Hey Colt, I just want to let you know that your channel is my favorite youtube content. I love Matt, Rory, Paul, Rudy and Robby's channels but, I really appreciate the detail and time that you attack every project with. Also, you don't have a crew to help you sling the camera and do the work. Keep up the GREAT effort! Thanks for what you do!!!
@@frankburkett7453 You are so right! It was not intentional. Tom Tom also does great detail on his builds and works alone on his recording. Thanks for reminding me!!
Dude I love the Bible verses at the end I always knew you were a Cristian by your work ethic and quality just as your verse today states your not working to impress any body, but to do the best one can do for the glory of God
Hey Colt! Always enjoy and learn from all your video's. Said it before and will keep saying it........super stoked you have your own channel now. Always happy when that bell lights up that another cool video is waiting to be watched. Looking forward to the next and hope we have not lost seeing your wife and son now that fall is coming around. Take care and thank you for sharing
I love how you go outside the box and obviously it worked so awesome with the S10 build that the Pacer is gonna blow people's minds. Can't wait for the finally product.
Boy howdy them guys at Barnes have been putting in the skull sweat. That's a whole damn lot of strength and you made it out of puzzle pieces! Lots to be proud of on that part!
We could all make that stuff with an engineering degree and a plasma table. Better yet, a water jet so we could cut kids toys with plastic too….. honestly I’m just bitter and jealous that I have no welder, tools, or ability. I’d love to be a fab guy not just a fat guy
Colt, In case you don't know, something happened in the middle of the video where RUclips said it was 4k but the picture was terrible. Not sure what happened but it threw me for a minute and after I kept watching it done fixed itself. I like the way you explain stuff. Keep them videos comin'. I'll keep on watchin. As a kid I loved "The Fall Guy" I don't remember much of it now but its cool that you were named after Colt Seavers.
Hey Colt, Love your videos and you are one of the only guys out there that show us the tips & tricks of putting together these rigs. I love how you explain the processes of doing this stuff. Your videos are great and keep them coming. Thanks - later
If you take your torch and get it burning black you can use it to put soot on those threads and the BBs wont stick to the soot. It's an old pipe welder trick
Pipe welders up here in north dakota use their cutting torch to smoke the possible affected area. When they do that, the smoke causes those boogers to either bounce off or the boogers easily come off with a wire brush. Worked every time that I saw them do it.
I used that thread chasing method to fix some lug studs that got cross threaded on my Land Rover. Great tip. If you are anything like Fab Rats, your missing parts are in the fireplace.
Man Colt, I wish I lived closer to ya. As a welder/fabricator and a bit if a machinest id come by and give ya a hand. Looks like ya could use one to make it go a little faster and ya wouldn't have to work quite so hard. Awesome work brother keep it up.
The DIY thread chase tip is a great one I've showed numerous people over my years. I was thinking you should have had something in there while you were welding, but it turned into a great teaching moment. "Happy accidents."
Probably should have named your channel 'Colt Builds It Really Well' lol It's been said that we should try to learn something new each day. So I do that by watching your channel.
Hey Colt, this is a great video. I remember some of the things that I learned in Heavy Equipment And Diesel Mechanics Class, way back in the mid 80’s. The O.S.H.A. in me noticed your creeper on the floor behind you. I would hate to see you accidentally step on that and go for a ride. Although it might make a good blooper. lol Stay safe and thank you for sharing.
Colt... I really appreciate your clear explanations of why you are doing something. Is your background in Metallurgy? Do you have an Engineering Degree?. You are very knowledgeable in all you do. Keep up the good work.
A great video Colt, I haven't seen this depth of axle building since the 80's ,dam thats 40 yrs, boy i gettin up there , with your attention to detail and explanation of each part your doing makes you as good as any instructor I've dealt with and the best part is you make it easy to understand for anyone, I am guessing this is how your dad taught you to do it the way he did it, nice quality work, those welding boogers will payoff when you and Rory win the ONX challenge , i know the feeling working in the heavy steel industry ,look forward to all future videos, nice quote ending 👍
Hey Colt. Next time you have a brake line farel stuck to the fitting, heat it up a little bit and melt a crayon on it. The crayon will pull into the nut and get between the farel and nut. Hope this trick helps. Works with a lot of stuck metal objects..
# Busted Knuckle Films . Colt thank you for showing how to build stuff on a budget, alot of RUclipsrs just show all the parts from sponsors that was given to them.
