Messing Up the Fluorescence of Tonic Water - in several ways...

Поделиться
HTML-код
  • Опубликовано: 26 авг 2023
  • How delicate is the fluorescence of tonic water? In this video, I test several ways of affecting the light output of tonic water and try to explain how it all works.
    Turns out that the fluorescence of tonic water is a happy, coincidental combination of the right factors for quinine!
    My Patreon-page: / brainiac75
    Recommended videos:
    Smartphones measure MAGNETISM in 3D | Gaussmeter in your pocket?: • Smartphones measure MA...
    Crazy difference between 5W LASER and 5W LED: • Crazy difference betwe...
    Glow-in-the-dark: Can you change the color?: • GLOW-IN-THE-DARK: Can ...
    Did you miss one of my videos?: / brainiac75
    FULL MUSIC CREDITS
    Time code: 0:01
    "Long Note Three" Kevin MacLeod (incompetech.com)
    ISRC: USUAN1100424
    Time code: 0:56
    "Energizing" Kevin MacLeod (incompetech.com)
    ISRC: USUAN1900040
    Time codes: 3:10 + 8:40
    "Adding the Sun" Kevin MacLeod (incompetech.com)
    ISRC: USUAN1900041
    Time code: 4:41
    "Music for Manatees" Kevin MacLeod (incompetech.com)
    ISRC: USUAN1400009
    Time code: 6:32 + 8:15
    "Impact Andante" Kevin MacLeod (incompetech.com)
    ISRC: USUAN1100621
    Time code: 6:45
    "Perspectives" Kevin MacLeod (incompetech.com)
    ISRC: USUAN1300027
    All music above licensed under Creative Commons: By Attribution 4.0 License
    creativecommons.org/licenses/b...
    Time code: 4:15
    Mix of two tracks:
    1) The Shimmering by fran_ky (freesound.org/s/237363)
    Licensed under Creative Commons 0 license
    2) "Spacial Harvest" Kevin MacLeod (incompetech.com)
    Licensed under Creative Commons: By Attribution 4.0 License
    creativecommons.org/licenses/b...
    ISRC: USUAN1100653
    #fluorescence #tonicwater
  • НаукаНаука

Комментарии • 218

  • @ares395
    @ares395 8 месяцев назад +121

    As a side effect you made me realize that these double insulated glasses aren't as dumb as I thought. They are always marketed as being used for hot drinks which is dumb in my opinion because that makes it 10x more likely to burn your mouth. If the glass is hot you know it'll also burn your mouth. They are much better for cold drinks.

    • @YounesLayachi
      @YounesLayachi 8 месяцев назад +22

      Thunderf00t used them to get a clear view of liquid nitrogen and I was amazed

    • @barongerhardt
      @barongerhardt 8 месяцев назад +9

      Got a box of them for a family member a few years ago. They love them for hot drinks. The glasses ended up being more durable than I expected.

    • @Sypher474
      @Sypher474 8 месяцев назад +5

      I've owned some for years, and have exclusively used them for cold drinks. I never understood the hot drink only marketing. I'd wager far more cold drinks are consumed overall, and a cold drink that's warmed up is far worse than a hot drink that's cooled down.

    • @barongerhardt
      @barongerhardt 8 месяцев назад +2

      @@Sypher474 The physics actually favor the cooler drink. First evaporation over time will tend to cool the liquid to the dew point. In my house right now, this alone will maintain a drink about half way from room temp to freezing and in a drier environment can be closer to refrigeration temps. If colder still is desired, ice contains a massive amount of cooling power, take it down to freezing, and will act as a buffer for the duration of the consumption. A third issue is that the temperature difference between room temp and a cold drink vs a hot drink is greater for the hot drink. The rate of energy exchange is on the order of the fourth power of that delta.
      As a separate issue is the comfort of holding an uninsulated container. A thin metal cup full of ice and near freezing water doesn't bother most to pick up and take a sip. A fresh hot chi or coffee is another story and is likely to end up with significant discomfort, possible spills, leading to minor burns.
      All the above and the smartest thing is to just use insulated containers in all situations.

    • @Sol-hm7ol
      @Sol-hm7ol 7 месяцев назад +1

      I have a set and I love them for any kind of drink though you are right they keep stuff hot for a very long time

  • @tungster24
    @tungster24 8 месяцев назад +98

    It's really interesting just how many variables there are that determine a substance's fluorescence. Awesome video!

