How to INSTALL 2 INCH LIFT KIT to a LANDCRUISER PRADO 120 | MODIFIED | DIY | BACKYARD MECHANIC
HTML-код
- Опубликовано: 9 окт 2021
- Hey Guys, after saving some cash for a long awaited time finally I made it to modified my PRADO.
THANK YOU FOR WATCHING.
#Australia
Ayos lods ganda ng tayo lods after ma palitan ng mga shock absorber.. Well done,, 👍👍👍
Congratulations! Looks great! I like the white lettering on the wheels to go with the white exterior
Great job mate, you make it look like a walk in the park. I just ordered a 2 inch kit for my prado, 🤞 I wont have any problems putting it on
Too easy mate...
Lookin great mate.
Mate another top video, you showed us how to fit the snorkel, now the lift, thanks mate..
Thanks mate
That sense of humor of yours makes your video enjoyable...unique...and fun...spot on!!! HOLY SPIRIT bless you 🙏
Thank you
Great work man I enjoyed it thanks for filming and updoading my friend 👏👏👏👏👏👏👏👏👏👏👏👏👏👏🙏🙏🙏🙏🙏
Good job friend 👍🏻 your Prado looks great !
Thanks mate
looks good kababayan! im also turning my prado 120 to a touring rig, tuning in to your channel for some prado info. 👌🏼
Thank you kabayan, plano ko palitan ng 3" exhaust pipe itong prdo ko.
Looking good, Sir 👍🏽
Thank you sir
What a beauty .
HAHA
I’m pretty sure once you’re all done you’re only supposed to do bolts up hand tight, then lower it to the ground with full weight on all 4 wheels before torquing up properly. You can prematurely wear out the bushes on your shocks, sway bar links & panhard rod I’m lead to believe if everything is tightened too much prior to dropping the car. Great video though, I enjoyed it.
All you have said is correct, but I did not replace any bushes and they were all need to replace soon. You must be a mechanic too.
Mate just love your video's well done
Thanks mate
Ang angas na👌👊
Thanks bro 🙏
Thank you mr. 💪
Great video👍.
Glad you enjoyed it
I agree on all points except that I don't have a turbo on my model
Hi, Salamat sa information. What's the brand of the coil and suspension you are using? I also have a 2002 Prado 120 series in the Philippines with Iron man suspension but I need it lifted to be able to use a bigger tire. Thanks again.
Good video ( i have a 2007 GXL Prado 120 4ltr and will be doing the same) its been asked but you have not answered - what width are your rims? we know you say offset is neg 10 but what is the actual width of the rims? are they 9inch/ 10inch for example ( i do know 17 x 9inch width works best with zero offset on the 120 Prado). Also what aftermarlet airbag brand/part # did you use?
My Prado is black and i have swapped out the front headlights with black binnacles/LED and swapped out the rear taillights complete assembly with LED's. Also fitted and Harrop E locker to rear diff & dual battery system/redark BCDC with rear slide-out draws & drop down table. These 120's are awesome 4wd's when you upgrade them
👍👍👍👍👍👍
Thanks for the video? What you think does the wheel aligmnent need to be adjusted after lifting car this much? I am thinking the angle of the wheel might change.
Yes, wheel alignment is required. Thanks for your comment.
Good Day Kabayan.. Ganda ng Prado mo.. Prado owner din ako Prado V6 4.0 Brisbane base po ako..
G'day bro, mas mataas ang horsepower ng V6 mo. Ok nman wala akong complain dito sa prado ko.
@@gooddayvlogs23 Oo mataas kasing taas ng presyo ng petrol ngayon hehehehe.. Pero happy kasi very comfy at malaki space ng Prado
@@papaandnanakvlog9739 haha tama ka bro, tsaka di pahuhuli ang porma nya kahit katabi nya late models suv sa ngayon pasok pa rin sa panlasa.
@@gooddayvlogs23 Tama.. daming gusto bilhin Prado ko pero ayaw ko kasi napa mahal na sa akin.. hindi kami binigyan ng sakit ng ulo..
Congratulations man, I'm going to show your video to my mechanic to put the same kit on my Prodo in France. Could you please indicate the part number and the constructor of the kit. I have been told that in Australia they are the best
It's a Pedders brand, you have to buy a kit. Part number is Pedders 7839, it depends on what ratings you wanted, how much load you carry. You have to buy an airbags and fit inside the rear coil springs. Thank you
Great job mate.....English is awesome.....So no other mods to brake lines or diff drop kit etc?
