Thank you sir, my father spent half a day watching all of this on his small phone, redrawing every step of this video, with every single detail. He asked me to save this video for him, he doesn’t get what youtube is. He suffered from motorcycle accident 2 years ago and doesn’t feel his feet, but he spends most of his free time in his little garage and makes things for garden, cars and tools, despite walking with canes. You brought him inspiration and joy. Salute.
Probably the best DIY project I have seen on RUclips. The design and construction was excellent. Yes, there are alterations that could be made, but he achieved what he set out to build, and it works. Tradesman.
Very well done. Consider placing a guard at the front of the saw blade just above the guide bearings. This would prevent accidental touching OR should anyone stumble they will not get in contact with the moving blade.
You have more common sense and usable work knowledge than most people I know. And, that is one bad ass tool you built. I like those guides. Thanks for posting this video.
Check out Donn DIY, he has built some stuff with scrap metal that he cleans up to new condition and the builds trailers and brush hogs and his band saw mill is better than wood mizer's saw mill
really well done! Just one hint: you should better create a housing around your bandsaw for safety in case the band will break unexpectedly, then it's perfect!
A very very fine craftsman I know lopped 4 fingers of his hand when the bandsaw blade he was using broke. Pinky all the way angling up to the 1st digit of his index finger. The other 2 in that diagonal line. They reattached them, but he used to tell me when it was cold outside, if I ever lose cut my fingers off, toss them in the trash can, cause his hurt all the time. I think he was just complaining cause they hurt. I always thought I'd rather have 4 pain ridden fingers than no e at all. Crazy scar he's got too. I know another guy lost all fingers on both hands minus thumb and Pinky. Always Hawaii time for that man. That was in a winch on a dozer. His fingers were not savable. He gets by. Not on welfare. Drives a wrecker. Don't grab a winch cable too close to the drum, and ask the inexperienced guy on the machine to let line out. He might let the cable in on accident, and bring your fingers or more with it. Grab that thing as far away from that drum as possible. So you have more than plenty of time to drop that bitch before it can eat your hands. Machines have zero empathy, or conscious. They will eat you up, like you weren't even there, and just continue on with zero fucks given. They are awfully handy to have around, but don't expect an apology when you stick your head, or han in her mouth, and the bitch bites you, chews you up, and keeps on pushing. Company gal, she eats while working. Only stopping for some lube, or fuel. I know another girl that had a terrible incedent with one of those mechanical penis tools. It was bad. Caused major mental issues, broke up her marriage, kids got hearts broken, she only wants that machine now. It dont care how heavy she gets, it has a job to do, it damn fuckíng well does it with many fucks given
Love it. Innovative and resourceful. It is great when someone takes something that is no longer useful for its original design and gives life to something new.
Un proyecto impresionante,a falta de dos manos de pintura ,quedó como de fábrica y reciclando las ruedas,genial un saludo y un like desde Naron(Galicia)
A man uses his hand is a labourer, a man uses his hand and brain has a workmanship,but a man uses his hand ,Brain and heart is an artist..job well done sir..
It may be a good idea to fill those wheel grooves in the way to have a convex shape (with a bump pointing outside) and have a crown pulley rather than regular one to hold the blades. It will require some plastic material (such as two component epoxy, but it will need a lot). Use the motor power to turn them in a lathe like style. The U shaped groove will put unecessary stress on blade teeth and will dramatically decrease their lifespan, teeth may also eat into wheel through rubber and may make them hold the blade inconsistently, which will require frequent maintainance. Beside decreasing stress on the build, crown pulleys are self centering. Very inspiring work. Thank you for sharing.
I'm still new to a good bit of this, but am pleased that your comment crossed my mind as well. I was holding a bike wheel in my hand and said "Hmmm. Go RUclips 'Bicycle Band Saw' and see what pops up." Was not disappointed. Makers on RUclips- Where the Comments are actually part of the Content. Cheers, and Excelsior!
WOWWWWW Congratulations young man, you have great talent and skill, your video came to me here in Brazil. You shone in your step by step. God bless you.
