I love this channel ! It's nice to see a RUclips channel creator that's informative, has epic cars & not an arrogant millionaire or billionaire with a garage full of supercars that all look the same. Your Z06 is sick ! !
Your videos are inspiring Chris. I have a Z and Boss, but have had an 85 stepside since 87. You and Hammers garage have finally encouraged me to get it "healthy", once again. Suspension started, and having a blast. Cheers from Canada, love your attitude fella :-)
I just subscribed this week and appreciate you for your thoroughness applied to each individual project, I myself have this same trait and very thankful to be blessed with it! Love the Z06 and hope you post more content. I literally want the same setup in atomic orange! Thanks brother
Been about 4-5 months since I’ve watched your videos and damn I’m happy you’re blowing up with subscribers! You deserve it all my man! Keep up the badass work.
My brother had the same EVAP code on his Z06, told him to check gas cap and all of that. Replaced the cap and rear evap canister. Neither of those fixed it and it still smelled like gas fumes. Looked at the front EVAP vent solenoid thats on the motor and it looked fine but we took of the engine cover anyway and realized the plug had managed to wiggle itself slightly loose. We made sure the plug was snug and the code went away on the first drive lol.
I love that you put the "Hybrid" tag on that! Now that I think about it, I had to replace the gas cap on my '10 GS. I got the cap message and had an issue with evap if memory serves... I'm old so, it might not! lol
Just recently found your channel and man your videos are the best! , love this type of informative and fun long videos . Can't wait for an update on the new cobra
Car looks mint!! Great job man I have a black z as well and it looks great on a cloudy day but once the sun shines man the little imperfections drives me nuts.
I have the same damn code on my Silverado. I’m about ready to reprogram that error to not light up the check engine light. Thanks for confirming I’m not crazy.
Man... Just came home.. Made a snack.. and I see this video by Chris. This is by far the best part of the day. Keep up the great work! Our 69 Camaro is a work in progess still!
2 questions: what jack point are you hitting in the front? What are those wheels? They're sick. I have Ace Alloy AFF06s are I had fitment issues. Had to dremel my rear brake calipers a tiny bit to avoid rubbing there, and I had to trim the wheel well on my quarter panels (would have been rolling them if they were metal, but obviously can't do that on fiberglass) and I also get some rubbing on the front wheel well liner, but yours look like a perfect fit, plus I love that deep dish!
Hey man, your videos are awesome. I can just press play and watch them all because I may C6 owner really wanted to know more about those wheels that you have on the black one I believe you say you have them specially made can you tell me what do I get started to get something like that, thank you
Chris, excellent work on the paint! Looks amazing! Do you have a list of all the equipment you use for washing, paint correction, etc.? Also, what are your favorite products to use?
I want a C6 badly!! I had a 50th anniv Camaro that I traded in stupidly. The next goal is a project C6. Your vette is sick and sounds outstanding. Im content with HP somewhere in the 700s. Nothing too crazy. Here in Tx I look to LMR in houston for the great work they do. Hoping 2024 will be a profitable one. Great work on that sinister beast!
New subscriber, great video. Just picked up up a C5 and love it but yours is beautiful. What size are the rear tires, pretty meaty. Keep up the great work and keep inspiring us with the DIY videos.
I have to say man... with how often you refine the paint on your rigs, and end up NEEEDING to lift another project and can't because your lift is already used or whatever... You should look into a set of Quickjax... I bought some cause I cant put a lift in where I am at now... BUT MAN!!! They are SUPER helpful especially with lower cars when doing buffing or paint refinement!! Most of the Quickjax lift 2 feet//24" or more... and they store easily out of the way, have quick disconnects and do not leak fluid... and they work pretty great! *** Also great videos... your content is solid!
@@ChrisSullivan69 They do go on sale supposedly at Costco, about this time every year I hear. Good luck man! I think they will be worth while for you. On my c6, I got about 1/2 inch of space, and can slide them under my car without ramps(quickjax are only 3" in collapsed height)... Even with similar ground kit on... but I am not quite as low as you are.