Thanks mate, no other mods on 2 inch lift kit.
Thank you for your answer. By the way, my engine is a 3.0L atmospheric 6-cylinder. 2004 (201TKM) well maintained and it has no particular problem except that it's sorely lacking in punch at medium and high revs. Is there a remedy for this which we could apply.
Use Toyota injector cleaner, replace your air filter with K&E performance filter, clean your intake manifold and turbo intercooler, replace your exhaust pipe with 3 inches from turbo back up to tail pipe.
Looks the goods mate, just wondering what wheel psecs you are running in the end with black steelies, ive just lifted mine chasing some wheels now
They're 275/70R17 rims with negative 10 offset. It fits very good mate
Thanking you much appreciated the reply
All good mate
Is this the exact same or very smilies to a Prado 90’s suspension ? They both haha live rear coil and front ifs so it’d be the same right?
Correct
May i ask what the comfort is like on the front end now with heavy duty 2 inch lift front springs?
It's good to drive now that higher than before, more faster now that the tyres diameter is bigger. I'm satisfied with Pedders 2 inch lift kit.
What brand did you use for the lift kit? Springs and shocks? Salamat!
How much does this kit kost , i just did buy prado j90 facelift
Hi.
I am going to install IMS suspension with 2" lift and 30mm spacers.
My tire size is 265/65/R17
I hope this is sufficient to prevent any rollovers.
I think your plan is a good set up, my suggestion is use 265/70/R17 tyres.
Could you help 2” means how many cm in front spring and how many for the rare ?
@@magedbaqar4368 5.08cm
I have installed 30mm wheel spacers after a 2 inch suspension lift on Prado.
The wheels are still stock.
I have 3 options.
Should I get -12 offset and remove spacers?
Or
Keep spacers with stock wheels
Or
Get -12 offset and let the wheel spacers be there..
Hey! Nice video! What width are those black steel rims?
17" mate
@@gooddayvlogs23 yes, but how wide are they? 17x??
Looking good! What size tires you got?
275/70R17
Bfgoodrich mate
Did they not rub or causing trouble? Looking to fit new tires and its between 265/70r17 or 275/70r17
No, steel Rims has -10 off set. If you want to fit 265/70R17 the old alloy mags can be used.
Hello po sir, ask lang po if yong OEM coil spring ng LC Prado J120 front and rear the same ba sa FJ cruiser at Fortuner? Salamat po sa explanation nyo.
I'm not really sure, but if you look at the wheel base fortuner ang Prado are the same.
Great content, kabayan. I just bought an old 2003 Prado 4L V6 and planning to do a 2” lift like you did to your Prado. Just wondering, how much did it cost you for the Pedders 2” lift kit? TIA
16 hundreds yata kabayan yung apat na shocks di ko na matandaan.
Sarap mag trabaho Dyan sir no, puro hightech Ang mga gamit😊
@@ericvillaruell.276 yun nga mas mabilis matapos ang gawain
Why is it that front stabilizer bar has to come right off.. is undoing the links enough. Or is it physically in the way of installing new struts?
Yes it is
@@gooddayvlogs23 can the rear 2inch coils be put in without a spring compressor?
@mattyg7143 you need a pry bar to pry the coil in on the rear. On the front must have a spring compressor. Best easy way is brimg the springs and struts to the auto shop to assemble it. That's what i did I paid 80, find a shop near your place ask them if they van hrlp you to assemble the front shocks.
What hydraulic jack did you use?
It's a 2.5 Tonnes crocodile jack mate.
what did you use on it to get that height before you installed the 2inch lift kit
Did you mean a tool? I use spring compressor.
@@gooddayvlogs23 i mean it was high before you installed the kit, how'd you do that
I put bigger tyres, 275/70R17 size.
@@joelsilvera5141 no, its just the standard height .
Can I add a spacer to grande 2006? It has air bag suspension
There is a product in the market called DIFF DROP OFF KIT can be used on air suspension like your grande.
Rim width ?
Hi, what size is your rims and offset in the end of the video? What size tyre?
The rims size is 17 inch, -12 offset. Tyre size 275/70R17
Thanks for the reply. Do you have no rubbing at all? Do you think it would rub on a prado 120 without a bull bar?
Not a single nut or bolt torqued to spec...but hey, that's the Toyota way. Had you done this with a Discovery (i know, they have air suspension) you wouldn't have made it out of your driveway.
