6L80-90 tcc tuning

Поделиться
HTML-код
  • Опубликовано: 9 фев 2025

Комментарии • 98

  • @Jellett01
    @Jellett01 5 лет назад +6

    Very informative video. I appreciate your ability to speak and explain things in a way that’s easily understandable.

  • @The06chill
    @The06chill 4 года назад +6

    This has been the most information I have been able to find on this topic so far. Thank you I will be using your guide to tune my 6 speed.

  • @kirkaderkderk
    @kirkaderkderk 3 года назад +4

    Thank you! I just finished updating apply/release for 1st through 4th to 318/317mph. The truck still drives just fine and I can sleep well at night knowing my torque converter isn't being abused from just driving around town. Thanks for helping me stop the madness

  • @MastersOfMask
    @MastersOfMask 4 года назад +3

    I just saw the write up that VCM has to tune a high stall converter and is pretty much the same as you in the transmission side. In my cammed camaro with a high stall torque converter and 3.91 I kind of have the same tune. The shifts are quick and smooth AF. This is a very good video for people that are begining to tuning to learn from it.

  • @idahomike00
    @idahomike00 3 года назад +1

    This guy is awesome. Very clear and informative. No B.S. with this guy. Sharing this to my Facebook and Instagram. Keep making these videos please!

  • @terrylarson2007
    @terrylarson2007 3 года назад +1

    Can’t thank you enough for this. Night and day difference!

  • @HVACRServiceTech
    @HVACRServiceTech 3 года назад

    I just finished reinstalling my 6L80 for the second time since 01/19. I'm finding your videos on the 6L80 Rebuild and all related to it very helpful. So thank you very much!

  • @daveg.5579
    @daveg.5579 5 лет назад +3

    Pattern A is Tow Haul and B is tap shift normally. Those can be changed as well( trans- shift pressures- pattern select)

    • @rdick218
      @rdick218  5 лет назад

      Thanks Dave! We can use all the help we can get!

  • @JacobAdcock-nx9ck
    @JacobAdcock-nx9ck 10 дней назад

    Thank you for the video. I have made the adjustments to stop the TC shudder. However now I have another problem that only started after this tune. When letting off the brake from a longer stop it seems as though there is not enough pressure being applied to get the car moving and feels as though it is slowly building pressure and then starts moving after approximately 0.5-1.0 seconds. Any ideas on how to fix this?

  • @baldeagle242
    @baldeagle242 6 месяцев назад +1

    Great video! I’m looking to purchase this software after bypassing my thermostat and installing a transmission cooler I’m still seeing high temps.

  • @nsgtr753
    @nsgtr753 3 года назад +1

    My stock 2015 Yukon (5.3) has 135k miles on the original TC and trans. I just bought a GM Tow Package Torque converter (dual clutch like the ZL1/CTSV TC, just with 3 bolt holes instead of 6), to replace my stock single clutch TC as preventative maintenance. My trans still shifts like butter and has zero issues. I also bought a Sonnax Zip Kit, the trans go clutch select valves and a TECHM rebuild kit to put in as well. I have HP tuners and will stop the TCC slip 1-4, should get at least another 135k miles out of the TC doing this, we will see how the rest of the trans holds up. This was all about $900 all said and done with OEM trans fluid.

    • @bruceshepard1136
      @bruceshepard1136 2 года назад

      Good information how’s the trans tcc holding up looking into a similar deal also what fluid did u go with Ty

    • @nsgtr753
      @nsgtr753 2 года назад

      @@bruceshepard1136 trans still shifting great, I use only OEM fluid, I don’t trust anything else.

  • @TechnicianRed
    @TechnicianRed 3 года назад +1

    Thanks for this video! Just HP tuned a customers 6l80 that had bad TCC shudder. Fixed it with a tune.

    • @bradbond2151
      @bradbond2151 2 года назад

      what all did you change in your tune? We have one doing the same, but only in v4 mode. Have done the tune changes as suggested in this video, but still noticing a bit of vibration. Did you do anything different? This is our first time trying hp....

    • @TechnicianRed
      @TechnicianRed 2 года назад

      @@bradbond2151 I put a video on my channel on what I did.

    • @brad8665
      @brad8665 2 года назад +1

      You put a band aid on it. The TC is shot if it’s shuddering.

