Kicad Beginner Tutorial- A Traffic Light for Arduino ( RE-UPLOADED, Twice )
HTML-код
- Опубликовано: 7 авг 2024
- This Video walks through the basics of KiCAD and hopefully gets through some of the more confusing concepts in a casual tutorial.
This is the RE-RE-UPLOADED version. A long time subscriber @mackoccour (sp?) let me know that I screwed up in the previous upload. I took me 4 tries to get it right. My video editor was just hating on me.
Well this is it I'm leaving this version up, it is what it is. :)
SUBSCRIBE at : ruclips.net/user/mathcodeprint...
Become a Patron : / mathcodeprint
Follow on Twitter: / mathcodeprint
Follow on FaceBook: / mathcodeprint
More at: www.mathcodeprint.com/
Good video. But shouldn't you do routing on the back plane when you are using THT components. You are placing components on both sides and this requires vias. Your way could lead beginners the wrong way.
I pinned your comment to the top. Thanks for pointing this out. I am a beginner, trying to find my way and giving a beginners perspective to others. Thanks for checking in on us noobs :)
That's actually wrong. THT components (unlike SMD components) get electrically connected to both sides of the PCB so you can do the routing on either. The way it's done in the video is perfectly OK.
Thanks Honza !! 😁😁😁
This is what I needed. Simple and basic. And most of us who are searching for this are not advanced. From these fundamentals we can build on them. Thanks for the simple and easy to understand tutorial
Thank You! I cannot believe how hard it was to find a good Kicad tutorial from a native English speaking youtuber. This is exactly what I needed.
Thanks, I am trying to pick more subjects as well.
The best!! You are a natural teacher. You covered the basics, didn't get bogged down in the small details , and you showed the basices for getting a board designed. Thank you for the absolute best intro video out there.
Thank you so much for this presentation. It is very well laid out for the beginner and was easy to relate to version 6.0. I especially appreciate that the video is an all-in-one and not drawn out over multiple sessions. Thanks again, liked and subscribed.
Thanks for making this tutorial. I've been looking at a proper introduction to KiCad and PCB design for ages and most of the stuff out there isn't this comprehensive or explained in simple English! You just helped me restart a breadboarded project that has been collecting dust for over a year because I couldn't find a proper tutorial.
Great Kicad tutorial! I like the way you cover short cut keys and general workflow using a simple example. Very noob friendly!
Perfect tutorial for beginners. Loved the way you taught multiple ways to assign footprints. Thank you so much!
Your welcome. It was so confusing to me at first so I figured ...
I LOVED IT TOO MUCH
this is the only tutorial that I wished was longer
A very helpful video! From knowing nothing about KiCad to being able to design a PCB for my pet project in 20 minutes! Thanks a lot!
Thank you for the video. I have watched many kicad videos and their examples always are too complicated for a tutorial.
A nice simple layout with just the basics is what I needed.
Finally a REAL KiCad tutorial ... THANK YOU! Looking forward to seeing more from you!
Wow. Thanks ☺️🤩
I've hunted around for a good tutorial... this is the best beginner tutorial for kicad I've found. thank you !!!
Excellent introduction to KiCAD with many insightful tips. Thank you.
Best tutorial I've seen yet. You took your time to teaching as opposed to others. Thanks so much.
This was really helpfull, I'm commenting so more people see this video. In college now and this helped me a lot since I want some more practical knowledge and skills. Thanks for making this
Great tutorial, exactly what I needed to finally get started on some PCBs!
Fantastic explanation, thanks so much. Kicad is rather intimidating, and you've helped me understand the workflow a lot better.
This is a great way to start with a simple LED circuit. This reminds me of the first circuit assembly I made. Thanks man!
Thanks for taking the time to make this vid. Much appreciated :-)
Thanks for that video which made my effort for another board easier. My first time using cad as I need it to repair an amp I have. Handy for work too.
Thank you for this tutorial! I couldn't understand the basic schematic -> pcb workflow but this makes perfect sense!
Woa this is just the tutorial i needed/wanted ^^.
you have a very nice and clear voice, thank you for being my introduction to pcb design! :D
Thank you, just what I was looking for to get started!
Excellent video , I learn more every time I watch.
Great tutorial. Thank you so much!! I will try to do a video for Kicad V6, because there are different changes.