Love the channel, the way you cut your videos. Have you considered putting new road lamps on the Z06? Morimoto. I like what you put in the Camaro. It looks great. I was watching your latest video and noticed it.
I really thought for a second that you are Jiri Procházka But very good vid. I agree the vette c6 zo6 is one of the best muscle car I have one aswell its by texas speed tuned twin turbo borla exhaust manual transmission 2011 wheel hp Cherry red collor But damnn the black and bleu is brautifull collor 🤝🔥🔥🔥
![KSI - Dirty [Official Visualiser]](http://i.ytimg.com/vi/VoDh1h1dPUE/mqdefault.jpg)
I love this channel !
It's nice to see a RUclips channel creator that's informative, has epic cars & not an arrogant millionaire or billionaire with a garage full of supercars that all look the same.
Your Z06 is sick ! !
Indy Hoosier here too-- can’t get enough of Chris’s channel! Seriously impressive work and love the projects (even paint correction haha). Keep it up!
Your videos are inspiring Chris. I have a Z and Boss, but have had an 85 stepside since 87. You and Hammers garage have finally encouraged me to get it "healthy", once again. Suspension started, and having a blast. Cheers from Canada, love your attitude fella :-)
Awesome! Glad to hear it man 🤝
@@ChrisSullivan69is car foor sell
@@ChrisSullivan69he
Is car foor sell
@@Justin-bz1dp are you having a stroke?
You know how to fix everything, very impressive. Your always working on something it seems, always busy.
Giving the ole girl some love before the winter, gotta love it..
That number plate is perfect
Without a Doubt, the best garage sports car channel. Anticipate Chris's Videos...
That thing is Beautiful! Your right, you can not beat a clean black paint job and on a C6 ZO6 OMG😃
This is the cleanest zo6 on the planet. Absolutely beautiful, can’t wait to get one.
Awesome work on the correction and coating...black paint looks so good when its clean...
Exceptional effort and results my friend!
Finally a vid of the TT Z06
I just subscribed this week and appreciate you for your thoroughness applied to each individual project, I myself have this same trait and very thankful to be blessed with it! Love the Z06 and hope you post more content. I literally want the same setup in atomic orange! Thanks brother
That is the nicest & my most favorite Corvette I've ever seen. Great channel Chris keep'em coming, brother
Thanks! Will do!
Been about 4-5 months since I’ve watched your videos and damn I’m happy you’re blowing up with subscribers! You deserve it all my man! Keep up the badass work.
Appreciate it man!
The whole blackout look is awesome. Blackout headlight tints would perfect it
Your ZO6 CORVETTE looks fantastic! I have a 2016 ZO6 HAS HAD CLEAR BRA!! WHEELS CERMIEC COATED, CERMIEC BRAKE PADS! 😮
Mr. Sullivan, this is DIY car building with class. Much respect boss
That is one hell of a nice vette! Interesting trick with that crow's foot as well. Keep up the good content man.
This is where I got to get my speed and DIY fix when I need it! Thanks Chris you are the best. 🎉
This is definitely my new favorite RUclips channel and you damn skippy it looks sick💪💪
My brother had the same EVAP code on his Z06, told him to check gas cap and all of that. Replaced the cap and rear evap canister. Neither of those fixed it and it still smelled like gas fumes. Looked at the front EVAP vent solenoid thats on the motor and it looked fine but we took of the engine cover anyway and realized the plug had managed to wiggle itself slightly loose. We made sure the plug was snug and the code went away on the first drive lol.
Another great video Chris. You're living the good life man 👍👍
You never miss Chris!!!
I’m a simple man; Chris uploads a new video, I watch and enjoy!
Also just a heads up man, just noticed all the links for the products are for the microfibers
Shoot, i'll get that fixed up. Thanks for letting me know!
@@ChrisSullivan69yessir keep up the great work! I’m about to paint correct and ceramic coat my c5, this video was motivating lol
I love that you put the "Hybrid" tag on that! Now that I think about it, I had to replace the gas cap on my '10 GS. I got the cap message and had an issue with evap if memory serves... I'm old so, it might not! lol
Ah yes, back in the 🐐 car that brought me to the channel.
