust will turn into ferric chloride it's water sol. And kill mold all mold it is a form of a like plant fungicides. Use the carbon in a slow drip fashion to filter out your oil made a small scale version my self. Use it to run a 85 6.2 diesel truck
Hello sir, I am just wondering about one thing, first of all, we heat the plastic and form the oil. And then you heat the oil separately and create gasoline and diesel fuel?
Tires are vulcanized so there is sulfur in that oil that is very hard to remove unless done industrially. Refining requires you gasify the oil in a very tall condenser with levels, too expensive for a small operation like this.
Hi great video. Can we learn more about your technology? What can you do with oil produced (looks like heavy crude oil) what can you do with coal? Can the coal be used for making charcoal?
@@markyes2041 gasoline, diesel, kerosene, gas edit: yeah refining should be done, but the fuelmixture as is can be used in old diesel tractors, they basically run on every burnable liquid
it's basically just extreme temperatures being applied to the material being pyrolyzed, which breaks down it's molecules into smaller pieces, and it is anaerobic since with the presence of O2 it would combust
@@Cajuu awesome .. so with O2 will be combust so it must be anaerobic to be successful way! Then what about safty and how can i apply this way generaly about solid waste In large quantities estimated tens of tons per day?please!
Basically, plastic is made from the same stuff as gasoline and diesel are made from, so boiling the plastic turns it back into its original state and then you refine it to separate gasoline and diesel from it.. I think its got to do with the temperature and pressure in the chamber and then how you distill it.
dear Andrei. how much fund do you need foe investment? do you know how to purify the oil you get to diesel? can you process MSW in your pyrolisis? if yes, i will invest all the money you need. beside where is your location?
With a very well insulated retort, electricity can be used, hopefully from wind or solar, to heat the biomass and hence have all the products produced by the reactor for use.
i thought maybe use a fresnel lense pointed at the reactor to decrease the fuel needs, as glass won´t deteriorate over time like solar panels and wind mills do. also a peltier element could be used, but for that size you would need a lot of them which isn´t cheap
This device produces a lot of waste carbon black . That might be pure enough to use commercially, but more likely it's not very pure and would require disposal. Using it to start the process seems much more economical. If you have spare wind or solar power, your most economical use of that resource is putting power on the electrical grid assuming you've got access. There the efficiency would be much higher than using it as an input to this sort of process.
I would like to do that project here? how much money would i need to start one and would you be able to help me or partner with me? i have excess of tons of recycle material from A to Z tons. God Bless!
Do you have the drawings and instructions up for sale? I am interested to learn how to make high quality diesel and gasoline, while at the same time reducing garbage going to landfill.
Good day Mr. Kovalov, Greeting you from the Philippines! Are you willing to collaborate with me in introducing or transfer your Technology in our country? I Will try to present your Technology to our city mayor as a solution to our waste problem. Thank you and more power !
Hey leave an email or contact , I would like to talk to you about this type of technology. I Intend to start small power station and produce electricity, from scram tires plastics and wood.
That is a brilliant design, great work.
Amazing! One of the best presentations I’ve seen so far
Good job...
Hope u will find investor for ur project
Really nice! Thank you so much for this video!
I am thoroughly impressed
how much oil do you get per 1 ton of tires?
I hope you become independent financially , you are taking something people throw away, and make it useful again.
That is very impressive. Thanks for sharing!
How many barrels of oil per day does it output?
Good concept !
nice baby
congratulations for this hard hard work
Great job! GOD bless you
do you have technical drawings or plans for the plant as Im interested in oneto heat the swimming pool and provide me with diesel for my small holding
Great Video.👍
Very nice! How much do you charge to come to my country and build an installation? What percentage of plastic remains as coal, and is it enough to do another burn? Or need coal from several? Can it self power with its own gas? Do you have info on the scrubber? Many thanks
great presentation of an ingenious idea to turn waste to useful products, Andril how much can a bigger system cost
Красавчик !!! Все четко сделал!
Hi, thanks fornmaking and sharing this video.
Is there a way I can get in touch with you outside of RUclips ?
Please use a dust mask, that dust is carcinogenic, congrats for your cool project.
Carbon is a form of charcoal...
Good job 👍 you have bigger device. But what i see is wasting of heat, so this device can be used for house heater and if you have boiler/tank around it can make warm water for radiators and so on. Another idea is you can use oil again for fire. I mean main purpose of it can be used as heater and plus you are recycling plastic and so on. Very interesting because we have lot of plastic waste on the planet.
why this oil is black , in other vid they produce clear pink dishel oil
Muy buen trabajo
Hello mister why did you fill water in the catalyst chamber
Very good 👍
Hello, have u tested sub bitiminous and lignite coal?
What do you do with carbon waste?
Cordial saludo, desearía que me pudieras dar 8n asesoría 0ara montar mi propia Planta de pirolisis, gracias
I have a fair bit of boiler work experience, if you add hydrochloric acid to your water bath all the rust will turn into ferric chloride it's water sol. And kill mold all mold it is a form of a like plant fungicides. Use the carbon in a slow drip fashion to filter out your oil made a small scale version my self. Use it to run a 85 6.2 diesel truck
could you share your design for the pyrolysis machine?
Sorry, that was from my abusive ex using my phone. He's no longer here. Can't help you.
Wrong number
@@susanthrapp6154 sorry for the bad experience
Nice! Good ol pyrolysis (gasifier) and synfuel (diesel).
Aaand sulphur to corrode engines ;)
@fivethree0 please, what are the sources of sulfur on the raw material?
how many kg plastic load/what is the volume of retort
If you don’t mind me asking, how profitable is this?
