HOW TO MAKE YOUR 3RD GEN TACOMA SEATS MORE COMFORTABLE!!!
HTML-код
- Опубликовано: 15 сен 2024
- Hey guys, in this video I install a set of Front Seat Jackers from Desert Does It, and then install a set of rear spacers.
I felt as if just the front spacers helped 20% with the hamstring numbness, but just gave me a load of back pain. I was much happier when I added the .5" of rear lift to accompany the 1.25" of front lift.
The seats are much more comfortable now, and I love driving the truck again. It is a noticeable difference!
Front Seat Jackers: amzn.to/3cnDHAE
Rear Seat Jackers: amzn.to/3rnV0pt
Links for Filming Gear I use:
-Canon M50 (Camera this video was shot on): amzn.to/2WmGdh...
-Canon EOS R (My main camera): amzn.to/3p2e24...
-Tripod: amzn.to/2Wr5fM...
-Rode Microphone: amzn.to/34lSqb...
-SD Card: amzn.to/2LCTIb...
Links for Camping Gear I use:
-Overhead Camper Light: amzn.to/3kVWzcB
-Coleman Stove: amzn.to/30lXg5D
-Portable Light: amzn.to/2O8NfpS
-Utensil Kit: amzn.to/3sSR69e
-Solo Stove: amzn.to/38kAyzb
This isn’t a fix all, but I hope it helps someone! At 5’10, it’s been the perfect fix for me.
Update: Just drove 600+ miles (300+ miles straight each time) and I had 0 leg fatigue or back pain! Thank the Lord this fixed it for me.
I hope so iam around the same height I got a 2021 Tacoma I love the truck but the seat is killing me I wanna give this a chance before I give up on the tacoma
@@Moneyguidelines I ended up giving up on my Tacoma after I just couldn't get fully comfortable in it on longer trips. Bought a Ram 2500 and have never been happier.
@@socalexpeditions I kinda wanna stay around the smaller size I don't need truck that big don't even really need a full size truck kinda thinking about the new frontier down the line ik it's Nissan their seats are just on point
@@Moneyguidelines Wait for the new hybrid stuff to come out. The new Tundra looks great (but expensive). Fronteirs are very nice too, they are quiet and smooth
I tried these in my 2012 DCSB. I liked them initially but ended up returning because i didnt like how high the seat was and how the back rest and angled. I’m 6’1” and the spacers put my head up to the headliner. Their customer service was top notch and I wouldn’t hesitate to suggest these to anyone (just because they didnt work for me doesnt mean others wont love them).
These Desert Does It spacers are fantastic - pricey but fantastic. I have a 1 1/4
' lift for the front and a 1/4 inch lift on the back - all purchased from Dessert Does It. I would squirm in the seat trying to get comfortable before these spacers were installed and found that after installation - and landing on the right combo - I did not squirm to get comfortable. These are terrific. I cannot recommend them highly enough.
I’ve got spacers in the rear only and it made a HUGE difference for me. I’m 5’10” and it made all the difference in the world!
So these can be used for front and or back of the seat?
@@jollypearltank8935you can't use the front ones for rear. There are cheaper options for rear side, they are just round with a hole.
I tried the front jackers and 1inch rear jackers. The front side seems too high for me. I will try only keep the rear and see if it helps. I hope it helps.
Got a taco couple years ago. Loved the truck but after a week the seats caused me back problem this was the last resort before I sold it. I'm happy to say this solved my problem and loving my taco. I'm 5'10 180lbs
Just installed mine last week.. One of My favorite mods
Bro that stache is gnarly!
Those eyebrows too! 😃
Thanks brotha and I love my eyebrows (; I’ll never run out
I used these on my 4th gen 4Runner and it was night and day better for highway driving and comfort/fatigue, but because the Tacoma’s don’t have tilt adjustment on the seat base, you don’t get much benefit from the front seat jackers only.
I put hockey pucks in the rear. They're exactly 1inch high by 3 inches wide and they fit perfectly. They set exactly right around the rear floor mats also. Cost $2 then get the right length bolts and you're done. Can't even tell they're there. I didn't write doesn the exact bolt measurements but they're 8.8 guage 10mm x 1.50 thread taper I believe. Read it in the tacoma world thread.
We are about the same height 🤙🏼 I ordered these months ago and then left the country for a bit stoked to test them out on the 04 Runner.
agree. i am 5-10 normal build and i found, by doing only the fronts, it moved the discomfort from legs to back. so i am going to try putting 1/2" under the rear positions too. thks!
Did this work for you? I’m having the same issue
I have same issue with my 2019 Tacoma.
