The thought of what will happen should the chuck loosen up and drop the bowl onto the blade, which is spinning toward you, is enough to make me say that this idea is best left for those with a death wish.
Ну да обжегшись на огне дуют на холодную воду. Бортики станка защитят ваше бренное тело. А душу,? так она у вас и так в пятках, как у трусливого зайца.
That's not all. When he was sanding the piece of wood, he didn't lower the saw blade so it was hidden below the table saw. One slip and his hand may have driven into that blade. It's how you lose fingers.
Yo lo tomo como una muy buena pauta para hacer algo que me apasiona. Yo veo el canal por años y para mi es muy bueno y si toma la seguridad en serio. Sus proyectos son super geniales...
Простите: - но мастер , Вам показал сразу как смастерить станок - согласно Библии он дал вам в руки удочку. Мастер показал как работать на этом станке , то есть показал как поймать рыбу. Как изготовить блюдо для приема пищи и для продажи, то есть приготовил вам ужин и пригласил к столу. Вопрос:- что здесь не понятно? Какие ещё ассоциации может вызвать видео ролик?
Hola. El maestro que comparte con nosotros todos estos trucos, es genial. Le agradezco mucho sus programas, sin embargo, y con todo respeto, creo que debía usar los elementos necesarios para su protección. no quisiera que tuviera problemas por el no uso, por ejemplo, de gafas al usar la sierra. Un brazo
La ideas puede ser muy buenas pero el riesgo de causar un accidente caseros es seguro 🤔 sera util esta herramientas casera para los que trabajan con la madera oh es pura lampara 🤔🤔🤔❓❓ cuál es la respuesta
Well, if the sandpaper fell from his hand and he caught the spinning wheel in contact with his hand, it could potentially force his hand down to the table saw blade still elevated, looks like a recipe for disaster! Looks like he didn’t see the danger of the saw blade,and you wonder why he lost part of his finger!
So this jig he constructed was for rounding off a piece of wood. To make a bowl supposedly? It's also dangerous. And how would you use it to carve out the inside of the rounded piece? I think it would have been easier to just use the lumber and the drill to make a lathe. There are videos available that instruct you in how that's done. Then a person could carve the inside of the wood as well as the outside to make a bowl.
Век живи, век учись , в вашем случае все равно дураком помрёшь... Выполнение любой работы своими руками - вне времени... Потому как вас никто насильно не заставлял смотреть это видео до конца.
Anyone watching this waste of time and thinking it's useful and not dangerous might be the fool. The video doesn't show the finished product, is very dangerous to follow, and of no use to a real woodworker.
'Yo mismo no puedo creelo'...que este hombre haga inventos tan peligrosos... Con todos y cada uno de sus inventos es posible que pierdas una mano o hasta la vida.
Qualquer ferramenta, principalmente giratória, à bateria ou elétrica, oferece riscos para quem a opera. Um cinzel, uma serra manual, até um inocente martelo, pode ocasionar acidentes. Uma senhora aparando suas sobrancelhas com uma pinça, pode furar um olho, se for descuidada o suficiente para tal. Um bom profissional sabe como fazer seu trabalho.
@@1acroyear1 You know what? I can think of a use for it. Unfortunately, it's an elusive project concept for me at this time. There are too many other things getting in the way of that specific project.
Everyone is thinking WHY. When you could get a used lathe for a few hundred dollars. VIEWS, PEOPLE LOL. We all watched it, and now he can buy a lathe :)
I have to be honest, a good idea maybe but absolutely far too dangerous to do this on a table saw. just watch table saw disaster videos, you will not sleep, i can assure you of that. when I use my table saw, that thing has my full respect, i would never attempt anything so dangerous, as if using a table in its approved standard function isnt dangerous enough. just don't do it guys. and to the author, hats off you come out of this alive and with a great result too but, man! that could have ended up badly for you. lets just hope that nobody copies you on this idea because you may be looking at a legal damages if they get hurt or worse. you may want to append the start of this video with a disclaimer just to inform what your doing is highly dangerous and should not be attempted at home. dont get me wrong, the lesson was great but the method was not worth the risk in my opinion, but of course, each to their own. All the best
I've been in the woodworking industry for 36 years and I thought that this was very interesting and Ingenius. I've done similar things on the table saw, band saw and with routers. But! I've always used safety measures and I've never drawn blood with a power cutting saw (and I still have all of my fingers intact). This video is absolutely NOT for beginning woodworkers. A good idea, if done properly. This wasn't.
