Long tube headers vs Factory manifold sound 5.3 silverado

In this video I show the difference in sound between factory exhaust manifolds and a factory cat deleted 2.5” Y pipe vs the 1 7/8” long tube headers with the 3” off-road Y pipe. The headers definitely mellowed out the sound and made it less “clappy”, also helped lower the pitch of the exhaust compared to the long tubes. In terms of power the difference between the manifolds and headers was night and day, lots more mid range power and a lot more pull above 4,500 rpm, y’all stay tuned, more to come

[@Generalpurpose702]

The cross over pipe is rusted on my Silverado, so I’m going to install headers and a new cross over pipe, thanks for the inspiration

[@_chevy_stepside]

No problem man!

[@yourfriendfarming758]

I used black duct tape to hold my light in. From 20 feet away it looks like stock trim.

[@OneShot1Da]

I like the rolling start honk! 😂. Getting JBA shorties put on my Titan. 5.6, but gonna sound sexy! #idaho, too

[@chrishansen7004]

Definitely a more defined performance sound, do you have a burble tune? It sounds alot more clappy than my 4.8

[@_chevy_stepside]

I call it a “flamethrower” tune, the tune was done by Brian at Doughty Racing Engines back in Texas and he made it do it only above 3600 rpm and only if you tap the gas it’ll shoot flames. I think he said something about late timing and lots of fuel (don’t quote me on that) but I don’t do HPTuners so I wouldn’t know. But it is tuned yes.

[@gloriamaletta8667]

This is simular to your 4.8 but has a longer stroke crankshaft so I'm assuming this will make a slightly different exhaust note alone not mention he said he has a custom tune

[@toxicspace9417]

is it 3 inch all the way no mufflers or cats?

[@qzria]

Not sure if you still have your 94 OBS but did you use the stock in-tank TBI pump for the carb with a regulator or is it a aftermarket inline pump

[@_chevy_stepside]

I still got it! It ain’t going nowhere, just too much snow on the ground to make videos with it. I used the factory tbi in tank pump, that’s what the fuel pressure regulator on the fender is for, to dial back the fuel pressure from 14 psi to about 5.5 psi

[@qzria]

@@_chevy_stepside Oh wow it looks hella clean I don’t have a OBS but I have a 89 Z28 basically the same engine fuel pump and everything just in a coupe hatchback. I love your OBS though used to drive one but it was a 91 Sierra with a 5.3. Keep up the good work 👍

[@Jj308]

Did you have to deal a Egr Valve delete for the long tube headers install?

[@_chevy_stepside]

No sir I didn’t, on the 03+ trucks there’s no egr valve

[@Alex68dash]

Its best to delete your egr either ways. Im gonna delete mine soon because it just makes your intake temps higher

[@nugslayer_2092]

all that noise and no giddy up

[@artm5583]

Way to fling loud 😂😂😂, I could justify it if it was a 9 second truck. Great video though

[@tylerclark9880]

The cats gotta be gone on both right?

[@_chevy_stepside]

Yes

[@williamescobar2521]

I want mine to sound like that what do I need??? 2:00

[@_chevy_stepside]

What I did is a catless factory Y pipe, 3” from the Y pipe back with a magnaflow magnapack and then out the back into the 4” dual angle cut tips

[@williamescobar2521]

@@_chevy_stepside bro thank you so much I’ve been looking for that idea 😮‍💨🥵

[@masonhill3858]

What’s your suspension set up on this truck?

[@_chevy_stepside]

Uhhhh I think it’s stock in the front, 3.5” in the back, has drop shackles and no overload springs, sitting on 275/45/20 Nitto 420V’s

[@romanbeytia6144]

You need a tune my boa

[@_chevy_stepside]

It’s got a hot tune by Doughty Racing Engines out of Conroe Texas

[@buhdda316]

Spends money on headers yet Tail light is held in with painters tape.

[@_chevy_stepside]

Cry about it

[@user-td8uh9yq4j]

Priorities! If you ain't first you're last