My son said that's parosity in your Wells if you dont clean it the certified pipe welder sead and Your first pass should be high heat for good penetration and strength and then your cap should be your good looking weld That keeps impurities out of your first Strength pass weld fyi Don't shoot the Messenger you can walk better than me😂
Great video. Over an hour and you didn't loose me. Good job. Steel toed sneakers? Safety glasses half the time. Eyelid welding shield. Just for the tacks. Well your eyelids are like a 0.5 shade. You only need to see for another 3 or 4 decades. I mean what the hayyyy. Love you man. Oh dump a yard or two of gravel infront of that garage door. Your forktruck asked me to tell you that. How bout a chunk of brass on the bottom? Leave some gold on the rocks. Leave your mark.....
Hi Colt, you definitely need a mbx from rodcraft or Chicago Pneumatics, this tool is like a sandblasting tool but it’s a rotating nail blaster better than any flex wheel or so something. It’s cleans rust in seconds on the most surfaces, absolutely helpful tool. I use it very often for my projects…
I love watching your videos and i live about an hour and a half from you. I live in cortez Colorado lol one of these days i want to come meet you #dirtheadshed
Hey colt. Just an idea for the 9" breather. I installed a fill cap off the back of my 9" and then tapped the cap for the breather instead of finding a new place in the housing. Also, I welded a piece of 1/4" plate on the bottom of the axle, so you don't smash the stamped steel housing. And then I tapped that for a 1/4" NPT plug to make draining it easier.
You were rolling the axle into the shop with the wheels and pinion spinning.. your drum was never rusted to the shoes it was rusted to the axle from the beginning, but thanks for all the cool videos I do enjoy all your educational stuff as a fellow wheeler
I appreciate you and I do learn a lot from you and watch your videos from head to toe but man I found a tube belt sand cleaner thing off of Amazon . It wasn't that expensive and to clean tubes it worked so good
Colt and other viewers I didn't find out til I was 24 that a t bone was 1 part newyork strip and I part filet which I was amazed and shocked that I didn't know lol so if anyone else didn't know now you do lol
Thank you Colt for sharing this with me ! I've never welded before but I believe that I've learned some good tips from you ! Keep up the great work and lessons !
To remove rusted-on drums use a BFH or air hammer to beat the face of the drum between and around the wheel studs. This fractures the rust on the large flat surfaces between the axle face and drum, which is usually what's stuck. I've done this many times on Unimog 404s and have never damaged a (very expensive) drum.
Rub some anti-spatter gel in the bung before welding...I hate trying to clean spatter out of threaded areas when I get in a hurry and weld stuff up! 👍🏻
You aren’t joking about the amount of grinding on the 05 and up stupiduty axle! Tons of grinding! I don’t have a plasma cutter so it was only a saws all and cutoff wheel on the driver side.
One thing you could do to get the brake drums off is to use a hole saw and make holes in the backing plates then use the air hammer through the holes to the inside of the drums.
Yeah, on those break drums when I worked on semi. Trucks, mainly semi trailers. You just take a really heavy hammer Always keep a 12 pound sledge, but A8 pound sledge. Hammer with the right handle, you can smack let drum and they'll split in 2 pieces LOL I would definitely recommend strapping. The axle to the Jack stands. Or maybe even taking them off the jackstands, ha ha ha. It works and it's less work I think 😄
sweet build can't wait to see final product. but most importantly very educational and keeping us normal backyard project hobbies in mind. would have to say its @BustedKnuckleVideo
That plasma cutter did impress me. I bought one that that said it could do 1/2 and couldn’t do 1/4. So I went and bought one that could do 1 1/4 and does 1/2 with no problem now. lol. I have never tried anything over 5/8 with it.
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
Hey Colt, I just want to let you know that your channel is my favorite youtube content. I love Matt, Rory, Paul, Rudy and Robby's channels but, I really appreciate the detail and time that you attack every project with. Also, you don't have a crew to help you sling the camera and do the work. Keep up the GREAT effort! Thanks for what you do!!!
Wow, thanks!
Don’t forget Tom Tom
@@frankburkett7453 You are so right! It was not intentional. Tom Tom also does great detail on his builds and works alone on his recording. Thanks for reminding me!!
Colt has some of the best tips and advice on 4x4 vehicle hacks, builds and places to use them.❤🎉
Thanks
Agreed, good mix of explanation and work
Indeed, Colt is a great mentor!