    • @brainiac75
      @brainiac75  8 месяцев назад +20

      Exactly! After making this video, I appreciate the fluorescence of tonic water even more. It is so lucky that it happens to be a near perfect environment for quinine fluorescence :) Thanks for the early watch.

  • @seakultastreasurechest8510
    @seakultastreasurechest8510 7 месяцев назад +9

    I don't know of any drinks that fluoresce but I do know that at least some peanut butter will fluoresce, although I am not exactly sure what causes it. It would be amazing to see the effect of your massive 500w UV light on a jar of peanut butter compared to the small 5w UV lights I have used.

  • @CrazySprite
    @CrazySprite 8 месяцев назад +16

    This video is very interesting, I didn't know tonic water was fluorescent!

    • @brainiac75
      @brainiac75  8 месяцев назад +5

      Thanks, CrazySprite. Well, it is! But it is also surprisingly easy to turn off. Quite a coincidence that tonic water happens to have near perfect conditions for the fluorescence of quinine. More videos to come.

  • @alexander97
    @alexander97 8 месяцев назад +18

    Could you do a spectrum comparison of common (and not so common) UV sources? I would be interested in the difference between common "black light" UV-Leds and UV discharge lamps. I would also be interested in how lamps for curing gel nails (as LED version and as CFL version) differ from these. They have more of a light blue appearance, but are also supposed to emit UV.

  • @GMCLabs
    @GMCLabs 8 месяцев назад +7

    Wow! An honor to have my channel name up there with the rest that got it wrong, but in a right way! Never would have guessed table salt would work too! Figured most that guessed salt was bc its one of the few chemical names just about everyone knows.

  • @septicop
    @septicop 8 месяцев назад +24

    I love your content! I love how you are introducing me to all new scientific concepts that I never would have found out about otherwise :).

    • @brainiac75
      @brainiac75  8 месяцев назад +8

      Glad you like it, septicop! Believe it or not, but I learn a lot by making these videos too. Researching deeper into a subject that I usually would. Much more to come!

  • @trulyinfamous
    @trulyinfamous 8 месяцев назад +7

    I realized that you don't do sponsors constantly. It's nice to be able to simply enjoy the content without getting angry at having to sit through or skip an advertisement for something I didn't click the video for, having the flow of the video broken. A simple patreon shout-out is perfectly acceptable for me. I'm not bothered by them most of the time.

  • @photonik-luminescence
    @photonik-luminescence 8 месяцев назад +36

    This is really interesting ! Would decreasing the pH repair the fluorescence again ? (From the backing soda one)

    • @MadScientist267
      @MadScientist267 8 месяцев назад

      That's what he said 😊

    • @TheChipmunk2008
      @TheChipmunk2008 8 месяцев назад +9

      yes but not back to its original fluorescent level as the baking soda neutralizing the acid in the original would have created a sodium salt! (Sodium citrate in this case).

    • @YounesLayachi
      @YounesLayachi 8 месяцев назад +2

      @@TheChipmunk2008 without chloride ions, would that even make a difference ?

  • @bhavikshroff26aug
    @bhavikshroff26aug 8 месяцев назад +1

    Thank you Sir for the mention, it really means alot ☺

  • @eugenetswong
    @eugenetswong 8 месяцев назад

    Thanks for this topic. It was cool to see so many warnings at the beginning.

  • @darkknight8139
    @darkknight8139 8 месяцев назад +2

    Really nice and very interesting video! It is amazing how fluorescence works, and even more amazing that you can find it in the supermarket, if you know what to look for. Massive thanks!

  • @bbbenj
    @bbbenj 8 месяцев назад

    Thanks for these experiments always fascinating!

  • @NiddNetworks
    @NiddNetworks 8 месяцев назад +2

    Love all your experiments... High power UV, super magnets and.....Tonic Water. Thanks for such a brilliant, informative and entertaining channel!

  • @XZXSILVEX50
    @XZXSILVEX50 7 месяцев назад

    Fantastic and very professional channel, congratulations

  • @aarongreenfield9038
    @aarongreenfield9038 8 месяцев назад +2

    My favorite shade of blue because it looks like Cherenkov radiation. Your experiments would make doctor Manhattan proud.

  • @LiborTinka
    @LiborTinka 8 месяцев назад +1

    I work with UV-fluorescent alkaloids harmine, harmaline and tetrahydroharmine. The UV fluorescence of harmine depends on pH in such a way it can be used as a narrow-range pH indicator. The three alkaloids differ only by the level of saturation on aromatic ring, yet have very different emission spectra.

