Это видео недоступно.
Сожалеем об этом.
How to Pour a Concrete Front Porch Sidewalk (DIY Curved Concrete Sidewalk)
HTML-код
- Опубликовано: 4 мар 2023
- Learn how to pour a concrete front porch sidewalk with this DIY Step-by-Step Video. Specifically, learn how to pour a DIY curved concrete sidewalk for a front entryway using dry concrete mix.
To Pour a DIY Concrete Sidewalk, you will need the following tools and materials:
- Concrete Finishing Trowel: amzn.to/3Za9tHu
- Concrete Edging Trowel: amzn.to/3m2KQh5
- Concrete Grooving Trowel: amzn.to/3IDNi5x
- Concrete Finishing Broom: amzn.to/3kIa8kh
- Dry Concrete Mix: www.ctscement....
- Concrete Mixer: www.mudmixer.c...
- Concrete Forms: Harboard or 2"x4" lumber
- Stakes: amzn.to/3xZMqDb
Below are the General Steps for Pouring a Curved Concrete Front Porch Sidewalk:
1. Demolish the Existing Sidewalk (if applicable)
This video will show you how to demolish an existing concrete sidewalk using a jackhammer.
2. Prepare the Area for New Concrete
Typically, you will want a 4" thick concrete sidewalk and a 4" thick gravel subbase. Excavate the area as needed.
3. Build the Concrete Forms for the Sidewalk
Construct the concrete forms using 2"x4" lumber or Hardboard (ripped down to 4" strips) if you are building a curved sidewalk.
4. Mix up the dry Concrete
For this specific DIY Concrete Project, I used Rapidset's 24/6 Concrete Mix and I Mixed it using the Mud Mixer.
5. Apply Concrete to the Forms and Screed the Concrete Surface Flat
Fill the concrete forms with concrete and then use a flat piece of lumber to screed the surface of the concrete flat.
6. Finish the Surface of the Concrete Sidewalk
Use a concrete finishing trowel to finish the surface of the concrete so that it is smooth and even.
7. Use an Edging trowel to "Round Over" the edges
Run a concrete edging trowel between the edge of the concrete and the forms to give the concrete a nice rounded edge.
8. Add control joints (if applicable)
If you are pouring a large concrete sidewalk, add a control joint with the use of grooving trowel.
9. Apply a Broom Finish to the Concrete Surface
If desired, use a concrete broom to give the surface of the concrete a "broom finish". This will give the concrete a textured look and will make the face of the concrete non-slip.
10. Allow the Concrete to Cure
Let the concrete cure and harden (typically 24-48 hours)
11. Remove the Concrete Forms
After allowing the concrete sidewalk to cure, remove the concrete forms.
This video will explain every step of the concrete sidewalk pouring process from start to finish.
Additionally, check out my blog article for even more information on concrete pouring: atimprovements...
Be sure to subscribe and hit the notification bell so you don't miss any future videos! I have some big plans for the font of the house that I hope will boost the curb appeal!
Follow me on Instagram: / atimprovements
Check out my Blog: Atimprovements.com
Subscribe to my RUclips Channel ⬇️ www.youtube.co...
Check out my Website for additional DIY Content: atimprovements...
▬▬▬▬▬▬▬▬▬▬▬▬▬
🎥 MY RUclips GEAR
Camera (Iphone Max): amzn.to/3d5HxSo
Microphone (Maono Condenser Mic): amzn.to/3RCAb7N
Tripod: amzn.to/3Rz5Gj3
Mini Tripod: amzn.to/3Rvt2WM
Lighting: amzn.to/3d4QdZ5
▬▬▬▬▬▬▬▬▬▬▬▬▬
🛠🧰 TOOLS THAT I USE
Carbide Tipped Drill Bit: amzn.to/3S0hdIM
Tapcon Screws: amzn.to/3OxEWxh
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Circular Saw: amzn.to/3BFotC4
Masonry Drill: amzn.to/36yP1JW
Level: amzn.to/3HowUDn
Hammer: amzn.to/35fIpiT
Chalk Line: amzn.to/3MwSDg8
Clamps: amzn.to/3HLqwpK
Drill: amzn.to/3JICKkk
Sawzall: amzn.to/3HcdeSI
Circular Saw: amzn.to/3BFotC4
Jig saw: amzn.to/3I6lcyd
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Roofing Nailer: amzn.to/3BEAuYF
Orbital Sander: amzn.to/34UwlUD
Bar Clamps: amzn.to/3JjFrJe
▬▬▬▬▬▬▬▬▬▬▬▬▬
Thank you so much for watching!