Dude I love the Bible verses at the end I always knew you were a Cristian by your work ethic and quality just as your verse today states your not working to impress any body, but to do the best one can do for the glory of God
Agreed!
Came here to say that too! Love your stuff @Colt
I wait patiently for your videos. I'm not very good at it!🤣🤣
Those Modified trailing arms are money and every shop needs a fork lift! Well done Sir!!
This is some of your BEST work yet!😉 👍
Your knowledge and the ability to share it are very rare online.
Glad you think so!
Hey Colt! Always enjoy and learn from all your video's. Said it before and will keep saying it........super stoked you have your own channel now. Always happy when that bell lights up that another cool video is waiting to be watched. Looking forward to the next and hope we have not lost seeing your wife and son now that fall is coming around. Take care and thank you for sharing
Killing it with the fab skills! Love watching u build.
Thank you
I love how you go outside the box and obviously it worked so awesome with the S10 build that the Pacer is gonna blow people's minds. Can't wait for the finally product.
Boy howdy them guys at Barnes have been putting in the skull sweat. That's a whole damn lot of strength and you made it out of puzzle pieces! Lots to be proud of on that part!
We could all make that stuff with an engineering degree and a plasma table. Better yet, a water jet so we could cut kids toys with plastic too….. honestly I’m just bitter and jealous that I have no welder, tools, or ability. I’d love to be a fab guy not just a fat guy
Colt, In case you don't know, something happened in the middle of the video where RUclips said it was 4k but the picture was terrible. Not sure what happened but it threw me for a minute and after I kept watching it done fixed itself.
I like the way you explain stuff. Keep them videos comin'. I'll keep on watchin.
As a kid I loved "The Fall Guy" I don't remember much of it now but its cool that you were named after Colt Seavers.
Them ford lockouts are way better than alot of aftermarket
Hey Colt, Love your videos and you are one of the only guys out there that show us the tips & tricks of putting together these rigs. I love how you explain the processes of doing this stuff. Your videos are great and keep them coming. Thanks - later
Thanks! Will do!
If you take your torch and get it burning black you can use it to put soot on those threads and the BBs wont stick to the soot. It's an old pipe welder trick
Pipe welders up here in north dakota use their cutting torch to smoke the possible affected area. When they do that, the smoke causes those boogers to either bounce off or the boogers easily come off with a wire brush. Worked every time that I saw them do it.
Thanks for all the welding and cutting tips during the build. Your dialog during the video is helpful.
Thanks, keep up the good work.
I used that thread chasing method to fix some lug studs that got cross threaded on my Land Rover. Great tip. If you are anything like Fab Rats, your missing parts are in the fireplace.
Man Colt, I wish I lived closer to ya. As a welder/fabricator and a bit if a machinest id come by and give ya a hand. Looks like ya could use one to make it go a little faster and ya wouldn't have to work quite so hard. Awesome work brother keep it up.
Colt with the ASMR sweeping. Keep up the great work.
Busted knuckle films,
Loving,learning,laughing with you and your channel. Thanks for your time and effort
Busted Knuckle Garage, Colt I'm loving your channel, Keep up the great work and God Bless you and your family brother. ✌️ 😊👍🙏🏼
The DIY thread chase tip is a great one I've showed numerous people over my years. I was thinking you should have had something in there while you were welding, but it turned into a great teaching moment. "Happy accidents."
Probably should have named your channel 'Colt Builds It Really Well' lol It's been said that we should try to learn something new each day. So I do that by watching your channel.
Wow, thanks
@@coltbuildsitBTW your hint didn’t leave much to chance with Busted Knuckle Offroad
Hey Colt, this is a great video. I remember some of the things that I learned in Heavy Equipment And Diesel Mechanics Class, way back in the mid 80’s. The O.S.H.A. in me noticed your creeper on the floor behind you. I would hate to see you accidentally step on that and go for a ride. Although it might make a good blooper. lol
Stay safe and thank you for sharing.
Colt... I really appreciate your clear explanations of why you are doing something.
Is your background in Metallurgy? Do you have an Engineering Degree?.
You are very knowledgeable in all you do.
Keep up the good work.
Your content has always been top-shelf, and it keeps getting better. That Colossians 3 verse is a great moto for life, you seem to live it well.
This is 1of my favorite channels. Colt builds awesome rigs and is doing what he can for us to save $ on our builds. Thank you Colt.