0:36 that's the coolest thing I've seen so far
This is such goals someday I will get there. Love all the builds!
SHEEEEESH. Another banger, Chris! Love this car and channel!
🤙🤙
GREAT JOB CHRIS !! NOTHING BETTER THAN A BEAUTIFUL BLACK ZO6 !! ENJOY BEFORE THE SNOW HITS YOUR AREA !! JESSE VIA LAS VEGAS
Right before the weather goes to butt, I end detailing my stuff too. Funny how that works and how things always pop up and have no time.
At least it will be nice to look at this winter
The car is amazing! Love the Sonic blue accents!
Chris, the Black Stallion is looking great and menacing!
Another great video man. I gotta say, I love the garage setup. I gotta get some space like that for myself.
That is such a bad ass car man! One of my favorite channels
Appreciate it!
Wat Up Chris! Glad your back
I most definitely love my 08 C6 !!!
Problem w/No Clue solution??
Insert cold beer, problem not so bad anymore!!
The Corvette way of thinking!! Love it!!😊
This video made me miss my C6 Vette.. you have a amazing car collection
The beer break had me rolling on the ground, car looks amazing Chris, thanks for all the time you put into this video
Glad you enjoyed it!
You're my motivator bro!! Always great work you do.
"This car makes all the right noises" took the words out of my mouth. C6 Z06 is my next project.
Wow!!! Beautiful work Chris, easy to tell you wer' raised to show pride in your work ! 👍
Killed it again brother! 💪🏼👍🏼
Just recently found your channel and man your videos are the best! , love this type of informative and fun long videos . Can't wait for an update on the new cobra
Perfection as always
Love the channel, your ZO six is wicked. That is my favorite Corvette.
Appreciate it!
Been watching you since you just joined RUclips love it man.
Appreciate it!
You have the best z06 on the net and YT 🔥🔥🔥🤘🏼
This car is so badass, it looks so good with the welds on 🥵
Sinister
Love the blue accent calipers
Beautiful car
Great job Chris. I enjoy watching your videos, and I've learned quite a bit from you in regards to detailing and maintaining my cars paint.
Car looks mint!! Great job man
I have a black z as well and it looks great on a cloudy day but once the sun shines man the little imperfections drives me nuts.
Black cars are the best/worst lol
Hey Chris do you have any recommendations on where to get a good ground effects/aero kit?
Driving around in this beast with “hybrid” on the licenseplate, epic!
That vette is badass bro!
Chris I love your Z06 super clean
That Z06 is sweet! 🤟
I love your channel man! One of the cleanest c6z's I've seen. And that Camaro🤤
Thanks man!
That pull is crazy
What a vette. Chris, your skills are phenomenal!
You always upload great content. Love your videos. Can’t believe your channel isn’t bigger!
Gotta keep growing 💪 +
Another great one, been waiting for a new video so watch some of the old ones again, the red z06 👍amazing content, top job as always Chris
that sounds AWESOME.!!!
I have the same damn code on my Silverado. I’m about ready to reprogram that error to not light up the check engine light. Thanks for confirming I’m not crazy.
Man... Just came home.. Made a snack.. and I see this video by Chris. This is by far the best part of the day. Keep up the great work! Our 69 Camaro is a work in progess still!
man the spool up sounds insane literally a rocket😳 need more content on that rocket 6 😭
Have a Blk 1300HP C7 ZO6… keep the cool vids coming… 👍
I have to say again those wheels look so nice
Awesome video! Great job!
Z06 content 🔥🔥🔥🔥🔥🔥
I love that car! Keep em coming Chris
Love it brother. Thanks for sharing.
Cant wait to have my c6 z06 but that one is on a whole other level
Another great vid....cheers!!
2 questions: what jack point are you hitting in the front? What are those wheels? They're sick. I have Ace Alloy AFF06s are I had fitment issues. Had to dremel my rear brake calipers a tiny bit to avoid rubbing there, and I had to trim the wheel well on my quarter panels (would have been rolling them if they were metal, but obviously can't do that on fiberglass) and I also get some rubbing on the front wheel well liner, but yours look like a perfect fit, plus I love that deep dish!
