It amazes me when people say….its just a sticker…I am not made of money. The stickers do not make themselves. There are also a lot of other costs involved including electricity, machinery,wear and tear etc.
Hello! You're totally right, we have lost a few customers after adjusting our prices but I think that's necessary. Thanks for supporting our channel :)
I really would like to thank you for all you share here! I've been doing vinyl as a side hustle for a while, but your videos have helped me take it to another level!!
Hello I have a question. I have 1/2mtr x 3mtr vinyl which I have cut shapes for campervan decals. How do you ship these without the backing separating from the transfer sheet. I was thinking se ding the whole sheet out or would it be best to trim them all down b4 to individually
Hey guys! Great video as always. For the decals, do you get supplied with the artwork by the customer, or do you create the artwork for your customer? If you are supplied with artwork, do the colors already come separated? Thank you!
Sometimes they provide the artwork in pdf format but rarely. Most of the time we provide the art work and depending how big the project will be we consider charging set up fee or not
is it wise to get a protection plan for machines? Also . I want to do car decals stickers so I might get the maker 3 bundle, I want to sell car stickers so I hope I'm making the right choice with the maker 3 and water proof stickers,. Hopefully it will last on the car... any added advice would be awesome. Basically I just want to get the right machine and stickers for cars (something durable since im selling them. . If there are better machines or stickers for car decal and sticker materials, please let me know... thanks you for your videos..
Hey there!! Wondering if you could do the same job on cameo 4? I wonder how to do bigger than 12inch one-piece logo or designs with cameo4? thanks in advance!
Hello! We wouldn't try it with something with these many colors unless it was the right size for our Cameo 4. We have done bigger decals than our Graphtec CE6000-60 and we used alignments, I will leave a link to the video. Thanks for watching! ruclips.net/video/kHw5DdRbozk/видео.htmlsi=3W2VRLqhxZeG9Q36&t=1
We have used the AT-65 and AT-75 when layering stickers up to 5 colors but transfer depends on surface if we are doing it on glass we would use a less tack transfer but if it’s on a car or car magnet we would use a high tack, great question 😎
All magnets can fly off if not installed properly most of the time it’s customers fault so we give them instructions when and how to place them, don’t do it when raining, always remove them once a week and clean either DRY rug or towel and only on flat surfaces no edges or bumps because air goes in and that is how they fall off when driving also don’t make them too big
Hello! This is the very first time we hear about this software but I would assume it could be done, as long as it uses vector images. Sorry we don’t have an answer.
Hello! Unfortunately we have no experience with digital printers, we have been looking at Versacamm vs-300i and HP latex printer but haven’t really decided which to get, I guess we haven’t done much research due to the fact that we aren’t ready to get yet. Thanks for watching!
Hello! We didn’t create the logo, our customer had his own design. However we could have shown how to get it ready in the software, we will keep that in mind for a similar project, this is an older video. Thanks for watching!
Great informational videos I am excited about venturing into the sign business, I bring a background in graphic design but lack hands-on experience with the actual production and commercial printing aspects. I'm keen on gaining real-life insights. Would you be open to mentoring me in person? I'm willing to work and learn, and I'm not seeking any compensation for your guidance. I appreciate your consideration. Thank you!
OUR AFFILLIATE LINKS:
RTAPE TRANSFER: amzn.to/3QXg7PR
APPLICATION ROLLERS:amzn.to/3L0vtPX
ORACAL 651 VINYL: amzn.to/45CuP34
GRAPHTEC VINYL CUTTER CE7000-60: amzn.to/3subOBE
CAMEO 4: amzn.to/45JvZdc
CAMEO PRO 24 INCH: amzn.to/3OVTp8t
USCUTTER TITAN:amzn.to/3RqaQAK
CORELDRAW SOFTWARE: amzn.to/3EgwP5e
RAPID TAC:amzn.to/44x4x18
REPOSITION MAGNETS:amzn.to/3qMJ3zu
CUTTING KNIFE:amzn.to/3QX0LuN
SQUEEGEE: amzn.to/3QVadie
Thank you for not under pricing your work.
Love you guys !
Thank you for your support 🙏
It amazes me when people say….its just a sticker…I am not made of money. The stickers do not make themselves. There are also a lot of other costs involved including electricity, machinery,wear and tear etc.
Hello! You're totally right, we have lost a few customers after adjusting our prices but I think that's necessary. Thanks for supporting our channel :)
I really would like to thank you for all you share here! I've been doing vinyl as a side hustle for a while, but your videos have helped me take it to another level!!
We are glad our videos can help you we appreciate your support 🙏
So much good information in one video! Thanks for taking the time to film, narrate, edit and share your experience!