  • @andrewhaychemistry
    @andrewhaychemistry 8 месяцев назад

    Excellent video, you've inspired a project idea for my class. Thanks.

  • @JustPyroYT
    @JustPyroYT 8 месяцев назад +4

    Another interesting Video!
    I'm always happy to watch a new video from you :D

    • @brainiac75
      @brainiac75  8 месяцев назад +3

      Thanks! This video turned out better than I thought when standing in a dark room doing relatively long and repetitive experiments... The magic of editing - cutting down to the essence :) Much more to come, JustPyro.

  • @alxndrassies
    @alxndrassies 8 месяцев назад

    The gold standard in safety warnings at the beginning of videos. They should make this mandatory for all!

  • @paranoiia8
    @paranoiia8 8 месяцев назад +7

    If it light best in acidic ph... Apple juice and vinagee?

    • @brainiac75
      @brainiac75  8 месяцев назад +3

      Interesting. I am considering making a video in the future where I test quinine more precisely under different pH-values. Just need to purchase a pH-meter for it to make sense... Thanks for the early watch and suggestion!

  • @FuzeTheWholeTeam
    @FuzeTheWholeTeam 8 месяцев назад

    wonderful video. always enjoy

  • @GQuack
    @GQuack 8 месяцев назад +2

    I'm so glad I guessed right!! This was an interesting video, even then! Quinine really is an interesting chemical. I can't wait to see your next video!

    • @brainiac75
      @brainiac75  8 месяцев назад +2

      You sure did, GQuack! I have lost count of how many of my videos include clips with quinine x) Probably more to come in the future. It is a chemical that keeps on giving for me. Just wish, I liked the taste of it... More videos to come!

    • @TheChipmunk2008
      @TheChipmunk2008 8 месяцев назад

      @@brainiac75it's also very useful for my mother, she drinks it to prevent leg cramps

  • @DinJaevel
    @DinJaevel 8 месяцев назад

    It was a thumbs up for fluorescence, as I love everything fluorescence, many, many years later and I still feel like watching some kind of magic. And when I saw the Faxe Kondi the thumbs up was undeniable. I had my first Faxe Kondi and Jolly Cola for a very, very long time this summer! Mange tak!

  • @Madsstuff
    @Madsstuff 8 месяцев назад

    This channel has always been perfection.
    Thank you for this content.
    If i remember correctly. Shweps Lemonade fluoresces

  • @IIronyy
    @IIronyy 8 месяцев назад +1

    So glad I could support your content for this long. Goodbye for now.

  • @MILCHMANN420
    @MILCHMANN420 8 месяцев назад

    Very cool video, always found the flourescence of tonic water (or bitter lemon) very mezmerizing :)

  • @Alexelectricalengineering
    @Alexelectricalengineering 8 месяцев назад

    Nice, I love the big 400 Watt UV lamp! 👍👍

  • @metricstormtrooper
    @metricstormtrooper 8 месяцев назад

    Its really nice to see experiments based on my favourite fizzy drink. I've loved the taste of tonic water since I was about 12.

  • @kaitlyn__L
    @kaitlyn__L 8 месяцев назад +1

    As to the call to action at the end, I've noticed Irn Bru fluoresces a really nice bright but deep orange.
    It's not a pale, yellow-y orange like you often see from high-vis vests or even orange highlighters. It's a deep vivid almost red kind of orange, a lot like you get some certain just-past-red laser diodes. The only other thing I've seen fluoresce the same hue as Irn Bru is orange acrylic sheeting! (And an 80s Rubik's cube, modern ones don't do it)

  • @ironmaiden5658
    @ironmaiden5658 8 месяцев назад

    Curious question. Would the metal of the spoon affect the solution and outcome at all? Would a glass stirrer be different? Cheers for the video.

  • @PlanetXtreme
    @PlanetXtreme 8 месяцев назад

    You fooled me when you showed the comments with "baking soda." Very clever; Thanks for having one of those comment guessing games! It was fun to participate in :)

  • @HurtigeHelene
    @HurtigeHelene 8 месяцев назад

    Amper energidrik fra netto er også fluoreserende.. Tak for altid gode videoer. Det er en fornøjelse at følge med.

