When you say all makes/models, you're not kidding. Had this issue in my 2020 Ram Limited. Luckily it happened right under the 36k mile mark and the dealership replaced my entire dash. I think you did an amazing job on your dash!
Man, your channel is the sh*t. I don't watch full vids until I ran up on this channel. Keep going, it is going to blow up one day. The dash dime you drop was sick!!!
Hey man I love the build I recently purchased a 2006 c6 base model that has been supercharged with a vortech v3, a Texas speed stage 3 cam, and a built stage 2 1/2 6l80 transmission and boy she is fun
My luck! Just as soon as I got everything put back together and was applying that dash dressing it would have started delaminating again! lol 😂 Good job! 😎🤙🏼
Thanks for taking the time to complete this video. Just purchased a 13 427 convertible 2 months ago and noticed the dash separation. Happy to know with a little patience it can be fixed. I’m still going to hire someone to complete this task for me as being 69 can’t bend like I use too. Again thanks !
Of all the endless threads I've read on the Corvette Forums and other places, that's by far the best end result I've seen someone achieve. I've seen people inject adhesive through the top, cover it all with new leather, cut/splice in a new section, etc.... but the guy that has never done it before nails it. If I weren't so afraid of busting off more plastic tabs in my interior, I might try this one.
Honestly, the Corvette C6 Z06 is my actual dream car in velocity yellow. Except they are rare to come across in the UK so you only see them once in a blue moon. In fact I watched your entire series of the twin turbo Corvette, as I was watched Mat Armstrong's twin turbo Gallardo LP560-4 series a while back, then the thought of a twin turbo Corvette C6 Z06 came to mind. Really loving the car honestly and hopefully we can see more twin turbo Corvette content in the future, although I am also interested in your other projects so I'll be sure to check them out. I'm sure the Corvette could smoke the Gallardo given the opportunity, lol
I had to laugh in the beginning of the video you struggled a little bit to get out of the car. Wait to you get to your sixties and try that. But I was Just like you for almost 50 years with my cars. Had 16 corvettes over my life time plus a host of other cars. Would obsesably clean them and take them to car shows. I once took 2 vettes, a Viper and a Prowler to a car show. Fun times!
Had to have my 2008 vette dash repaired for the exact same reason even though the car is garage kept. The shop was able to pull the leather tight and glue it back in place. That was about 5 years ago, still looks like new. Awesome job on the repair looks great.
Pulling my/ any dash is the ONLY NO-NO in my head... lol. Congrats... you're definitely a badass REAL owner... guess I will graduate but jeeezus... lol.
BTW, I have the same attitude about this kind of stuff. "It's already bad... how much worse could I possibly make it?". Think it turned out really well. Staples should help keep it from creeping back up. 🤜
Good Job brother, I've watched some of your videos and the one thing I always notice about you is, you're a perfectionist in everything you do. Also I live in Maryland Not too far from that DAP company they make great products. Once again great workmanship. And cool Whips/Ride's/Cars... Lol
More than good enough to not pay someone $1000+ to get an indistinguishable result. Motivating me to glue the edges of my dash pad where it's peeling up 💪
You got the same problem that I have too many cars and not enough time to work on them good job on the dashboard love that that yellow Terminator they really like to have one but you live on the other side of the world❤
Looks great, now lets see how it holds up! I have feeling high heat w/ long & consistent exposures is a major contributor to this issue. A garage/sun shade would probably work wonders for owners of these . . .
“I’m the upholstery guy now” had me rolling 😂😂
15:26
😂😂😂😂😂 #legend
That was definitely funny! Chris is very quick on his feet, one smart Whittey guy!! Great sense of humor too! Very talented mechanic!
Too funny
Yup. He killed it😂
Your wife is a good soul for helping out in the garage. Amazing work as usual. Well done.
And having patience
Don't even have to start the video before I give it a thumbs up. Excited for any content!
Getting it done! So satisfying to not need to depend on anyone but yourself.
I've always said, if one man can do something, another man can! Great job Chris!
Great looking job! I was already thinking maybe the shop knew that the project was over their head, and I am totally serious about that!!
If, when you finish, just about anything can outrun the car, something isn't wired just quite right!!
I installed one of those Evap Canisters on my 2006. Pain in the ass for such a small swap, in a tight spot.