    • @justinstatham6378
      @justinstatham6378 2 года назад

      @@TechnicianRed send a link to your channel

    • @TechnicianRed
      @TechnicianRed 2 года назад

      @@justinstatham6378 if you click my name it will take you to my channel. Or just search "GM 6L80 TCC shudder fix with HP Tuners"

  • @christophercarson4310
    @christophercarson4310 2 года назад +1

    @Richard Wardell can you please define what you mean by TCC Apply? If the tcc is applying, does that mean it is slipping, or not slipping? If a tcc apply percentage is say 20%, does that mean the tcc is slipping 20% or slipping 80%?

  • @garymullins6939
    @garymullins6939 5 лет назад +1

    thanks Richard this something i have curious about & thinking about getting into

    • @rdick218
      @rdick218  5 лет назад +1

      Man it's too easy for what we do with it. I wouldn't want to be without it. I realize that it $100 per vehicle but a zip kit cost more, both T-go kit are about that, the fluid is almost that, and none of those things gives YOU the power to chose when and how it shifts!

    • @garymullins6939
      @garymullins6939 5 лет назад

      Thanks Richard I am already reflashing tcm’s & ecm’s so this would be next step for me

  • @29auto30
    @29auto30 3 года назад +2

    Super helpful,doing a 09 impala now.THANKS!

    • @boosted_donkey
      @boosted_donkey 3 года назад

      Dude did it work? Mine is shuddering like a bitch

    • @29auto30
      @29auto30 3 года назад

      @@boosted_donkey Yes,turn the tcc off in 1st 2nd 3rd,leave 4th alone

    • @boosted_donkey
      @boosted_donkey 3 года назад

      @@29auto30 any reason to leave 4th alone?

    • @29auto30
      @29auto30 3 года назад

      @@boosted_donkey kind of jerky,and my fuel mileage went down.

    • @boosted_donkey
      @boosted_donkey 3 года назад

      @@29auto30 thanks bro I have them all turned off. Only thing weird is it's running a little warm but was doing that before I did it.

  • @eddiejeselink2996
    @eddiejeselink2996 Год назад

    Great job. Very well done.

  • @jdhogg18
    @jdhogg18 3 месяца назад

    What about stall on the converter? Should that be increased or leave it stock?

  • @exploringgodscountry
    @exploringgodscountry 11 месяцев назад

    Ah hell seriously? The factory locks TCC in all first four gears... that is madness! How do they keep from getting knock?

  • @snooka2484
    @snooka2484 3 года назад

    A very friendly video on some cool tuning tips. Thanks for the upload and God bless. 🍻
    Think I'll call it a night right here, nice and pleasant...before RUclips recommends "man eaten by a crocodile" or something.

  • @LoneWolfSnowplowing
    @LoneWolfSnowplowing 2 года назад

    Good video sir. Just preventatively swapped in a HD billet B&I converter in my 47,000 mile 2017 Sierra 2500hd 6.0 4x4 6L90E. I have a snow plowing business and am looking to ensure I can get as much life out of the transmission as possible. Tuning the TCM to disable TCC 1-4 was something the converter company recommended. Thank you for the info.

  • @lonniesanchez2732
    @lonniesanchez2732 3 года назад

    Thanks man seems more responsive. Its funny my tuner said there was no way to do this.

  • @PhoKingLitMedia
    @PhoKingLitMedia 6 месяцев назад

    Great video, any chance you can help me with tubing an 8l90 in a camaro with a 2800 stall converter?

  • @666Hoplite
    @666Hoplite Год назад +1

    Thoughts on what a shop would charge to do this for me? The Hp tuner and credits to do it myself adds up to $599

    • @snikwad003
      @snikwad003 Год назад

      Depends on what you want to do long term because we charge labor when they come back and ask for something else so if you want to be able to tweak it later buy your own rig and we make a few bucks on the credits too

  • @Haithamz
    @Haithamz Год назад

    I have 2011 Yukon XL 2500 ECM, it came with 6L90e , for my swap project I need 6L80 , What should I change on the ECM to use the 6L80 instead of 6L90

  • @wpafreddy
    @wpafreddy 3 года назад

    Don’t know much about tuning but i agree these transmissions tunes’ definitely are madness. i can totally feel when my lock up kicks in, in first gear. lurches me forward. Starting to think my TC is just going out.
    But maybe i should just look for someone as comfortable as you around SoCal, to tune my ‘15 1500.

  • @FLbowtieguy
    @FLbowtieguy 2 года назад

    Will this eliminate a shutter in first to second..heard this is fix for it.. trying to find out I've got 65k miles

  • @christophercarson4310
    @christophercarson4310 Год назад

    Can you please define a few terms for me? I know it may seem a bit silly or redundant, but there seems to be different meanings depending on who I talk to. Can you define what you mean when you say "Apply" and "Release"?