  • @maxlyth
    @maxlyth 8 месяцев назад

    Hi Brian. Another good video but can I ask you where you got your spectrometer from? I'm looking for something similar that has a fibre input and connects to a laptop by USB. Any advice would be appreciated.

  • @Jawst
    @Jawst 8 месяцев назад

    Sainsbury's supermarket in the UK does a cheap mustard that is coloured with turmeric extract and it stains the plastic seal in the lid bright yellow colour identical to a yellow highlighter marker 😋

  • @SC-RGX7
    @SC-RGX7 8 месяцев назад +1

    The Sunday's Gin and Tonic will never be the same again.

  • @sebbes333
    @sebbes333 8 месяцев назад +3

    *@Brainiac75*
    3:45 What happens if you freeze the tonic water?
    Will frozen & then melted tonic water behave any different to not-frozen tonic water? (eg. destroyed molecules by freezing?)
    How will the graph look if you start with a cylinder of frozen tonic water, maybe at -30*C then you continuously heat it up, until almost boiling, and measure the Lux every 10*C ?

  • @nymiantoft5907
    @nymiantoft5907 8 месяцев назад

    8:29 oh that's me! Thank you!

  • @Pluna-di6vw
    @Pluna-di6vw 8 месяцев назад

    " it certainly quenches the quinine "
    Ill use that for whenever something hits the spot so well

  • @mister-8658
    @mister-8658 8 месяцев назад +1

    My question is if you added a chewable vitamin c tablet to the quinine and allowed it to dissolve would that make it fleuresse brighter?

  • @vincejohnm
    @vincejohnm 7 месяцев назад

    You had a missed an opportunity to show how viscosity affects fluorescence output. Mix in varying amounts of glycerol and plot the change in light output.
    And since you’ve got the tools, I’ve got a wishlist for fluorescence videos.
    1. I’d love to see you demonstrate the difference between fluorescence and Raman scattering. For the people.
    2. I’ve never seen a FRET demo on RUclips. Fascinating technique that would benefit from being presented with your production quality.
    3. Demonstrate the heavy atom effect with dye analogs. Would be a great primer for discussing fluorescence vs phosphorescence.
    Great video.

  • @TheCoilers
    @TheCoilers 8 месяцев назад

    Hi, what type of uv-flashlight do you use? Thx

  • @christopherleubner6633
    @christopherleubner6633 8 месяцев назад

    The 400W blacklight is used for theatrical performances for simulation of moonlight in plays if anyone wonders. They got some that use LEDs that are 405 and 365 that are much stronger since most of the wattage is at the extreme violet or true UV. Very dangerous to look at either one.

  • @omsingharjit
    @omsingharjit 8 месяцев назад

    To makes sure it's pH dependent add acid to check if it florescent back.

  • @jibcot8541
    @jibcot8541 8 месяцев назад

    I was going to say table salt, then you made the reveal, and I was like , ok, then you made the 2nd reveal and I was like YES!

  • @zackkertzman7709
    @zackkertzman7709 8 месяцев назад

    I wonder how much of the temperature dependence is due to changes in the density of the solution impacting the quinine concentration. Pure water is most dense at 4°C so the results could be consistent with a concentration change.

  • @tranquoclan5043
    @tranquoclan5043 8 месяцев назад

    How about trying to redo the process, if the Cl quenches the fluorescence, what happen if remove Cl in the solution (eg: using AgNO3 to precipitate Cl out)? What happen with the lux when quinine is saturated?

  • @lordsqueak
    @lordsqueak 8 месяцев назад

    Hangon,, what if you freeze the tonic water solid?
    I assume it's not going to make much difference, being almost the same temperature as cold water. But it might have some other effect?

  • @EdgarCorona
    @EdgarCorona 8 месяцев назад

    I liked that little twist during the revelation that it wasn't even baking soda either, nice!

  • @agw5425
    @agw5425 8 месяцев назад

    Would lemon juice boost the fluorescens and how much at what concentration and at what level of quinine does adding more stop increasing the lux given of? Would quinine strait in lemon juice (or other acidic liquid) be even more fluorescent?

  • @azureprophet
    @azureprophet 8 месяцев назад

    With the boiling water experiment, I wonder how much of the variance in light intensity was caused by the presence of steam bubbles in the tonic water.

  • @phizc
    @phizc 8 месяцев назад

    Cool that my comment was featured, even though I was incorrect. 😊

  • @bjarnivalur6330
    @bjarnivalur6330 8 месяцев назад

    FaxeKoni is occasionally available in Iceland.