Bravissimo 👍👍👍👍👍👍👋🔥
What is the water on top for?
Controlar la temperatura del reactor
Great video thanks 🙏🏽
Hello sir, I am just wondering about one thing, first of all, we heat the plastic and form the oil.
And then you heat the oil separately and create gasoline and diesel fuel?
Tires are vulcanized so there is sulfur in that oil that is very hard to remove unless done industrially. Refining requires you gasify the oil in a very tall condenser with levels, too expensive for a small operation like this.
thanks for sharing
Сколько масла вы получаете из полной камеры покрышек, господин Ковалов?
Wow, this is great!
Hello Where do I find a plan for each part of this work Thank you
Hi great video. Can we learn more about your technology? What can you do with oil produced (looks like heavy crude oil) what can you do with coal? Can the coal be used for making charcoal?
Yes, just like in the 1800s coal can be converted into gas and tar.
💪💪💪💪
What kind of fuel can we get from burning tires?
heavy fuel oil . with one more stage of refining you get diesel
@@markyes2041 gasoline, diesel, kerosene, gas edit: yeah refining should be done, but the fuelmixture as is can be used in old diesel tractors, they basically run on every burnable liquid
How can I get one like this. Can you make me a machine or do you sell drawings/schematics?
Is there anyway I could reach you so that I learn from you?
evolutionenergy8@gmail.com
Could you explain to me about this way and it without O2?or anarobic? And what about condensere system?please
it's basically just extreme temperatures being applied to the material being pyrolyzed, which breaks down it's molecules into smaller pieces, and it is anaerobic since with the presence of O2 it would combust
@@Cajuu awesome .. so with O2 will be combust so it must be anaerobic to be successful way! Then what about safty and how can i apply this way generaly about solid waste In large quantities estimated tens of tons per day?please!
How do u get diesel and gasoline ?
Basically, plastic is made from the same stuff as gasoline and diesel are made from, so boiling the plastic turns it back into its original state and then you refine it to separate gasoline and diesel from it.. I think its got to do with the temperature and pressure in the chamber and then how you distill it.
Where are you from?
Acid rain machine I'm afraid. Doesnt seem to do anything to address the problems of pyrolosis..
how much oil do you get from 2 tonnes of waste
usally 50% when using only tires as material
What is the type of this oil
Its a mix of many poly substances
where did you get or where can I find how you did the fractionalization process to turn into gasoline/diesel, etc?
hazel chem has a video of turning the crude oil mixture into the different types of gasoline through fractional distillation
dear Andrei. how much fund do you need foe investment? do you know how to purify the oil you get to diesel? can you process MSW in your pyrolisis? if yes, i will invest all the money you need. beside where is your location?
With a very well insulated retort, electricity can be used, hopefully from wind or solar, to heat the biomass and hence have all the products produced by the reactor for use.
i thought maybe use a fresnel lense pointed at the reactor to decrease the fuel needs, as glass won´t deteriorate over time like solar panels and wind mills do. also a peltier element could be used, but for that size you would need a lot of them which isn´t cheap
This device produces a lot of waste carbon black . That might be pure enough to use commercially, but more likely it's not very pure and would require disposal. Using it to start the process seems much more economical. If you have spare wind or solar power, your most economical use of that resource is putting power on the electrical grid assuming you've got access. There the efficiency would be much higher than using it as an input to this sort of process.
great.. the exergy
Different plastics produce different types of oils and acids from their pyrolysis, I won't be putting that in my new truck :)
do you sell the fuels or use it for you ?
Здравствуйте. Как с вами можно связаться?
evolutionenergy8@gmail.com
I would like to do that project here? how much money would i need to start one and would you be able to help me or partner with me? i have excess of tons of recycle material from A to Z tons. God Bless!
Do you have the drawings and instructions up for sale? I am interested to learn how to make high quality diesel and gasoline, while at the same time reducing garbage going to landfill.
fantastic
Oil on the world market is selling for 60.00 a barrel, gasoline and diesel 2.a gallon
in germany we pay 1,50€ per liter thats 5,70€ per gallon thats 6,81$
Good day Mr. Kovalov, Greeting you from the Philippines! Are you willing to collaborate with me in introducing or transfer your Technology in our country? I Will try to present your Technology to our city mayor as a solution to our waste problem. Thank you and more power !
Hello. Write if this is a social project evolutionenergy8@gmail.com
Hi! How is the carbon powder & metal separated?
Carbon is separated by rotating the retort.
I want to build one of these and make bio diesel
for example,retort volume 2 m3. you filled 200 kg plastic.
i love it thank you :D
Why not just convert waste motor oil through distillation in a single run not having to do two distillations
U do this type of operation in of waste recycled oil into various fractions pls reply
Great russian salute u.
0from your text I guessed a price somewhere in the low 4 figures to buildI would like to talk with you in a private forum to disscuss fees ect
Genius
Зачем нам вода, господин Ковалов?
Избыточным теплом греем воду, а вода используется для грибного хозяйства.
@@andriikovalov5792 Спасибо за ваш ответ.
ОГО!!!
Hey leave an email or contact , I would like to talk to you about this type of technology. I Intend to start small power station and produce electricity, from scram tires plastics and wood.
😮
I wouldn't use tires... various plastics and rubbers are toxic and shouldn't be used in Pyrolysis
ill investe i have silver to do that
ill walk around and you guess what im doing. waste of time. talk to us..
Educate yourself fool, before commenting negatively on something a person is doing to assist in teaching humanity