THANK YOU I was having trubble starting it up for like 2 hours and I had done everything except going on my phone to check the last thing and there was nothing in their manual docs explaning what to do, you saved me ;-;
Hey guys, just wanted to add a bit of info for those struggling to get the model in VBridger to move. If you're using a VPN, it may block VBridger from being able to connect to your IPhone. If possible, enable split tunneling on VBridger so it can connect. This worked for me after the router reset trick didn't do anything, so I hope this helps!
So, I can't seem to stream my iPhone to PC, which therefore means I can't use Vbridger I think? I was able to get my iPhone to track my face via USB, but if it demands that I connect to VTS using wi-fi, for whatever reason, it won't connect. I've followed your instructions step-by-step but my phone won't seem to connect.
Thanks a lot for insightful video , I am just facing 2 issues currently and I am not sure why: 1st when I downloaded vtube studio and steam on my iPhone and tried to link it to my pc account to get my model and its toggles on the iPhone it didn't happen automatically after I followed the steps and 2nd the Vbridger refused to react to the IP address even though it is correct any idea why?
It doesnt work for me. It connects to vtube studio but I dont think it connects to my phone and I dont know why Ive done everything you said and checked the ip 3 times but it doesnt work. I dont get a error message or anything it just doesnt do anything the sample face does not show up in vbridger and it doesnt work in vtube studio either despite being connected with it. Is it because Im connected via usb with my phone?
Try restarting your router! A few people have had this issue and it seems that restarting their router and then repeating the process (entering the new IP) makes the VBridger face move! Not sure what it is about the program that does this but I hope this works 🙇♀️
Super helpful and did get it to recognize on my iphone, and says it is connected I've noticed the vbridger face on the app isn't moving yet it does say its connected any tips on this?
Unfortunately I'm not sure why it's not moving however after looking in the official discord, it seems someone had a similar problem and it was solved by restarting their internet router!
Thank you very much for your reply and taking the time to look into it! That fixed the problem instantly. Your video was very helpful there weren't to many out there that went into the detail of how to set it up like you did so thank you for that🤍 @@_universecat
If the model on the VBridger screen isn't moving, try resetting your Internet router! This is something that some people have found helps so I hope it helps you as well 🙏
im having trouble getting vtube studio to request access to local network. theres nowhere i can turn it on either if it doesnt request it. any idea on how to fix this? im so lost ;-;
For anyone not getting vbridger not moving on their screens; I missed at @1:14 where she said that you need to scroll down on your phone to activate the 3rd party pc client. That immediately fixed my issue 🤦♀
it was connecting yesterday but when i tried to connect today it wont connect to my ipad all of a sudden :( i didnt change anything idk why it's not working. it lets me use vtube studio just fine on my pc and ipad, but it won't let me use vbriddger
Don't connect your phone to VTube Studio directly, this is wrong. VBridger is sending all the tracking data to VTube Studio, there's no reason to send it to two programs. (possibly this wasn't wrong at the time this was made, I don't know but it is wrong now)
This also means you don't have to pay for the mobile pro version. That being said, if you're making money from using the app I encourage paying for it anyway.
Can I ask, u mentioned abt if we have a model for vbridger, I’m using a premade model by @KenKenMo6, how do we know if the model is okay for vbridger, and how to import it if it’s compatible? I use phone for tracking, since I don’t know how to turn on my camera 😭but the trackings also better on phone however I do want access to the toggles, which r only on pc or a desktop. Anything w a keyboard really
Generally speaking, any model can work with VBridger but only models that have been rigged with VBridger in mind will have the specific kind of mouth/eye tracking. If it's a premade model, then it would likely say somewhere in the listing where you bought it if it has VBridger rigging. If it doesn't have VBridger rigging, it can still be tracked with VBridger regardless! In regards to importing, you can load the model in VTubeStudio and connect it to VBridger and it should track regardless of if the premade model has VBridger rigging or not!
@@_universecat srry im on my other acc bc i logged myself out lol, but im having trouble connecting my iPhone and pc. it keeps saying the status is connecting but won't...if that makes sense
@@Emi.Player_2 I'm not certain what the exact issue could be but I would double check that the IP Addresses match (cuz sometimes the IP will update and it's no longer the same). In that same vein, restarting your internet router and going through the setup fresh has also helped people with some issues!
![[VBridger] Live2D/VTubeStudio Complex Mouth Tutorial](http://i.ytimg.com/vi/h6p8wUtFWYY/mqdefault.jpg)
THANK YOU I was having trubble starting it up for like 2 hours and I had done everything except going on my phone to check the last thing and there was nothing in their manual docs explaning what to do, you saved me ;-;
Hey guys, just wanted to add a bit of info for those struggling to get the model in VBridger to move. If you're using a VPN, it may block VBridger from being able to connect to your IPhone. If possible, enable split tunneling on VBridger so it can connect. This worked for me after the router reset trick didn't do anything, so I hope this helps!
Thank you, this is very helpful! I was trying to find out if ifacialmocap was needed for vbridger, glad to know it's not needed
Thank you! Very helpful
can't we connect thru usb? or is it all wifi?