Awesome job on the dash! You are def going to help a lot of people with that same issue.
by far the best car channel on youtube
Every single time those turbos spool I'm having a crisiiiiissss
When you say all makes/models, you're not kidding. Had this issue in my 2020 Ram Limited. Luckily it happened right under the 36k mile mark and the dealership replaced my entire dash. I think you did an amazing job on your dash!
The noises that car makes are incredible. I wish I had the money to twin turbo mine just so it would sound like that haha
Best feeling about DIY, is knowing you saved thousands of dollars. Came out great
Nice work keep going 👍🏼
Man, your channel is the sh*t. I don't watch full vids until I ran up on this channel. Keep going, it is going to blow up one day. The dash dime you drop was sick!!!
Terminator and 427 Z06 ..... DOPE!!!
wow that was impressive you have many talents
The leather on my Maserati coming off as well. It’s glued to dash.
Sully, you did a hell of a job on the dash!
I also enjoy seeing date stamp codes. I wish some of them had peoples names on it so I can be like "John Doe... in 2004 you did a heck of a job."
Fantastic results on the dash! I'm always motivated by how resourceful you are with your projects.
THAT Z06 ITS A BLAST 💥 KEEP ROLLING MAN 👍👏
I'm back watching this again. I NEED a car like this in my life. 😁
That dash tho...you are "the upholstery guy NOW" that C6 is a beast !
Wifey with the random thumbs up from the drivers side 😂😂😂😂😂
😂😂
Hey man I love the build I recently purchased a 2006 c6 base model that has been supercharged with a vortech v3, a Texas speed stage 3 cam, and a built stage 2 1/2 6l80 transmission and boy she is fun
My luck! Just as soon as I got everything put back together and was applying that dash dressing it would have started delaminating again! lol 😂 Good job! 😎🤙🏼
Photographic memory, comedian, actor and upholstery guy!😂😂😂😂 great video!!!
Thanks for taking the time to complete this video. Just purchased a 13 427 convertible 2 months ago and noticed the dash separation.
Happy to know with a little patience it can be fixed. I’m still going to hire someone to complete this task for me as being 69 can’t bend like I use too. Again thanks !
Of all the endless threads I've read on the Corvette Forums and other places, that's by far the best end result I've seen someone achieve. I've seen people inject adhesive through the top, cover it all with new leather, cut/splice in a new section, etc.... but the guy that has never done it before nails it. If I weren't so afraid of busting off more plastic tabs in my interior, I might try this one.
Damn dude that came out killer!! Great job!!
Fantastic looking car and lovely sound. 👍🇬🇧
Cold Start 🔥🔥🔥🔥🔥🔥🔥
COLD START!
COLD STARTTTTT!!!
I was not expecting that dash to come out as mint as it did lol. Great work!
dash came out great! Which I didn't doubt, you do great work.
God damn, dude. The black on black is slick. Sick car even with no mods. But of course, the more the merrier. Also, really enjoyed the video 👍
Cold starts are freakin awesome!!!
Criminally underrated channel bro, been rockin w you since the blue V when you had around 12K subs keep up the content 🦾🫡
Appreciate you man!
Definitely a nice C6 Z Chris! I believe the silhouette and design of these have a timeless appeal, and will age well.
That wheels and stance man looks insane!!!!
Honestly, the Corvette C6 Z06 is my actual dream car in velocity yellow. Except they are rare to come across in the UK so you only see them once in a blue moon. In fact I watched your entire series of the twin turbo Corvette, as I was watched Mat Armstrong's twin turbo Gallardo LP560-4 series a while back, then the thought of a twin turbo Corvette C6 Z06 came to mind. Really loving the car honestly and hopefully we can see more twin turbo Corvette content in the future, although I am also interested in your other projects so I'll be sure to check them out. I'm sure the Corvette could smoke the Gallardo given the opportunity, lol
Darn, there’s nothing you can’t do. I really like your work. Been watching since you started. Keep up the good work
I appreciate that! 🤙
Fricken looks perfect dude!