Thank you for lifting the curtain on Kicad for me great video going to follow it in Kicad tonight
Thanks for the Tut. Very informative,
I learned something even from the mistakes I made as I following along. I messed up some tracks and wanted to *rip tracks up.* Eventually I found it was to *highlight the track and hit the Backspace key.*
Also in the Schematic Assign Footprint stage one can select/highlight the assigned one and copy it with a right click, select copy and then select paste into the next component, instead of going to look for it in the library again. Also one can select and delete a wrong assignment too.
many thanks! very good entry method
Super helpful to connect all the pieces of this software for a beginner. It looks like a lot of the icons in the software have been updated since you recorded this, but it still has great value.
this is much better than proteus. thanks for such a great video.
Thanks for this informative video. For a while, I've been wanting to design a mini-amplifier using a LM386 and wasn't sure what design software would make it easier for a novice like myself.
This would be great for anyone getting into electronics at high school. I remember when I did a Technology class we made a bi-stable LED flasher circuit and had the PCB’s produced. I didn’t understand how it worked at the time but it was so cool to make something and all it needed was a 9V battery - all analogue!
I started this video with that circuit. I changed as I wanted an even simpler circuit and liked the idea of bringing in addition. Maybe next video should be flasher :)
Thank you for good and simple tutorial!
Thank you very much! very useful , step by step
I am experienced with Kicad , but I watched anyway and this is a valuable tutorial...cheers.
Thankyou so much :)
Thank you very much...youi took me from zero to hero in 22 minutes
Excellent tutorial. Appreciate it
Thanks a lot sir. Greatly benefitted from the video😊
Good tutorial. Thank you. : )
Just finished this tutorial. You're a G.
Great tutorial! Does anyone know a good tutorial how to virtually test a circuit board in KiCad?
Thanks for the introduction :)
Amazing video. Thank you.
This is a helpful tutorial for a beginner. You are using multiple screen. That's why you cant dock the KiCAD window at left side as I think.
Thank you for this great video. I'll be using it as a reference to make a custom Raspberry Pi Hat for my project.
Creative video, thanks :)
Thanks!
Excellent. Thanks
You could also add a copper plane that connects to e.g. ground. This way you can omit routing all common ground wires, they would just connect to the ground plane directly. Makes it easier to route other things with less non overlapping wires etc.
Thanks! I will try to use that next time around. Seems so obvious, but I don't know what I don't know :)
@@mathcodeprint I didn't know about it either until recently. Happy to share :)
Thank you!
Awesome video. I tried watching another video and he was going so fast I couldn't keep up. Even with pausing ti was a pain. Could you do a very quick video on how to convert this to the files necessary to send to JLPCB. Another problem I had was I have kicad 8 so a few things were in different locations. I had to hunt for the text tool.
I don't know if you are going to see this or maybe at this point you already know but I can give you advice not to use right-angle PCB traces as you did on routing D1 to R1. Corners cause reflections and can impact the signal quality. In this examples you do not have signals that transport data but if you do design a board where you send bits on traces you should keep that in mind. Great video btw :D
Good info! Thanks. Had an idea that corners where bad, i did not know about signal reflection.
You gotta make more KiCAD project videos!
I hope to, trying to discern my way forward. :)
When you choose a symbol the footprint shows in the dark pane and you can use the 3d viewer. I am using kicad 6 and the pain says footprint not selected. What must be done to have the footprints show in that page.
Good video, thank you...
im a beginner with pcb.. i want to make a keybaord... so did i get this right.. u first have to list all components and their connections in the "white" screen and then u have to design the pcb in the "black" screen and place and wirte the created components on it?
Good video. What version of your kiCAD? My kiCAD can't show the 3D design of my pcb and component design. I use kiCAD version 8,can you tell me how to show the 3D?
challenge, redesign this so that only three pins are required without using any additional components, just a simple rewiring change (pro tip: I can do this, so it is possible!)
good video, i need to ask, why did you use all red, lines for the positive and ground wires? when you could have used green for the positive, i am confused, is it because you wanted all the traces on the lower side?
thanks.
Yes, i was trying to keep traces on one side.
Thanks for the video. Is there any way to choose desired LED color for 3 D view?
Size matters...not colour.
Yes. But not easy. You have to modify the model if it doesn't exist. Afaik
Thanks for this lesson, i am a beginner
When placing a component in Eeschema, how do you get it to connect to the dots on the grid?
Snap to grid should be enabled by default. If not you can enable it. Right click a component and select align to grid when things are not working. You can set grid size in the right click as well.
hello, how can I add footprint for "GND" symbol
assigning PCB footprint "manually" at the schematic level seem very painful!!! what if you had a schematic with 50 different "part types" ??
the components pins that do not have a small ball on it, are conected to the component ?
