"I normally put a sheet down but not today as I don't have one"... the way your using that roller, you'd need to mask off the whole room!! Ceiling an' all!!
The smaller sponge roller would be better than a fleece roller even if there made for gloss or any oil based paints as you still get little bits of the fleece come off so sponge is better just lay it off the same way
I know everyone is saying he’s rolling too fast etc, but the house looks like a council one, carpet will be going down over splatters, and the paint is oil-based so will settle down to be much smoother before it dries.
@67psych3 Ah, the desperate attempt to promote one’s silly British “class”. the statement about it being a council house is not that the council built it. I think council houses are rock solid. The statement is conditional: since it looks like it’s a government-subsidised house, that means that painter isn’t working for a private client who lives in the home, but the local council who pay him to blast out work, so the quality does not need to be the same as a private, residential client-who may or may not live in a council-built home. If it is for a private client, it still stands that carpet will be going down so spray doesn’t matter.
You should have used a 9x3/8 shed resistant roller. Strained the paint. And laid it off from bottom to top in one direction.Also should have used a drop cloth even if it doesnt matter. Paint everywhere and sugarfooting it around is not acceptable.
Good old candleman gonna try that the wkends,can you recommend a good oil based gloss to get a good finish.. And what's the best brush. Hamiltons perfection or purdy Cheers pal
Just say someone used high gloss on a door that already had a 10 year old gloss paint on it and the old paint started bleeding through, how do you fix this problem? Do you have to sand the interior flat surfaced door until all gloss is off and then use primer first before the fresh coat of high gloss?
I have been painting for 40 years and this is the type of rubbish I have to put rite all the time no trades person would use a roller like that .this is a demonstration of how not to do it
Lee Gingell ...you need to move with the times mate,there's money to be made out there,it's far quicker and easier to roll the door and lay it up like Wallington demonstrated
I use roller sometimes to paint door. Once some idiot kept why use roller that size etc who was even a painter in return told the person who I know stick to your own trade
@@wallingtonfilming no its cus I just glossed my doors an frames an just wondered if I just paint strait on top of the first coat after its dried or do I sand it I dont think it would need sanding again
Even better after cutting in with a brush get a mini gloss foam roller and go over the whole door with that the brush marks will not be visible then and it'll leave a brush mark free smooth surface. Thinning the paint will only increase the chance of drips so don't do that unless a miscoat is being applied to bare plaster
Hi Mark - thanks for the videos - very useful and entertaining. Apologies if you have already got a video on this subject but could you go through the best order to decorate a room using emulsion on walls. I have seen conflicting advice on emulsioning the walls before undercoat and gloss or vice versa?
@@achilles2095 im not a decorator your right but when i used to do refurbes i said to the painter, why you rolling the door then using a brush and he said because the clients want a brush finish 🤷🏼♂️
what did i just watch here? how can this be titled "how to gloss a door very fast"? if you use a 270mm roller, roll the entire door and then tip off from bottom to top with a nice wide brush u can do it in less then half the time. a door like this shouldnt take more then 10 minutes both sides including cutting in the edges
@@wallingtonfilming so what do you use a short pile roller for? What is the advantage, is better for oil based gloss? There must be trade secret other than what you describe as reloading more often... 🕯🍺🚬🧠
This come up on suggestions and the People commenting about the floor 😂house bashing no floor laid get job don’t quick more money it’s a different ball game to private jobs some people are clueless
A lot of people must watch this, brim full of confidence, then advertise themselves as "painters" ! I can do better than this - and I'm an electrician !
If that is gloss you're applying why are you using a mini emulsion roller, a foam gloss roller should be used, and why on earth did you brush the door after you had already rolled it
I agree foam roller. The brush was used to lay off the paint and prevent orange peel. Lay it on lay it off. That should also be done after a foam roller though.
"I normally put a sheet down but not today as I don't have one"... the way your using that roller, you'd need to mask off the whole room!! Ceiling an' all!!
Wtf that looks like a emulsion roller lol. He must have shit load splashes on his face
well, he said it was faster, he never said it was a perfect job, so kudos to him.
🤣🤣😂
You re all crazy.This guy it s a pro.Too good.
pro tip: watch series at KaldroStream. Been using them for watching a lot of movies these days.
Followed your advice on painting flush doors. Really pleased with the results.
Great video, thanks.
The smaller sponge roller would be better than a fleece roller even if there made for gloss or any oil based paints as you still get little bits of the fleece come off so sponge is better just lay it off the same way
Nah oil paint breaks down the sponge and leaves bits in the paint. Can’t beat a good quality fleece roller.
But hey each to their own.
must be a council house, great video thanks
Looks like it
I know everyone is saying he’s rolling too fast etc, but the house looks like a council one, carpet will be going down over splatters, and the paint is oil-based so will settle down to be much smoother before it dries.
