thank you very much I appreciate the kind words👍🏽 I will continue to try and make the best most strait forward videos I can for everybody. I like seeing people succeed and fix their vehicles!
Just wanna say this is the most useful video I have ever found on RUclips, very well executed and well explained with lots of detail. I also just installed the same kit 😎
I’m not 100% sure, usually I just align the mirror up centered with the housing and then gently start to push it on. Another thing you can do is go to the other side of the car and turn the mirror all the way to one side and peak behind it to see if you can see where the metal tabs go.
Yeah I added those mirrors to my truck a 2008 Ford F150 but and I plugged it in and now I’m when I turn my signal on my inside ceiling lights flash and they don’t really blank outside what did I do wrong
One light illuminates sequentially and the other would just light up like a normal blinker. Check out a video of it, you'll be able to understand it better when you see it.
You could probably do an “add-a-fuse” and add in a circuit coming from your blinkers and then some how run the wires into your doors and into the side mirror housing. Seems like it would be a lot of work, they may sell kits online for this though.
@@jaimelopez5470 of course no problem, so you would want to buy the LED light and some wire, and just send a power and ground wire from the LED light, into the side mirror, and connect one to power and one to ground.
These ones wont because they're both just solid color lights, but they may make a type of light that does that. It would need more then 1 colored light inside the lens.
The camera just made that look blue, it was actually a bright white, and since it was a “smoked lense” it’s slightly tinted over the white which makes it look blue on camera.
I have fordf150 2013 the problem is all the signal lights work 😑 except the driver side mirror signal lights not working I check all the fuses relay everything works perfect also I install a new 😀 I have the same problem what I can do thx 😀
You could get a multi meter and test to see if your getting voltage through the wires. Make sure you turn your blinker on and you should see the voltage every time the blinker blinks.
@@VinnieT thanks man. Doesn't seem to show if they come with the plugs for the front too or not, but yolo I guess haha. Wish they sold them as a full kit!
Hahah yeah I see what your saying, this was my buddies truck and he ordered the part for it back then, Otherwise I’d be able to confirm for ya. Either way all you have to do is splice 2 wires if you don’t have the connector. One wire connect to power and the other to ground. The wiring diagram is in the video and If you run into any trouble just leave a comment and I’ll try to help ya out!
I've seen a lot of negative comments about these saying that some of the LEDs have burned out after only a short amount of time. Anyone having this issue?
Behind the mirror, very carefully pry at the plastic tabs, you can see in my video after I have the mirror off, there's 2 big tab slots where they sit.
Dude, why aren't all the other videos on RUclips this straight forward? I don't think I've seen a better executed how to video. Awesome!
thank you very much I appreciate the kind words👍🏽 I will continue to try and make the best most strait forward videos I can for everybody. I like seeing people succeed and fix their vehicles!
Just wanna say this is the most useful video I have ever found on RUclips, very well executed and well explained with lots of detail. I also just installed the same kit 😎
Thank you, I appreciate your support and glad this helped!
Interesting... I looked at these mirrors for like an hour. 😂... THANKS!!!!
They are great mirrors, glad this helped!
Awesome video mate much appreciated.
Thanks for your support👍🏽 glad this helped
Where did u find those light
Do you have a link to those wire connectors
Thankyou so much I was looking for this.....
Glad this helped! Thanks for watching!
can you give me more detail on how to pop mirror glass out?
That is a great question because I am wondering the same
@@sergioamathon6599 Here you go: ruclips.net/video/7fRHK5D2coY/видео.html
@@reubinthornton thanks 👍
Thanks for this because we just broke ours just “prying it with a flathead”
Did you disconnect the battery before adding those?
No you do not have to disconnect the battery.
Would like to know where can I purchase that product that you're displaying
Yes I have put Links in the Video Description.
Great Video
Thanks for checking it out
Little metal grab tabs...when you push the mirror lens back on do they go inside or outside the holes in the mount.
I’m not 100% sure, usually I just align the mirror up centered with the housing and then gently start to push it on. Another thing you can do is go to the other side of the car and turn the mirror all the way to one side and peak behind it to see if you can see where the metal tabs go.
Where can I buy those lights
@@justinhope2974 I have links in the description for the lights.
Yeah I added those mirrors to my truck a 2008 Ford F150 but and I plugged it in and now I’m when I turn my signal on my inside ceiling lights flash and they don’t really blank outside what did I do wrong
That's odd, do the interior lights turn on and off flashing? Or are they on and just dimming when the blinker flashes?
What’s the different between the switch back sequential lights and the non-switch sequential lights????? Awesome vid man
One light illuminates sequentially and the other would just light up like a normal blinker. Check out a video of it, you'll be able to understand it better when you see it.
My truck didn’t come with any, how would i wire it if i installed some new ones?
You could probably do an “add-a-fuse” and add in a circuit coming from your blinkers and then some how run the wires into your doors and into the side mirror housing. Seems like it would be a lot of work, they may sell kits online for this though.
Gracias bro...👌👍
My Ford don’t have any of those lights how can I wired it please send me a tips
Do you know which style mirror you have?
Same but no lights just have the space for put it in thanx for answer
@@jaimelopez5470 of course no problem, so you would want to buy the LED light and some wire, and just send a power and ground wire from the LED light, into the side mirror, and connect one to power and one to ground.
Great video bro 😎
Appreciate it, thanks!
would these hook up the same as the lights that are white and work as a running light, then turn yellow and are sequential when the blinker is on
These ones wont because they're both just solid color lights, but they may make a type of light that does that. It would need more then 1 colored light inside the lens.
How do you get the white lights to run all the time?🧐, It's supposed to be running lights and blinkers (for the reflector side)
To be honest I am not sure. If your new lights come with wiring instructions it may say it on there, or check their website maybe.
where did u find it in blue ur link dont show it in blue just amber
The camera just made that look blue, it was actually a bright white, and since it was a “smoked lense” it’s slightly tinted over the white which makes it look blue on camera.
I have fordf150 2013 the problem is all the signal lights work 😑 except the driver side mirror signal lights not working I check all the fuses relay everything works perfect also I install a new 😀 I have the same problem what I can do thx 😀
You could get a multi meter and test to see if your getting voltage through the wires. Make sure you turn your blinker on and you should see the voltage every time the blinker blinks.
How do you wire them to make them turn 24-7
Sorry I’m not understanding the question.
Looking to order the exact products you got, but the ones in the link don't look like they come with a new wiring harnes.
Hey sorry about that, I just updated the Description. I believe you might have been looking for these. amzn.to/3qLt1jy
@@VinnieT thanks man. Doesn't seem to show if they come with the plugs for the front too or not, but yolo I guess haha. Wish they sold them as a full kit!
Hahah yeah I see what your saying, this was my buddies truck and he ordered the part for it back then, Otherwise I’d be able to confirm for ya. Either way all you have to do is splice 2 wires if you don’t have the connector. One wire connect to power and the other to ground. The wiring diagram is in the video and If you run into any trouble just leave a comment and I’ll try to help ya out!
I've seen a lot of negative comments about these saying that some of the LEDs have burned out after only a short amount of time. Anyone having this issue?
I have also heard that, I believe it’s luck of the draw, a lot of these LED parts are cheaply made.
How do I pry the fucking mirror off?!
Behind the mirror, very carefully pry at the plastic tabs, you can see in my video after I have the mirror off, there's 2 big tab slots where they sit.
I have the exact same truck, color, rims hahahahah