Interior Complete on the Pro Touring LS3 69 Camaro!
HTML-код
- Опубликовано: 20 сен 2024
- Finished the tedious process of cleaning up new wiring and tidying up existing wiring. Also modified the center console from Auto transmission to 6 speed manual with some custom fiberglass work. Couple other touches here and there and we've got one sharp looking interior! Lots more coming on this car, she's almost ready for the street!
AutopiaLA Crash:
• 1,300HP Mercury Comet ...
Instagram: @chris_sullyvan
Bro you did such a killer job on this. Thanks for continuing to put out dope content for us to watch.
Freaking awesome bro! Seeing the light at the end of the tunnel…
Now my back hurts just from watching that. Nice work!
I love it man!!!! I’m a ford guy myself that has a project truck I’m doing but I don’t care that it’s a Chevy he is doing everything absolutely perfect never skips on anything keep up the hard work can’t wait to see how the dash goes together
Man, you have the skills and talent. To say I am impressed is an understatement !
Sir I really enjoy your channel as it's very informative and fun to watch
The attention to detail 🤌
how do you not have 100k+ subscribers? awesome content bro. been watching since you got it.
Custom Console By Chris 💪🏾 Great vid bro !
Excellent work! I was skeptical of the console in the beginning. I am using these videos as a road map for my build
im building mine to a pro touring also but i cant afford the ls3 so im doing 383 stroker
Sweet
Looks unreal!! Awesome work, cant wait to see the finished product!
Thing looks sweet man. Good job!👍
Niceeeeee job with the console!
Tons of progress, Camaro is looking killer 🤜🏻🤛🏻🤘🏻
Great work Chris.
Great job brother!
I appreciate it!
Nice editing skills. Really makes it exciting to watch. What platform you use to edit?
Thanks! I use Davinci Resolve.
Really love this LS3 ‘69 Camaro! It’s a suitable beast.
Great work as usual
Absolutely enjoying your channel. Great show chap!
Chris, looks great! While the belts are a big improvement over the lap belts, I would highly suggest getting a harness bar as that shoulder harness angle is far from ideal from a safety perspective. Great job otherwise!
Absolutely Chris, please take SS OFFSHORE's advice here. With those shoulder harnesses being anchored to the floor, in a significant impact event, both the driver and co-pilot will very likely suffer from severe spinal compression if not a broken back. Weld-in and install a harness bar that has those shoulder belt attachment points being equal to or slightly above the drivers shoulders.
But would this be a safer solution than just running a lap belt? I don't have a B pillar in my car, so a harness bar would be difficult to install.
Next time you fiberglass, use that Reynolds’s nonstick aluminum foil! Works fantastic
Good idea man!
Looking good brother!
You're very talented... Nicely done, Sir
Love the Seats they look perfect nice job
Looks amazing! Interior is sick!
Man I can't wait to start on mine
it's the same console as the goonzquad guys 🤘🏻💪🏻 That’s awesome
Awesome man looks so sweet! Honestly took me a while to get into this build as I found your channel through da ctsv build but I’m on board now!
Thanks man 🤙
Great job Chris I’m working on my camaro
Great channel, great content , hoping he continues to grow. Nice job!
That's one Killer Camaro.
Awesome video never a bad one bros a beast
Looking SICK bro!! 🤙
Looks great! Try some SEM Trim Black on that console if you're unhappy with the current finish.
looks great. need to get a dimmer switch grommet for your carpet.
Looks great! Awesome job 🎃
Love the camaro, wish is was a 67 or 68, but still badass👍
Awesome job you do first grade work keep em coming
I really do envy you bruh. If I could do half the shit you've done with your cars I'd be further ahead with my project car ....🤞maybe one day! Keep up the great work and videos!
Beautiful
Beautiful work man 😎
Might want to check into the time for the GPS to get a position before your speedo will work. This could cause a delay in activating your Reverse lockout solenoid. I think it can take up to 4 minutes if not a "hot start" which in turn would keep your lockout from working. I am looking for solutions as well for mine. I think I will be using the Bowler 3 in one harness and run the square wave signal of the VSS to the pins on the B4 connector(pins 14 &18 i think) Holley sells this plug by itself if you bought the system without trans control like I did. The only bad thing is it will use up one of my limit of 4 i/o on the terminator max kit. Of course I am just studying this so i could be completely wrong. Just wanted to give you a heads up in case you run into issues.
Good to know. I'll keep it in mind.
Nice job on the center console, but I would've pulled that boot down a few inches and let more of that beautiful billet shift stalk showing. I think it would really pop with all the black in the interior.
I didn’t notice I wasn’t subbed until this video but I really enjoy watching all your builds man, from the budget V to the C6 but especially this ‘69! Made sure I’m subbed now
Those seats would be nice in a C5 or C6 Corvette.
Amazing job man!!
Dang…. Legit ness😎🤙🏼
Ths man had Young Dolph on the tunes ... I knew I liked you .....
Super clean build, what is the center console from?
Very nice! Did you ever think about using the center console from the donor Camaro in this?
👍… for the Corbeau seats , do you buy a new seats brackets?? Or a new
Hi Chris.. question on your seats. I have the same ones in my LS swapped 80 TA but the drivers side seat back does not come forward enough. The passenger is fine. Wondering if u had any issues. Corbeau is sending a new reclining mechanism so hoping that fixes it. Beautiful 69. You do great work!!
Hmm, I haven't had any issues
I like the simplicity and utility of that center console, you don't happen to know what it is/where it's from, do you?
I believe its from a place called "modern classics". They make a few variations of it
I wonder if the LSA supercharger would be a good addition to this project? Supposedly they bolt straight on to the LS3
looks great! Just ordered one of those center consoles. What did you do about the can bus connector for the Holley? I might just leave it hanging out, try to make a mount for it on the side, want access
Where did you order the console from?
That's what I'm wondering
I really like that fiberglass console. Do you know what brand it is or where I can find one?
Hey Chris had a question where did you get that center console love it . Or what car did it come from would really appreciate it thanks
Came in the car. I beleive it is from a company called Modern Classics
@@ChrisSullivan69 thanks I’ll look into it
Do you answer questions regarding the build. I have a few
Very nice job..Can you please tell me where you got your front seats and who makes them? I would like to change my front seats and rear bench seats in my Jeep Trackhawk to 4 bucket seats just like these. Thank you very much.
Those are corbeau RDX seats
Fuck yeah 🤘🏼
Have you thought about painting the shift knob?
I don’t understand how you can anchor the harnesses off the rear seats. Does it not change the fastening geometry
Great job... how much were seats?
$800ish if i recally correctly
Are the Corbeau seats adjustable?
What seats did you use please?
Hey chris i also have 69 camaro im building found your chanel by accident but glad i did great content. I have a question for you where did you buy the custom consol from?
Great job , looks killer just wondering if you could tell me who makes the console? Would love one in my a body. Appreciate any help
I get ssssssssso tiered watching you work will I sit on my couch 😂. I would have figured you out for a gated shifter instead of a boot.
Ps when are you going to install a ductless mini split for AC for the garage so I don’t have to hear your young ass complain about being to hot in the summer time (as you are working your ass off) you can get heat out of them too.
✌️
By the way excellent work. I bet your parents are proud. 🎉