That would take a few xtra years to learn . This guy i suspect he has an engineering degree and started working with metals since he was little kid .He beat me . I started it when i was in my teens
Thought of this several years back....and EVERYONE seemed to say it would be dangerous and cost more than just buying one with a warranty.... now... I don't have a welder....BUT.... now that I see that it IS possible.... I may just get around to doing it. Thanks for doing what others told me not to! 😊
Naka2x bilib bro, Ang bata mupa ngunit dami mong alam. Kaya pala ng pinoy.. Mahilig din ako nyan, but ang layo ko sa idea at ingenuity mo. Applicable sa pinoy na low budget. Sana you sell your plans para maka gawa din ako.. Kaya ko nman gayahin yan base sa pinakita sa video pero mas madali kung my dimensions at itemize materials used. More power. Ikaw na idol ko next to Wendel Mathias.
Да ладно, один раз пильнул без кожуха, подумаешь. Приделает потом, я уверен. Лично мне все видео понравилось. Идей куча. Руки не из жопы. Все делает чисто, точно и отлично. С меня лайк и подписка с колокольчиком.
К сожалению не могу прочесть комментарии. За работу однозначно РЕСПЕКТ!!! Основательный подход, ювелирная работа, лёгкое, даже изящное владение инструментами. Просто красиво! Но есть технические вопросы. Почему так много сварки? При возможной поломке сварку придется резать. Может лучше было бы частично собрать узлы (или модули) на резьбах? Шкив на двигателе из чего сделан? Если это текстолит или углеволокно - тогда да, но очень похоже на дерево. Прижимные подшипники для ленты. Видел дважды такие пилы, тоже в сарае сделаны. Так вот под кулисами прижимных подшипников стоят короткие но достаточно мощные пружины. Станок работает гораздо тише и звук мягче. Это так мысли вслух. Но всё равно повторюсь За работу однозначно РЕСПЕКТ! 👍👏🤗
Excellant build , only sugeestion i would add would be to use nylon lock nuts on the blade guide holders to prevent them loosening. Similar design on larger scale with a petrol engine for tree conversion .
na inspire ako sayo sek noun pa kaya nag vlog na rin ako pero mga simpleng gawain lang. hahahaha. daan ka naman sa bahay ko para makita mo idol. salamat.
Nice project. Just a note about welding galvanized steel. Grind away the zinc plating first if possible, and do not breathe the welding fumes as they are very toxic. A well ventilated area is good.
Ну красавчик!! Так и есть Красаучек!! Уделал всех производителей ленточек на раз два!! Просто,элементарно,из говна и палок так сказать!! Респектище огроменный!!
Sou brasileiro e parabenizo pelo excelente trabalho , eu não poderia de deixar de fazer o meu comentário , é o melhor vídeo sobre serra de fita no youtube show de bola
Thank you sir, my father spent half a day watching all of this on his small phone, redrawing every step of this video, with every single detail. He asked me to save this video for him, he doesn’t get what youtube is. He suffered from motorcycle accident 2 years ago and doesn’t feel his feet, but he spends most of his free time in his little garage and makes things for garden, cars and tools, despite walking with canes. You brought him inspiration and joy. Salute.
Que linda história
Hope he is fine brother. Very inspiring!
Thank you sir, can you tell me the motor types and Ph?
Probably the best DIY project I have seen on RUclips. The design and construction was excellent. Yes, there are alterations that could be made, but he achieved what he set out to build, and it works. Tradesman.
You have got to be the best home shop fabricator on RUclips. Keep up the good work.
จค
WOw.i.watching.everyday.I.like.so.much.
Very well done. Consider placing a guard at the front of the saw blade just above the guide bearings. This would prevent accidental touching OR should anyone stumble they will not get in contact with the moving blade.
Your work is very good. You are a person full of charity.thank you
You have more common sense and usable work knowledge than most people I know. And, that is one bad ass tool you built. I like those guides. Thanks for posting this video.
Check out Donn DIY, he has built some stuff with scrap metal that he cleans up to new condition and the builds trailers and brush hogs and his band saw mill is better than wood mizer's saw mill
Good video
Ara machine banane mein kitni lagat
Hola como estas yo lo felicito es una cazadora que se be que quedó.muy buena quisiera que me enviarlas las medidas
Certainly the best diy band saw on YT 👍
really well done! Just one hint: you should better create a housing around your bandsaw for safety in case the band will break unexpectedly, then it's perfect!