  • @gwil6100
    @gwil6100 8 месяцев назад

    Cool video

  • @awetisimgaming7473
    @awetisimgaming7473 7 месяцев назад

    This fluorescence gives me the idea to embed an infrared laser to the bottom of a glass bottle, and make "nuka quantum" from the fallout genre, I'll have to make my own video if I get it made, but either way, love the videos!

  • @adriancarreno3661
    @adriancarreno3661 8 месяцев назад

    It would be interesting to see what happens if you freeze the tonic water. Would you get a really bright block of ice? And what if you add acid?

  • @maerten9517
    @maerten9517 8 месяцев назад

    Why not go the other way and add a bit more citric acid and bring almost to freezing and see if that does anything and perhaps to see just how bright you can get it! Thank you for the interesting video.

  • @Jimmhead
    @Jimmhead 8 месяцев назад +1

    Does salt reduce the fluorescence of other chemicals? I tried with the green fluorescent dye in a highlighter and it didn't seem to change at all. I'm not sure what the dye is, possibly fluorescein or pyranine

    • @arcanealchemist3190
      @arcanealchemist3190 8 месяцев назад +1

      at the very least, salt should reduce the fluorescence by simply being an impurity (increased volume of non-fluorescent material in general, diluting the effect). its hard to say for sure beyond that without knowing what mechanism the dyes use to fluoresce.
      this is complicated by the use of a green highlighter rather than a yellow one! since pretty much every yellow highlighter uses pyranine, and only pyranine as its fluorescence source. im fairly certain green would use a mixture of pyranine and whatever blue fluorescent chemical they use, but i know a lot less about that, blue fluorescent dyes seem really complicated!
      pyranine changes its fluorescent properties based on pH similarly to quinine, except at a different and wider range of pH values, making it a potential choice for measuring the pH of solutions. when in an aqueous solution along with salts, i think it exhibits some sort of quenching still, but im not a chemist and all the stuff i could find online simply mentioned that salt interferes with the pH readings when in solution with pyranine. from what i read, it always made the pyranine appear MORE acidic than it should, which means it was quenching, since more acidic = less bright with pyranine. but i might be interpreting that wrong, im pretty bad at chemistry. im basing this primarily off of the free portions of this paper: www.sciencedirect.com/science/article/abs/pii/S1010603008001767
      which says that the presence of salts in their solutions decreased the apparent pKa of the pyranine. with a lower pKa meaning more acidic, that should mean the pyranine fluoresced less. but later, they say that the presence of salts was making the solution overall appear more basic. the only way ive been able to reconcile these claims in my head is that somewhere in the paper, theyre subtracting the apparent pKa of the pyranine from the solution, and since that pKa reading is more acidic than it should be, the remaining solution is appearing less acidic, or more basic than it should be. which makes sense, when using pyranine to measure the acidity of something, you want to be able to mathematically eliminate the added dye from your solution, since you likely dyed a sample of a larger solution and dont want the pyranine included in your final result.
      as for the blue dye, thats where my research kind of got stuck. fluorescent blue dye in markers seems to be usually a mixture of non fluorescent dyes and brightening compounds. essentially "stealing" the fluorescence of other compounds and reflecting them into the blue spectrum. i assume that means they'd just add non-flourescent dyes to yellow dyes to make it green, but there is a lot less information on that, at least that i could find easily. blue fluorescent compounds are generally not as affective at converting ultraviolet light in to blue light anyways. since we are taking the high energy state of ultraviolet light, and moving it the least far down into lower energy color in comparison to the other dyes.

  • @noodlelynoodle.
    @noodlelynoodle. 8 месяцев назад

    I have that exact same scale! The only difference is the lid on mine accidentally broke off when I was trying to remove it thinking it was like my old one where the lid doubled as a larger weighing dish lmao

  • @nekoimouto4639
    @nekoimouto4639 8 месяцев назад

    would increasing the acidity of the fluid and lowering the temperature below freezing increase the fluorescence even more?

  • @ExploringNew1
    @ExploringNew1 8 месяцев назад

    Commenting so algorithm will recommend this more

  • @meloney
    @meloney 8 месяцев назад

    Where did you get your 400 watts UV lamp?

  • @kevincomerford2242
    @kevincomerford2242 8 месяцев назад +1

    Much like you you cooled the tonic water to achieve higher luminance, are there other ways to increase the intensity of the fluorescence?