  • @Draega007
    @Draega007 3 года назад +1

    Will this void an extended warranty? Still have about 40k miles of warranty left.

    • @branbear24
      @branbear24 2 года назад

      most likely, depends on who's providing that coverage, you'd need to read the warranty's fine print... I would be surprised if it did Not void it.

  • @Dusty_Bottoms_
    @Dusty_Bottoms_ 9 месяцев назад

    Would you apply similar changes to the 8L90?

  • @gulraizabid3674
    @gulraizabid3674 2 года назад

    hey!! i have a sierra 14 with transmission acting weird specially in low gears ( clunking slipping it seems the vehicle does not know which gear to be in) will this tune help??

  • @richardritenour3051
    @richardritenour3051 2 года назад

    If i sent you my stock file could you look at the trans and see if you might be able to figure out why it’s slipping at cruising speeds or on a slight incline

  • @johnbonifas6040
    @johnbonifas6040 2 года назад

    Can I change the lock up on 2018

  • @mrperfect8124
    @mrperfect8124 4 года назад

    My transmission acts like it is slipping if I kick it down or roll on the gas to hard or fast and it shifts hard sometimes from first to second sometimes from second to third I MEAN HARD LIKE TO THE POINT OF ME WORRYING ABOUT IT BREAKING SOMETHING. Anyone know if a shift cylinoid, a filter needing replaced, or the torque converter would cause this???? I hope I dont have to have the whole thing rebuilt. Fluid is full and looks and smells good. Any info would be greatly appreciated.

  • @johanahmed5660
    @johanahmed5660 Год назад

    if you can do same vid about tcc on nag1 5 speed dodge gear .. thanks

  • @thomasjohnson1142
    @thomasjohnson1142 5 лет назад

    I really appreciate this I’m at the moment tuning my new rebuilt 6l80 and he did a shity job my factory trans lasted 240thou I’m having some torque slip when commanding 10 so I’m trying to get it worked out I’m doing a lot to the motor will this be ok in a higher performance application it will generate more heat being unlocked in lower gears I do have a bigger coolant system please let me know thank I just subscribed so can’t wait for more

    • @rdick218
      @rdick218  5 лет назад

      Man each case is different. You would be better off to find a good shop to do the tuning.

  • @tonyleal5579
    @tonyleal5579 4 года назад +1

    Hi Richard, how do I go about adding PID to fast learn my transmission on my 2009 Dodge Ram 1500? it doesn't give me that option

    • @rdick218
      @rdick218  4 года назад

      not sure I don't use HPT on anything other than GM. I am running an older version. I'll have to upgrade soon though........

  • @michaeljarosz8507
    @michaeljarosz8507 Год назад

    What’s the cost of this

  • @rontuinman7514
    @rontuinman7514 4 года назад

    Amazing Video, Could you help on the 8L45, Lower end shifts suck

  • @jamest.5001
    @jamest.5001 4 года назад +1

    Thanks!

  • @FerasDishli
    @FerasDishli 4 года назад +1

    Nice job 👍🏻

  • @isidrosevier1125
    @isidrosevier1125 4 года назад

    Can you do a video on what to change when you install a high stall converter with a big cam

    • @rdick218
      @rdick218  4 года назад +1

      I don't do HP work. I use the tool to make the trans function like it should if the factory cared at all if it lives. I could only assume that you would lower the shift points TPS vs VSS so it shifts in the maximum torque range instead of being tached out. I would lockout the TCC above 70% throttle.

    • @isidrosevier1125
      @isidrosevier1125 4 года назад

      @@rdick218 awesome thank you

  • @flux_core_fx
    @flux_core_fx Год назад

    Super helpful, thank you!

  • @Gkcmg11
    @Gkcmg11 3 года назад

    Thank you very much sir.

  • @peterscott4597
    @peterscott4597 4 года назад +1

    Good stuff thank you. Stop the madness and get that torque converter clutch under control; I am in full agreement. These steps can also be applied in SCT Advantage 3 for a Ford transaxle/transmission who's clutch is driving you crazy with aggressive clutching in low gears. This video has been very helpful. God Bless.

    • @rdick218
      @rdick218  4 года назад

      Thanks. is sct advantage 3 like HPT and you have to purchase credits for each tune?

  • @nate274
    @nate274 Год назад

    So this causes torque converter slip in 1-4 like an older vehicle and more fuel consumption and heat from slip in stop and go traffic. There has got to be an in between .