Correct, the green "wire" connects directly to the component. Where you see a green "Ball" indicates the "wires" are connected. Whereas if two wires cross with no junction ( green ball ) there is no connection.
Can you save it as jpg format ?
Thank you, board of more than two layers, four layers or more
@ 7.52 you do "FootPrint" a different way, but you don't show us how to get that tool ???
Thanks, sorry about that. It is a confusing topic. I think a KiCAD footprints demystified video is overdue.
I wish my footprints were that easy. I had to upload them into the program and it all looks nothing like yours
Please sir how can I get this software?
Please kindly help me the link to download thanks
I love ur tutorials
kicad.org/download/
@@mathcodeprint thanks so very much sir
Simple basic video yes but nonetheless you cover lots of good key features, Come to KiCad from Eagle, your video helped! Thank you
How did you get different colored LEDs in 3D? I have not been able to find any other color in KiCad for those LEDs other than red.
I made them. I'll try to post them for ya. Basically it is a model i made in freecad and just set the colors.
@@mathcodeprint That would be great. I was really surprised that I could not find colored LEDs in any KiCad libraries and I’m too much of a newbie to know how to make my own models or design component footprints.
Which KiCAD version is this one ?
He sir how I can edit the led is color to make it green red and yellow like this one in the example that had shown
I tried several times and can’t edit the color of it this make me lose my mind 😂
coolest
List of components plz?
Why do wires sometimes not snap to the component leads in Schematics?
Same question i have
I have this happen as well, I don't have a good answer off the top of my head. I believe it happens when your snap distance is changed from the default and now no longer lines up. To fix it I usually change all the measurements back to 2.54 mm. If I nail down the issue I will post a video.
@@mathcodeprint cool.
mine doesn't show the actual component on the board like yours.
Not sure why, but it might be the version of KiCAD, also there is a setting in the Render that can turn off componenets. Finally, you have to have the 3d model library path added in the library manager. ( It was set for me but who knows )
How can you resize the symbol you just created?
There is no resize for the symbol but you can zoom in on the document.
@@mathcodeprint That doesn't help. I need to make a new symbol with the same proportion to the other symbols.
How do you add 3D to your new custom component?
I added a brief video on how to do this, but basically you use the Library Manager for Components ( PCB Parts ) and add an entry in the 3D Tab that points to your file.
@@PaulRandallMaker Will try that.
In the video you turned the resistors around and you said it was because it would make it easier to hook up the traces. The resistor footprint looks symmetrical and polarity doesn't matter, so why did flipping it around make it easier to hook up the traces?
Thought I answered this, but I guess not. I think I moved them around so they where physically arranged for a better trace. Even there there is no polarity, the ratsnest lines come from the schematic. New users like myself seem to just want to make sure all the ratsnest lines are hooked up. So when I see ratsnext lines crossing I just mentally want to uncross them. I think you are 100% correct and I didn't need to rotate them, but I think that ability to say, hey this component has no polarity I just just wire this ether way is something a first time user may not comprehend. I hope that makes sense.
de ce nu se afișează componentele in 3d wiew
What was the reason why you connected all of the LED's and then connected that wire back to the connector symbol? - big noob here
Additionally, why did it matter for the number 1 connection to be on top and that one that received the wire that connected the 3 LED's?
Beginning of the video, you have 3 colors of LEDs(Green, Yellow, Red).
How do you assign the color of them?
I had to create custom 3d models. I took the step file and changed the color.
@@mathcodeprint I see.... I was wondering where I can find it but it was a custom-made. haha. Thanks.
Can you SHOW me how to start off with the ground plane first, on the pcb? ALL on one side of the pcb! No one can make a video and show me how to do this. Is it that hard to do? The circuit has 50 components.
Just found your comment, I am not qualified as yet to do ground planes. My style is teach as I learn, so that I communicate from a "noob" perspective.
@@PaulRandallMaker No problem. I found out how to do this.
you have been using linux mint
If I look at the schematics and I look at the PCB then they don't match:
Pins 1-2-3-4 of the connector in the schematics are replaced by 11-12-13-14 on the PCB
Pin 11 of the PCB is connected to R3, where pin 1 in the schema is GND
If you want to explain something, especially something so basic to beginners then make sure you show the right stuff, something which goes together. The way you made the video will nly confuse those beginners.
Also, to get a good video you have to prepare your story: what do you want to do, how do you do that, step by step. It will become a much more professional video.
GRACIAS.........👉 👷🇨🇱
👏👏👏👏👏👏👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍👍👍👍💆.....................👉 🍷