    • @geirmyrvagnes8718
      @geirmyrvagnes8718 8 месяцев назад

      I was waiting for him to lower the pH to get some more out of it. Getting less is less fun.

  • @johnnewman3221
    @johnnewman3221 8 месяцев назад

    could you make a video about that magical ink which is visible only through purple sun glasses

  • @hellzs
    @hellzs 8 месяцев назад

    would adding an acid make it glow more?

  • @Minecraftmigapiku
    @Minecraftmigapiku 8 месяцев назад

    how about making dye laser out of it and varying environment settings? should be much more sensitive.

  • @herauthon
    @herauthon 8 месяцев назад

    How much energy can it take in before the substance breaks down - and the effects fade ?

  • @riippumatonlinja
    @riippumatonlinja 8 месяцев назад

    If higher ph will destroy luminicity, then how is opposite? Give it extra ph boost with stronger acid to maximise fluorescence?

  • @verebellus
    @verebellus 8 месяцев назад

    Faxe condi is available in sweden and norway too (tho less so)

  • @DiyEcoProjects
    @DiyEcoProjects 8 месяцев назад +1

    Hi Brainiac, can i ask something please. If you placed a double glazed window filled with tonic water over a solar panal... would the Quinine capture UV light in sunlight and energise the solar panel even more?

    • @christopherleubner6633
      @christopherleubner6633 8 месяцев назад

      It would be better to use a redder dye like a rhodamine family. Solar panels have the highest quantum efficiency for near IR light around 800nm. You can use the dye to convert the blue to UV range to longer wavelengths that would increase the output, however you would need to add only enough to convert and not absorb the light.

    • @DiyEcoProjects
      @DiyEcoProjects 8 месяцев назад

      @@christopherleubner6633 hmm... interesting. Thank you for that. All the best :)

  • @dj_laundry_list
    @dj_laundry_list 8 месяцев назад

    3:30 I wonder what effect the C02 coming out of solution has

  • @batchampa
    @batchampa 8 месяцев назад

    My guess was either baking soda or salt, but they were just the first ones I thought of and I wasn't sure why I thought of them

  • @TheSingularNextuz
    @TheSingularNextuz 7 месяцев назад

    That florescent vitamine. Is it the one they used to seak leaks in a heatwater power system in cities?

  • @homerbloodysimpson
    @homerbloodysimpson 8 месяцев назад

    Have tried turmeric in ethanol?

  • @dcallan812
    @dcallan812 8 месяцев назад

    Ah another reason to put ice in the old G&T 😘👌 Very interesting dive into Tonic 2x👍

  • @nakfan
    @nakfan 8 месяцев назад

    Beautiful blue color…. The right music for this could be Kind of Blue 😉

  • @SynomDroni
    @SynomDroni 8 месяцев назад

    Plum juice or wine will flourece if the fruit wasn't washed with soda. The fluorescent part is on the skin of the fruit. You can also polish it of, it's that tint...

  • @viru52000
    @viru52000 8 месяцев назад

    Maybe another video on how to make it even more fluorescent?

  • @jacquesb5248
    @jacquesb5248 8 месяцев назад

    interesting!

  • @johnNJ4024
    @johnNJ4024 8 месяцев назад

    Fluorescence of organic molecules is affected very similarly to the three dimensional isomeric structure and degree of activity of protein enzymes in that the pH and concentrations of different salts in the diluent solution greatly affects the active sites of the molecule by changing the behavior of the electrons and where they tend to reside in the molecule.

  • @Mick.Spanner
    @Mick.Spanner 8 месяцев назад

    Ouzo,the Greek spirit also reacts I think?

  • @Lampe2020
    @Lampe2020 8 месяцев назад +1

    I actually tried to guess but didn't write a comment because I had no idea what it was that stopped the fluorescence of the quinine…

  • @ComfyCherry
    @ComfyCherry 7 месяцев назад

    yay I guessed right (tho due to this video already being out didn't bother commenting there)
    at first looking at it it just kinda looked like bicarb and then the fizzing reinforced my guess, my 2nd guess was salt due to the size of some of the clumps.
    I originally left out the 2nd guess part because it felt like too much then watched further to find out yup salt...