Nice video. Except what is this for? Maybe we might have been less critical of it if we had seen the finished product. What is it? A shallow bowl? A wobbling coaster? A waste of his time and the time of anyone watching. And dangerous too.
Хобби
Lo felicito usted es un excelente maestro, muy agradecido por su aporte al conocimiento de los aprendices, muchos éxitos
The thought of what will happen should the chuck loosen up and drop the bowl onto the blade, which is spinning toward you, is enough to make me say that this idea is best left for those with a death wish.
The dude is missing a finger, gee i wonder how that happened.
@@mikemilnes7093I wonder what's next... ¿Another finger or worst?
Ну да обжегшись на огне дуют на холодную воду. Бортики станка защитят ваше бренное тело. А душу,? так она у вас и так в пятках, как у трусливого зайца.
And chucks loosen no matter how tight you try to make them.
That's not all. When he was sanding the piece of wood, he didn't lower the saw blade so it was hidden below the table saw. One slip and his hand may have driven into that blade. It's how you lose fingers.
Yo lo tomo como una muy buena pauta para hacer algo que me apasiona. Yo veo el canal por años y para mi es muy bueno y si toma la seguridad en serio. Sus proyectos son super geniales...
🎉 então mas para que serve essa peça que ele fez que eu não entendi
Well, I, for one, appreciate the demonstration of the type of woodworking skills that caused the loss of one of your fingers....
I think it would be a good idea to totally lower the circular saw blade prior to sanding!
Muy increíble felicidades
Great way to generate sawdust.
Для ваших мозгов....
Muito bom mesmo parabéns pelo seu trabalho
What on earth did he create? And for what purpose? Would it have been safer and more useful to buy a small lathe to do something like this?
Простите: - но мастер , Вам показал сразу как смастерить станок - согласно Библии он дал вам в руки удочку. Мастер показал как работать на этом станке , то есть показал как поймать рыбу. Как изготовить блюдо для приема пищи и для продажи, то есть приготовил вам ужин и пригласил к столу. Вопрос:- что здесь не понятно? Какие ещё ассоциации может вызвать видео ролик?
@@anutarigaya486 Wordy yet dumb response.
It's a bowl
They say there's a fine line between genius and madness...
absolutely hilarious
Que grande maestro
que buena herramienta usted hace que se vean las cosas fáciles, felicidades quedó excelente, saludos desde Oaxaca, México
This is some Shop Smith quality jigging there! Love it!
Hola. El maestro que comparte con nosotros todos estos trucos, es genial. Le agradezco mucho sus programas, sin embargo, y con todo respeto, creo que debía usar los elementos necesarios para su protección. no quisiera que tuviera problemas por el no uso, por ejemplo, de gafas al usar la sierra. Un brazo
WTF.... you never get to see what this turns out to be???????? BOGUS.
And never get to see him lose another finger!
Best idea. 👌.
So, is this how you lost your finger?
Shake hands with danger!
La ideas puede ser muy buenas pero el riesgo de causar un accidente caseros es seguro 🤔 sera util esta herramientas casera para los que trabajan con la madera oh es pura lampara 🤔🤔🤔❓❓ cuál es la respuesta
Very clever... Thanks a lot...
What is the part for ?
I fail to understand the purpose of it
It’s for making sawdust!!
The purpose I suspect is to get you to watch the video.
It's a bowl
Me interesa mucho
Have you ever considered a course on shop and tool safety?
So, unless I've missed something, you've done the same job as a lathe. Why not just set-up the drill to be a lathe?