Came out awesome!!! Car looks sick!!!👍🏻
I had to laugh in the beginning of the video you struggled a little bit to get out of the car. Wait to you get to your sixties and try that. But I was Just like you for almost 50 years with my cars. Had 16 corvettes over my life time plus a host of other cars. Would obsesably clean them and take them to car shows. I once took 2 vettes, a Viper and a Prowler to a car show. Fun times!
I .... REALLY WISH we can all have results like yours. Being meticulous and patient paid off here. AWESOME 👍
Great Work! Glad you were able to fix the issue!
Always look forward to your videos!!
Turbos sound good - that dash came out awesome!!
Damn that’s a awesome job on the dash!
Had to have my 2008 vette dash repaired for the exact same reason even though the car is garage kept. The shop was able to pull the leather tight and glue it back in place. That was about 5 years ago, still looks like new. Awesome job on the repair looks great.
Pulling my/ any dash is the ONLY NO-NO in my head... lol. Congrats... you're definitely a badass REAL owner... guess I will graduate but jeeezus... lol.
GREAT JOB CHRIS !! YOU SHOW ALOT OF PATIENCE !!! JESSE VIA LAS VEGAS
Holly shit!! Looks incredible!
The “Bryce Harper” of automobile restoration. Great job man!
Thank you for share all the process,I have the same problem in the same color 😂 Abraço de Portugal
I have that 0449 code on mine. Now I know how easy it is to fix. Thank you Chris.
Dash turned out awesome !
Excellent work! Textbook save 🏁👌
Man! I doubted you would have been able to repair it. Keep us updated with the results.
goooooood lord did that turn out perfect... 10 out of 10
BTW, I have the same attitude about this kind of stuff. "It's already bad... how much worse could I possibly make it?". Think it turned out really well. Staples should help keep it from creeping back up. 🤜
Becoming one of my go to channels, love the content keep it up 👍
Good Job brother, I've watched some of your videos and the one thing I always notice about you is, you're a perfectionist in everything you do. Also I live in Maryland Not too far from that DAP company they make great products. Once again great workmanship. And cool Whips/Ride's/Cars... Lol
leather will shrink from it just drying out. which is counter intuitive to what condition you want your interior
Great work on that dash!
As always another great video keep up the awesome work brother I wish I had a fraction of your talent. I love watching your videos.
Wow...that dash came out amazing. You give hope to those who have none on doing things like this. Great Job!
Great work man turned out great. Love the channel and how you can fix everything by yourself. 🙂 Your fan from Saudi Arabia
Damn! That thing is awesome!
Good work, good teaching lesson
Great job on to tha Cobra!!!!!
You’re a brave man tackling that ! Great job! 👍
My favorite model of the vette 💪🏾
****, man if i had a garage, this video has encouraged me to tackle this task myself. I have a shrunken dash thats not as bad as tbis one.
Well done on the dash
Can't wait to see this on the road again.
Nice job on the dash!
Beautiful and Satisfying ❤
good job on the dash came out like new vett sounds good 🔥
I feel the same way bout mine 🤟🏽🤟🏽🤟🏽‼️ time to let the c6 wake 🆙
Bruh if you do electrical stuff too than your definitely a Master Mechanic
More than good enough to not pay someone $1000+ to get an indistinguishable result. Motivating me to glue the edges of my dash pad where it's peeling up 💪
Amazing! You could do this for sides jobs.
Love your work.
You got the same problem that I have too many cars and not enough time to work on them good job on the dashboard love that that yellow Terminator they really like to have one but you live on the other side of the world❤
Looks great, now lets see how it holds up! I have feeling high heat w/ long & consistent exposures is a major contributor to this issue. A garage/sun shade would probably work wonders for owners of these . . .
Nice work brother..
The videos are always getting better! Car looks great
One of my newly found favorite channels!! I would trust him working on my C6 in a heart beat! Awesome talented guy :)
Me after every video
"This guy can do anything" 😂
Good stuff again! 👍
Nice job bro you have the midas touch
Another banger LETS GO 🔥
Also, I would love to see a c5 project but I might be biased lol
That looked like a PITA. I just pulled my center console to do my radio, and I told myself I’m never pulling that apart again. Came out awesome 👍🏼
Anything is possible except death.. my mom used to say.. good job 👍🏼
Your work speaks for itself!
Damn that's nice work bro
Looks good young man and hopefully that adhesive holds up this time