A very very fine craftsman I know lopped 4 fingers of his hand when the bandsaw blade he was using broke. Pinky all the way angling up to the 1st digit of his index finger. The other 2 in that diagonal line. They reattached them, but he used to tell me when it was cold outside, if I ever lose cut my fingers off, toss them in the trash can, cause his hurt all the time.
I think he was just complaining cause they hurt. I always thought I'd rather have 4 pain ridden fingers than no e at all. Crazy scar he's got too. I know another guy lost all fingers on both hands minus thumb and Pinky. Always Hawaii time for that man. That was in a winch on a dozer. His fingers were not savable. He gets by. Not on welfare. Drives a wrecker.
Don't grab a winch cable too close to the drum, and ask the inexperienced guy on the machine to let line out. He might let the cable in on accident, and bring your fingers or more with it. Grab that thing as far away from that drum as possible. So you have more than plenty of time to drop that bitch before it can eat your hands. Machines have zero empathy, or conscious. They will eat you up, like you weren't even there, and just continue on with zero fucks given. They are awfully handy to have around, but don't expect an apology when you stick your head, or han in her mouth, and the bitch bites you, chews you up, and keeps on pushing. Company gal, she eats while working. Only stopping for some lube, or fuel. I know another girl that had a terrible incedent with one of those mechanical penis tools. It was bad. Caused major mental issues, broke up her marriage, kids got hearts broken, she only wants that machine now. It dont care how heavy she gets, it has a job to do, it damn fuckíng well does it with many fucks given
the best DIY project I have seen on RUclips
I hope my daughter won't missed her bike...
Thanks for the idea
Haha true.
Yea I might steal me a bike tonight.
Good think! All sample and effective 👍👍👍.
Nise work
But be careful welding galvanized verry dangers use fan when you welding
Good luck
Your videos are amazing, very detailed instructions for viewers, very helpful for all those who need to learn creativity
Wow galing naman nyan!
Apu mu
i was so inspired by your project i built a metal cutting bandsaw and a wood cutting bandsaw i will have to post a video of them in the near future.
gosto muito dos seus videos porque você não fica falando nem enrolando nem pedindo like. continue assim!
Beautiful design, and build. Don't forget to do part two showing how you made and installed the blade guards. Thanks for sharing!
I bow to the young master and inventor!
Great work thanks very much for your sharing, Greetings to you from Algeria 🇩🇿
Love it. Innovative and resourceful. It is great when someone takes something that is no longer useful for its original design and gives life to something new.
Nice bro ang galing. iba talaga tumirada ang mga pinoy.
Amazing work. Thanks for sharing your skills and craftsmanship.
Парень молодец,настоящий кабардинец !
Уей сыбгъэдыхьэшхам )))
Нlытlэ адыгэлlкъэ нэгъасауэ!
Арам уей! Адыгэм къэмыгупсысын щы1э!
Very wonderful work and all respect
Brilliant...dont see why people dont appreciate it
Un proyecto impresionante,a falta de dos manos de pintura ,quedó como de fábrica y reciclando las ruedas,genial un saludo y un like desde Naron(Galicia)
Its So Wonderful to build bandsaw very nice bro
Muito bom, gostei muito dessa serra fita, farei uma pra mim baseada na sua, parabéns meu irmão, você é muito inteligente e caprichoso!
wow great idea to use a bicycle disc as a saw wheel ... thanks for the idea i'm watching it from you
Very nice good job
Amazing result. i'm surprised that no one thought to use bicycle wheels before; it's perfect.
Good job guyz,nice work..
A man uses his hand is a labourer, a man uses his hand and brain has a workmanship,but a man uses his hand ,Brain and heart is an artist..job well done sir..
Great video
I personally liked th background sounds over music
Thanks for sharing
Wow keren mas, disekitar kita juga byk bahan2 ya terima kasih idenya
Looks to be working well. I hope you build some covers for safety.
Du super travail !!! Bravo !
Tolle Arbeit !!! Bravo !
Great work !!! Well done !
Wow that thing came together well👍👌
bilib talaga ako sayo sek lagi ko sinusubaybayan mga vids mo keep up the good works!
It may be a good idea to fill those wheel grooves in the way to have a convex shape (with a bump pointing outside) and have a crown pulley rather than regular one to hold the blades. It will require some plastic material (such as two component epoxy, but it will need a lot). Use the motor power to turn them in a lathe like style.