That thing looks terrifyingly FAST!😂
Hey man, your videos are awesome. I can just press play and watch them all because I may C6 owner really wanted to know more about those wheels that you have on the black one I believe you say you have them specially made can you tell me what do I get started to get something like that, thank you
Love the C6 content. She looks insane 🖤🖤🖤
Thanks!
Love ur content!! My boy u need some quick jacks for small stuff like this
You're telling me. Been meaning to order a set
Another great vid Chris. Vette looks amazing. You may have mentioned in another video but I’m curious what you do for a living if you care to share.
He said sales in a previous video.
the sound of boost is intoxicating. even from over here at my desk lol
Love your work dude 👏 👌
Just love your work ethic
car looks so good i had those same rims on my 14 cts v but the offset wasnt rite on them they didnt look that good on mine
Chris, excellent work on the paint! Looks amazing! Do you have a list of all the equipment you use for washing, paint correction, etc.? Also, what are your favorite products to use?
Most are in the description!
Sorry about that. Should have expanded it. Thanks for the reply!@@ChrisSullivan69
You have a stable of tasteful cars man. I have a C6Z, ‘15 Sierra 6.2L with some bolt ons and an L5P.
@@ChuckBeefOG nice!
I finally bought my 1st corvette, a 2006 z06. Could you do a video of the proper way to jack it up and support it with jackstands?
Thanks
I want a C6 badly!! I had a 50th anniv Camaro that I traded in stupidly. The next goal is a project C6. Your vette is sick and sounds outstanding. Im content with HP somewhere in the 700s. Nothing too crazy. Here in Tx I look to LMR in houston for the great work they do. Hoping 2024 will be a profitable one. Great work on that sinister beast!
I love that something in the 700’s HP is no longer “crazy”. 😂😂😂👍🏻
I love that vette u make me want to get one awesome vid keep them coming
Awsome car, My personal opinion I think this car can use a nice set of HREs....FYI still a beautiful car
nice fuel pump in your garage..what fuel octane? and demo that fuel pumper...btw..Vette sounds sick..Oh Lord Sick..
That's e85
New subscriber, great video. Just picked up up a C5 and love it but yours is beautiful. What size are the rear tires, pretty meaty. Keep up the great work and keep inspiring us with the DIY videos.
Thanks! Thise are 345s
I have to say man... with how often you refine the paint on your rigs, and end up NEEEDING to lift another project and can't because your lift is already used or whatever... You should look into a set of Quickjax... I bought some cause I cant put a lift in where I am at now... BUT MAN!!! They are SUPER helpful especially with lower cars when doing buffing or paint refinement!! Most of the Quickjax lift 2 feet//24" or more... and they store easily out of the way, have quick disconnects and do not leak fluid... and they work pretty great! *** Also great videos... your content is solid!
Looking for a deal on a set. Probably gonna end up buying new lol
@@ChrisSullivan69 They do go on sale supposedly at Costco, about this time every year I hear. Good luck man! I think they will be worth while for you.
On my c6, I got about 1/2 inch of space, and can slide them under my car without ramps(quickjax are only 3" in collapsed height)... Even with similar ground kit on... but I am not quite as low as you are.
Love the channel, the way you cut your videos. Have you considered putting new road lamps on the Z06? Morimoto. I like what you put in the Camaro. It looks great. I was watching your latest video and noticed it.
Chris the vette sounds nasty asf love it I hope you never get rid of this one the paint looks so good
windshield looks pretty dark!
I really thought for a second that you are Jiri Procházka
But very good vid.
I agree the vette c6 zo6 is one of the best muscle car
I have one aswell its by texas speed tuned twin turbo borla exhaust manual transmission 2011 wheel hp
Cherry red collor
But damnn the black and bleu is brautifull collor 🤝🔥🔥🔥
Chris can you please let me know where you got your tail lights for your c6?
How the hell doesn't this guy have more subs? Great content!
How do I tag the RUclips algorithm lol
@@ChrisSullivan69 RUclips shorts are the key to get more views and subs
now thats a vette, not that spaceship out there now.
that thing is beautiful