I’ve been waiting for a video on the racer pacer! Was happy to see that you posted one love watching your videos keep up the great work!
@bustedknucklevideo !!! Great video colt! Can’t wait to see this one eating rocks!
Surface preparation is number 1 in welding
Love that big red jack. Just like mine. It has been in the family since the 1950s
“A BIG GUY IN A TINY FORKLIFT”. “Tommy Boy”. 😂😂😂😂
I’ve seen a lot of things but the work on that 44 was awesome!
another interesting video colt, as always thank you for sharring and i loved it!❤❤😃😃
Glad you enjoyed it!
Love your channel Colt. Gary from Oregon
Man you pay so much attention to detail you got this again
This is a very detailed and educational auto build video.
the toad should be named Jack and be your mascot!
great video all around.
If I had found him in some leaves would we name him Russell?😁
Colt, this was GREAT 👍, looking forward to seeing what's next. Just enjoying the whole build process.
😎👍
This is going to be awesome
Glad you are back on it😎👍
Intense, articulate, excellent!
Thank you kindly!
Glad to see you are back up and building, 😊😊
You do such a fantastic job with whatever you do.
Cool stuff Colt!!
A great video Colt, I haven't seen this depth of axle building since the 80's ,dam thats 40 yrs, boy i gettin up there , with your attention to detail and explanation of each part your doing makes you as good as any instructor I've dealt with and the best part is you make it easy to understand for anyone, I am guessing this is how your dad taught you to do it the way he did it, nice quality work, those welding boogers will payoff when you and Rory win the ONX challenge , i know the feeling working in the heavy steel industry ,look forward to all future videos, nice quote ending 👍
Nice work Colt.. great videos
Glad you made it back from Bending the Super Duty, up in the appropriately named Bend Oregon. love the work. your the king of junkyard axles Colt.
Much appreciated
Hi guys doing great things love seeing your shows
@BustedKnuckleOffRoad
Always enjoying your videos so make more lol
Love this channel. Lots of tips and tricks for the hobbies. Thanks for sharing
Can't wait to watch the on x games. Without a doubt 1st All Day. I seen the other build's.
Colt sitting in that fork lift is like Chris Farley in David Spades suit coat.
I love the total realness of your channel.
Thank You for being you.
You are so welcome
Busted Knuckle Garage, They do some Awesome stuff. Colt i really enjoy your channel i have learned a bunch of things.
love the trailing arms!
Hey Colt. Next time you have a brake line farel stuck to the fitting, heat it up a little bit and melt a crayon on it. The crayon will pull into the nut and get between the farel and nut. Hope this trick helps. Works with a lot of stuck metal objects..
# Busted Knuckle Films . Colt thank you for showing how to build stuff on a budget, alot of RUclipsrs just show all the parts from sponsors that was given to them.
My son said that's parosity in your Wells if you dont clean it the certified pipe welder sead and Your first pass should be high heat for good penetration and strength and then your cap should be your good looking weld That keeps impurities out of your first Strength pass weld fyi Don't shoot the Messenger you can walk better than me😂
Great video. Over an hour and you didn't loose me. Good job. Steel toed sneakers? Safety glasses half the time. Eyelid welding shield. Just for the tacks. Well your eyelids are like a 0.5 shade. You only need to see for another 3 or 4 decades. I mean what the hayyyy. Love you man. Oh dump a yard or two of gravel infront of that garage door. Your forktruck asked me to tell you that. How bout a chunk of brass on the bottom? Leave some gold on the rocks. Leave your mark.....
Excellent job Colt!!!
Victor wrench always works
Hi Colt, you definitely need a mbx from rodcraft or Chicago Pneumatics, this tool is like a sandblasting tool but it’s a rotating nail blaster better than any flex wheel or so something. It’s cleans rust in seconds on the most surfaces, absolutely helpful tool. I use it very often for my projects…
I love watching your videos and i live about an hour and a half from you. I live in cortez Colorado lol one of these days i want to come meet you
#dirtheadshed
Four Corners 4x4 week starts on Labor Day!
@coltbuildsit I wish I could make it but won't be able to. I tried to figure out a way to get the time to i just wasn't able to get the time
Nice work dude, Been thinking about shaving my kingpin 60 before it goes in the jeep.