The U shaped groove will put unecessary stress on blade teeth and will dramatically decrease their lifespan, teeth may also eat into wheel through rubber and may make them hold the blade inconsistently, which will require frequent maintainance. Beside decreasing stress on the build, crown pulleys are self centering.
Very inspiring work. Thank you for sharing.
I'm still new to a good bit of this, but am pleased that your comment crossed my mind as well. I was holding a bike wheel in my hand and said "Hmmm. Go RUclips 'Bicycle Band Saw' and see what pops up." Was not disappointed. Makers on RUclips- Where the Comments are actually part of the Content. Cheers, and Excelsior!
With a basic tools you can do this. It is very smart man. Good Job!!!
Muy buena el trabajo tanto lo busque pero al fin lo tengo lo haré mi amigo gracias felicidades por compartir muchas gracias por tu trabajo .
Trimakasih Atas ilmunya. Smoga banyak manfaat. Kokonya Berkah slalu
Ayos yung idea mo sa puleya. thumbs up bro 👍👍👍
ayaw nga ma welding e haha
hehe pareho nung ginawa ko na belt sander ayaw din ma welding yung puleya nung motor pundido kasi heehheeh😅
yung sa puleya na gawa sa kahoy ganda ng pag kkagawa mo bro
WOWWWWW Congratulations young man, you have great talent and skill, your video came to me here in Brazil. You shone in your step by step. God bless you.
Can only imagine what you can achieve with a metal lathe and milling machine........ kudos!
That would take a few xtra years to learn .
This guy i suspect he has an engineering degree and started working with metals since he was little kid .He beat me .
I started it when i was in my teens
Thought of this several years back....and EVERYONE seemed to say it would be dangerous and cost more than just buying one with a warranty.... now... I don't have a welder....BUT.... now that I see that it IS possible.... I may just get around to doing it. Thanks for doing what others told me not to! 😊
Ну да, чем не вариант?! Достаточно легкая конструкция колеса. Но наверно, резиновую часть нужно как-то доработать. Молодец!!!
👍👍👍👍👍👍👍👍толковая работа!!!!!!Удачи,тебе,самоделкин!!!!!!
Làm thêm cái cỡ bên trái chỗ cưa nữa ad.tuyệt
o cara simplesmente é gênio nota mil!! parabéns.
Naka2x bilib bro, Ang bata mupa ngunit dami mong alam. Kaya pala ng pinoy.. Mahilig din ako nyan, but ang layo ko sa idea at ingenuity mo. Applicable sa pinoy na low budget. Sana you sell your plans para maka gawa din ako.. Kaya ko nman gayahin yan base sa pinakita sa video pero mas madali kung my dimensions at itemize materials used. More power. Ikaw na idol ko next to Wendel Mathias.
Haha salamat bro pero malayo na agwat ni wendel mathias.
Amazing. I like your work. I am from indonesia
Good job brother. You are genius young man..
Неплохо для столярки незаменима респект тебе и уважение 👍👍👍👍👍🍺!
Да ладно, один раз пильнул без кожуха, подумаешь. Приделает потом, я уверен. Лично мне все видео понравилось. Идей куча. Руки не из жопы. Все делает чисто, точно и отлично. С меня лайк и подписка с колокольчиком.
Я абсолютно согласен! Парень молодец.
@@ИванИванов-и3ь5оМужик рукастый а кохуж он слева приварил, приварит и спереди потом.
Такое 1е вижу 👍👍👍👍
Я построил свой рабочий вариант такого станка для дерева на больших вело колесах, можно глянуть у меня на канале
Нужно шкив привода сделать с внутр.стороны,чтоб каждый раз,меняя пилу не снимать ремень.
Galing pre, gayahin ko yan ha... pyesa ng. bike.. panalo.. murang mura
A Man that uses his head and does the stuff !
Gracias genio por compartir tu idea el modelo la voy a usar para máquina de Carpintería.. mis respetos.. Saludos desde Paraguay
great video great machine
Eres un genio
К сожалению не могу прочесть комментарии.
За работу однозначно
РЕСПЕКТ!!!
Основательный подход, ювелирная работа, лёгкое, даже изящное владение инструментами.
Просто красиво!