  • @kikakuvr4198
    @kikakuvr4198 8 месяцев назад

    Stretching the definition of "drink," peanut butter has a nice green glow when illuminated with UV light. Oh! Peanut butter milk shakes! Especially since the fluorescence persists for longer when the peanut butter is cold...🤓

  • @lasselkker8669
    @lasselkker8669 8 месяцев назад

    Elsker din tydeligt danske accent 😂

  • @AntimatterBeam8954
    @AntimatterBeam8954 6 месяцев назад

    I remember quinine having some interesting chemistry when it reacts with an electron donor?

  • @kateonianlaw1127
    @kateonianlaw1127 8 месяцев назад

    I would not say I know of any drinks that fluorescence in UV, but peanut butter, pumpkin seed oil, and toasted sesame seed oil does.

  • @ThunderChunky101
    @ThunderChunky101 8 месяцев назад

    Used to fascinate me as a kid when my dad was drinking gin and tonic.
    "the bubbles glow! Can I have one?!" 😂

  • @Macialao
    @Macialao 8 месяцев назад

    My first guess was some kind of a quencher. I don't like the idea of assigning quenching abilities to anything that lowers the fluorescence intensity - or turn's it off completely. Increasing a pH is main ability of NaHCO3, and changing the structure of quinine to the one which is not fluorescent is a byproduct (or a result of a change in medium pH). Whereas it does lower (turns off) the fluorescence, we are speaking of different chemical that had undergone acid-base reaction, thus I don't like naming any pH modification substances as quencher. For me proper quenching would be a molecule that is either reacting with excited quinine (dissipating the energy via chemical reaction), or absorbing the fluorescent light and then dissipating it via thermal or chemical reaction means.
    I didn't watch entire of the video yet, nor this comment is referring to the content. I want to provoke a academic discussion, because both my studies and wikipedia taught me that NaHCO3 would be a quencher, regardless of the quenching mechanism. Open to discuss this topic!!

    • @Macialao
      @Macialao 8 месяцев назад

      So at 6:27 you are mentioning the exact issue I have with current quenching definition. Quinine can have different forms pH dependent. My problem is that for example HCl and NaCl solutions are totally different, we don't say NaCl is the same molecule as HCl after adding NaOH. For organics same argument goes for acetic acid and sodium acetate. So why should we name a product of quinine reaction with a base, different form of quinine?

    • @Macialao
      @Macialao 8 месяцев назад

      And for NaCl, i totally agree. NaCl (in my modified definition) is a proper fluorescence quencher.

  • @MasterNyx
    @MasterNyx 8 месяцев назад

    I wonder how close that tonic water glow is to cherenkov radiation.

  • @PushyPawn
    @PushyPawn 8 месяцев назад +1

    What a monster UV light, what was its original intended purpose?

  • @katranian
    @katranian 8 месяцев назад

    Love it.
    Would like to see some experiments with potatoes!

    • @brainiac75
      @brainiac75  8 месяцев назад

      Glad to hear - and thanks for the early watch :) Potatoes? That's a challenge to make interesting but I will give a think. The potato battery is almost too mundane these days ;)

  • @JakHart
    @JakHart 8 месяцев назад

    Beer has fluorescence, and quite nicely too. (Even black beers!)
    This is caused by amino acids.
    Kinda weird, and super cool.

  • @JohnnieHougaardNielsen
    @JohnnieHougaardNielsen 8 месяцев назад

    I was "waiting" for you to add acid, to see what (if any) difference that would make 🍋

  • @shavranotheferanox7809
    @shavranotheferanox7809 6 месяцев назад

    i realy want to see a nile red or nile blue video where he extracts the quinine and makes other drinks fluoress

  • @dain1s
    @dain1s 8 месяцев назад

    @Brainiac75 What if you put the tonic water in to the freezer?

    • @dain1s
      @dain1s 8 месяцев назад

      Or... What if you make the solution more acidic?

  • @rosetta_diabolo
    @rosetta_diabolo 7 месяцев назад

    Which would remove the fluorescence more? Salt or baking soda? Btw, probiotics, curry and collegen powder are fluorescent under uv

  • @ehsnils
    @ehsnils 8 месяцев назад

    How about ice cubes of tonic water - will they still be fluorescent?

  • @jgplayz
    @jgplayz 6 месяцев назад +1

    Try Monster or Rockstar energy drinks as they contain high levels of vitamin B which should glow

  • @dolamskudoiski306
    @dolamskudoiski306 8 месяцев назад

    Mountain Dew can fluoresce a bit, Or- at least it looks brighter than it should in a black-light.