*All content on the Andrew Thron Improvements RUclips channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in the description may be affiliate links.
I have never heard the word iterative. Learn something new everyday.
Nice job Andrew, thanks for sharing your skills and letting us know with some proper planning it can be done.
You do great work keep it up. I really enjoy your videos. I'm learning myself
Appreciate it Mike 💪🏻
Fantastic! I noticed (I think) that I did not hear the word 'rent' in your actual plan. I noticed that the jack hammer was purchased and that that concrete making machine looked out-of-the-box new. I can see a whole new series starting to open up here and I am somewhat excited . Did you finish or have done a new driveway between the sidewalk installation and the final filming? I only got a glimpse but when I backed up and froze the frame it looked really spiffy unlike at the start. I really like the way you finished the walk with the joint in the middle, the edging , the grooming and that California edge treatment. Really a class act. Thanks for a great show.
Hey Patrick! And you are correct - bought TWO jackhammers and own the mixer. Definitely have a lot of possibilities for concrete now 👍. And I actually had the driveway repaved with asphalt. One of the few projects I outsourced haha thanks for the continued support!
Diesel fuel works good as a release agent.
Sprays through a regular pump up wand sprayer easily. Lower cost than WD40 too.
Fiber-Mesh micro fibers will give you better reinforcement that wire mesh…we use it in large flat work projects.
Looks great! How did you like the "Mud Mixer"? I know they aren't cheap but I have heard nothing but good things about them. I have some larger concrete projects planned in the future and I'm considering purchasing one. Labor and delivery of concrete seems to be going up everywhere and I believe it will eventually pay for itself.
Looking good Andrew! Nice improvement.
Thanks John, appreciate it! Once the landscaping and grass goes in, I hope it gets the extra boost
Great job man 👍
Thanks!!
Very nice! Thanks for the tips!
Nicely done! Looks awesome 👍🏼🤩🫡❤️
Thanks!
Nice work! cheers
I wish they made it capable of pumping the concrete as well, with a hose attachment.
Greetings.
Quick question. When using your Mudmixer, what water setting did you finalize on? The proper water setting is paramount to a good pour.
I will be renting one this spring to pour a 10 feet x 12 feet slab as the foundation of my barbeque cook house/canopy. I will be using either Quikrete 4000 or 5000 concrete mix. I need to get this pour right the first time. Therefore, any assistance with water setting would be appreciated.
From my research, most people are using a setting between 30 to 35. I will be pouring the initial mixes into a bucket and testing its consistency before I start the actual pour.
Thoughts?
The mud mixer is $3,000. Very worth it for multiple diy projects.
Where is the list of supplies you used?
Where on earth do you house all of your building tools and equipment? ha!
I am soooo tired of the lengths of the ads on RUclips. . .
Pro tip 😆 you know, just enough to be dangerous 😳
😂😬
😊👍👍👍🇹🇭
Appreciate it!
The gravel was very unnecessary and the steel wire is only good for keeping the broken concrete from separating after it breaks. Zero strength added.
Now that the concrete is clean and new spray a sealer on it. Otherwise it looks very professional.
The finish looked rough.
WAIT A MINUTE!! You removed a GORGEOUS 100 year old tree, just because you didn't want the roots to disrupt your cement sidewalk? OMG! Talk about devaluing curb appeal (*and maybe house value?)!!!! What a mistake....
The tree was dying. Limbs fell daily. The tree had to be removed regardless of the sidewalk
Lol what a joke of a mixer
Check the reviews, most give the Mud Mixerhigh praise….only quibble is the high price.