@67psych3 Ah, the desperate attempt to promote one’s silly British “class”.
the statement about it being a council house is not that the council built it. I think council houses are rock solid. The statement is conditional: since it looks like it’s a government-subsidised house, that means that painter isn’t working for a private client who lives in the home, but the local council who pay him to blast out work, so the quality does not need to be the same as a private, residential client-who may or may not live in a council-built home.
If it is for a private client, it still stands that carpet will be going down so spray doesn’t matter.
I only use foam roller and purdy brush after. no particles leave .....
You should have used a 9x3/8 shed resistant roller. Strained the paint. And laid it off from bottom to top in one direction.Also should have used a drop cloth even if it doesnt matter. Paint everywhere and sugarfooting it around is not acceptable.
Good old candleman gonna try that the wkends,can you recommend a good oil based gloss to get a good finish..
And what's the best brush.
Hamiltons perfection or purdy
Cheers pal
Is that paint spots on the floor or buttons ? Do you make your own booze ?
3/4" sleeve Leaves a nice stipple finish
Dean Dicrescenzo hahaha i know! Stucco door!
Doesnt matter the roller if hes tipping it off
Just say someone used high gloss on a door that already had a 10 year old gloss paint on it and the old paint started bleeding through, how do you fix this problem? Do you have to sand the interior flat surfaced door until all gloss is off and then use primer first before the fresh coat of high gloss?
Mate you are a pro, great video
i use a foam roller,,usually,what type of roller are you using?,,,,thats the way i like to paint doors!...spot on!
Thank you for that as Ive just bought some foam rollers & was wondering if they were ok to use for this 👍⭐
why aint the paint flicking all up your arm ....it does with me
Paint flying everywhere boii.. bulk overspray
Should have protection for the floor down and i would rather use a foam roller. Other then that not too bad
Ok,but you need to do the brush stroke all the way ,not stopping and starting in the middle.
Thank you for sharing your video
Lmao......I guarantee you there is paint splattered on the wall and floor.....velocity is a helluva drug.....slow your roll.....literally
I have been painting for 40 years and this is the type of rubbish I have to put rite all the time no trades person would use a roller like that .this is a demonstration of how not to do it
Lee Gingell ...you need to move with the times mate,there's money to be made out there,it's far quicker and easier to roll the door and lay it up like Wallington demonstrated
Some say it's not possible to rape a door....
But the Candle man can !
I agree, wrong type of roller for a start and not properly laying it off
@@Clan501-Scotland lol
I use roller sometimes to paint door. Once some idiot kept why use roller that size etc who was even a painter in return told the person who I know stick to your own trade
Thanks..Great video
Morning sweet cheeks! Is there any last minute glossing planned for this week? 👍👎👍
You’ve taken your inspiration from the karate kid.
Used to use a 12" Mohair roller and a 4" brush.. Bosh!
Excellent.
Of the door os already glossed, how much do you sand off ?
one thing I just wanted to ask you is do I do a second coat of gloss after its dried or is it best to just done coat ?
It’s entirely up to you, you can give it five coats of gloss if you want 😂🕯🚬☕️🎅🏻
@@wallingtonfilming no its cus I just glossed my doors an frames an just wondered if I just paint strait on top of the first coat after its dried or do I sand it I dont think it would need sanding again
@@daveogmiles6152 a light sand to remove any bits of dust stuck to it and to help key the following layer on should help.
Well done
Brilliant mate 👍
Looks bit heavy pile on the roller sleeve, maybe a shorter pile roller
Sandra Clay, no chance gets more paint on the door
What color is that? Base white paint without added any color or added light color to base white paint?
Takes me less than 60 seconds to do a door side was it water based paint or oil based 🤔
Shame we can’t see the finish with a glancing light , can’t tell if there brush marks.
Sprayer works a lot better than that duster you tipped that door of f with.
Hey men you forgot to mask the floor.
Or may the floor going to be painted too in 5 minutes..
Candle man.
Really struggle with brush marks in my gloss any tips. Also what are your thoughts on a angled brush for cutting in?? Thanks
Try thinning your paint, angle your own brushes
Even better after cutting in with a brush get a mini gloss foam roller and go over the whole door with that the brush marks will not be visible then and it'll leave a brush mark free smooth surface. Thinning the paint will only increase the chance of drips so don't do that unless a miscoat is being applied to bare plaster
I’d be fuming if that was my door pal... may aswell just chucking the tin over the door 😂
Hi Mark - thanks for the videos - very useful and entertaining. Apologies if you have already got a video on this subject but could you go through the best order to decorate a room using emulsion on walls. I have seen conflicting advice on emulsioning the walls before undercoat and gloss or vice versa?