Thank you we also appreciate your support as well 😊
Perfect layering. Nice content always. One love guys..
Thank you so much for taking the time and for your efforts.. I appreciate you sharing this with us ... Thank you.
You’re welcome :)
Such steady hands
🎉amazing 👏🏿
Always so helpful wonderful guidance .
Thank you 🙏
Hello I have a question. I have 1/2mtr x 3mtr vinyl which I have cut shapes for campervan decals. How do you ship these without the backing separating from the transfer sheet. I was thinking se ding the whole sheet out or would it be best to trim them all down b4 to individually
Hey guys! Great video as always. For the decals, do you get supplied with the artwork by the customer, or do you create the artwork for your customer? If you are supplied with artwork, do the colors already come separated? Thank you!
Sometimes they provide the artwork in pdf format but rarely. Most of the time we provide the art work and depending how big the project will be we consider charging set up fee or not
Great video!
Thank you 🙏
is it wise to get a protection plan for machines? Also . I want to do car decals stickers so I might get the maker 3 bundle, I want to sell car stickers so I hope I'm making the right choice with the maker 3 and water proof stickers,. Hopefully it will last on the car... any added advice would be awesome. Basically I just want to get the right machine and stickers for cars (something durable since im selling them. . If there are better machines or stickers for car decal and sticker materials, please let me know... thanks you for your videos..
Great channel...good info....how big is that decal? You must have cut it on a 24 inch cutter... Cricut won't cut that in one piece.
Can’t remember the size exactly those are old projects but we have a cameo 4 video in which we have done door signs and car decals with 12 inch cutter
Super bien expliqué👌🏽💯
Great info ❤
Thank you for your support 🙏
@@RDIdecals thanks for the info. Just got my Cameo and haven’t unpacked it yet so looking for various ways to use it. 🥰
Hey there!! Wondering if you could do the same job on cameo 4? I wonder how to do bigger than 12inch one-piece logo or designs with cameo4? thanks in advance!
Hello! We wouldn't try it with something with these many colors unless it was the right size for our Cameo 4. We have done bigger decals than our Graphtec CE6000-60 and we used alignments, I will leave a link to the video. Thanks for watching! ruclips.net/video/kHw5DdRbozk/видео.htmlsi=3W2VRLqhxZeG9Q36&t=1
ESO CHICO 💪🏽💯💯💯
On the 6 color decal can you clarify if you were using RT-75 transfer tape or a less tack tape for the additional colors?
We have used the AT-65 and AT-75 when layering stickers up to 5 colors but transfer depends on surface if we are doing it on glass we would use a less tack transfer but if it’s on a car or car magnet we would use a high tack, great question 😎
Soo it takes 2 hours for only 1 sticker or did you make make more stickers?
Hi RDI Where to get magnets that wont fly off on highway driving?
All magnets can fly off if not installed properly most of the time it’s customers fault so we give them instructions when and how to place them, don’t do it when raining, always remove them once a week and clean either DRY rug or towel and only on flat surfaces no edges or bumps because air goes in and that is how they fall off when driving also don’t make them too big
Hi, where can I find your calculation app ? Thanks
You can use our calculators by joining our gold membership just click on JOIN button on any of our videos
Can this be done on film vinyl design?
Hello! This is the very first time we hear about this software but I would assume it could be done, as long as it uses vector images. Sorry we don’t have an answer.
What printer do you suggest? I have plotters but I want to upgrade to a printer
Hello! Unfortunately we have no experience with digital printers, we have been looking at Versacamm vs-300i and HP latex printer but haven’t really decided which to get, I guess we haven’t done much research due to the fact that we aren’t ready to get yet. Thanks for watching!
@@RDIdecals understandable thanks for the reply! Love your videos! Keep up the work
Does Oracle have a printable vinyl?
I’m not really sure I think they do hopefully we can share that info soon 😉
Hi why you didn’t explain how you do that???
Hello! We didn’t create the logo, our customer had his own design. However we could have shown how to get it ready in the software, we will keep that in mind for a similar project, this is an older video. Thanks for watching!
Which machine did you use to cut that. Looks bigger than 12 inches
Yes they were cut with our Graphtec cant remember the dimensions but the point was making multicolor sticker with vinyl cutters
Thanks
Great informational videos I am excited about venturing into the sign business, I bring a background in graphic design but lack hands-on experience with the actual production and commercial printing aspects. I'm keen on gaining real-life insights.
Would you be open to mentoring me in person? I'm willing to work and learn, and I'm not seeking any compensation for your guidance. I appreciate your consideration. Thank you!
super
Thank you 🙏
What is the software?
Coreldraw x6
That looks like masking tape not duct tape
Yes I mean to say that thanks for the correction
@@RDIdecals thank you for the informative videos