Con torno sencillo es mucho mas rápido y con un acabado perfecto por que se complica la vida? Yo hago platos con el torno es lo mas sencillo.
Crazy invention.
I kept thinking, "This seems so dangerous," and then i noticed the missing finger. 😲
That’s pretty cute.
ขั้นตอนฝัน❣️
ฝันร้าย
A mini drill press was so close....but you deviated.
How often would I require that shaped wood? Never
I figured it out!!! This so called "wood worker" is Rube Roldberg!
What could possibly go wrong?
Well, if the sandpaper fell from his hand and he caught the spinning wheel in contact with his hand, it could potentially force his hand down to the table saw blade still elevated, looks like a recipe for disaster!
Looks like he didn’t see the danger of the saw blade,and you wonder why he lost part of his finger!
It's a birth defect.😂
This is amazing!!! It's both brilliant and dangerous!!!
Pretty good video. Well done. The idea? Not so much.
Amigo parabéns só que vc esqueceu de passar as medidas do que vc fez. Marcenaria tem início meio e fim.valeu campeão
Anyone notice the missing piece of index finger on the left hand?
Oh ya, that doesn’t seem dodgy at all.
So this jig he constructed was for rounding off a piece of wood. To make a bowl supposedly? It's also dangerous. And how would you use it to carve out the inside of the rounded piece? I think it would have been easier to just use the lumber and the drill to make a lathe. There are videos available that instruct you in how that's done. Then a person could carve the inside of the wood as well as the outside to make a bowl.
Did go through all that work to have that little router cap like that come on man
Well, that was 12 minutes of my life wasted that I'll never get back.
Век живи, век учись , в вашем случае все равно дураком помрёшь... Выполнение любой работы своими руками - вне времени... Потому как вас никто насильно не заставлял смотреть это видео до конца.
So, is he making a bowl with his completed jig fixture or just wasting our time???
Anyone watching this waste of time and thinking it's useful and not dangerous might be the fool. The video doesn't show the finished product, is very dangerous to follow, and of no use to a real woodworker.
Yeah reading your post was time I will never get back!
Waste of time? You need to learn about RUclips fast forward.
I only wasted three minutes 😅
No entiendo por qué debe "hamacar" el trápano cuando hace alguna perforación.
Для того ,что бы получился овал...
brilliant
Então eu assisti o vídeo mas não entendi para que serve essa peça
No entendí, que pieza o trabajo en madera hizo?
Does no one use glue anymore?
Gee, I wonder how he lost that finger...
А так , шел по дороге пальчик и отвалился.... Что совсем тупой ? или кто доплачивает за тупость?
Or only "one" finger!
OK, so what is it and what is it good for?
Nothing and nothing.
'Yo mismo no puedo creelo'...que este hombre haga inventos tan peligrosos... Con todos y cada uno de sus inventos es posible que pierdas una mano o hasta la vida.
Por eso le falta un dedo.
Ya tuvo su primer llamado de A T E N C I Ó N 😝
Qualquer ferramenta, principalmente giratória, à bateria ou elétrica, oferece riscos para quem a opera. Um cinzel, uma serra manual, até um inocente martelo, pode ocasionar acidentes.
Uma senhora aparando suas sobrancelhas com uma pinça, pode furar um olho, se for descuidada o suficiente para tal.
Um bom profissional sabe como fazer seu trabalho.
How about his left index finger.
Really disappointed there wasn’t any hot glue or duct tape.
Hola puede hacer la guia para aguecarlo por dentro
I thought he was making a bowl at first. What did it end up being?
A waste of time. That's what it ended up being.
@@1acroyear1 You know what? I can think of a use for it. Unfortunately, it's an elusive project concept for me at this time. There are too many other things getting in the way of that specific project.
and why did youtube think i wanted to see this , i'll never know.
Everyone is thinking WHY. When you could get a used lathe for a few hundred dollars. VIEWS, PEOPLE LOL. We all watched it, and now he can buy a lathe :)
Cool but very limited usage.
