Massive Log on My 13hp Homemade Sawmill - Mobile Band Sawmill Build
HTML-код
- Опубликовано: 21 сен 2024
- That is the Biggest log I have cut so far on my 13hp homemade band sawmill. Luckily I recently build the log lifter system and did not have any struggle getting the log on the sawmill bed. You can see how I build the log lifter for the sawmill in my previous video. Enjoy the video, like and subscribe to support my channel.
#homemade #bandsawmill #sawmill
Great log for sawing. Do yourself a favor and place your stickers about 16 inches apart. That will cut down on the warping boards. I learned this the hard way!
What do you mean stickers?
You work very creatively and wonderfully
Don`t forget about your spaniel-dog,best friend recently.
Nice job Paul. Great saw mill. Just one quick suggestion that your probably aware of but I noticed that you turned it around so the small end was facing the blade so you know the min size boards you can cut. On a log with a significant difference in diameter is the 2 ends, if with the initial few cuts, if you get the pith, at both ends, the same height from the trailer bed then you'll get more out your log and won't have as much run off from the grain too. Hope that makes sense. Keep up the good work
How do you keep the cutting section stable on the running rail.good project
Excellent!
FYI - from the WD-40 website "WD-40 Multi-Use Product is not really a lubricant. The product’s formulation also contains anti-corrosion agents and ingredients for penetration, water displacement and soil removal.."
So you should use something else to lubricate your bearings.
Cover the wheels when the belt falls or breaks causing injury.
It did a great job. Very well for 13 hp.
Thank you.
Gostei do desempenho dessa máquina. Obrigado
Nice job young man
Porque el perrito encadenado?
Its a Great Build ,But For your Own Protection, You really need to Make covers,If you hit a Large piece of steel, That blade could snap and cut you Bad,
New sub that's a nice machine you got there works very well for what I could see Excellent job I'll be watching more of your channel Stay safe my friend and we'll get you another one
Can you show us how your sawmill works. How do you have it move up and down? How do you tighten the blade? What size is your blade? How do you adjust the cutting width? And so on. I like how you tighten your blade. It looks to be the most simplest that I’ve seen so far. I don’t yet see how you raise the blade up and down I could see that it’s connected to something but I don’t know what that is it might be winch, perhaps. I’m in the process of building my own, and I want to minimize the amount of physical labor I use. I like the way that you pulled the logs onto the rig but that’s also physical labor and I’d rather use a winch or just push a button. I also like how you have the stops, but again, I would like that to be less labor. It was very nicely done.
Sir very good sawmills how I could I provide in india sir please forward me the mechine for me
kerala making
is that hardwood? if you come across celan hardwoods dimension for guitars, body's and necks.. maple, walnut, ash, poplar, spruce so on so forth.. lay it out for primarily 1/4 sawn and rift sawn, big money
Where did you get your wheels? I'm running on tires and thinking of upgrading.
E bravo il nostro Archimede falegname!
You need protective cover (guard ) for the blade..☠️☠️☠️
Where is your ear plugs? Did you hear me? Ear plugs!!
This is huge
Yo diría que antes de hacer videos deberías tener ese animal ..que se ve en pantalla que lo tengas en mejores condiciones y no atado de esa manera !!!
And let your child play in traffic?😢
Very impressive! Possibly some covers over the wheels for safety sake. Other than that, a great build.😎
Great so much thanks
nice build
are you in Bulgaria?
BRO ? pls use a protection for the weels
Machine price kitna he bataie
How good is the fuel consumption? Otherwise I have seen a great job there.
The uncovered fly wheels look very dangerous.
В случае разрыва полотна траектория разлета непредсказуема, как следсвие- огромная вероятность несчастного случая. Устройство элементарного кожуха в разы бы снизило риск
Вобще-то под перед подкладывать надо дощечку.
any chance on getting the same plans you have or made up to build the saw mill
I would also like the plans used. Would pay for them
Go online, all kinds of plans there for these...Research it.
Nice build did you make the blade wheels?
Salut! Am recunoscut lemnul de paulownia. Dupa cati ani l-ai taiat?
Do you have the plans for this?
How much money
Quand la lame casse et elle saute dans ta figure comment tu sera ?
I would find a way to cover the blade
What is the width of the belt?
Can You bild like this for me?
I'm curious, what is the preferred coolant/lubricant?
Water 😃
a kutyát engedd el , miért van láncon , pláne a gép melett .
А где кожух для пилы или конечности лишние?
❤
Any chance you could reply to your veiwers
Nope, he just needs your view for his corporate pay cheque...
कहा से हैं भाई आप ,आपसे कॉन्टैक्ट हो सकता है क्या अगर होगा तो no, send karna to pls,
Una lastima que ese hermoso rollo no se proveche bien la madera que da, de ese rollo lo unico que tiene que quedar es la costanera que esta afirmda a los hierros las otras 3 costaneras es leña, y como se hace?.
Se hace el primer corte que es leña, se saca 2 tablas de 1" pulgada y esa parte aserrada se la pone para abajo como base, se hace de la misma manera que la anterior y se lo corre al rollo hacia los hierros y se empieza a sacar tablas y tablones más anchos y ya canteados listos para la venta...
Porque todo lo da un rollo se vende.
Lo se porque fui Oficial Aserrador de Maquina Carro y de Maquina Sinfín con más de de 25 años de experiencia...
Saludos desde República Argentina.
P/D. Si hay alguna alguna respuesta por favor que sea en idioma español
kothay pabo no ta dila gogagok kartam
that seems to take forever, I wouldn't like to pay per hour to get logs cut , sorry.
It’s obvious the guy is an amateur. Who in their right mind would operate this machine without safeguarding the wheels and blade. If that blade snapped,it would take his head off in a heartbeat.
MASSIVE?
Click bait is the in fashion on you tube. I always read the comments first.
The woodmill is ok but the chained dog under the tree ruined my 💔! Let him walk pls!
Me too
4 mind your own business cuz you don't know if he's just trying to keep the dog safe because there's an active Saul going and some dogs can be stupid
Suggestion only
Are your parents rich...asking for a friend.
Again we see here why band saws are time and effort wasting inventions for lumber milling. Go swing saw.
Position the log once, never move it again.
Start the motor once, never turn it off.
One walk in each direction, a finished sized board comes off.
Quarter sawn or back sawn -- your choice for any board along the way. I built one myself for up to 6"x6",
That poor dog could use a grooming.
I agree.
why 2and 3 cuts on the first cuts and 1/2 inch cuts at that your wasting time gas blade life wear and tear just to get squared up just an observation you usein little strips of junk wood for somethingother than burning?
Not a good fit for me! Goodbye!
is your dog on a chain?????😖😖😖😖
Extreme danger! Just think blade coming off the pullies while in motion & finding your neck on its way!
One must avoid such projects if due attention is not given to safety as a priority. This shows how much one cares about his own life, let aside others. 👎👎👎
You not a good person because a good human dont but a dog on a chain a let him . A dog must running and play with other dogs!
Почему чехла нет? Где защита?!