Another good trick is to put reflective tin tape on the outside of the recoil, helps to reflect the heat from the exhaust and keeps the parts inside from wearing down as quick
well my skidoo 600 RS 2009 pullstart is hanging on buy metal wire... the last owner crossthreaded three off the hole's in the engien mount. ohh well it still coes like a cannon! awesome vids keep it up! i hafe been watching for 2-3 years now since the REv biuld and it never gets old!
I have a 2004 bombardier Quest Max 650. The pull start was never installed from the factory. I'm going to need the entire assembly. Does anyone have a link to that?
I pulled my recoil on my sled I have a formula z 583 and the third time I pulled it my cord came out and didn't go back in I checked it my spring is fine my cord still won't go back in
I have an aftermarket starter recoil kit on my 2007 Summit 800 Adrenaline. Works great when it's cold. But after the sled has been running and it's hot it skips like crazy when I go to restart. Why? Is there a fix for this issue!?
In 2016 I bought a new ski doo mxz 600 carb for my son thinking I wouldn't have to work on it .Less than 1000 miles on it and the rewind starter blew up and shut Snowmachine off.I took the rewind starter off and there are plastic and metal fragments all ground up between the flywheel and stater .What kind of stuff are BRP building?
hoping you can help my gsx ho wants to go into reverse sa it fires ????? we were doing top end and noticed loose magnets on the flywheel. we replaced flywheel . im thinking this may have contributed to top end damage idk
Do you have a video of showing how to get in and replace this part. My 2004 MXZ Adrenaline pull cord just went. Spring is good because it pulls the cord back, but it wont catch to start the engine. Thanks!
Hey Louis, I have been looking into doing some upgrades to my rev do you still think these old sleds are worth their while? The particular upgrades I am looking at I could easily sell the sled and get an xp in place of it. Thanks
Another good trick is to put reflective tin tape on the outside of the recoil, helps to reflect the heat from the exhaust and keeps the parts inside from wearing down as quick
well my skidoo 600 RS 2009 pullstart is hanging on buy metal wire... the last owner crossthreaded three off the hole's in the engien mount. ohh well it still coes like a cannon! awesome vids keep it up! i hafe been watching for 2-3 years now since the REv biuld and it never gets old!
Just wanted to know how well this mod has held up and if you’ve had any issues after
Great mod, plenty of room. I wish I could do that for my air cooled 550, gear goes through housing.
Your vids are great.
Could drill the center n use a nylon locking bolt and a cpl washers to hold it together
I Love your videos brother
It ain't snowmobiling unless your seat smells like ass!!!
lol
I have a 2004 bombardier Quest Max 650. The pull start was never installed from the factory. I'm going to need the entire assembly. Does anyone have a link to that?
I have a 95 summit 583 rotax and its so hard to pull. Can you switch out a 97 recoil assembly to make it easier to pull?. If so how do you do it
Profit by design? And what a cool fix.... Simple! Cheap! How much was the stater?
Does cobra cord work on a 01 Mxz 600
I pulled my recoil on my sled I have a formula z 583 and the third time I pulled it my cord came out and didn't go back in I checked it my spring is fine my cord still won't go back in
I have an aftermarket starter recoil kit on my 2007 Summit 800 Adrenaline. Works great when it's cold. But after the sled has been running and it's hot it skips like crazy when I go to restart. Why? Is there a fix for this issue!?
In 2016 I bought a new ski doo mxz 600 carb for my son thinking I wouldn't have to work on it .Less than 1000 miles on it and the rewind starter blew up and shut Snowmachine off.I took the rewind starter off and there are plastic and metal fragments all ground up between the flywheel and stater .What kind of stuff are BRP building?
Destiny718 2 pretty crazy right...I've had that happen 4 times all in the worst places
Destiny718 2 same thing just happened to me tofay
hoping you can help
my gsx ho wants to go into reverse sa it fires ????? we were doing top end and noticed loose magnets on the flywheel. we replaced flywheel . im thinking this may have contributed to top end damage
idk
Do you have a video of showing how to get in and replace this part. My 2004 MXZ Adrenaline pull cord just went. Spring is good because it pulls the cord back, but it wont catch to start the engine. Thanks!
Mumdawg21 parts are 5 dollars it's not hard, plenty of vids,I did my formula 3 in 15 minutes
i like useing those pro armor tethers they dont rip out easy unless you fall off try them
+Tyler Strieter I use those on my Atv but not sure how the clip would do in the cold, i feel like it would break easy no?
Nope there actually by far best product i think for tethers ive fallen off many times and its held up mount right on the bars
I even have them on my stock sleds just throw the key away lol
Thanks for the vid louis
The pawl is a huge weakness on those reminds buy an aluminum billet one !! Problem solved
you need to get the aluminum one.
josh obrien A friend of mine got the aluminium one, it worked until his sled got warm then it stopped again... :/
Hi Louis, are you able to tell me if the pawl kit is different between the 247 single and the 248 twin? Are they the same part number?
Pretty sure they are the same
Will that locking washer always shut the machine down? Cause i can’t even find it! I have not removed the back plate though.
It'll make it's way into something important
How do I get it out???
do 2006 Mach zs have these recoils
Is that for most models of newer skidoos? I have a 03 rev 800, never had a problem with it.
+nathan harland I have an 02 800 and a 500 and never had a problem with either of them
@@dooformuladlx super old comment but my 02 800 x package just obliterated 2 brand new ones lmao
what is recomended for lube? looks like yours has white stuff on it
i just used white grease
Hey Louis, I have been looking into doing some upgrades to my rev do you still think these old sleds are worth their while? The particular upgrades I am looking at I could easily sell the sled and get an xp in place of it. Thanks
if you can afford the xp and do some mods go for it. big bore first!
Why would u put a ski doo engine in a Polaris
Straight A Head Riders yeah put a Yamaha motor in it
What brands of aftermarket recoil parts are there. I don't want to use theirs
How do I get it out??
Remove the flywheel and rotor.
OMG, such amazingly crappy OEM design. Great solution for a stupid problem that shouldn't exist in the firstplace!
Anyone looking to buy a rev?
Fuck off no one wants ur stupid rev u dumb bitch.
First
+Dan O'Connor 400th
Some typical Crappy European engineering there
Aren't they all designed and built in Canada?