Cheers from San Clemente 😎⚡️🤙
Gave me a good idea. I'm 5'9, but the only problem I have with my 19 is the seat leans down in the back. Keep feeling like I'm having to push back to sit higher. Think I'll just add a couple spacers on each side. 👍
I'm also 5"9 and I took 1in spacers and some washers and new industrial bolts that were longer and jacked the back of the seat up. It helped with my back especially on long drives of 8hrs plus and I don't have pain in my low back anymore. Plus you feel like you are actually driving a truck. Did it all for 14 bucks at lowes.
also may add a bit of space for a small sealed sub box, or amp(s). mounting anything behind the rear seats is a major PITA.
They are good for skinny legged people. Not for stocky people with shorter legs, unless you want to drive hands free and just use the tops of your legs. Tried on a 2021 Tacoma. The video presentation was good.
No need to apologize about the dirty truck , I’m sure we’ve all seen worse 😅, good honest review 👌
I got a new Trail Edition, I have no issue, but I think it’s because they are power seats, I lift the front up and sit back like a bucket seat
Great video with a great explanation of how they actually feel after installing them, keep up the good work bro
Bijan, I fabbed a set of these AND 1" risers for the rear when I had my '12 Tacoma. It made a huge difference, especially on long drives(like IL > CA). The stock position was so painful after just one hour on the highway.
can you make these for cheaper than $110
true that! Com'on Toyota!
There are spacers available in 3 different sizes for the rear seat legs that make this upgrade actually work.
Yer could always add a stack of washers , that way you can adjust the height….good video
I think l am now the current owner of your truck. For real! Nice video too.
That’s awesome! I took great care of it, enjoy it!
@@socalexpeditions I live in Monterey County. Just hit 60,000 miles. All mods still in place. It’s a good truck. Horrible on gas. lol!!
@@troypenrose3666 Yup! That would be the truck…and yes, it’s not gas friendly 😂 At least it has 5.29 gears and a tune!
Awesome, thanks man! I'm 5'6" and my 2023 KILLS my back on any drives over 1 hour, seems as though the seats are intentially jacked up, tilted backwards, very low and cause me major pains when driving long distances. Maybe I'll try rear spacers first to at least get the seat LEVEL and then I can look at going up, at 5'6", I see LOTS of the front hood, need a phone book I guess 🙂
Give it a shot!
Half inch rear spacers?
So why wouldn't you just raise the front less? By adding height to the back that's what you've effectively done, right?
@@greenergolf There’s no seat jackers to raise the front less.
Makes it even harder to squeeze in there... Best way to make it more comfortable is to trade it for a full size
With the rear spacers at 1/2" did you have to replace the bolt and get a longer one? Or did it still have enough thread?
I’m short and the 20+ models have the power seat so that helps
Doesn't this affect your warranty and if not done properly with the reinstall can possibly kill someone?
I don’t know what warranty you’d be affecting. And torque to spec with loctite, just like it’s done at the manufacturer.
Happy You 'solved' Your 'Seat Issue'!!!!...just wondering ....peeps say the 3rd Gen. Taco..has 'Tranny issue's'...( issue: meaning...seems to never be in the 'right' gear for accelerating on ramp to interstate...or downshifting as well.?? )..Do you have any 'comments...or input on this? ..really considering a TACO...but just concerned about this 'Problem'. p.s. you have The COOLEST TACO!!!...Safe Travels Man!!....cheers Thanks from Canada....
Get the latest TSB update and an OVTune to fix that issue
@@socalexpeditions ..cheers!
I’d assume those white pin covers would go on the block pins (between the floor pan and the pin) since the pins on the blocks are the same as the seat base pins.
Also they tell you not the to torque the blocks right away because you’re meant to just double check alignment.
Ok, so I installed my set after watching this video and the white plastic cover doesn’t fit the roll pin on the blocks. ✌🏻
As some who drives this truck daily for about 20 miles (with a manual transmission), I must say watching this video on April fools is very confusing. Hope everyone in the comments section turns out okay!
Did the black seat rail covers fit back on?
Yes, there’ll be a small gap depending on how many washers you add.
There are taller seat jackers for the rear. You should try those.
Overall, Agreed! These seats and position sucks
Tacoma has such a short bottom seat front to back compared to some vehicles. It’s rough. I wonder if the power seat is any better
I have a power seat. Not comfy at all
Great video
'13 Taco here and I feel your pain man, literally. I have a Washington to Wisconsin trip coming up soon so I was not looking forward to it until now. Just to clarify, you put 4 rear spacers on each seat, TWO stacked? Thanks for the vid my dude!
The front is raised by the seat jackers 1.25". Each rear bolt is raised by two washers that are .25" each. So the rear is lifted .5". Two washers under each bolt for the rear. Hope it helps man - I drove 5 hours straight with not a single pain and I cried of joy.
I'd prefer to lift the back of the front seats
Great if you’re 5’9 or under.