Preparation, cup of☕️ emulsion, cup of☕️u/coat, cup of ☕️, gloss job done☕️☕️☕️☕️☕️
Proper cowboy.
I need a roller sleeves like this one that roll so fast and splash paint all over the place
Why use such a small roller? A 230 or 270mm would have that done twice as fast
Masonary roller on a door!?!? 🙃
Isn’t the whole point of a roller to eliminate brush marks?😂
No, some people want a brush finish.
@@Kennycheeseman on a gloss door? Can tell your a handy man not a decorator
@@achilles2095 im not a decorator your right but when i used to do refurbes i said to the painter, why you rolling the door then using a brush and he said because the clients want a brush finish 🤷🏼♂️
what did i just watch here? how can this be titled "how to gloss a door very fast"? if you use a 270mm roller, roll the entire door and then tip off from bottom to top with a nice wide brush u can do it in less then half the time. a door like this shouldnt take more then 10 minutes both sides including cutting in the edges
Well it's a 3min 33sec video and he's done one side while talking etc. So it would be under 10 mins wouldn't it champ?
Damn he was putting alot of pressure on roller it sounded real rough mate.
Wooden floor knackered
mini skuttle?
Candle man don’t you supposed to use a short pile roller for glossing?
Is that oil/water based gloss? 🕯🚬🍺🍩
The shorter the pile the more you have to keep reloading it,
Self explanatory and commonsense prevails 🤣🕯☕️🚬
@@wallingtonfilming so what do you use a short pile roller for? What is the advantage, is better for oil based gloss? There must be trade secret other than what you describe as reloading more often...
🕯🍺🚬🧠
Seen less lines at a railway station
3 mins to do a door, It took me 40 mins and still got 10 more to go. Wonder if this guy could travel to the West highlands and bail me out,
Guessing you just finished the doors mate 👍🏻
why do you choose the long pile roller? I've been using a foam roller for the last 10 years or so. am i missing out?
Dan Bennetto
Long pile roller puts more paint 🎨 on the door 🚪 hence faster no brainier
Dan Bennetto
The video tell u why speed
Do you get paid for doing this?
👍👍👍👍👍👍
Rolls it on then put brush strokes all throught it??? 🤦♂️
Is that water based gloss or oil, the gloss rollers here are made of sponge do dulux do a different one.
Oil
Peter Miller , oil mate why would anyone us a foam roller they are crap
Peter Miller , oil mate why would anyone us a foam roller they are crap
wallingtonfilming The Candle man
when do you second coat a gloss door, ? when it looks transparent first coated ! should I put a Base coat on first? with something else
JAJAJAJA
PAINTING CONTRACTOR OF AMERICA.
THAT'S WHY MAKE AMERICA GREAT AGAIN.
Hello. I have question what rooler you used to gloss paint . Thanks
Pawel Mroczek go
A blind man could hear the orange peel on that door.
This come up on suggestions and the People commenting about the floor 😂house bashing no floor laid get job don’t quick more money it’s a different ball game to private jobs some people are clueless
Ah, you do lay it off with a brush. Nice.
trust me ive seen a lot worse... 9 inch roller please next time.
does this guy know how to paper hang or is he just a brush hand?
Voice not clear
If you're going to roll it Mohair
what about the door edges?
Che Monro keep up dumbo,,he said he did them prior to the video,! 😂😂😂
You use the door edges to scratch your back. You do those last.
Understand why USA is going down...
40 year ago did they have rollers 2 do the coalmans homes
Is that waterbase?
gezzabell no
wallingtonfilming The Candle man can you do this with water based as I've got 10 flush doors to gloss. More than 1 coat I imagine??
Hi mi God.!!!!!
Rough as fuck. No wonder you're on sites.
A lot of people must watch this, brim full of confidence, then advertise themselves as "painters" ! I can do better than this - and I'm an electrician !
i think you should be called the plot basher
Ruhe!! ist nichts für anfänger Augen
Takes too much time
omg
What a joker
needs subtitals
That job looks completly messy lads. Do you call yourself painter's... sad to see trades men take short cuts
If that is gloss you're applying why are you using a mini emulsion roller, a foam gloss roller should be used, and why on earth did you brush the door after you had already rolled it
I agree foam roller. The brush was used to lay off the paint and prevent orange peel. Lay it on lay it off. That should also be done after a foam roller though.
@@Clan501-Scotland You don't have a clue, stop acting like you do
how can this guy make money he spends more time making video's and giving the wrong advice than he does working
Absolute amateur.
do this if you want the shit look!😂
Dodgy painter:))
Cringe
Jajajaja this lunatic Is to dangeros.