Hi Michal, front no cutting, for the rear there are two ways, 1. is reach from the bottom sides of the bumper to push the vent out. Or 2. Removing it. Either or, but i chose to remove it.
So I loosened up the rear bumper the way you did it on the video, but when it came to loosing up the rear garnish with the pry tool it wasn't working for me, any easier way to get it out
If this is the first time removing the garnish, it will be really stiff , if u look at the tabs there is a locking lil tabs on them push out with force while prying the tabs.
I understand, but removing it for me was not that bad, just reserve your time and enjoy the mod. Be careful pulling it from the back those tabs are strong 😄
Hi mark! Ty! www.ebay.com/itm/203478931711 scroll down u will see different colors. Or if you are in the states you can call your local honda dealer and inquire for the 2020 civic front and rear vent garnish. But ebay or online might be cheaper. Best of luck and thanks-
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
In the UK those bumper garnishes are over £2000 for the OEM Honda ones, complete and utter madness.
😲
I'm definitely doing this when I put my new bumper on. These bumpers are mad so cheap.
what bumper are putting on? The type r conversion or something else?
@@CoolGuynumbawan just oem. I messed my bumper up
@@BboyMobster My b I phrased that like an idiot, what bumper are you gonna go with since your oem one broke
@@CoolGuynumbawan another oem
@@BboyMobster from where? cause the ones i’ve found are expensive asf
Never anyone with parking sensors doing this 😂
did they block your sensors in the front? i just installed the front ones and today my lkas etc came om
I'm here cos I was searching on how to take of my 2020 vents and install the old ones 🤣- I just like them more, the new vents are too busy
I will take the 2020 off your hands :)
what about the sensors ?
What size screw goes on the rear garnish
looks amazing 👏 so front doesn't need modifications right? just the rear needs cutting and bumper removal?
Hi Michal, front no cutting, for the rear there are two ways, 1. is reach from the bottom sides of the bumper to push the vent out. Or 2. Removing it. Either or, but i chose to remove it.
So I loosened up the rear bumper the way you did it on the video, but when it came to loosing up the rear garnish with the pry tool it wasn't working for me, any easier way to get it out
If this is the first time removing the garnish, it will be really stiff , if u look at the tabs there is a locking lil tabs on them push out with force while prying the tabs.
@@car-lo gotcha thank you 🙏
No prob brotha! Hope your ride
Looking fresh!
You get it from the dealer or you get aftetmarket made ones??
They are all oem from the dealer with the Honda box.
I feel like you can just pull off the rear cover like the front...do you have to loosen the bumper?
U can try to reach down below the bumper but there are other ways to remove it, just take your time .
@@car-lo ok thanks, i just rather not taking the rear bumper off im afraid i might bream something lol.
I understand, but removing it for me was not that bad, just reserve your time and enjoy the mod. Be careful pulling it from the back those tabs are strong 😄
Where did u get the parts ? Need to swap my 2019 vents asap
Hi CivicSiChick, it was a dealer part sorry I was not able to provide the part#, but '20 vent from the dealer specific to your color.
Part number?
Sorry bro i threw the box and never took a note.
Hi car-lo can you send me a link of website that i can order like that please I subscribe you already :)
Hi mark! Ty!
www.ebay.com/itm/203478931711
scroll down u will see different colors.
Or if you are in the states you can call your local honda dealer and inquire for the 2020 civic front and rear vent garnish. But ebay or online might be cheaper. Best of luck and thanks-
Paintjob is sicknasty onbthis car 🤢