Has anyone else had an issue with the Local Network option not being in your settings for the mobile app?
So, I can't seem to stream my iPhone to PC, which therefore means I can't use Vbridger I think? I was able to get my iPhone to track my face via USB, but if it demands that I connect to VTS using wi-fi, for whatever reason, it won't connect. I've followed your instructions step-by-step but my phone won't seem to connect.
Is it possible to connect a Samsung phoje to vbridger? As that is what i have
no, only iphone x and above has the technology required for this type of tracking unfortunately.
Thanks a lot for insightful video , I am just facing 2 issues currently and I am not sure why: 1st when I downloaded vtube studio and steam on my iPhone and tried to link it to my pc account to get my model and its toggles on the iPhone it didn't happen automatically after I followed the steps and 2nd the Vbridger refused to react to the IP address even though it is correct any idea why?
I’ve tired to connect with IP it connected but the model didn’t show up
It doesnt work for me. It connects to vtube studio but I dont think it connects to my phone and I dont know why Ive done everything you said and checked the ip 3 times but it doesnt work. I dont get a error message or anything it just doesnt do anything the sample face does not show up in vbridger and it doesnt work in vtube studio either despite being connected with it. Is it because Im connected via usb with my phone?
Try restarting your router! A few people have had this issue and it seems that restarting their router and then repeating the process (entering the new IP) makes the VBridger face move! Not sure what it is about the program that does this but I hope this works 🙇♀️
For some reason, the 3rd Party PC Clients section isn't there for me.
Same
@@sketchy.raven. Found the solution-that section is on your iPhone interface, not the PC.
heyo I had this problem too, but the '3rd party pc clients' was on the Iphone not the PC settings
thank you love
Super helpful and did get it to recognize on my iphone, and says it is connected I've noticed the vbridger face on the app isn't moving yet it does say its connected any tips on this?
Unfortunately I'm not sure why it's not moving however after looking in the official discord, it seems someone had a similar problem and it was solved by restarting their internet router!
Thank you very much for your reply and taking the time to look into it! That fixed the problem instantly. Your video was very helpful there weren't to many out there that went into the detail of how to set it up like you did so thank you for that🤍 @@_universecat
Can an iPhone 13 be used for this?
great tutorial, however, my vbridger is connected to my phone but is not moving, do you have any info on how to fix this?
If the model on the VBridger screen isn't moving, try resetting your Internet router! This is something that some people have found helps so I hope it helps you as well 🙏
im having trouble getting vtube studio to request access to local network. theres nowhere i can turn it on either if it doesnt request it. any idea on how to fix this? im so lost ;-;
Hello, does it work on Mac OS PC? I don't find a version for it
For anyone not getting vbridger not moving on their screens; I missed at @1:14 where she said that you need to scroll down on your phone to activate the 3rd party pc client. That immediately fixed my issue 🤦♀
didnt fix it for me
Is it possible to do this through usb?
what if there is no 3rd party client option?
it was connecting yesterday but when i tried to connect today it wont connect to my ipad all of a sudden :( i didnt change anything idk why it's not working. it lets me use vtube studio just fine on my pc and ipad, but it won't let me use vbriddger
Try restarting your Internet router and entering the IP address again! Not sure if it'll work but it's worth a shot 👍
i cannot connect my vtube iphone to pc?? can anyone help me??
Don't connect your phone to VTube Studio directly, this is wrong. VBridger is sending all the tracking data to VTube Studio, there's no reason to send it to two programs.
(possibly this wasn't wrong at the time this was made, I don't know but it is wrong now)
This also means you don't have to pay for the mobile pro version. That being said, if you're making money from using the app I encourage paying for it anyway.
THANKS🥹
Censoring a private ip 💀
Right
And?
Can I ask, u mentioned abt if we have a model for vbridger, I’m using a premade model by @KenKenMo6, how do we know if the model is okay for vbridger, and how to import it if it’s compatible? I use phone for tracking, since I don’t know how to turn on my camera 😭but the trackings also better on phone however I do want access to the toggles, which r only on pc or a desktop. Anything w a keyboard really
Generally speaking, any model can work with VBridger but only models that have been rigged with VBridger in mind will have the specific kind of mouth/eye tracking. If it's a premade model, then it would likely say somewhere in the listing where you bought it if it has VBridger rigging. If it doesn't have VBridger rigging, it can still be tracked with VBridger regardless!
In regards to importing, you can load the model in VTubeStudio and connect it to VBridger and it should track regardless of if the premade model has VBridger rigging or not!
@@_universecat Ahhh oke, tysm!!!
@@_universecat srry im on my other acc bc i logged myself out lol, but im having trouble connecting my iPhone and pc. it keeps saying the status is connecting but won't...if that makes sense
@@Emi.Player_2 I'm not certain what the exact issue could be but I would double check that the IP Addresses match (cuz sometimes the IP will update and it's no longer the same). In that same vein, restarting your internet router and going through the setup fresh has also helped people with some issues!
@@_universecat thank u sm for this ;v;!