He lost me when I saw him using a felt marker. No selfrespecting woodworker would be caught doing that.
Trust no woodworker who is missing parts of a finger!
Shortcuts lead to short fingers and I sure don't trust a drill chuck as much you. I can only assume you are making a bowl but that is a just a guess.
Come si riconosce un falegname ? È facile . Basta guardare le mani. 👍😎🇮🇹🤣
It's a drill that identifies as a lathe.
It’s all fun and games until someone gets hurt
I have to be honest, a good idea maybe but absolutely far too dangerous to do this on a table saw. just watch table saw disaster videos, you will not sleep, i can assure you of that. when I use my table saw, that thing has my full respect, i would never attempt anything so dangerous, as if using a table in its approved standard function isnt dangerous enough. just don't do it guys. and to the author, hats off you come out of this alive and with a great result too but, man! that could have ended up badly for you. lets just hope that nobody copies you on this idea because you may be looking at a legal damages if they get hurt or worse. you may want to append the start of this video with a disclaimer just to inform what your doing is highly dangerous and should not be attempted at home. dont get me wrong, the lesson was great but the method was not worth the risk in my opinion, but of course, each to their own. All the best
Kreatif dan menginspirasi.
Buena
Better to use a lath.
I am glad that index finger was not there, otherwise it would have been in the way when you were making that center hole.
Did he really just reinvent the laith? not good enough.
Con razon le Falta un dedo !
Jajajajajaja😂
Nice job surviving through the video. I wouldn't attempt this wearing body armor.
Bel idea,ma è molto pericolosa...
5:37
Holy crap! No joke. This raises credibility issues, like who will watch a cooking show where the chef is skinny?
Person missing digits makes dubious devises. 🤔
Да долго нудно опасно сотни вариантов проще и надежней
Or you could just buy/build a lathe.
Непонятно для чего кернить, если сверло по дереву???
11:17 minutes of Tripe !!..................................
Make sure your insurance is paid
I've been in the woodworking industry for 36 years and I thought that this was very interesting and Ingenius. I've done similar things on the table saw, band saw and with routers. But! I've always used safety measures and I've never drawn blood with a power cutting saw (and I still have all of my fingers intact). This video is absolutely NOT for beginning woodworkers. A good idea, if done properly. This wasn't.
Did RUclips demonitize your video of you sawing off your finger?
Nice video. Except what is this for? Maybe we might have been less critical of it if we had seen the finished product. What is it? A shallow bowl? A wobbling coaster? A waste of his time and the time of anyone watching. And dangerous too.
Not a good or safe project to try
Okay, so you "DOMED" a round piece of wood...what the hell for?...i don't get it. Did i miss something?
The part where he loses a finger fucking around in the wood shop for nothing.
Real Men of Genius....
Waste of time trying to guess what this contraptions does, so turned it off at the first advertisement!!
say something
if your going to spend all the time to make a VID LIKE THIS, PLEASE LEAVE ACTUAL DIRECTIONS LIKE MEASUREMENTS, HOLE SAW SIZE ETC.
Just a novice so
POR HACER ESO Y SIN NINGUNA PROTECCION PERDIO UN DEDO
Una brillante idea que Izzy Swan público tiene más de siete años y tiene como hacer el cuenco
estar lijando con la cierra abajo
y el sentido común donde quedó
how long did he stay in hospital ?
Dude your missing a finger slow TF down😅
LE PAGAN PPR HACER ESO Y NO MAS
I’m sorry, but what the hell is this thing supposed to accomplish?
It's jiust a jig. Not "Brilliant".
What a glorious waste of time!
Brilliant? Nope.
No. Just, no. Wait! I'll revise that! FCK NO! Buy a cheap lathe, or make one out of that drill your already using!
🤔 How did you lose half finger 🤔
buy a lathe for christ sake!!
Sale más caro el caldo que los huevo
what a waste of time, you could get much better results using a lathe
So what the hell is it? That he made? I can do that with my lathe instead of making some contraption first.👎👎