    • @snikwad003
      @snikwad003 Год назад

      Cooler upgrade, is the fuel saved worth the price of short trans life? A 6L is almost $5k around here

  • @J-remyM
    @J-remyM 3 месяца назад

    How do you save the stock settings?

    • @jdhogg18
      @jdhogg18 3 месяца назад +1

      When you get hpt set up and plugged in, read the vehicle. Only need to save the ECM and TCM. A third file that pops up is not needed. Save as, "Stock."

  • @edwinlora5520
    @edwinlora5520 Год назад

    Hello anyone in the new york, NJ Ct area doing this? I have a 2019 suburban with shudder 😢

  • @pjbandal
    @pjbandal 4 года назад +1

    Helpful thank you

  • @michaelmagyar5734
    @michaelmagyar5734 4 года назад

    Richard Wardell: Do you (or would you) install transmission tunes onto GM vehicles professionally to users like me (and probably many others in the GM-Trucks forum) who has no interest in going beyond the changes made in this video?

    • @rdick218
      @rdick218  4 года назад

      I suppose I could for those in my area. We do it for overhaul customers. Out of town folks need to find a tuner near them.

  • @moose1992caprice
    @moose1992caprice Год назад

    Will this method generate more heat ? Worried about overheating the converter

    • @4mudski
      @4mudski 4 месяца назад +1

      Just the opposite, tuning will give you cooler temps!!

    • @moose1992caprice
      @moose1992caprice 4 месяца назад +1

      @@4mudski I've been using this tuning for a while now. I've been happy with it so far.

    • @4mudski
      @4mudski 4 месяца назад

      @@moose1992caprice getting mine done next Friday! $500 bucks. What did you pay?

  • @SuperCarSweden
    @SuperCarSweden 4 года назад

    رائع، رائع جداً
    شكراً، شكراً ، شكراً

    • @rdick218
      @rdick218  4 года назад +1

      You're welcome. Thanks for watching.

    • @TTURKI
      @TTURKI 3 года назад

      @@SuperCarSweden ضرب قيرك؟

  • @classicdaily_guy6744
    @classicdaily_guy6744 5 лет назад

    Very helpful video

  • @DanMcD80
    @DanMcD80 4 года назад

    Do you have one of these vids for a 4L80E? Im new to hpt

    • @rdick218
      @rdick218  4 года назад

      They work in the same way. Only real difference is that with the 4l80 there's no desired slippage.

    • @marekkrepa9982
      @marekkrepa9982 11 месяцев назад

      ​@rdick218 hi. 2017 sierra with 6l80. My mechanic changed torque converter to billet one and said no programing needed. Is he right or should I go to different shop?

  • @codyfastenau2814
    @codyfastenau2814 3 года назад

    Can you make me a Tcc tune and email it to me if you did could I buy like a cts edge and program it

  • @monkeywrenchization
    @monkeywrenchization 4 года назад

    I have HP Tuners MPVI2, and I found an item called Mountain Mode. It is in the Tap up/ Tap Down menu. What does it do, and is it available on my 6L80 in my 2014 GMC Sierra 4 X 4. PCM of North Carolina did a tune for me, engine & transmission, I requested that they do this for me, but it wasn't done. I'm not bad mouthing PCM of North Carolina, the email tune they did works fine. This Mountain Mode shows that it is disabled, can I enable it myself. Just wondering if you have ever tried this.

    • @rdick218
      @rdick218  4 года назад

      I haven't heard of it....

    • @bobbobby1846
      @bobbobby1846 Год назад

      I believe you hold your shifter button for 10+ seconds to enable and disable the mountain mode.

  • @68turbopowered
    @68turbopowered 4 года назад

    Why would you/anyone want the lock up clutch slipping? What am I NOT understanding???????

    • @rdick218
      @rdick218  4 года назад

      Makes the powertrain feel smoother........

  • @chehystpewpur4754
    @chehystpewpur4754 4 года назад

    noo why do i want to disable the tcc apply in all the gears? i want this trans over 4l80e for the extra gears and the ability to lock the converter in all gears?

  • @jeremymardlin5381
    @jeremymardlin5381 3 года назад

    I would have kept the lockup in 4th gear. As far as what you said about 5th gear lockup at 31mph, it won't really ever be in 5th at that speed unless you have a low gear rear end. I think the lowest factory one in a 16 1500 model was a 3.73. It likely would only see 5th gear when slowing down. I don't think my truck ever even shifts to 5th until around 40.

    • @bluephoenix383
      @bluephoenix383 2 года назад

      It's 3.08 which is crazy for a 6sp. My 16 silverado has the 3.42 and that still seems to low