Nice work, Colt, that's gonna get you through the rough patches. 👍😀😀
Hey colt. Just an idea for the 9" breather. I installed a fill cap off the back of my 9" and then tapped the cap for the breather instead of finding a new place in the housing. Also, I welded a piece of 1/4" plate on the bottom of the axle, so you don't smash the stamped steel housing. And then I tapped that for a 1/4" NPT plug to make draining it easier.
I guess I should've watched the rest of the video before I commented on the lower plating hahaha
Say stout one more time to make it 25. Love your channel.
Challenge accepted...Stout
I was taught to never chase threads dry! I like Tap Magic, really helps cleaning out the threads.
Great video Colt!!!! ................. But pb blaster would have helped alot................trust me Im an old guy......lol.......
Colt needs to invest in a bead blasting set up; or one of these new fangle, high-pressure dry ice blasters those things are phenomenal
You were rolling the axle into the shop with the wheels and pinion spinning.. your drum was never rusted to the shoes it was rusted to the axle from the beginning, but thanks for all the cool videos I do enjoy all your educational stuff as a fellow wheeler
That funnel tree is slick!!
I appreciate you and I do learn a lot from you and watch your videos from head to toe but man I found a tube belt sand cleaner thing off of Amazon . It wasn't that expensive and to clean tubes it worked so good
Colt and other viewers I didn't find out til I was 24 that a t bone was 1 part newyork strip and I part filet which I was amazed and shocked that I didn't know lol so if anyone else didn't know now you do lol
Thank you Colt for sharing this with me ! I've never welded before but I believe that I've learned some good tips from you ! Keep up the great work and lessons !
Glad to help
FYI. Harbor Freight sells thin walled impact sockets. I use them and they work fantastic.
To remove rusted-on drums use a BFH or air hammer to beat the face of the drum between and around the wheel studs. This fractures the rust on the large flat surfaces between the axle face and drum, which is usually what's stuck. I've done this many times on Unimog 404s and have never damaged a (very expensive) drum.
Damn, now that’s informative. Thanks 😊
That fishing net looks a whole lot more like bailing twine. Which would make a whole lot of sense for an old farm truck axle
God Bless you brother! Good work!
Thanks, you too!
Always enjoy your content.
I appreciate that!
Rub some anti-spatter gel in the bung before welding...I hate trying to clean spatter out of threaded areas when I get in a hurry and weld stuff up! 👍🏻
I really like the progress colt. I am looking forward to your next video
Thanks 👍
Colt, look on the end of the pinion gear shaft, yoke end, and it will give you the tooth count that the gear set was made for...
Thank you for the video.
Busted Knuckle Garage 48:00
If you name an axle, it HAS TO BE Foley. Axl Foley. Second choice? Rose. Axl rose.
I'm rooting for a Jana 54 kit on that 44... Just sayin. 🎉. Love that you use the HF 7 inch. Little known hero.
As the plate falls to the floor “was that hot? Nope just don’t take long to look at it”. 😂🤣😂
You aren’t joking about the amount of grinding on the 05 and up stupiduty axle! Tons of grinding! I don’t have a plasma cutter so it was only a saws all and cutoff wheel on the driver side.
One thing you could do to get the brake drums off is to use a hole saw and make holes in the backing plates then use the air hammer through the holes to the inside of the drums.
BUSTED KNUCKLES films for the win
Yeah, on those break drums when I worked on semi. Trucks, mainly semi trailers. You just take a really heavy hammer Always keep a 12 pound sledge, but A8 pound sledge. Hammer with the right handle, you can smack let drum and they'll split in 2 pieces LOL I would definitely recommend strapping. The axle to the Jack stands. Or maybe even taking them off the jackstands, ha ha ha. It works and it's less work I think 😄
Nice, makes me wanna shave my eaton ho72! also, used your discount code on the affordable bender, thanks!
Awesome, it's a great bender!
Great episode!
sweet build can't wait to see final product. but most importantly very educational and keeping us normal backyard project hobbies in mind. would have to say its @BustedKnuckleVideo
I personally love salvaged old axles. I run an old 14 bolt with a 15 bolt shave and SD60 under my JKU.
Why not skid plate the bottom of the 44. Great video and lots of good tips.
Put colt 44 door handles on it😅 love it.😊
Very informative, thanks.
That plasma cutter did impress me. I bought one that that said it could do 1/2 and couldn’t do 1/4. So I went and bought one that could do 1 1/4 and does 1/2 with no problem now. lol. I have never tried anything over 5/8 with it.
#Busted Knuckle Garage Great work Colt great content another great channel