I do apply torque only on an engine rebuild, the rest just tight it. Prado Grande also have air suspension I have not done with the discovery I wish one day.
Sir pakita mo pano maglagay ng oil catch can at kung talaga importante ba talaga magka oil catch can ang isang SUV .
Ok Brod, gagawin ko yan salamat sa advice mo.
Always watching sa mga video mo sir kasi mahilig din kasi mangalikot ng mga sasakyan..
Yun nga brod salamat sau
Hey mate
What brand lift kit is that
Pedders mate
Mate quick question, your Prado is a Grande? I'm being told, we cannot do an upgrade to the Grande, because of airbags on the rear, you have airbags?? You did not have any problems from watching your installation
It's only a GXL coil springs not an air bag. I think your car has a suspension height control.
I didn't have any issues after all.
@@gooddayvlogs23 Yes it does, just doing the fronts now, love the vids, keep em coming mate.
Bro, just asking, pwede din ito to do on a Prado 90? I'm interested to install the same on my vehicle. I'd appreciate advice on this.
Pwede rin brod, pareho lang sila pero you have buy fir prado 90 series maaring iba ang part number.
@@gooddayvlogs23 Thanks mate. Nahirapan akong makakita ng parts and mechanics here in Metro Manila. Am going to modify my ride a bit for eventual car camping.
@@gooddayvlogs23 I got a recommendation to use Oldman Emu for the lift kit.
@@normancamungol5640 good brand yun brod.
Hey! What size of tires do you have?
275/70r17
@@gooddayvlogs23 thanks
Good day kabayan, i have a 2008 vx 120 prado. Plan ko sana lagyan nang bullbar. Kailangan ko pa ba i lift? Or it can stay that way? Thanks
Hindi mo na dapat i lift, dapat kumpleto lang yung bullbar kit n bibilhin mo. You can do it yourself madali lang
@@gooddayvlogs23 mraming slamat sa advice sir! Keep posting videos about car! U can help lot of people specially those diy-ers🙂
Thank you
Hi, what's tires and rims size/offset?
275/70/17 offset neg 10
Boss where are you located?
Hallam in Melbourne brod.
Is it gxl?
Yes
Sir ask lang, anong tire size gamit mo? Anong recommended tire size sa prado after left up to 2’?
Thank you for your reply.
Itong sa akin 275/70R17
Same unit po tayo sir, Anong observation mo sa fuel consumption? Ty
Sa long drive matipid pero city drive medyo malakas yun din ang sabi ng iba.
2’ lift din sa akin and one time I used the 265/70/17, I noticed the fuel consumption was good however, it didn’t look proportion due the ground clearance after the 2’ lift.
Anyway, thank you for your videos that gives us the idea owning a prado 120 series.
@@1973yesir Yes sir, modified suspension driving performance is different kumpara sa original stock.
Sir my mga katongan lang po sana ako kong Pwedi po ba ako sumama sau mag trabaho dyan
Brod apply ka na lang papunta dito
kabayan magkano ang ganyang aluminum bumper diyan?
baka pwede website naman ng seller pls.
Genuine Toyota bull bar ito kabayan. Sovereign bull bar, sa Toyosa ka mismo makakabili
Sir saan kau sa aus?
Sa Melbourne aka brod.
@@gooddayvlogs23 nice po may social media po ba kau? at lilipat kami dyan mahilig din ako aa auto baka po maka meet or pa tulong bumili hahah
@@shot2x Meron brod, dito ako sa Melbourne... saan ka ba? Pwede kita samahan for car inspection bago mo bilhin.
anong year model yan prado 120 mo bos? 1kz-te engine ba yan?
Yes bro 2003 model
@@gooddayvlogs23 wow nice. Yan ang isa sa pinakamatibay na toyota inline 4 diesel engine boss.
@@genki_renie Tama ka bro, kung maniniwala ka 435,000 kms na mileage noting car ko.
Good day sir, nasa NSW po ako now, nag hahanap po ako ng Job here regarding in mechanic, airccon mechanic po ako sa pinas you can reply here po if you need a helper?? Thanks po sir.
Brod magkaiba ang category ng trade natin, pero in demand din ang trade mo dapat sa mga Air-conditioning shop ang applyan mo.
@@gooddayvlogs23 okay sir thanks po, bali 1 month palang me, dito po me now with my aunt sa blue mountains.
Thanks po.
Tyre size please
275/70/17
Can you speak in English more so that we can all understand