Anyone know if this would fit a Scion TC?
I would not guarantee it. You could technically buy machined spacers (and/or washers) to lift up your seats with longer bolts - But in no way would I want to be responsible if the spacers caused the bolts to fail in an accident.
Ehhhh.... I’m still skeptical about these seat jackers. Plus messing with how and where the seat bolts to the truck just seems like a bad idea. How and where the seat attaches to the truck has been crash rated and approved and I don’t think the people selling or making these have done that. I would be curious also about insurance after an accident this seems like something they could use to dismiss any pay out to cover medical since you have modified a safety feature or the truck. Just my opinion on these though.
I think it’s completely fine as long as you torque to spec (and use loctite), use grade 10 hardware, and don’t cheap out. That being said, I’m not responsible for anyones troubles if they cause an issue in an accident. I’ve done way more sketchy stuff than rising my seat and torquing it to spec in my life! 😂
You need the back leg spacers to raise the seat higher then you will feel it better.
Did you watch the end of the video?
I bought these and installed them. They feel way different at first but, after a long drive, I personally still experience the discomfort. By long drive I mean my 30-35 min drive to work every day. Very disappointed in these Tacoma seats.
Did you do spacers under the back of the seat too?
Add .5” rear
Been wanting a Tacoma for a while now after selling my 01 4runner for a commuter vehicle. But after researching these 3rd gen's, I'm not sure I do anymore. The seats, underwhelming power, lackadaisical transmissions.....these are things that shouldn't be associated with Toyota, or a $45k vehicle. What's your experience with the transmission? Any issues?
I have gears and my truck is turned, but I will not be buying another Tacoma after this one
Its just a sellers market right now. 16 and 17 are the years to avoid. Coolant and timing cover leaks. I got my 18 a year ago and have zero complaints. There are updates to ECU for the transmission now. I also paid 31k out the door for my OR with 27k miles at the time. I love it.
@@socalexpeditions why not? I just traded in my jkur for a trd pro and just got an ov tune done and it’s a whole different animal. Actually enjoy driving it now. Haha
@@TheRealMatteo45 Do gears, it'll be even better. The Tacoma lacks power once you add weight to it. It'll just average 13mpg and be a dog everywhere. I really like having a bigger truck with more power
@@socalexpeditions I’m getting about 16-18 right now so not complaining haha. My jkur got 12 😂
How in the world Toyota can’t figure out the way to make their seats comfortable. I have a MB GLK and even though it’s nowhere near close to Tacoma’s reliability the seats in GLK is super comfortable regardless if you drive for a few hours or you going coast to coast.
The white plastic things go in the holes in the floor not on the guide pins.
Okay, try and slide it over the spacers guide pin and put it into the floor and let me know how it works out!
Hell that just makes it harder to get in the truck. They suck I took them out !
I don’t think they don’t suck. I think you just suck at getting in your truck.
This dude has three mustaches.
That you know of
First!! 😎
1 click and done, no more. Never used one before?
All the time but the sound is satisfying, so who cares.
Gonna wait for some Chinese knockoff!
I mean I guess lol
Well we don't want them slaving away for nothing lol
if you Taco came with electronic seat control, this is not a problem, you can adjust it several ways as you want. You get what you paid for..
I’ve sat in many Tacomas with electronic seats and they still dont have enough range of motion to be comfortable haha
Wrong
There is no need for the front spacers. Honestly, buying a 1'' spacer from a hardware store and a longer bolt (make sure its stout) for the back will improve the seating position and does not interfere with head room, plus it's a lot cheaper. Do this at your own risk.
damn i want these cause im 6'1 but $110 thats kind of a lot lol
I feel you man, look for cheaper options on TacomaWorld. Try stacking some rear washers first.
Wow dude your mustache and brows are so thick, I have thick eye brows but i can barely grow facial hair
I feel bad for all you who bought this truck.
For as many people who have this problem, you’d think Toyota would fix this.
This is one reason I went with a Tundra instead of the Tacoma. The Tacoma seats are not high enough and are very uncomfortable.
Looks like you dye you eyebrow and mustache 🤣
Nope all natural 🤌🏽
I thought trucks were illegal in California
Nope, just freedom
maybe the problem is your legs are the size of 2 noodles bro u need to hit the gym consistently lol
Well I’m a marathon runner that weighs 137lbs at 8.2% BF and can bench 225 and deadlift 305. I’m doing okay 😜
Why does your Stach and eyebrows look painted on ?
Not sure, thank you for your positive comment
102$ ? Overpriced
Yup I agree with you
I feel like what’s needed is a longer seat for Americans. I really don’t see how that helps in anyway.
Rather than adding rear seat jackets why don’t they just make the front shorter.
Cause you can’t do that without cutting the seat bracket and rewelding it…