Но есть технические вопросы.
Почему так много сварки? При возможной поломке сварку придется резать. Может лучше было бы частично собрать узлы (или модули) на резьбах?
Шкив на двигателе из чего сделан? Если это текстолит или углеволокно - тогда да, но очень похоже на дерево.
Прижимные подшипники для ленты. Видел дважды такие пилы, тоже в сарае сделаны. Так вот под кулисами прижимных подшипников стоят короткие но достаточно мощные пружины. Станок работает гораздо тише и звук мягче.
Это так мысли вслух.
Но всё равно повторюсь
За работу однозначно
РЕСПЕКТ!
👍👏🤗
非常完善全金屬DIY設計打造成的鏈條切割,,金屬及木材的機械可題供方便切割好多成品的好工程💯💢
Interesting approach! You could you double walled wheels and a front hub bicycle motor to build it even easier.
Run the belt behind the saw band instead of front. much easier to change the saw. solid work...
Parabéns, adorei ver seu trabalho, quanta habilidade e criatividade!
Abraço aqui do Brasil
hi,,I m from indonesia,,im like this your project.👍👍👍
Excellent work 👍👍
excelente idea y creatividad, gracias por compartir, solo una observacion, la cinta quedo expuesta, por seguridad debe estar tapada, saludos
muy buena idea y bien echa la sierra , saludos desde ARGENTINA
ganda po... pero sana lagyan nyu po ng shield para prote tion may bandang blade sa harap nyu.. Keep it up po
Excellant build , only sugeestion i would add would be to use nylon lock nuts on the blade guide holders to prevent them loosening. Similar design on larger scale with a petrol engine for tree conversion .
im sure he needed this advise, he did only build this from recycled scrapes & he cant figure that out..
The best handmade tool bro...👍👍👍
Thanks
@@SekAustria sir pwede po magpagawa sa inyo ng belt sander,saan po location nyo para mapuntahan ko kayo pls.po
Clever! Love your homemade tools.
Killer! I have been planning on making one myself and wondering if it would work. Now I know and I can begin.
Nice
Oh yes, add a tilting table top. Would be a great feature.
Just plain cool, dude....love your rooster.
wow galing talaga idol, nuon ko pa gusto magkaron nyan. dko alam pano gawin. hahaha. nakakabilib ka sek. if you still remember me fan moko nuon pa.
na inspire ako sayo sek noun pa kaya nag vlog na rin ako pero mga simpleng gawain lang. hahahaha. daan ka naman sa bahay ko para makita mo idol. salamat.
Haha sige bro kapag may time. Goodluck sa career mo bro godbless you
Excellent work. Well done.
Nice project. Just a note about welding galvanized steel. Grind away the zinc plating first if possible, and do not breathe the welding fumes as they are very toxic. A well ventilated area is good.
He is wearing breathing mask
BHZ Motovlog that’s a dust mask not an aspirator
Leave the ends of the tubes soaking in vinegar for 48 hours or so because there is zinc inside the tubes as well as outside!
Hello 👋 very Good very Nice 👍 your Working thanks so much Goodbye my Lovely 😊 next Video 🌹❤️
Bloody awesome 👏 work mate this is my kind of band saw👍
Ну красавчик!! Так и есть Красаучек!! Уделал всех производителей ленточек на раз два!! Просто,элементарно,из говна и палок так сказать!! Респектище огроменный!!
Sou brasileiro e parabenizo pelo excelente trabalho , eu não poderia de deixar de fazer o meu comentário , é o melhor vídeo sobre serra de fita no youtube show de bola
The machine is very creative running well
good job man i think will make one for my self
It's good to see fellow Filipino doing some very good work. Great ideas Sir Sek, keep it up.
filipino ingenuity, got to love it!
Great work and useful bandsaw thanks man
Good and Best work thanks for scharing mr
Excelente trabajo!!!
Felicitaciones!!!
Great job only thing i would change is to make the table top tilt as you will use this feature in the future.
Gran bel lavoro. Complimenti
- The lights go out in Thailand, when Sek starts to weld in Austria ... 2:19 ...
Haha lol
Maravilloso DIY que haya visto en RUclips, Mil gracias.
This is really beautiful. Hats off!
Excellent job, you have good power of imagination, I enjoyed watching it. Thanks for sharing