Thanks mate, I enjoyed that. I’m a tradesman sheet metal worker and have been for years. I’m just getting into doing some automotive panel stuff now though. Keep up the good work 👍
Just starter a Rat Bike/Pit Bike Junior Chopper (inspired by yours) so now I need one of these bad boys to make the tank and rear fender! Thanks for sharing your knowledge!
Love your videos, I'm in process of making my own English wheel as I need to make a few panels. The main one is the rear deck that is about 5ft long by 4 ft wide which I need just a slight contour on of about 1 cm side to side but the length is far more contoured, any ideas on how to go about making this, Cheers, jeff.
If your trying to ball on a budget the harbor freight central machinery English wheel isn't bad. But he did do some gussets on it which made it better. I made a few fenders with it. My dads made alot of stuff with it. Think he gave $250 for it with a coupon.
Great video. Quick question that I’m sure you already answered somewhere. Are the goose headers just normal stock replacement shorties that you turned around and swapped sides?
The Fab Forums Good too know thanks. I have a blow through procharger 4 eyed fox that I’m board with and thinking of twin turbos since I have QT carb, regulator, fuel pump, ignition, and intercooler already. I have a set of stainless shorty equal length headers that I was thinking of using Love your videos and your inspirational quotes.
what happens if you over stretch the area, how do you shrink it back down ? Also , are there any tricks to holding a larger panel like a door skin if you don't have someone to help? ie can you use an extension table to support the metal on the on the side ?
its rendered all the way to 1080...youtube just starts them at the bottom. So you watch shortly after I post you only get the low res. I would bet if you watched it now 1080 would be available.
My girlfriend has a deeper throat depth. But for real she does. She modified her English wheel to have a deeper throat depth. Oh, also her throat can take a 10 incher lol
thinks for your time and work to produce videos i injoy watching helps me be at ease with not being able to by watching and injoying other builds
You’re very well educated on metal fab. I love how informative you are! Keep em coming.
Very cool, one of the few pieces of equipment I have never used, would like to have one for transmission tunnels. Great video!
Good to see you back in the shop 👍👍👍
Fantastic explanation.
Thank you for the education. :-)
Thanks mate, I enjoyed that. I’m a tradesman sheet metal worker and have been for years. I’m just getting into doing some automotive panel stuff now though. Keep up the good work 👍
Great Video Kyle! informative for sure! Thanks for letting everyone know where to get a MetalAce wheel!
Thanks...no problem
I've just bought one, so find it really interesting and informative
Just starter a Rat Bike/Pit Bike Junior Chopper (inspired by yours) so now I need one of these bad boys to make the tank and rear fender! Thanks for sharing your knowledge!
right on !
Great explanation of a badass tool. Band method never seen before. Thanks.
thanks
@fatback
He did a vid about 4mos ago on this that is good.
Very well said and I like how you put this together. Simple and easy to follow along 👌
thanks
Great "How To" video Kyle! Thank you!
no problem....glad you dig it
Can't wait for videos in the new shop🔥🔥
meeee toooo
Thanks for making the time to make this video! Would like to see more demos 🙏🙏🙏🙏
will do
Perfect explanation for a beginner. I learned a lot! Subscribing. Thanks!
Thanks for the knowledge.
no problem
Really nice educational video!
Thank you for your video
Hey , bro. Hope everyone is doing well ! Videos looking good ! Keep up the good work !
thanks
That's a great video 👍
thanks
Thank you. That was very helpful.
no problem
Very well done sir
thanks
GREAT!
NICE!
Hell yeah man!
Thanks 👍👍
Love your videos, I'm in process of making my own English wheel as I need to make a few panels. The main one is the rear deck that is about 5ft long by 4 ft wide which I need just a slight contour on of about 1 cm side to side but the length is far more contoured, any ideas on how to go about making this, Cheers, jeff.
Cool video 👍
thanks
If your trying to ball on a budget the harbor freight central machinery English wheel isn't bad. But he did do some gussets on it which made it better. I made a few fenders with it. My dads made alot of stuff with it. Think he gave $250 for it with a coupon.
WHAT??😔😔😔😔😔,,, NO "GO DO WORK SON" ????? Hahaha, Coooll Stuff Kyle, thanks n God Bless All
thanks
Cool as
Great video. Quick question that I’m sure you already answered somewhere. Are the goose headers just normal stock replacement shorties that you turned around and swapped sides?
they are....they are some stainless shorties that I just welded some v bands too.
I am actually using the same ones on the Bibbster as well
The Fab Forums
Good too know thanks. I have a blow through procharger 4 eyed fox that I’m board with and thinking of twin turbos since I have QT carb, regulator, fuel pump, ignition, and intercooler already.
I have a set of stainless shorty equal length headers that I was thinking of using
Love your videos and your inspirational quotes.
What are you putting on the fox so it doesn’t rust
I've used the planishing hamer 1st than cleaned it up with the English wheel it will take out the hammer marks
10:44 you stretch the metal and it goes longer and fatter? i think you missed it. still nice job. love your videos.
what happens if you over stretch the area, how do you shrink it back down ?
Also , are there any tricks to holding a larger panel like a door skin if you don't have someone to help? ie can you use an extension table to support the metal on the on the side ?
there are ways to shrink but it isnt easy...best advice is to just take it slow
I have a dumb question: can this machine be use to repair a small dented satellite dish ?
Thank you
yeah
👍👍👍👍👍
Where can you get the rubber band from?
19:32 I hear:"yeah boy yeah boy..."
Vid is only in 360p quality ??
its rendered all the way to 1080...youtube just starts them at the bottom. So you watch shortly after I post you only get the low res. I would bet if you watched it now 1080 would be available.
Not supposed to lube it causes slip
you want slip...it allows it to stretch easier
My girlfriend has a deeper throat depth. But for real she does. She modified her English wheel to have a deeper throat depth. Oh, also her throat can take a 10 incher lol
I bet she don't use WD40 , lol.