WARNING: In the video, installing the tail servo, ignore most of what you see and hear about orienting the spline and horn in the timestamp range 21:44 - 23:34. It is wrong. Jump ahead to 23:35. The instructions at 23:35 - 23:47 are correct. Briefly at 23:48 - 23:50 it jumps back the wrong orientation again.
Thanks for the build videos ! I just built a TB60 and I’m finding the tail belt tension with the everything backed out is very tight. Did you have that experience? Feel like there is drag in the system running this tight.
Around 2:59 Jeff says "Tapered side of the head dampener faces the headblock" but I have never seen this in an Align manual and the TB60 and 550X Instruction Manuals show the tapered side facing out, into the blade grip. Can anyone clarify?
@@westhobbiesrc8051 are you sure ?? in the manual i looks like the other side around ... also with other helis ... the tapered side is always towards the grip and not the block ... it also came preassembled the other way around ... if i remember correctly
Jeff west!! The goat of heli videos. Love watching his videos
Thank you buddy!
Just got the TB40 and watched this build anyway..... So much good information. You da man, makes it look easy.
Thanks for your video, helped me a lot !
That loctite looks like good quality. Can you send a link so I can try it out? Great video. Thx
WARNING: In the video, installing the tail servo, ignore most of what you see and hear about orienting the spline and horn in the timestamp range 21:44 - 23:34. It is wrong. Jump ahead to 23:35. The instructions at 23:35 - 23:47 are correct. Briefly at 23:48 - 23:50 it jumps back the wrong orientation again.
Thanks for the build videos !
I just built a TB60 and I’m finding the tail belt tension with the everything backed out is very tight. Did you have that experience? Feel like there is drag in the system running this tight.
Well done videos
Fact: The best way to build a heli is send it to Jeff. 🤣
Thank you! I hope the video was helpful!
Absolutely. Thank you
How much does it cost to have him build a TB60 ?
Great build.
What brand of cordless power driver are you using to tighten the screws
Hi my ball links won't screw into my align setal servo horn any adv8ce will help.
Around 2:59 Jeff says "Tapered side of the head dampener faces the headblock" but I have never seen this in an Align manual and the TB60 and 550X Instruction Manuals show the tapered side facing out, into the blade grip. Can anyone clarify?
Tapered side towards the inside of the head block so it fits in the rubber damper.
@@westhobbiesrc8051 are you sure ?? in the manual i looks like the other side around ... also with other helis ... the tapered side is always towards the grip and not the block ... it also came preassembled the other way around ... if i remember correctly
Hello
Any information for iventual TB50???