Mazda 6 FN4AEL / Ford 4F27E Auto Transmission Rebuild Overhaul 2 of 3
HTML-код
- Опубликовано: 21 авг 2024
- FN4AEL Mazda / 4F27E Ford Auto Transmission Rebuild
Mazda FS5A-EL 2002-2014 - 5-speed version of FN4A-EL, also used in Ford Focus/Milan 2006 - 2009 known as FNR5
Part 1 of 3 • Mazda 6 FN4AEL / Ford ...
Part 2 of 3 • Mazda 6 FN4AEL / Ford ...
Part 3 of 3 • Mazda FN4AEL / Ford 4F...
Original Fault was No Reverse, No 3rd Gear and slipping and No 4th Gear. Servo Piston Pin Bore in case showed not worn at all.
#transmission #gearbox #autorepair #automatictransmission #diy #tutorial #howto #yepthatsit
Hi, if a YepThatsIt Video has helped you out in ANY way or saved you some $$$, please consider helping SUPPORT and motivate us to make more.
BUY ME A BEER ! CLICK HERE www.paypal.me/...
For more technical questions, we can share pics/info/vids/beers via our facebook link / yep-thats-it-103051017...
* If you like our videos PLEASE LIKE, SHARE & SUBSCRIBE to encourage us to continue to make videos....much appreciated !
If you don`t like them PLEASE recommend them to your enemies !
Don't forget to also hit the bell icon ( top right ) for ALL notifications. RUclips has changed what they show subscribers
Ford Fiesta MK7 (2008-2012) 1.4L & 1.5L Duratec engine (Ti-VCT)
Ford EcoSport with 2.0L Duratec engine
Ford Focus 2000-2011
Ford Transit Connect with 2.0L Duratec engine 2010-2013
Mazda2
Mazda3
Mazda5
Mazda6
Mazda CX-7
Mazda Verisa
ewffiHwh3792wyp9y2yr723#%%&%ÊADG$^^$$^#$%^$%&
thank you very much
you are welcome. cheers
thank you so very much for the methodical, thorough, and detail 3 video's. do you think FN4A-EL components are exchengable with 4F27E such as selonodes, differencial, sun gears.. etc?
hi, there are some interchangeable and some are not. cheers
Have you ever had any issue removing the planetary gear? Tried using needle nose pliers to wiggle and pull straight out but it appears stuck.
hi, havent really had trouble on these trans. im not sure. let us know how you g. cheers
Hi, I have a fault during reverse but only when the car is already hot, it enters with force or it simply does not work, after rolling about 10 miles, could you give me an indication, the other gears work perfectly and smoothly but only foward.
without any fault code.
Ford Focus ZTS with 4F27E.
hi, check shift b solenoid next to filter pickup port...also sounds like internal pressure leak. gets worse when fluid gets hot and thins out. you can do a line pressure test. the sealing rings for the reverse clutch are probably worn and/or leaking. you can remove most componenets while trans is still in car, all except forward clutch and torque converter. see my other vids.
cheers
@@YepThatsIt hi. I got like a round flat bearing. Had 4 bumps or legs. Where doe it goes? Thanks
[
please, I have Another cuestion.
When remove all the bolts, the gearbos come out? or I need lose another think??
What about the Torque converter?
Many thanks again. You video help me so much to repair my gearbox. Mazda 3 2008.
if trans is still in vehicle, you will need to remove torque converter bolts from the drive plate that is bolted to the crankshaft. sounds like you haven`t removed the torque converter bolts, so the inspection/access plate may be the thing still holding together. cheers
and hopefully you have removed the cv shafts that drive wheels !
Ohhh... I understeand... if remove all the bolts... dont come out if i dont remove the screws in the torque converter firts??
unbolt torque converter bolts and remove transmission together with torque converter pushed into transmission, all as one unit. if you leave torque converter attached to drive plate you will not have enough room to remove transmission ( bell housing will not be able to move around torque converter ). if you have motor and transmission completely removed from vehicle then it wont matter for removal. however, when you are putting it back make sure torque converter is in the transmission and pump drive slots/lugs, input splines and stator splines are all meshed in properly. when you bolt the transmission back to motor, the torque converter MUST be free to spin and move back & forward a little when you have bolted the bell housing back up, if it doesn`t, that means some of the above mentioned are not meshed in. hope that helps and makes sense cheers
@@YepThatsIt many thanks my friend, now see more clearly. I let you know when remove it. 😊 thanks again my friend.
Hi. Great video...please, can uou tell me. How many bolts between the engine and the gearbox???
hi, usually around 6 bolts on trans bell housing to motor, 2 or 3 bolts on starter motor, and 3-5 bolts on torque converter. hope that helps cheers
@@YepThatsIt Thanks my friend...
I try to separate the gearbox from the motor, but still glued haha...I can't find all the bolts... Y try again tomorrow. many Thanks. your channel is great!!
How hard is it to rebuild at home a 4F27E on a 2006 mazda 3s automatic with a rebuild kit from online ? ive done timing chains / lifters / valve stems / transmission valve bodies scale 1 thru 10 10 being hardest
hi, there is always a first time, 2nd & 3rd will always be easier. cheerss
Do you know how to fix p0730 incorrect gear ratio? Thank you
hi, usually worn trans, internal pressure leaks. check fluid level as well as all the basics first though, then drop the trans pan and decide next steps. sorry hard to say without having a look or more info. good luck cheers
Hey I have a 2006 mazda 6s and it is giving p0722 output speed sensor code. Is it possible to change the sensor on the car
hi, first check that it hasn`t just attracted fine metallic swarf/debris and check electrical connection. cheers
@@YepThatsIt I have changed fluids twice. I heard the sensor is in the transmission body
@@thekingmclean1923 i`d think they are on outside. usually have just one bolt holding them...follow the wires. cheers
I could really use your help if there's any way you could possibly contact me I have a 06 Mazda 6s V6 3.0 six-speed automatic Mazda or nobody could figure out my problem I have my transmission flushed buy Mazda also had at ECM PCM and TCM reflashed it is still slamming from 3rd to 4th but now the problem nobody could figure out is operating temperature when I check the transmission fluid sometimes is that the right level and then the craziest thing happened when I cycle through the gears and check it again the transmission fluid is literally gone when I shut the car off started back up transmission fluids is back what the heck is going on nobody could answer and nobody seen it before
hi, you could have internal pressure leak causing fluid to be aerated and give false level reading. cheers
Can you tell me which clutch packs engage to give 4th gear in fn4ael
hi, all that info is contained in video...2-4 band and direct clutch ( the smaller outer clutch pack ) on mazda solenoid SSA & SSD are on ( ford call same solenoids by SSC & SSA respectively ). cheers
@@YepThatsIt does that means the ssa solenoid is for the servo and sdd solenoid is for the reverse clutches in the 4 drum. My car doesnt give me fourth.
That should be 3 4 drum.
hi, any fault codes present? also you can air pressure test clutches and band with valve body out. may be worth doing an oil pressure test before you take out valve body. cheers
@@YepThatsIt so far I can't find someone with an adapter to read fault codes on the vehicle. They only have adapter for the more recent cars. My car is a 2000 Mazda familia
ayudame con dtc po733 mazda 3
hi, incorrect ratio ( slipping ), always check basic first with fluid level. cheers
Ive got a mazda 323 and mine is flaring going form 2nd to 3rd only on the up shit